Dual-Sensor Package
Two Sensors in One SMD Packge
The new SMD package (PG-TDSO) includes two independent sensors with separate power
supply and separate signal outputs. Due to special mounting technology, Infineon is able
to keep dual-sensor package size very small to enable compact PCB layouts and small
magnet sizes.
Infineon oers linear Hall sensors or angle sensors in the PG-TDSO package. The two
sensors in one package oer Inherent redundancy. Sensor redundancy is of particular
interest for new generation EPS steering systems with increased ISO 26262 requirements
and other safety critical applications. All sensors are automotive qualified.
Most products are also available as single-sensor solution with only one sensor.
Features
Two sensors in one package
Separate power supply and
signal output
Automotive qualified
Temperature range from
-40°C to +125°C
Outstanding quality
Linear Hall or angle sensor available
Single-sensor versions available
16-pin and 8-pin versions available
Product Brief
www.infineon.com/dual-sensor
Top Die
Side View
Sensing
Element
Bottom Die
Leadframe
Insulating Glue
Dual-Sensor Package
Two Sensors in One SMD Packge
Product Brief
Published by
Infineon Technologies AG
85579 Neubiberg, Germany
© 2014 Infineon Technologies AG.
All Rights Reserved.
Visit us:
www.infineon.com
Order Number: B142-H9909-X-X-7600
Date: 05 / 2014
Attention please!
The information given in this document shall in no event
be regarded as a guarantee of conditions or characteristics
(“Beschaenheitsgarantie”). With respect to any examples
or hints given herein, any typical values stated herein and/
or any information regarding the application of the device,
Infineon Technologies hereby disclaims any and all warran-
ties and liabilities of any kind, including without limitation
warranties of non-infringement of intellectual property
rights of any third party.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Oice (www.infineon.com).
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technolo-
gies Oice. Infineon Technologies Components may only
be used in life-support devices or systems with the express
written approval of Infineon Technologies, if a failure of
such components can reasonably be expected to cause
the failure of that life-support device or system, or to aect
the safety or eectiveness of that device or system. Life
support devices or systems are intended to be implant-
ed in the human body, or to support and/or maintain and
sustain and/or protect human life. If they fail, it is reasonable
to assume that the health of the user or other persons may
be endangered.
Linear Halls
Product Interface Dual-/Single-Sensor Available Package Order Code
TLE4997A8D Analog yes/yes PG-TDSO-8 SP000902760
TLE4998P8D PWM yes/yes PG-TDSO-8 SP000902776
TLE4998S8D SENT yes/yes PG-TDSO-8 SP000902784
TLE4998C8D SPC yes/yes PG-TDSO-8 SP000902768
Angle Sensors
Product Interface Technology Description Package Order Code
TLE5309D Analog sin/cos GMR and AMR Dual-Sensor 3.3V with temperature compensation PG-TDSO-16 SP001191262
TLE5309D Analog sin/cos GMR and AMR Dual-Sensor 5.0V with temperature compensation PG-TDSO-16 SP001191266
TLE5012BD E1200 IIF Standard, 360° angle GMR Dual-Sensor 3.3/5.0V with temperature compensation PG-TDSO-16 SP001205296
TLE5012BD E9200 SPC, 360° angle GMR Dual-Sensor 3.3/5.0V with temperature compensation PG-TDSO-16 SP001205300
EPS Motor
Steering Angle
Steering Torque
Angle SensorsLinear Hall
