LG T67K, LP T67K
Hyper TOPLED
Hyper-Bright Low Current LED
Lead (Pb) Free Product - RoHS Compliant
Released
2012-03-16 1
Besondere Merkmale
Gehäusetyp: weißes P-LCC-2-Gehäuse,
farbloser klarer Verguss
Besonderheit des Bauteils: extrem breite
Abstrahlcharakteristik; ideal für
Hinterleuchtungen und Einkopplungen in
Lichtleiter
Wellenlänge: 570 nm (grün),
560 nm (pure green)
Abstrahlwinkel: Lambertscher Strahler (120°)
Technologie: InGaAlP
optischer Wirkungsgrad: 4 lm/W (grün),
1,2 lm/W (pure green)
Gruppierungsparameter: Lichtstärke,
Wellenlänge
Verarbeitungsmethode: für alle
SMT-Bestücktechniken geeignet
Lötmethode: Reflow Löten
Vorbehandlung: nach JEDEC Level 2
Gurtung: 8-mm Gurt mit 2000/Rolle, ø180 mm
oder 8000/Rolle, ø330 mm
ESD-Festigkeit: ESD-sicher bis 2 kV nach
JESD22-A114-D
Erweiterte Korrosionsfestigkeit:
Details siehe Seite 9
Anwendungen
Informationsanzeigen im Innen- und
Außenbereich
optischer Indikator
Hinterleuchtung (LCD, Handy, Schalter,
Tasten, Displays, Werbebeleuchtung,
Allgemeinbeleuchtung)
Innenbeleuchtung im Automobilbereich
(z. B. Instrumentenbeleuchtung)
Markierungsbeleuchtung (z.B. Stufen,
Fluchtwege, u.ä.)
Einkopplung in Lichtleiter
Laufschriftanzeigen
Signal- und Symbolleuchten
Features
package: white P-LCC-2 package, colorless
clear resin
feature of the device: extremely wide viewing
angle; ideal for backlighting and coupling in
light guides
wavelength: 570 nm (green),
560 nm (pure green)
viewing angle: Lambertian Emitter (120°)
technology: InGaAlP
optical efficiency: 4 lm/W (green),
1.2 lm/W (pure green)
grouping parameter: luminous intensity,
wavelength
assembly methods: suitable for all
SMT assembly methods
soldering methods: reflow soldering
preconditioning: acc. to JEDEC Level 2
taping: 8 mm tape with 2000/reel, ø180 mm
or 8000/reel, ø330 mm
ESD-withstand voltage: up to 2 kV acc. to
JESD22-A114-D
Superior Corrosion Robustness:
details see page 9
Applications
indoor and outdoor displays
optical indicators
backlighting (LCD, cellular phones, switches,
keys, displays, illuminated advertising, general
lighting)
interior automotive lighting
(e.g. dashboard backlighting)
marker lights (e.g. steps, exit ways, etc.)
coupling into light guides
light writing displays
signal and symbol luminaire
2012-03-16 2
LG T67K, LP T67K
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen
(siehe Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LG T67K-G2J1-24
bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen G2, H1, H2 oder J1 enthalten ist.
Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine
Wellenlängengruppe geliefert. Z.B.: LG T67K-G2J1-24 bedeutet, dass auf dem Gurt nur eine der Wellenlängengruppen -2, -3,
oder -4 enthalten ist (siehe Seite 5 für nähere Information).
Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden.
Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation).
Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LG T67K-G2J1-24 means
that only one group G2, H1, H2 or J1 will be shippable for any one reel.
In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on
any one reel. E.g. LG T67K-G2J1-24 means that only 1 wavelength group -2, -3, or -4 will be shippable (see page 5 for
explanation).
In order to ensure availability, single wavelength groups will not be orderable.
Bestellinformation
Ordering Information
Typ
Type
Emissionsfarbe
Color of
Emission
Lichtstärke
1)
Seite 15
Luminous
Intensity
1) page 15
I
F
= 2 mA
I
V
(mcd)
Lichtstrom
2)
Seite 15
Luminous
Flux
2)
page 15
I
F
= 2 mA
Φ
V
(mlm)
Bestellnummer
Ordering Code
LG T67K-G2J1-24
LG T67K-H2K1-24
LG T67K-G2K1-24
green 2.24 ... 5.60
3.55 ... 9.00
2.24 ... 9.00
12 (typ.)
