All specifications are subject to change without notice.
Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
Issue date : January 2014
3-terminal Filters
Type: YFF15PC 1005 [0402 inch]* Feed through filter
YFF18PC 1608 [0603 inch]* Feed through filter
YFF18PH 1608 [0603 inch]* Feed through filter
YFF18PW 1608 [0603 inch]* Feed through filter
YFF21PC 2012 [0805 inch]* Feed through filter
YFF31PC 3216 [1206 inch]* Feed through filter
* Dimensions Code JIS[EIA]
For Power Line
YFF-P Series
001-01 / 20140110 / emc_esr_yff-p_en.fm
All specifications are subject to change without notice.
(1/9)
3-terminal Filters
For Power Line
FEATURES
Small and high-performance EMC components.
Good attenuation characteristic in a wide band range.
For large current (2A to 4A) applications
APPLICATIONS
For the power line of communication terminal devices, such as a smart phone, and AV and information devices.
PART NUMBER IDENTIFICATION
PACKAGING STYLE AND SPECIFICATIONS
In the case of YFF15PC0G435M, the weight is 0.0015g.
Overview of YFF-P Series
YFF 15 PC 0G 435 M T 0 N
Series
name
L×W
dimensions
Product
internal
code
Rated
voltage Capacitance Tolerance Taping
TDK
internal
code
Reel size Internal
electrode
Ni
Code mm Code VCode pF Code mm
15 1.0×0.5 PC STD 0G 4 105 1,000.000
(1.0µF)
M±20％0ø178
18 1.6×0.8 PH Thickness:
0.8mm
0J 6.3 9ø330
21 2.0×1.2 1A 10
31 3.2×1.6 PW Low ESL 1C 16
1E 25
1H 50
Type Package quantity (piece/reel) Single weight (g)
ø178 ø330
YFF15PC 10,000 50,000 0.0008
YFF18PC 4,000 10,000 0.0038
YFF18PH 4,000 10,000 0.0051
YFF18PW 4,000 10,000 0.0038
YFF21PC 4,000 10,000 0.0095
YFF31PC 2,000 8,000 0.0342
Conformity to RoHS Directive
Lead-free Compatible
Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
001-01 / 20140110 / emc_esr_yff-p_en.fm
All specifications are subject to change without notice.
(2/9)
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
HAND SOLDERING
PRECAUTIONS FOR USE
Before soldering, be sure to preheat components. The T pre-
heating temperature must be 150°C max. with attention paid to
thermal shock.
Natural cooling of components in the air is recommended. On
the other hand, when dipping them in a solvent for purposes,
such as cleaning, make sure that the temperature difference
(T) is 100°C.
When performing hand soldering for circuit modification, apply
the soldering iron to the copper foil area of the printed circuit
board for 3 seconds or less. The temperature of the iron tip
should not exceed 300°C.
Use a wrist band to discharge static electricity in your body
through the grounding wire.
When incorporating the printed circuit board on which this prod-
uct is mounted into a frame, etc., do not apply stress to the prod-
uct through local bending of the board by tightening of screws,
etc.
Overview of YFF-P Series
Preheating
Soldering
Slow cooling
(Natural cooling)
60 seconds or more
0
260˚C max.
10s max.
Temperature(˚C)
150˚C max.
Preheating
300
Make as short as possilble (within three seconds)
0
Temperature(˚C)
150˚C max.
001-01 / 20140110 / emc_esr_yff-p_en.fm
All specifications are subject to change without notice.
(3/9)
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS RATED CURRENT vs. TEMPERATURE CHARACTERISTICS
(DERATING)
YFF-P Series
YFF15PC Type(Feed Through Filter)
Part No. L W T
YFF15PC0G435MT00 N 1.05±0.05 0.65±0.05 0.45±0.05
YFF15PC0G105MT00 N 1.00±0.05 0.55±0.05 0.30±0.05
YFF15PC0J474MT00 N 1.00±0.05 0.55±0.05 0.30±0.05
YFF15PC1A224MT00 N 1.00±0.05 0.55±0.05 0.30±0.05
YFF15PC1C104MT00 N 1.00±0.05 0.55±0.05 0.30±0.05
Part No. Capacitance
(µF)
Tolerance
(%)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
YFF15PC0G435MT00 N 4.3 20 4 2.0 –55 to +85 –55 to +85
YFF15PC0G105MT00 N 1.0 20 4 3.0 –55 to +105 –55 to +105
YFF15PC0J474MT00 N 0.47 20 6.3 3.0 –55 to +105 –55 to +105
YFF15PC1A224MT00 N 0.22 20 10 3.0 –55 to +105 –55 to +105
YFF15PC1C104MT00 N 0.1 20 16 3.0 –55 to +105 –55 to +105
0.30
±
0.08
L
2
GND
GND
4
1
IN/OUT
3
OUT/IN
W
0.17
±
0.08
T
0.700.30
0.19
0.60
0.25 0.25
Land pattern+Solder resist
Land pattern
Dimensions in mm
0
10
20
30
40
50
60
70
80
900.1 1 10 100 1000 10000
Frequency(MHz)
Insertion loss(dB)
0G105
0J474
1A224
1C104
0G435
–55 –35 –15 5 25 45 65 85 105 125
Ambient temperature(°C)
0
1
2
3
4
5
Rated current(A)
0G105, 0J474, 1A224, 1C104
0G435
001-01 / 20140110 / emc_esr_yff-p_en.fm
All specifications are subject to change without notice.
