e3
DS30757 Rev. 5 - 2 1 of 3 SBL30L30CT
www.diodes.com ãDiodes Incorporated
SBL30L30CT
30A DUAL LOW VF SCHOTTKY BARRIER RECTIFIER
Features
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
·Case: TO-220AB
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Tin Finish. Solderable per MIL-STD-202,
Method 208
·Polarity: See Diagram
·Marking: Type Number
·Ordering Information: See Sheet 3
·Weight: 2.24 grams (approximate)
Mechanical Data
L
M
A
N
P
D
E
K
C
B
G
12 3
J
HH
Pin 1
Pin 3
Pin 2
Case
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
30 V
RMS Reverse Voltage VR(RMS) 21 V
Average Rectified Output Current @ TC= 140°C Total Device
Per Element IO30
15 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave Superimposed on Rated Load
Per Element
IFSM 260 A
Peak Repetitive Reverse Current Per Element at tP= 2ms, 1 KHz IRRM 1.0 A
Voltage Rate of Change dV/dt 10,000 V/ms
Typical Thermal Resistance Junction to Case Per Diode
(Note 2) Total RqJC 1.5
0.8 °C/W
Operating Temperature Range Tj-65 to +150 °C
Storage Temperature Range TSTG -65 to +150 °C
Notes: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see
EU Directive Annex, Notes 5 and 7.
2. Thermal Resistance Junction to Case: Device mounted on 200x200x5mm aluminum plate.
3. Short duration test pulse used to minimize self-heating effect.
·Low Power Loss, High Efficiency
·Guard Ring for Transient Protection
·High Surge Capability
·Very Low Forward Voltage Drop
·For Use in High Frequency Inverters, Free Wheeling, and
Polarity Protection Applications
·Lead Free Finish, RoHS Compliant (Note 1)
NEW PRODUCT
Maximum Ratings @ TA= 25°C unless otherwise specified
Electrical Characteristics @ TA= 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 3) V(BR)R 30 ¾¾VIR= 1.5mA
Forward Voltage Per Element VF
¾
¾
¾
¾
¾
¾
0.52
¾
0.46
0.38
0.57
0.50
V
@ IF= 15A, Tj= 25°C
@ IF= 15A, Tj= 125°C
@ IF= 30A, Tj= 25°C
@ IF= 30A, Tj= 125°C
Peak Reverse Current Per Element (Note 3) IR¾
¾
¾
¾
1.0
300
mA
mA
@ VR= 30V, Tj= 25°C
@ VR= 30V, Tj= 125°C
TO-220AB
Dim Min Max
A14.22 15.88
B9.65 10.67
C2.54 3.43
D5.84 6.86
E¾6.35
G12.70 14.73
H2.29 2.79
J0.51 1.14
K3.53Æ4.09Æ
L3.56 4.83
M1.14 1.40
N0.30 0.64
P2.03 2.92
All Dimensions in mm
DS30757 Rev. 5 - 2 2 of 3 SBL30L30CT
www.diodes.com
1m
10m
0.1
1
5
025
20
15
10 30
V , INSTANTANEOUS REVERSE VOLTAGE (V)
Fig. 4 Typical Reverse Characteristics, Per Element
R
I , INSTANTANE
O
US REVERSE CURRENT (A)
R
T = -65ºC
A
T = -40ºC
A
T = 25ºC
A
T = 85ºC
A
T = 125ºC
A
T = 150ºC
A
0
10
20
30
25 50 75 100 125 150 175
4
0
I AVERAGE FORWARD CURRENT (A)
F(AV),
T , CASE TEMPERATURE ( C)
Fi
g
. 1 Forward Current Deratin
g
Curve
C
°
Per Element
T
Total Device
0
100
150
50
200
300
250
12510 20 50 100
I , PEAK F
O
RWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fig. 2 Maximum Non-Repetitive Surge Current, Per Elemen
t
8.3 ms single half-sine-wave
NEW PRODUCT
1
10
100
1000
10,000
100,000
00.1 0.2 0.3 0.5 0.6
0.4
I , INSTANTANE
O
US F
O
RWARD CURRENT (mA)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 3 Typical Forward Characteristics, Per Element
F
T = -65ºC
A
T = -40ºC
A
T = 25ºC
A
T = 85ºC
A
T = 125ºC
A
T = 150ºC
A
100
C , TOTAL CAPACITANCE (pF)
T
V , REVERSE VOLTAGE (V)
Fi
g
.5 T
y
pical Total Capacitance, Per Element
R
1000
10
,
000
0510 15 20 25 30
f=1MHz
DS30757 Rev. 5 - 2 3 of 3 SBL30L30CT
www.diodes.com
NEW PRODUCT
Notes: 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Device Packaging Shipping
SBL30L30CT TO-220AB 50/Tube
Ordering Information (Note 4)
IMPORTANT NOTICE
LIFE SUPPORT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