19 (typ.)
16 (typ.)
Q65110A2182
Q65110A2183
Q65110A2184
LP T67K-E1F2-25
LP T67K-F1G2-25
LP T67K-E1G2-25
pure green 0.71 ... 1.80
1.12 ... 2.80
0.71 ... 2.80
4 (typ.)
6 (typ.)
5 (typ.)
Q65110A2185
Q65110A2186
Q65110A2187
Vergleichstabelle für 10 mA
Correllation Table for 10 mA
Typ
Type
Emissions-
farbe
Color of
Emission
Lichtstärke
1)
Seite 15
Luminous
Intensity
1) page 15
I
F
= 2 mA
I
V
(mcd)
Lichtstärke
2)
Seite 15
Luminous
Intensity
2) page 15
I
F
= 10 mA
I
V
(mcd)
Lichtstrom
2)
Seite 15
Luminous
Flux
2) page 15
I
F
= 10 mA
Φ
V
(mlm)
LG T67K-G2J1-24
LG T67K-H2K1-24
LG T67K-G2K1-24
green 2.24 ... 5.60
3.55 ... 9.00
2.24 ... 9.00
20 (typ.)
31 (typ.)
28 (typ.)
60 (typ.)
93 (typ.)
84 (typ.)
LP T67K-E1F2-25
LP T67K-F1G2-25
LP T67K-E1G2-25
pure green 0.71 ... 1.80
1.12 ... 2.80
0.71 ... 2.80
6 (typ.)
10 (typ.)
9 (typ.)
18 (typ.)
30 (typ.)
27 (typ.)
Siehe auch Grafik Seite 7 / see also graph on page 7
LG T67K, LP T67K
2012-03-16 3
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
LG LP
Betriebstemperatur
Operating temperature range
T
op
– 40 … + 100 °C
Lagertemperatur
Storage temperature range
T
stg
– 40 … + 100 °C
Sperrschichttemperatur
Junction temperature
T
j
+ 125 °C
Durchlassstrom
Forward current
(
T
S
=25°C)
I
F
20 mA
Stoßstrom
Surge current
t
10
µ
s,
D
= 0.005,
T
S
=25°C
I
FM
100 mA
Sperrspannung
3)
Seite 15
Reverse voltage
3)
page 15
(
T
S
=25°C)
V
R
12 V
2012-03-16 4
LG T67K, LP T67K
Kennwerte
Characteristics
(
T
S
= 25 °C)
Bezeichnung
Parameter
Symbol
Symbol
Werte
Value
Einheit
Unit
LG LP
Wellenlänge des emittierten Lichtes (typ.)
Wavelength at peak emission
I
F
= 2 mA
λ
peak
572 562 nm
Dominantwellenlänge
5) Seite 15
Dominant wavelength
5) page 15
I
F
= 2 mA
λ
dom
570*
–4/+5
560*
± 6
nm
Spektrale Bandbreite bei 50 % I
rel max
(typ.)
Spectral bandwidth at 50 % I
rel max
I
F
= 2 mA
∆λ 22 22 nm
Abstrahlwinkel bei 50 % I
V
(Vollwinkel) (typ.)
Viewing angle at 50 % I
V
2ϕ120 120 Grad
deg.
Durchlassspannung
6)
Seite 15
(min.)
Forward voltage
6) page 15
(typ.)
I
F
= 2 mA (max.)
V
F
V
F
V
F
1.7
1.8
2.2
1.7
1.8
2.2
V
V
V
Sperrstrom (typ.)
Reverse current (max.)
V
R
= 12 V
I
R
I
R
0.01
10
0.01
10
µA
µA
Temperaturkoeffizient von λ
peak
(typ.)
Temperature coefficient of λ
peak
I
F
= 2 mA; –10°C T 100°C
TC
λpeak
0.11 0.10 nm/K
Temperaturkoeffizient von λ
dom
(typ.)
Temperature coefficient of λ
dom
I
F
= 2 mA; –10°C T 100°C
TC
λdom
0.10 0.10 nm/K
Temperaturkoeffizient vonV
F
(typ.)