(4/9)
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS RATED CURRENT vs. TEMPERATURE CHARACTERISTICS
(DERATING)
YFF-P Series
YFF18PC Type(Feed Through Filter)
Part No. Capacitance
(µF)
Tolerance
(%)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
YFF18PC0J475MT0H N 4.7 20 6.3 4.0 –55 to +85 –55 to +85
YFF18PC0J105MT0H N 1.0 20 6.3 4.0 –55 to +105 –55 to +105
YFF18PC0J474MT0H N 0.47 20 6.3 4.0 –55 to +125 –55 to +125
YFF18PC1C104MT0H N 0.1 20 16 4.0 –55 to +125 –55 to +125
0.40
±
0.10
1.60
±
0.10
0.80±0.10
0.1min.
0.60±0.10
2
GND
GND
4
1
IN/OUT
3
OUT/IN
1.000.60
0.40
0.60
0.400.40
Land pattern+Solder resist
Land pattern
Dimensions in mm
–55 –35 –15 5 25 45 65 85 105 125
Ambient temperature(˚C)
0
1
2
3
4
5
Rated current(A)
0J474, 1C104
0J105
0J475
001-01 / 20140110 / emc_esr_yff-p_en.fm
All specifications are subject to change without notice.
(5/9)
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS RATED CURRENT vs. TEMPERATURE CHARACTERISTICS
(DERATING)
YFF-P Series
YFF18PH Type(Feed Through Filter)
Part No. Capacitance
(µF)
Tolerance
(%)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
YFF18PH0J225MT00 N 2.2 20 6.3 4.0 –55 to +85 –55 to +85
YFF18PH0J105MT00 N 1.0 20 6.3 4.0 –55 to +105 –55 to +105
0.80±0.10
0.40
±
0.10
1.60
±
0.10
0.80±0.10
0.1min.
2
GND
GND
4
1
IN/OUT
3
OUT/IN
1.000.60
0.40
0.60
0.400.40
Land pattern+Solder resist
Land pattern
Dimensions in mm
–55 –35 –15 5 25 45 65 85 105 125
Ambient temperature(˚C)
0
1
2
3
4
5
Rated current(A)
0J105
0J225
001-01 / 20140110 / emc_esr_yff-p_en.fm
All specifications are subject to change without notice.
(6/9)
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS
RATED CURRENT vs. TEMPERATURE CHARACTERISTICS
(DERATING)
YFF-P Series
YFF18PW Type(Feed Through Filter)
Part No. Capacitance
(µF)
Tolerance
(%)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
YFF18PW0J475MT0H N 4.7 20 6.3 4.0 –55 to +85 –55 to +85
YFF18PW0J105MT0H N 1.0 20 6.3 4.0 –55 to +105 –55 to +105
YFF18PW0J474MT0H N 0.47 20 6.3 4.0 –55 to +125 –55 to +125
0.15
±
0.10
0.40±0.10
0.80
+0.20
–0.10
0.15
±
0.10
1.60
±
0.10
0.80±0.10
0.60±0.10
2
GND
GND
4
1
IN/OUT
3
OUT/IN
0.400.40
1.200.40
0.80
0.40
Land pattern+Solder resist
Land pattern
Dimensions in mm
–55 –35 –15 5 25 45 65 85 105 125
Ambient temperature(˚C)
0
1
2
3
4
5
Rated current(A)
0J105
0J475
0J474
001-01 / 20140110 / emc_esr_yff-p_en.fm
All specifications are subject to change without notice.
