SCHRACK General Purpose Relays Miniature Power PCB RY II & RY II reflow solderable n 1 pole 8 A, 1 CO or 1 NO or 1 NC contact n Low component height 12.3 mm n 5 kV / 8 mm coil-contact n Reinforced insulation (protection class II) n Pinnings: 3.2 and 5 mm n Reflow-solderable version n Sockets with PCB-type terminals n Especially suitable for resistive and inductive loads on NO and NC contacts n Plastic materials according to IEC60335-1 (domestic appliances, not in reflow-solderable version) F0142-E Applications: heating control, interface technology, domestic appliances, timers, temperature control Approvals V REG.-Nr. 5358, Z E214025 Technical data of approved types on request Contact data Contact configuration Contact set Type of interruption Rated voltage / max. switching voltage AC Rated current Maximum breaking capacity AC Contact material Rated frequency of operation with / without load Operate- / release time Bounce time NO / NC contact Contact ratings Type Contact IEC 61810 RY531 NO RY211 NO RY211 NC UL 508 RY211 NO / NC RY211 NO RY211 NO / NC EN60730-1 RY211 NO / NC RY211 NO Load 1 CO or 1NO or 1NC single contact micro disconnection 250 / 400 VAC 8A 2000 VA AgNi0.15, AgSnO2 6 / 1200 min-1 max. 9 / 5 ms max. 6 / 10 ms Ambient temp. [C] Cycles 8 A, 250 VAC 8 A, 250 VAC 8 A, 250 VAC 70C 70C 70C 100x103 75x103 50x103 10 A, 250 VAC, general purpose 1/2 hp, 240 VAC B300 70C 85C 70C 30x103 30x103 6x103 6(4)A, 250 VAC 8(4)A, 250 VAC 85C 75C 100x103 100x103 Coil data Rated coil voltage range DC coil Operative range to IEC 61810 5...60 VDC 2 Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 005 5 3.5 0.5 112+10% 223 006 6 4.2 0.6 162+10% 222 009 9 6.3 0.9 320+10% 253 012 12 8.4 1.2 627+10% 230 024 24 16.8 2.4 2350+10% 245 048 48 33.6 4.8 9391+10% 245 060 60 42.0 6.0 14000+10% 257 All figures are given for coil without preenergization, at ambient temperature +23C Other coil voltages on request 1 Datasheet Rev. JA1 Issued 2010/01 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change. SCHRACK General Purpose Relays Miniature Power PCB RY II & RY II reflow solderable (Continued) Insulation CO contact Dielectric strength coil-contact circuit open contact circuit Clearance / creepage coil-contact circuit Material group of insulation parts Tracking index of relay base Insulation to IEC 61810-1 Type of insulation coil-contact circuit open contact circuit Rated insulation voltage Pollution degree 3 Rated voltage system 230 V V Overvoltage category NO contact 5000 Veff 1000 Veff W 8 / 8 mm IIIa PTI250, PTI 175* PCB layout / terminal assignment Bottom view on solder pins 1 CO contact, 3.2 mm reinforced micro disconnection 250 V 250 V 2 3 230 / 400 V 230 / 400 III III S0254-AA Other data Mechanical endurance 30x106 cycles Material RoHS - Directive 2002/95/EC compliant as per product date code 0403 Resistance to heat and fire according EN60335, par.30** Environment Ambient temperature range -40...