Temperature coefficient of V
F
I
F
= 2 mA; –10°C T 100°C
TC
V
– 2.3 – 2.5 mV/K
Optischer Wirkungsgrad (typ.)
Optical efficiency
I
F
= 2 mA
η
opt
4 1.2 lm/W
Wärmewiderstand
Thermal resistance
Sperrschicht/Umgebung
4)
Seite 15
(max.)
Junction/ambient4) page 15
Sperrschicht/Lötpad (max.)
Junction/soldering point
R
th JA
R
th JS
420**
260**
K/W
K/W
* Einzelgruppen siehe Seite 5
Individual groups on page 5
**Rth(max) basiert auf statistischen Werten
Rth(max) is based on statistic values
LG T67K, LP T67K
2012-03-16 5
Wellenlängengruppen (Dominantwellenlänge)
5)
Seite 15
Wavelength Groups (Dominant Wavelength)
5) page 15
Gruppe
Group
pure green green Einheit
Unit
min. max. min. max.
2 554 557 566 569 nm
3 557 560 569 572 nm
4 560 563 572 575 nm
5 563 566 nm
Helligkeits-Gruppierungsschema
Brightness Groups
Helligkeitsgruppe
Brightness Group
Lichtstärke
1)
Seite 15
Luminous Intensity
1) page 15
I
V
(mcd)
Lichtstrom
2)
Seite 15
Luminous Flux
2) page 15
Φ
V
(mlm)
E1
E2
F1
F2
G1
G2
H1
H2
J1
J2
K1
0.71 ... 0.90
0.90 ... 1.12
1.12 ... 1.40
1.40 ... 1.80
1.80 ... 2.24
2.24 ... 2.80
2.80 ... 3.55
3.55 ... 4.50
4.50 ... 5.60
5.60 ... 7.10
7.10 ... 9.00
2.5 (typ.)
3.0 (typ.)
3.8 (typ.)
4.8 (typ.)
6.0 (typ.)
7.6 (typ.)
9.5 (typ.)
12.0 (typ.)
15.0 (typ.)
19.0 (typ.)
24.0 (typ.)
Anm.: Die Standardlieferform von Serientypen beinhaltet eine untere bzw. obere Familiengruppe. Diese besteht aus
3 bzw. 4 Helligkeitsgruppen.
Einzelne Helligkeitsgruppen sind nicht bestellbar.
Note: The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual
brightness groups.
Individual brightness groups cannot be ordered.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: G2-3
Example: G2-3
Helligkeitsgruppe
Brightness Group
Wellenlänge
Wavelength
G2 3
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
Note: No packing unit / tape ever contains more than one group for each selection.
2012-03-16 6
LG T67K, LP T67K
Relative spektrale Emission
2)
Seite 15
Relative Spectral Emission
2) page 15
V(
λ
) = spektrale Augenempfindlichkeit / Standard eye response curve
I
rel
=
f
(
λ
);
T
S
= 25 °C;
I
F
= 2 mA
Abstrahlcharakteristik
2)
Seite 15
Radiation Characteristic
2 page 15)
I
rel
=
f
(
ϕ
);
T
S
= 25 °C
40
0
400
20
60
80
rel
I
100
%
nm
λ
OHL00570
V
λ
450 500 550 600 650 700
greenpure-green
0
0.2
0.4
1.0
0.8
0.6
ϕ
1.0 0.8 0.6 0.4
10˚20˚40˚ 30˚ OHL01660
50˚
60˚
70˚
80˚
90˚
100˚
20˚ 40˚ 60˚ 80˚ 100˚ 120˚
LG T67K, LP T67K
2012-03-16 7
Durchlassstrom
2)
Seite 15
Forward Current
2) page 15
I
F
=
f
(
V
F
);
T
S
= 25 °C
Relative Lichtstärke
2) 7)
Seite 15
Relative Luminous Intensity
2) 7) page 15
I
V
/
I
V(2 mA)
=
f
(
I
F
);
T
S
= 25 °C
Relative Lichtstärke
2)
Seite 15
Relative Luminous Intensity
