silicon power transistors NPN 10-66 lojwax} = 1.0 to 7.0A Voeoisus) = 35 to 350V fr = 0.75 to 60 MHz hre Is/p @ Ic/Vce Vce(sat) Vee Icev Po @ @ Vcr ton torr | Vceo(sus} {(Min-Max ic/IB @ Ic/Vce @Vce |Tc=25C|] Gc | t=1sec} fr @ Ic/Is @ Ic/I\p Generic General Type # (Volts) @ R/V) (V @ A/A) (V@ A/V) |(mA @ V)| (Watts) | (C/W)| (A @ V) }(MHz)] (us @ A/A) | (us @ A/A)] Product | Information 2N3054 55 20-100@.5/4 |1@.5/.05 1.7@.5/4 1.0@90 29 6.0 2N3054 General $T040250 40 25-100@1.5/4 |1.5@1.5/.15 |2.2@1.5/4 11@30 29 6.0 Family: Furpose $TC40310 35 20-120@1/2 1.4@1/2 .01'1@15 29 6.0 75 Mil Chip. | Switch and $TC40312 | 60(Vcer)| 20-120@1/2 1.4@1/2 .011@15 23 6.0 75 Single Amplifier. $TC40316 | 40(Vcer)| 20-120@1/2 1.4@1/2 .01'@15 29 6.0 75 Diffused Consumer and $T40324 35 | 20-120@1/2 14@1/2 0N@15 29 6.0 75 Clip Leads. | Usage. Typical Case 620 Values 60 20-120@1/2 |1@1.5/.15 1.2@1/2 011@15 29 6.0 |.6@48 1.0 /3@1/1 6@1/.1 2N3441 140 20-80@.5/4 |1@.5/.05 1.7@.5/4 1@140 25 7.0 |,24@120 2N3441 General Family. Purpose 115x115 | Power Mil Chip. { Switch and Single Amplifier. Diffused Consumer and Process. Industria! Typical Clip Leads. | Usage. Values 150 20-120@.5/4 |1@.5/.05 1.5@.5/4 1@140 29 6.0 [|24@120 |1.0 |3@1/.1 6@1/.1 Case 620 ae : wee st STA5202 STAS427, | STA5428 STAS429. STA5430 | $50@.5/10 575@.5/10 NOTES: Vicer @ Vce (mA @ V) 3 Veesat) @ Ic/ls (V @ A/A) NPN 10-53 lewaxy = 3.0A Vceo;sus; = 60 to 80V f; = 1.0 MHz hre Iso @ Ic/Vce Vce(sAt) Vee Icev Po @ @ Vce Vceo;sus) {Min-Max @ Ic/Ip @ Ic/Vce @ Vce Tc = 25C duc t= 1sec fr Generic General Type # (Volts) @ A/) V@A/A) | W@AN) | (ms @vV: | (Watts) ec/w) | (A@V) | (MHz) Product Information 2N389 60(Vcex) | 12-60@1/15 | 5@1/.2 8@1.5/15 | 10@60 85 2.2 1.0 |2N389 Family. _| General Purpose 2N389A 60(Vcer) | 12-60@1/4 .75@1/.2 | 2.5@1.5/4 | 104@60 85 2.06 1.0 ao x MOM Ghip. Power Switch and 2N424 80(Vcrr) | 12-60@1/15 | 10@1/.2 | 8@.75/15 | 10@60 85 2.2 10 [Pree Se Industrial and 2N424A | 80(Vcer) | 12-60@1/4 .75@1/.2 | 2.5@1.5/4 | 10@60 85 2.06 1.0 {Clip Leads. Military Usage. Typical Case 330 Values 70 15-100@1/4 | .6@1/.2 | 1.8@1.5/4 | 5@60 85 2.2 4.25@20 | 1.0 10 4 Available with gold plated leads on special request.