RO3101 * * * * * Ideal for 433.92 MHz Transmitters Very Low Series Resistance Quartz Stability Rugged, Hermetic, Low-Profile TO39 Case Complies with Directive 2002/95/EC (RoHS) 433.92 MHz SAW Resonator Pb The RO3101 is a true one-port, surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It provides reliable, fundamental-mode, quartz frequency stabilization of fixed-frequency transmitters operating at 433.92 MHz. The RO3101 is designed specifically for remote-control and wireless security transmitters operating in Europe under ETSI I-ETS 300 220 and in Germany under FTZ 17 TR 2100. Absolute Maximum Ratings Rating Value Units +0 dBm CW RF Power Dissipation DC Voltage Between Any Two Pins Case Temperature 30 VDC -40 to +85 C 260 C Soldering Temperature (10 seconds / 5 cycles Max.) TO39-3 Case Electrical Characteristics Characteristic Center Frequency (+25 C) Absolute Frequency Sym fC Tolerance from 433.920 MHz fC Unloaded Q QU 50 Loaded Q QL Turnover Temperature TO Insertion Loss Quality Factor Temperature Stability 2, 3, 4, 5 IL Turnover Frequency Frequency Aging Notes fO 6, 7, 8 Absolute Value during the First Year |fA| 75 kHz 2.0 dB 40 C fc + 2.7 kHz 0.037 ppm/C2 ppm/yr 1.0 M 13.7 5, 7, 9 37.1 H 3.6 fF CO 5, 6, 9 2.7 pF CP 5, 6, 7, 9 2.5 pF LTEST 2, 7 50.0 nH Motional Resistance RM Motional Inductance LM Motional Capacitance CM Pin 1 to Pin 2 Static Capacitance Transducer Static Capacitance Test Fixture Shunt Inductance 25 10 1 5 Units MHz 900 10 FTC Maximum 433.995 7400 5, 6, 7 Frequency Temperature Coefficient Typical 1.5 2, 5, 6 DC Insulation Resistance between Any Two Pins RF Equivalent RLC Model Minimum 433.845 Lid Symbolization (in Addition to Lot and/or Date Codes) RFM RO3101 CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. 5. 6. Frequency aging is the change in fC with time and is specified at +65C or less. Aging may exceed the specification for prolonged temperatures above +65C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years. The center frequency, fC, is measured at the minimum insertion loss point, ILMIN, with the resonator in the 50 test system (VSWR 1.2:1). The shunt inductance, LTEST, is tuned for parallel resonance with CO at fC. Typically, fOSCILLATOR or fTRANSMITTER is less than the resonator fC. One or more of the following United States patents apply: 4,454,488 and 4,616,197 and others pending. Typically, equipment designs utilizing this device require emissions testing and government approval, which is the responsibility of the equipment manufacturer. Unless noted otherwise, case temperature TC = +25C2C. The design, manufacturing process, and specifications of this device are www.RFM.com E-mail: info@rfm.com (c)2008 by RF Monolithics, Inc. 7. 8. 9. subject to change without notice. Derived mathematically from one or more of the following directly measured parameters: fC, IL, 3 dB bandwidth, fC versus TC, and CO. Turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fO. The nominal frequency at any case temperature, TC, may be calculated from: f = fO [1 - FTC (TO -TC)2]. Typically, oscillator TO is 20C less than the specified resonator TO. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance CO is the static (nonmotional) capacitance between pin1 and pin 2 measured at low frequency (10 MHz) with a capacitance meter. The measurement includes case parasitic capacitance with a floating case. For usual grounded case applications (with ground connected to either pin 1 or pin 2 and to the case), add approximately 0.25 pF to CO. Page 1 of 2 RO3101 - 3/26/08 Electrical Connections Temperature Characteristics Pin Connection 1 Terminal 1 2 Terminal 2 3 Case Ground Bottom View Pin 1 The curve shown on the right accounts for resonator contribution only and does not include oscillator temperature characteristics. fC = f O , T C = T O 0 0 -50 -50 -100 -100 -150 -150 (f-fo ) / fo (ppm) This one-port, two-terminal SAW resonator is bidirectional. The terminals are interchangeable with the exception of circuit board layout. Pin 2 -200 -80 -60 -40 -20 Pin 3 -200 0 +20 +40 +60 +80 T = T C - T O ( C ) Typical Test Circuit The test circuit inductor, LTEST, is tuned to resonate with the static capacitance, CO at FC. Electrical Test: Equivalent LC Model The following equivalent LC model is valid near resonance: 2 1 Network Analyzer Network Analyzer 1 2 3 Co= Cp + 0.25 pF* Cp *Case Parasitics R M L M C M Power Test: 0.5 pF* 0.5 pF* 1 P INCIDENT Low-Loss Matching Network to 50 50 Source at P REFLECTED F C 3 Case Design 3 2 C G B -P P INCIDENT REFLECTED CW RF Power Dissipation = H Typical Application Circuits F E A Typical Low-Power Transmitter Application: Modulation Input 200k D (3 places) MPS-H10 J (2 places) +9VDC 47 C1 1 (Antenna) 2 Millimeters C2 ROXXXX Bottom View Output L1 +VDC 2 Bottom View 3 9.40 B 3.18 2.50 RF Bypass www.RFM.com E-mail: info@rfm.com (c)2008 by RF Monolithics, Inc. 3.50 Min Max 0.370 0.125 0.098 0.138 D 0.46 Nominal 0.018 Nominal E 5.08 Nominal 0.200 Nominal F 2.54 Nominal 0.100 Nominal G 2.54 Nominal 0.100 Nominal H C2 ROXXXX Max A C Typical Local Oscillator Application: 1 Min RF Bypass 470 +VDC Inches Dimensions 3 C1 45 L1 J 1.02 1.40 0.040 0.055 Page 2 of 2 RO3101 - 3/26/08