FMZ CONNECTOR 1.0mm pitch/Connectors for FFC Specifications ------------------- The FMZ series, a Zero Insertion Force (ZIF) connector series, was developed to increase wear resistance and extend the connector's mating life. It is a very compact connector with a thickness of only 4.2 mm and a pitch of only 1.0 mm and is thus useful for high density packaging. The contact has a reliable double-leaf construction which provides stable connection. * Zero insertion force mechanism * Temporary retention feature * Compact * Double-leaf contact * Current rating: 0.5 A AC, DC * Voltage rating: 50 V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 20 m max. After environmental tests/ 30 m max. * Insulation resistance: 800 M min. * Withstanding voltage: 500 VAC/minute * Applicable FFC: Conductor pitch/ 1.0 mm Conductor width/ 0.7 mm Mating part thickness/ 6, 8 to 10, 12 to 16, 20 circuits: 0.3 0.05 mm 0 mm 22, 26, 28, 30 circuits: 0.3+0.05 * Applicable PC board thickness: 0.8 to 1.6 mm Note: FFC to be actually used should be checked for applicability. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 PC board layout and Assembly layout Top entry type Side entry type Circuit No.1 4.2 3.05 1 0.05 0.05 0.75 0.05 0.05 2 0.05 1 0.75 0.05 6.5 2.7 0.05 2 2.7 2 0.05 4.2 2 6.2 min 3.05 6.5 1.2 min Circuit No.1 Note: 1. The above figure is the figure viewed from the connector soldering side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 FMZ CONNECTOR Connector Top entry type Circuits 6 B 8 3.95 9 10 1 Circuit No.1 3.05 A 14 15 16 17 20 22 1 2 2.35 13 8 2.7 6.5 (When locked) 12 24 4.2 26 28 30 Model No. Top entry type Side entry type 06FMZ-BT 06FMZ-ST 08FMZ-BT 08FMZ-ST 09FMZ-BT - 10FMZ-BT 10FMZ-ST 12FMZ-BT 12FMZ-ST 13FMZ-BT 13FMZ-ST 14FMZ-BT 14FMZ-ST 15FMZ-BT 15FMZ-ST 16FMZ-BT 16FMZ-ST 17FMZ-BT 17FMZ-ST 20FMZ-BT 20FMZ-ST 22FMZ-BT 22FMZ-ST - 24FMZ-ST 26FMZ-BT 26FMZ-ST 28FMZ-BT 28FMZ-ST 30FMZ-BT 30FMZ-ST Dimensions (mm) A B Q'ty/box Top entry type Side entry type 5.0 12.0 1,440 800 7.0 14.0 1,440 800 8.0 15.0 960 - 9.0 16.0 960 600 11.0 18.0 960 600 12.0 19.0 960 600 13.0 20.0 960 400 14.0 21.0 780 400 15.0 22.0 780 400 16.0 23.0 780 400 19.0 26.0 720 400 21.0 28.0 720 400 23.0 30.0 - 300 25.0 32.0 480 300 27.0 34.0 480 300 29.0 36.0 480 300 Side entry type Material and Finish Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Housing: Glass-filled PBT, UL94V-0 B 3.5 8 A RoHS compliance This product displays (LF)(SN) on a label. 6.5When locked 1 2.7 4.2 3.95 JST 6.2 When locked Circuit No.1 2 Lead section dimensions of FFC 0.12 1 xN 1 0.1 0.15 1 xN- 1 1 0.1 0.7 0.15 622 circuits:0.3 0.05 2230 circuits:0.30.35 0.1 7.5 5 min 1 1 Conductor Film cover layer Reinforcing layer Base layer Note: N --- Number of circuits 2