2) page 15
I
V
/
I
V
(25 °C)=
f
(
T
j
);
I
F
= 2 mA
V
OHL00802
1.4
10-3
10-2
10-1
100
101
mA
102
I
F
V
F
1.6 1.8 2.0 2.2
10100mA
110
I
F
2
OHL00801
V
V (2 mA)
I
102
I
10-1
100
101
OHL00800
0
-60
T
I
V (25˚C)
I
V
-40 -20 0 20 40 60 ˚C 100
0.5
1.0
1.5
2.0
3.0
j
LG T67K, LP T67K
2012-03-16 8
Maximal zulässiger Durchlassstrom
Max. Permissible Forward Current
I
F
=
f
(
T
A
)
Zulässige Impulsbelastbarkeit
I
F
=
f
(
t
p
)
Permissible Pulse Handling Capability
Duty cycle
D
= parameter,
T
A
= 25 °C
Zulässige Impulsbelastbarkeit
I
F
=
f
(
t
p
)
Permissible Pulse Handling Capability
Duty cycle
D
= parameter,
T
A
= 85 °C
OHL01429
0
I
F
T
0
mA
20 40 60 80 ˚C 100
5
10
15
20
25
T
A
T
S
A
T
temp. ambient
S
T
temp. solder point
LG T67K, LP T67K
2012-03-16 9
Maßzeichnung
8) Seite 15
Package Outlines
8) page 15
Korrosionsfestigkeit besser als EN 60068-2-60 (method 4):
mit erweitertem Korrosionstest: 40°C / 90%rh / 15ppm H
2
S / 336h
Corrosion robustness better than EN 60068-2-60 (method 4):
with enhanced corrosion test: 40°C / 90%rh / 15ppm H
2
S / 336h
Kathodenkennung: abgeschrägte Ecke
Cathode mark: bevelled edge
Gewicht / Approx. weight: 35 mg
Gurtung / Polarität und Lage
8) Seite 15
Verpackungseinheit 2000/Rolle, ø180 mm oder
8000/Rolle, ø330 mm
Method of Taping / Polarity and Orientation
8) page 15
Packing unit 2000/reel, ø180 mm or 8000/reel,
ø330 mm
GPLY6724
0.7 (0.028)
0.9 (0.035)
1.7 (0.067)
2.1 (0.083)
0.12 (0.005)
0.18 (0.007)
0.5 (0.020)
1.1 (0.043)
3.3 (0.130)
3.7 (0.146)
0.4 (0.016)
0.6 (0.024)
2.6 (0.102)
3.0 (0.118)
2.1 (0.083)
2.3 (0.091)
Cathode marking
3.0 (0.118)
3.4 (0.134)
(2.4) (0.095)
0.1 (0.004) (typ.)
4˚±1
A
C
OHAY2271
3.6 (0.142)
8 (0.315)
3.5 (0.138)
1.75 (0.069)
4 (0.157)1.5 (0.059)
2.9 (0.114)
4 (0.157)
2 (0.079) Cathode/Collector Marking
2012-03-16 10
LG T67K, LP T67K
Empfohlenes Lötpaddesign
8) 9)
Seite 15
Reflow Löten
Recommended Solder Pad
8) 9) page 15
Reflow Soldering
Empfohlenes Lötpaddesign
verwendbar für TOPLED und Power TOPLED
Reflow Löten
8)
Seite 15
Recommended Solder Pad
useable for TOPLED and Power TOPLED
Reflow Soldering
8) page 15
OHLPY970
4.5 (0.177)
2.6 (0.102)
1.5 (0.059)
Cu-area > 16 mm
Cu-Fläche > 16 mm
2
2
Solder resist
Lötstopplack
4.5 (0.177)
1.5 (0.059)
2.6 (0.102)
Padgeometrie für
improved heat dissipation
verbesserte Wärmeableitung
Paddesign for
OHLPY440
Padgeometrie für
verbesserte Wärmeableitung
improved heat dissipation
Paddesign for
Lötstoplack
Solder resist
0.8 (0.031)
3.7 (0.146)
1.1 (0.043)
2.3 (0.091)
3.3 (0.130)
1.5 (0.059)
11.1 (0.437)
Cu Fläche / 16 mm per pad
2
Cu-area
_
<
3.3 (0.130)
Kathode/
Cathode
Anode
Fläche darf elektrisch nicht beschaltet werden.
Do not use this area for electrical contact.