+70C Ambient temperature max. 85C at 6A Vibration resistance (function) NO / NC contact 20 / 5 g Shock resistance (function) NO / NC contact 20 / 5 g Shock resistance (destruction) 100 g Category of protection RTII - flux proof, RTIII - wash tight** Processing Mounting pcb Mounting position any Minimum mounting distance W 0 mm Soldering heat resistance flux proof version 270C / 10 s wash tight version 260C / 5 s Relay weight 8g Packaging unit, standard version 20 / 500 pcs reflow version 1120 pcs S0254-AB 1 NO, 1 NC contact 5 mm S0254-AC Accessoires For technical details see datasheet Accessoires RYII * reflow-solderable version ** not as reflow-solderable version Pinning 3.2 mm Dimensions S0254-AE S0274-CA S0254-AD Pinning 5 mm S0254-AF S0274-CB 2 Datasheet Rev. JA1 Issued 2010/01 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change. SCHRACK General Purpose Relays Miniature Power PCB RY II & RY II reflow solderable (Continued) Soldering profile for reflow-solderable version Product key Typical product key RY 6 1 1 012 Type RY Miniature Power PCB Relay RY II & RY II reflow-solderable Version 2 pinning 3.2 mm, flux proof 6 pinning 3.2 mm, wash tight **) 5 pinning 5 mm, flux proof A pinning 5 mm, wash tight **) Contact configuration 1 1 CO contact (1 form C), pinning 3.2 mm 3 1 NO contact (1 form A), pinning 5 mm 5 1 NC contact (1 form B), pinning 5 mm Contact material 1 AgNi 0.15 2 AgNi 0.15 gold plated 3 AgSnO2 Coil Coil code: please refer to coil versions table Version Blank standard version R reflow-solderable **) not as reflow-solderable version Other types on request 3 Datasheet Rev. JA1 Issued 2010/01 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change. SCHRACK General Purpose Relays Miniature Power PCB RY II & RY II reflow solderable (Continued) Product key RY211005 RY211012 RY211024 RY211048 RY212005 RY212012 RY212024 RY212048 RY213005 RY213012 RY213024 RY213048 RY531005 RY531012 RY531024 RY531048 RY532012 RY532024 RY533012 RY533024 RY533048 RY611005 RY611012 RY611024 RY611048 RY612005 RY612012 RY612024 RY612048 RY613005 RY613012 RY613024 RY613048 RYA31005 RYA31012 RYA31024 RYA31048 RYA32005 RYA32012 RYA32024 RYA33005 RYA33024 Version pinning 3.2 mm flux proof Contacts 1 CO contact Contact material AgNi 0.15 AgNi 0.15 gold plated AgSnO2 pinning 5 mm flux proof 1 NO contact AgNi 0.15 AgNi 0.15 gold plated AgSnO2 pinning 3.2 mm wash tight 1 CO contact AgNi 0.15 AgNi 0.15 gold plated AgSnO2 pinning 5 mm wash tight 1 NO contact AgNi 0.15 AgNi 0.15 gold plated AgSnO2 Coil 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 48 VDC 5 VDC 12 VDC 24 VDC 5 VDC 24 VDC Part number 4-1393224-2 4-1393224-6 4-1393224-9 5-1393224-1 5-1393224-2 5-1393224-5 5-1393224-8 5-1393224-9 6-1393224-0 6-1393224-1 6-1393224-2 6-1393224-3 7-1393224-6 7-1393224-9 8-1393224-2 8-1393224-3 8-1393224-4 8-1393224-5 8-1393224-8 8-1393224-9 9-1393224-0 1-1393225-7 1-1393225-9 2-1393225-1 2-1393225-2 2-1393225-3 2-1393225-6 2-1393225-9 3-1393225-0 5-1419136-2 3-1393225-1 3-1393225-3 3-1393225-4 1393224-7 1393224-9 1-1393224-2 1-1393224-3 1-1393224-4 1-1393224-6 1-1393224-8 1-1393224-9 2-1393224-1 4 Datasheet Rev. JA1 Issued 2010/01 www.tycoelectronics.com www.schrackrelays.com Dimensions are in mm unless otherwise specified and are shown for reference purposes only. Product specification according to IEC 61810-1. Product data, technical parameters, test conditions and processing information only to be used together with the 'Definitions' section in the catalogue or at schrackrelays.com in the `Schrack' section. Specifications subject to change.