HDSP-G01x/G03x 10.16 mm (0.4 inch) Dual Digit General Purpose Seven-Segment Display Data Sheet Description This 10.16 mm (0.4 inch) LED dual digit sevensegment display uses industry standard size package and pinout. The device is available in either common anode or common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red, and Yellow. The gray face displays are suitable for indoor use. Applications * Suitable for indoor use * Not recommended for industrial application, i.e., operating temperature requirements exceeding +85C or below -25C[1] * Extreme temperature cycling not recommended Note: 1. For additional details, please contact your local Avago sales office or an authorized distributor. Features * Industry standard size * Industry standard pinout 10.16 mm (0.4 inch) DIP lead on 2.54 mm * Choice of colors High Efficiency Red (HER), Green, AlGaAs Red and Yellow * Excellent appearance Evenly lighted segments gray package gives optimum contrast 50 viewing angle * Design flexibility Common anode or common cathode * Categorized for luminous intensity Green and yellow categorized for color Devices HER HDSP-G01E HDSP-G03E Green HDSP-G01G HDSP-G03G AlGaAs Red HDSP-G01A HDSP-G03A Yellow HDSP-G01Y HDSP-G03Y Description Common Anode Common Cathode Part Numbering System 5082 -X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] A: AlGaAs Red E: High Efficiency Red G: Green Y: Yellow Device Specific Configuration[1] Refer to Respective Datasheet Package[1] G: 10 mm (0.4 inch) Dual Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 2 Package Dimensions FRONT VIEW SIDE VIEW 10.16 (0.400) 4.16 (0.164) 8 16.00 10.16 (0.630) (0.400) 1.10 (0.043) 12.70 (0.500) 16.00 (0.630) 0.70 (0.028) PIN 1 5.90 (0.232) 6.90 (0.272) 20.20 (0.795) TOP END VIEW 20.20 (0.795) DATE CODE F DIG.2 A A G E HDSP-XXXX YWW XZ COO B C D F G E B C D COUNTRY OF ORIGIN LUMINOUS INTENSITY CATEGORY COLOR BINNING (NOTE 3) 0.51 (0.019) 2.54 x 7 (0.100) DIMENSIONS ARE IN MILLIMETERS (INCHES). 3 DIG.1 NOTE: DECIMAL POINTS WILL NOT BE LIGHTED UP Internal Circuit Diagram COMMON ANODE 4 COM A 15 B 13 C 1 5 COM D 3 E 2 F 14 G 16 A 10 B 12 C 8 D 6 E 7 F 11 G 9 HDSP-G01E/G01G/G01Y/G01A PIN No. CONNECTION 1 CATHODE C (DIGIT 1) 2 CATHODE E (DIGIT 1) 3 CATHODE D (DIGIT 1) 4 COMMON ANODE (DIGIT 1) 5 COMMON ANODE (DIGIT 2) 6 CATHODE D (DIGIT 2) 7 CATHODE E (DIGIT 2) 8 CATHODE C (DIGIT 2) 9 CATHODE G (DIGIT 2) 10 CATHODE A (DIGIT 2) 11 CATHODE F (DIGIT 2) 12 CATHODE B (DIGIT 2) 13 CATHODE B (DIGIT 1) 14 CATHODE F (DIGIT 1) 15 CATHODE A (DIGIT 1) 16 CATHODE G (DIGIT 1) COMMON CATHODE 4 COM A 15 B 13 C 1 D 3 5 COM E 2 F 14 G 16 A 10 B 12 C 8 D 6 HDSP-G03E/G03G/G03Y/G03A 4 PIN No. CONNECTION 1 ANODE C (DIGIT 1) 2 ANODE E (DIGIT 1) 3 ANODE D (DIGIT 1) 4 COMMON CATHODE (DIGIT 1) 5 COMMON CATHODE (DIGIT 2) 6 ANODE D (DIGIT 2) 7 ANODE E (DIGIT 2) 8 ANODE C (DIGIT 2) 9 ANODE G (DIGIT 2) 10 ANODE A (DIGIT 2) 11 ANODE F (DIGIT 2) 12 ANODE B (DIGIT 2) 13 ANODE B (DIGIT 1) 14 ANODE F (DIGIT 1) 15 ANODE A (DIGIT 1) 16 ANODE G (DIGIT 1) E 7 F 11 G 9 Absolute Maximum Ratings at TA = 25C Description Power Dissipation Segment Forward Current Segment Peak Forward Current per Segment (1/10 Duty Factor at 10 KHz) Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wave Soldering Temperature for 3 seconds (at 2 mm Distance from the Body) HER HDSP-G0xE 65 25[1] 100 Green HDSP-G0xG 65 25[2] 100 AlGaAs Red HDSP-G0xA 30 15[3] 80 Yellow HDSP-G0xY 52 20[4] 80 Units mW mA mA -35 to +85 -35 to +85 5 250 -35 to +85 -35 to +85 5 250 -35 to +85 -35 to +85 5 250 -35 to +85 -35 to +85 5 250 C C V C Notes: 1. Derate above 25C at 0.33 mA/C. 2. Derate above 25C at 0.33 mA/C. 3. Derate above 25C at 0.2 mA/C. 4. Derate above 25C at 0.27 mA/C. Electrical/Optical Characteristics at TA = 25C High Efficiency Red (HER) Device HDSPG01E G03E Parameter Luminous Intensity/Segment Symbol IV Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage VF PEAK d VR Parameter Luminous Intensity/Segment Forward Voltage Symbol IV VF Min. 1.25 Typ. 1.19 2.60 2.05 635 620 Max. 2.40 5 Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA Units mcd V V nm nm V Test Conditions IF = 10 mA IF = 10 mA IF = 20 mA IR = 100 A Green Device HDSPG01G G03G Min. 1.25 1.80 Peak