0.7 (0.028)
Fläche darf elektrisch nicht beschaltet werden.
Do not use this area for electrical contact.
LG T67K, LP T67K
2012-03-16 11
Lötbedingungen Vorbehandlung nach JEDEC Level 2
Soldering Conditions Preconditioning acc. to JEDEC Level 2
Reflow Lötprofil für bleifreies Löten (nach J-STD-020D.01)
Reflow Soldering Profile for lead free soldering (acc. to J-STD-020D.01)
Profile Feature
Pb-Free (SnAgCu) Assembly
Recommendation Max. Ratings
Ramp-up Rate to Preheat*
)
25°C to 150°C
2°C / sec 3°C / sec
Time t
s
from T
Smin
to T
Smax
(150°C to 200°C
100s min. 60sec max. 120sec
Ramp-up Rate to Peak*
)
180°C to T
P
2°C / sec 3°C / sec
Liquidus Temperture T
L
217°C
Time t
L
above T
L
80sec max. 100sec
Peak Temperature T
P
245°C max. 260°C
Time t
P
within 5°C of the specified
peak temperature T
P
- 5K
20sec min. 10sec max. 30sec
Ramp-down Rate*
T
P
to 100°C
3°K / sec 6°K / sec maximum
Time 25°C to Peak temperature max. 8 min.
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation T/t: t max. 5 sec; fulfillment for the whole T-range
0
0s
OHA04525
50
100
150
200
250
300
50 100 150 200 250 300
t
T
˚C
S
t
t
P
t
T
p
240 ˚C
217 ˚C
245 ˚C
25 ˚C
L
2012-03-16 12
LG T67K, LP T67K
Barcode-Produkt-Etikett (BPL)
Barcode-Product-Label (BPL)
Gurtverpackung
Tape and Reel
Tape dimensions in mm (inch)
W P
0
P
1
P
2
D
0
E F
4 ± 0.1
(0.157 ± 0.004)
4 ± 0.1
(0.157 ± 0.004)
2 ± 0.05
(0.079 ± 0.002)
1.5 + 0.1
(0.059 + 0.004)
1.75 ± 0.1
(0.069 ± 0.004)
3.5 ± 0.05
(0.138 ± 0.002)
Reel dimensions in mm (inch)
A W N
min
W
1
W
2 max
180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567)
330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567)
OHA04563
(G) GROUP:
1234567890(1T) LOT NO: (9D) D/C: 1234
(X) PROD NO: 123456789
(6P) BATCH NO: 1234567890
LX XXXX
RoHS Compliant
BIN1: XX-XX-X-XXX-X
ML
2
Temp ST
260 °C R
Pack: R18
DEMY 022
B_R999_1880.1642 R
9999(Q)QTY:
Semiconductors
OSRAM Opto
XX-XX-X-X
D0
2
P
P
0
1
P
W
F E
Direction of unreeling
N
W1
2
W
A
OHAY0324
Label
Gurtvorlauf:
Leader:
Trailer:
Gurtende:
13.0
Direction of unreeling
±0.25
160 mm
160 mm
400 mm
400 mm
8+ 0.3
– 0.1
LG T67K, LP T67K
2012-03-16 13
Trockenverpackung und Materialien
Dry Packing Process and Materials
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und
einer Feuchteindikatorkarte
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im
Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter
anderem ein Auszug der JEDEC-Norm, enthalten.
Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter
“Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Kartonverpackung und Materialien
Transportation Packing and Materials
Dimensions of transportation box in mm (inch)
Breite / Width Länge / length Höhe / height
200
±
5 (7,874
±
0,1968
±
) 200
±
5 (7,874
±
0,1968) 30
±
5 (1,1811
±
0,1968)
352
±
5 (13,858
±
0,1968
±
) 352
±
5 (13,858
±
0,1968) 33
±
5 (1,3
±
0,1968)
OHA00539
OSRAM
Moisture-sensitive label or print
Barcode label
Desiccant
Humidity indicator
Barcode label
OSRAM
Please check the HIC immidiately after
bag opening.
Discard if circles overrun.
Avoid metal contact.
WET
Do not eat.
