Full Bridge Patterns Vishay Micro-Measurements Transducer-Class(R) Strain Gages size shown. GAGE PATTERN Actual Enlarged when necessary for definition. inch millimeter DIMENSIONS GAGE DESIGNATION RES. IN OHMS STANDARD CREEP CODE Low-cost full-bridge gage for bending- beam transducers. BAL is balanced to 0.4mV/V, but RG is 350 ohms 15%. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.050 0.260 0.050 0.220 1.28 6.66 1.28 5.64 MATRIX SIZE 0.32 L x 0.25 W 8.2 L x 6.4 W J2A-XX-S1425-35B BAL 0.4 N/A Compact full-bridge pattern for use on small, double-bending beams. Axial grid centerline spacing 0.250 in (6.35 mm). GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.465 0.060 0.189 3.18 11.81 1.52 4.80 MATRIX SIZE 0.54 L x 0.26 W 13.7 L x 6.6 W N2A-XX-S055R-350 350 0.2% R Similar to S055R pattern except axial grid centerline spacing 0.330 in (8.38mm). GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.125 0.545 0.060 0.189 3.18 13.84 1.52 4.80 MATRIX SIZE www.vishaymg.com 26 0.62 L x 0.26 W 15.8 L x 6.6 W N2A-XX-S014N-350 micro-measurements@vishay.com 350 0.2% N Document No: 11560 Revision 17-Nov-03 Full Bridge Patterns Vishay Micro-Measurements Transducer-Class(R) Strain Gages size shown. GAGE PATTERN Actual Enlarged when necessary for definition. inch millimeter DIMENSIONS GAGE DESIGNATION RES. IN OHMS STANDARD CREEP CODE Full-bridge pattern for single-surface gaging of transducers. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.100 0.345 0.120 0.295 2.54 8.76 3.05 7.49 MATRIX SIZE 0.41 L x 0.36 W 10.4 L x 9.1 W N2A-XX-S056R-350 N2A-XX-S120P-10C 350 0.2% 1000 0.2% R* P* Low-cost full-bridge gage for bending- beam transducers. BAL is balanced to 0.4mV/V, but RG is 1200 ohms 15%. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.070 0.258 0.070 0.195 1.78 6.55 1.78 4.95 0.31 L x 0.25 W MATRIX SIZE 7.9 L x 6.4 W N2A-XX-S1449-1KB BAL 0.4 N/A Low-cost, full-bridge pattern for bending-beam transducers. BAL is balanced to 0.4mV/V, but RG is 350 ohms 15%. GAGE LENGTH OVERALL LENGTH GRID WIDTH OVERALL WIDTH 0.070 0.238 0.070 0.190 1.78 6.04 1.78 4.83 MATRIX SIZE 0.27 L x 0.23 W 7.0 L x 5.8 W *Only creep code available for this gage type. Document No: 11560 Revision 17-Nov-03 N2A-XX-S1612-35B micro-measurements@vishay.com BAL 0.4 N/A www.vishaymg.com 27