(7/9)
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS
YFF-P Series
YFF21PC Type(Feed Through Filter)
Part No. Capacitance
(µF)
Tolerance
(%)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
YFF21PC0J226MT00 N 22 20 6.3 4.0 –55 to +85 –55 to +85
YFF21PC0J106MT00 N 10 20 6.3 4.0 –55 to +85 –55 to +85
YFF21PC1A475MT00 N 4.7 20 10 3.0 –55 to +85 –55 to +85
YFF21PC1A225MT00 N 2.2 20 10 2.0 –55 to +85 –55 to +85
YFF21PC1A105MT00 N 1.0 20 10 4.0 –55 to +85 –55 to +85
YFF21PC1C474MT00 N 0.47 20 16 2.0 –55 to +125 –55 to +125
YFF21PC1E104MT00 N 0.10 20 25 2.0 –55 to +125 –55 to +125
0.40
±
0.15
2.00
±
0.20
1.25±0.20
0.30
±
0.10
0.85±0.15
2
GND
GND
4
1
IN/OUT
3
OUT/IN
1.400.60
0.50
0.80
0.60 0.65
Land pattern+Solder resist
Land pattern
Dimensions in mm
001-01 / 20140110 / emc_esr_yff-p_en.fm
All specifications are subject to change without notice.
(8/9)
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS
YFF-P Series
YFF31PC Type(Feed Through Filter)
Part No. Capacitance
(µF)
Tolerance
(%)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
YFF31PC0J226MT00 N 22 20 6.3 4.0 –55 to +85 –55 to +85
YFF31PC1C105MT00 N 1.0 20 16 2.0 –55 to +125 –55 to +125
YFF31PC1C474MT00 N 0.47 20 16 2.0 –55 to +125 –55 to +125
YFF31PC1C224MT00 N 0.22 20 16 2.0 –55 to +125 –55 to +125
YFF31PC1C104MT00 N 0.10 20 16 2.0 –55 to +125 –55 to +125
0.95
±
0.25 0.40
±
0.20
3.20
±
0.20
1.60±0.201.30±0.20
2
GND
GND
4
1
IN/OUT
3
OUT/IN
2.501.20
1.40
1.30
0.80 0.90
Land pattern+Solder resist
Land pattern
Dimensions in mm
001-01 / 20140110 / emc_esr_yff-p_en.fm
All specifications are subject to change without notice.
(9/9)
REEL DIMENSIONS
Dimensions in mm
TAPE DIMENSIONS
Paper tape(Apply to the product less than 1.0 mm thick)
Dimensions in mm
Plastic tape
Dimensions in mm
YFF-P Series Packing Style
Reel A B C D E W t r
ø178 ø178±2.0 ø60±2.0 ø13±0.5 ø21±0.8 2.0±0.5 9.0±0.3 2.0±0.05 1.0
ø330 ø382 max.(ø330 nom.) ø50 min. ø13±0.5 ø21±0.8 2.0±0.5 10.0±1.5 2.0±0.05 1.0
Ty p e A B C D E F G H J t
YFF15PC 0.62 typ. 1.12 typ. 8.0±0.3 3.5±0.05 1.75±0.1 2.0±0.1 2.0±0.05 4.0±0.1 ø1.5+0.1/–0 1.1 max.
YFF18PC
1.10 typ. 1.90 typ. 8.0±0.3 3.5±0.05 1.75±0.1 4.0±0.1 2.0±0.05 4.0±0.1 ø1.5+0.1/–0 1.1 max.YFF18PH
YFF18PW
YFF21PC 1.50 typ. 2.30 typ. 8.0±0.3 3.5±0.05 1.75±0.1 4.0±0.1 2.0±0.05 4.0±0.1 ø1.5+0.1/–0 1.1 max.
A
C
E
D
r
B
Wt
ED
C
B
Round sprocket holes Square punch hole for component mountingJ
tAHGF
Ty p e A B C D E F G H J K t Q
YFF31PC 1.90 typ. 3.50 typ. 8.0±0.3 3.5±0.05 1.75±0.1 4.00±0.1 2.0±0.05 4.00±0.1 ø1.5+0.1/–0 2.50 max. 0.30 max. ø0.50 max.
ED
C
B
Round sprocket holes Square punch hole for component mountingJ
t
K
AHGF Q
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TDK:
YFF15PC0G435M YFF18PC0J105M YFF18PC0J224M YFF18PC0J474M YFF18PC1C104M YFF21PC1C474M