Comparator
check dot
parts still adequately dry.
examine units, if necessary
examine units, if necessary
5%
15%
10% bake units
bake units
If wet,
change desiccant
If wet,
Humidity Indicator
MIL-I-8835
If wet,
Moisture Level 3 Floor time 168 HoursMoisture Level 6Floor time 6 Hours
a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or
reflow, vapor-phase reflow, or equivalent processing (peak package
2. After this bag is opened, devices that will be subjected to infrared
1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a
at factory conditions of
(if blank, seal date is identical with date code).
a) Mounted within
b) Stored at
body temp.
3. Devices require baking, before mounting, if:
Bag seal date
Moisture Level 1
Moisture Level 2
Moisture Level 2a
4. If baking is required,
b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below
If blank, see bar code label
Floor time > 1 Year
Floor time 1 Year
Floor time 4 Weeks
10% RH.
_
<
Moisture Level 4
Moisture Level 5
˚C).
OPTO SEMICONDUCTORS
MOISTURE SENSITIVE
This bag contains
CAUTION
Floor time 72 Hours
Floor time 48 Hours
Floor time 24 Hours
30 ˚C/60% RH.
_
<
LEVEL
If blank, see
bar code label
OHA02044
PACKVAR:
R077
Additional TEXT
P-1+Q-1
Multi TOPLED
Muster
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
1
0
(9D) D/C:
1
1
(1T) LOT NO:
210021998
123GH1234
02
4 5
(Q)QTY:2000
0144
(G) GROUP:
260 C RT
240 C R
3
220 C R
ML
Bin3:
Bin2: Q-1-20
Bin1: P-1-20
LSY T676
2
2a
Temp ST
R18
DEMY
PACKVAR:
R077
Additional TEXT
P-1+Q-1
Multi TOPLED
Muster
OSRAM Opto
Semiconductors
(6P) BATCH NO:
(X) PROD NO:
1
0
(9D) D/C:
11
(1T) LOT NO:
210021998
123GH1234
024 5
(Q)QTY:2000
0144
(G) GROUP:
260 C RT
240 C R
3
220 C R
ML
Bin3:
Bin2: Q-1-20
Bin1: P-1-20
LSY T676
2
2a
Temp ST
R18
DEMY
OSRAM
Packing
Sealing label
Barcode label
Moisture Level 3 Floor time 168 Hours Moisture Level 6Floor time 6 Hours
a) Humidity Indicator Card is > 10% when read at 23 ˚C ± 5 ˚C, or
reflow, vapor-phase reflow, or equivalent processing (peak package
2. After this bag is opened, devices that will be subjected to infrared
1. Shelf life in sealed bag: 24 months at < 40 ˚C and < 90% relative humidity (RH).
Moisture Level 5a
at factory conditions of
(if blank, seal date is identical with date code).
a) Mounted within
b) Stored at
body temp.
3. Devices require baking, before mounting, if:
Bag seal date
Moisture Level 1
Moisture Level 2
Moisture Level 2a
4. If baking is required,
b) 2a or 2b is not met.
Date and time opened:
reference IPC/JEDEC J-STD-033 for bake procedure.
Floor time see below
If blank, see bar code label
Floor time > 1 Year
Floor time 1 Year
Floor time 4 Weeks
10% RH.
_
<
Moisture Level 4
Moisture Level 5
˚C).
OPTO SEMICONDUCTORS
MOISTURE SENSITIVE
This bag contains
CAUTION
Floor time 72 Hours
Floor time 48 Hours
Floor time 24 Hours
30 ˚C/60% RH.
_
<
LEVEL
If blank, see
bar code label
Barcode label
2012-03-16 14
LG T67K, LP T67K
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components
10) page 15
may only be used in life-support devices or systems
11) page 15
with the express written approval of
OSRAM OS.
Revision History: 2012-03-16
Previous Version: 2010-11-24
Page Subjects (major changes since last revision) Date of change
5 value: min. forward voltage 2004-12-02
1, 9 additional information 2009-12-18
13 package outlines updated 2009-12-18
12 OS-IN-2010-032 2010-10-04
all final datasheet created 2010-11-24
11 OS-IN-2012-005 2012-03-16
LG T67K, LP T67K
2012-03-16 15
Fußnoten:
1)
Helligkeitswerte werden während eines Strompulses einer
typischen Dauer von 25 ms, mit einer internen
Reproduzierbarkeit von +/- 8 % und einer erweiterten
Messunsicherheit von +/- 11 % gemessen (gemäß GUM mit
Erweiterungsfaktor k = 3).