Wavelength Dominant Wavelength Reverse Voltage 5 PEAK d VR 5 Typ. 3.20 2.05 2.25 568 573 Max. 2.60 IR = 100 A AlGaAs Red Device HDSPG01A G03A Parameter Luminous Intensity/Segment Symbol IV Min. 3.20 Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage VF PEAK d VR Parameter Luminous Intensity/Segment Symbol IV Forward Voltage Peak Wavelength Dominant Wavelength Reverse Voltage VF PEAK d VR Typ. 3.66 6.50 1.85 660 643 Max. 2.00 5 Units mcd mcd V nm nm V Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA Test Conditions IF = 5 mA IF = 10 mA IF = 20 mA IR = 100 A Yellow Device HDSPG01Y G03Y Min. 0.80 Typ. 0.77 1.50 Max. Units mcd mcd 2.15 595 590 2.60 V nm nm V 5 Intensity Bin Limits (mcd at 10 mA) Bin Name G H I J K L HER/Green Min.[1] Max.[1] NA NA 1.251 2.000 2.001 3.200 3.201 5.050 NA NA NA NA Yellow Min.[1] 0.801 1.251 2.001 NA NA NA Max.[1] 1.250 2.000 3.200 NA NA NA AlGaAs Red Min.[1] Max.[1] NA NA NA NA NA NA 3.201 5.050 5.051 8.000 8.001 12.650 Note: 1. Tolerance for each bin limit is 10%. Color Bin Limits (nm at 10 mA) Color Green Yellow Bin 3 4 5 1 2 3 Dominant Wavelength (nm) Min.[1] Max.[1] 569.1 571.0 571.1 573.0 573.1 575.0 585.5 588.5 588.5 591.5 591.5 594.5 Note: 1. Tolerance for each bin limit is 1 nm. 6 IR = 100 A IF - FORWARD CURRENT PER SEGMENT - mA MAXIMUM DC CURRENT PER SEGMENT - mA High Efficiency Red (HER) 30 HIGH EFFICIENCY RED (HER) 25 20 15 10 5 0 0 20 40 60 80 100 120 100 80 60 40 20 0 0 0.5 Figure 1. Maximum allowable average or DC current vs. ambient temperature. 2.5 3.0 3.5 1.4 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 2.0 Figure 2. Forward current vs. forward voltage. 2.5 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 Figure 3. Relative luminous intensity vs. DC forward current. 1.2 1.0 0.8 0.6 0.4 0.2 0 35 IF - FORWARD CURRENT FOR SEGMENT - mA 7 1.5 VF - FORWARD VOLTAGE - V TA - AMBIENT TEMPERATURE - C 0 1.0 0 5 10 15 20 25 30 35 40 45 50 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current. IF - FORWARD CURRENT PER SEGMENT - mA MAXIMUM DC CURRENT PER SEGMENT - mA Green 30 GAP GREEN 25 20 15 10 5 0 0 20 40 60 80 100 120 100 80 60 40 20 0 0 0.5 TA - AMBIENT TEMPERATURE - C 2.0 2.5 3.0 3.5 Figure 6. Forward current vs. forward voltage. 1.2 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) 3.5 RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) 1.5 VF - FORWARD VOLTAGE - V Figure 5. Maximum allowable average or DC current vs. ambient temperature. 3.0 2.5 2.0 1.5 1.0 0.5 1.0 0.8 0.6 0.4 0.2 0 0 0 5 10 15 20 25 30 35 IF - FORWARD CURRENT FOR SEGMENT - mA Figure 7. Relative luminous intensity vs. DC forward current. 8 1.0 0 5 10 15 20 25 30 35 40 45 50 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current. 16 AIGaAs RED 14 12 10 8 6 4 2 0 0 20 40 60 80 100 IF - FORWARD CURRENT PER SEGMENT - mA MAXIMUM DC CURRENT PER SEGMENT - mA AlGaAs Red 120 100 80 60 40 20 0 0 0.5 TA - AMBIENT TEMPERATURE - C 2.5 1.2 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA) 2.0 Figure 10. Forward current vs. forward voltage. 3.0 2.5 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 35 IF - FORWARD CURRENT FOR SEGMENT - mA Figure 11. Relative luminous intensity vs. DC forward current. 9 1.5 VF - FORWARD VOLTAGE - V Figure 9. Maximum allowable average or DC current vs. ambient temperature. 0 1.0 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current. 25 YELLOW 20 15 10 5 0 0 20 40 60 80 100 IF - FORWARD CURRENT PER SEGMENT - mA MAXIMUM DC CURRENT PER SEGMENT - mA Yellow 120 100 80 60 40 20 0 0 0.5 Figure 13. Maximum allowable average or DC current vs. ambient temperature. 2.0 2.5 3.0 3.5 Figure 14. Forward current vs. forward voltage. 3.5 1.4 RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 10 mA) RELATIVE LUMINOUS INTENSITY (NORMALIZEDTO 1 AT 10 mA) 1.5 VF - FORWARD VOLTAGE - V TA - AMBIENT TEMPERATURE - C 3.0 2.5 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 IF - FORWARD CURRENT FOR SEGMENT - mA Figure 15. Relative luminous intensity vs. DC forward current. 10 1.0 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current. For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright (c) 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5988-2972EN 5989-3314EN May 18, 2006