2)
Wegen der besonderen Prozessbedingungen bei der
Herstellung von LED können typische oder abgeleitete
technische Parameter nur aufgrund statistischer Werte
wiedergegeben werden. Diese stimmen nicht
notwendigerweise mit den Werten jedes einzelnen Produktes
überein, dessen Werte sich von typischen und abgeleiteten
Werten oder typischen Kennlinien unterscheiden können. Falls
erforderlich, z.B. aufgrund technischer Verbesserungen,
werden diese typischen Werte ohne weitere Ankündigung
geändert.
3)
Die LED kann kurzzeitig in Sperrichtung betrieben werden.
4)
R
thJA
ergibt sich bei Montage auf PC-Board FR 4
(Padgröße 16 mm
2
je Pad)
5)
Die dominante Wellenlänge wird während eines Strompulses
einer typischen Dauer von 25 ms, mit einer internen
Reproduzierbarkeit von +/- 0,5 nm und einer erweiterten
Messunsicherheit von +/- 1 nm gemessen (gemäß GUM mit
Erweiterungsfaktor k = 3).
6)
Vorwärtsspannungen werden während eines Strompulses
einer typischen Dauer von 8 ms, mit einer internen
Reproduzierbarkeit von +/- 0,05 V und einer erweiterten
Messunsicherheit von +/- 0,1 V gemessen (gemäß GUM mit
Erweiterungsfaktor k=3).
7)
Im gestrichelten Bereich der Kennlinien muss mit erhöhten
Helligkeitsunterschieden zwischen Leuchtdioden innerhalb
einer Verpackungseinheit gerechnet werden.
Dimmverhältnis im Gleichstrom-Betrieb max. 5:1 für red
8)
Maße werden wie folgt angegeben: mm (inch)
9)
Gehäuse hält TTW-Löthitze aus nach CECC 00802
10)
Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden
Apparaten oder Systemen eingesetzt wird und dessen Defekt
voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden
Apparates oder Systems führen wird oder die Sicherheit oder
Effektivität dieses Apparates oder Systems beeinträchtigt.
11)
Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper
oder
(b) für die Lebenserhaltung bestimmt.
Falls sie versagen, kann davon ausgegangen werden, dass die
Gesundheit und das Leben des Patienten in Gefahr ist.
Published by
OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com
© All Rights Reserved.
Remarks:
1)
Brightness values are measured during a current pulse of
typical 25 ms, with an internal reproducibility of +/- 8 % and an
expanded uncertainty of +/- 11 % (acc. to GUM with a coverage
factor of k = 3).
2)
Due to the special conditions of the manufacturing processes of
LED, the typical data or calculated correlations of technical
parameters can only reflect statistical figures. These do not
necessarily correspond to the actual parameters of each single
product, which could differ from the typical data and calculated
correlations or the typical characteristic line. If requested, e.g.
because of technical improvements, these typ. data will be
changed without any further notice.
3)
Driving the LED in reverse direction is suitable for short term
application.
4)
R
thJA
results from mounting on PC board FR 4
(pad size 16 mm
2
per pad)
5)
The dominant wavelength is measured at a current pulse of
typical 25 ms, with an internal reproducibility of +/- 0,5 nm and
an expanded uncertainty of +/- 1 nm (acc. to GUM with a
coverage factor of k=3).
6)
The forward voltage is measured during a current pulse of
typical 8 ms, with an internal reproducibility of +/- 0,05 V and an
expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage
factor of k=3).
7)
In the range where the line of the graph is broken, you must
expect higher brightness differences between single LEDs
within one packing unit. Dimming range for direct current mode
max. 5:1 for red
8)
Dimensions are specified as follows: mm (inch)
9)
Package able to withstand TTW-soldering heat acc. to
CECC 00802
10)
A critical component is a component used in a life-support
device or system whose failure can reasonably be expected to
cause the failure of that life-support device or system, or to
affect its safety or the effectiveness of that device or system.
11)
Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) to support and/or maintain and sustain human life. If they
fail, it is reasonable to assume that the health and the life of the
user may be endangered.