Printers
Hardware/Software
134 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
T107M Series Printers . . . . . . . . . . . . . . .135
T200 Series Printers . . . . . . . . . . . . . . . . .137
T300 Series Printers . . . . . . . . . . . . . . . . .138
T400 Series Printers . . . . . . . . . . . . . . . . .139
T612M-DS Printer . . . . . . . . . . . . . . . . . . .140
AM6310 Printer . . . . . . . . . . . . . . . . . . . . .141
LMS-6000 Laser Marking System . . . .142
LMS-9000 Laser Marking System . . . .143
BSC-100 Barcode scanners . . . . . . . . . .144
BSC-200 Hand held imager . . . . . . . . . .145
VLD-100 Hand held imager . . . . . . . . . .146
VRF-100 Data Matrix Verifier . . . . . . . .147
Thermal Transfer . . . . . . . . . . . . . . . . . . . .148
Dot Matrix . . . . . . . . . . . . . . . . . . . . . . . . . .154
WinTotal . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
PrintEasy . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
HL2010E/HL1910E
hand held heater . . . . . . . . . . . . . . . . . . . .160
AMP-TY Nylon cable ties . . . . . . . . . . . . .161
AMP-TY Application Tool . . . . . . . . . . . .162
PRINTERS
RIBBONS
SOFTWARE
APPLICATION SYSTEMS
NOT the LATEST
REVISION
OBSOLETE
Printers
Hardware/Software
135
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
T107M Handheld Printer
Printers
The new T107M from Tyco Electronics is perfect for the
professional user who needs an affordable label printer for on-site
applications that's tough and easy to use. Contractors, panel
builders and facility managers will save time and money by using
the special Hot Keys that provide labels at the touch of a button
including wire and cable wraps,module marking, fixed length,
serialization, vertical printing, barcodes, symbols and much more.
The T107M offers clear, smudge-free high-performance labels that
stick permanently to a variety of surfaces and provides remarkable
MIL-spec print permanence on Heat Shrink Tubing. Print media is
offered in easy-to-load cassettes and includes an optimized ribbon
and choice of material: Heat-Shrink, Nylon Cloth, Vinyl, Polyester,
and Polypropylene labels.
Printer Specifications
Printing Method Thermal Transfer Printhead (180 dpi)
Dimensions 70 mm L x 114mm W x 212mm H
Printer Weight 519g
Keyboard ABC layout
To access international characters: Rapid
Accented Character Entry, according to the
mobile phone principle.
LCD Display 2 lines
Rechargeable battery pack life indicator
Display backlighting
Operating conditions Temperature: 4°C to 40°C (39°F to 104°F)
Humidity: 10% to 90% RH
Storage conditions Temperature : 0°C to 90°C (32°F to 194°F)
Humidity: 10% to 90% RH
Product Order Code Description
T107M-SMS-PRINTER-KIT-US Printer Kit - US power adaptor included
T107M-SMS-PRINTER-KIT-UK Printer Kit - UK power adaptor included
T107M-SMS-PRINTER-KIT-EU Printer Kit - European power adaptor included
T107M-SMS-PRINTER-KIT-AUZ Printer Kit - Australia power adaptor included
T107M-SMS-PRINTER-KITASI Printer Kit - Asia power adaptor included
T107M-SMS-PRINTER-US Printer Only (US)
T107M-SMS-PRINTER-EU Printer Only (European)
SMS-US-A/C-ADAPTOR US A/C power adaptor
SMS-EU-A/C-ADAPTOR European A/C power adaptor
SMS-ASIA-A/C-ADAPTER UK & Asia A/C power adaptor
SMS-AUZ-A/C-ADAPTOR Australian A/C power adaptor
SMS-BATTERY-PACK Rechargeable battery pack
SMS-CARRY STRAP Soft carry strap
SMS-PRINTER-HARDCASE Hard case
Printer Kit Contents
Printer
Rubber protection bumper
User guide
Six (6) AA batteries
Power adaptor
Hard carry case
One (1) 19mm white flexible nylon tape printer cassette
One (1) 9mm yellow heat-shrinkable tubing printer cassette
See page 136 for available printer cassettes and ordering information.
Printers
Hardware/Software
136 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
T107M Handheld Printer Cassettes
Printers
Ordering Infornation
T107M Cassettes
Cable Diameter Length Shrink Technical
Description Material mm
inches
m Radio Color Datasheet
SMS-TMS-3.9-4 Heat-shrink tubing 1.18 - 2.33
0.05 - 0.09
1.5 3:1 Yellow TTDS-122
SMS-TMS-3.9-9 Heat-shrink tubing 1.18 - 2.33
0.05 - 0.09
1.5 3:1 White TTDS-122
SMS-TMS-5.2-4 Heat-shrink tubing 1.73 - 3.73
0.07 - 0.15
1.5 3:1 Yellow TTDS-122
SMS-TMS-5.2-9 Heat-shrink tubing 1.73 - 3.73
0.05 - 0.15
1.5 3:1 White TTDS-122
SMS-TMS-7.9-4 Heat-shrink tubing 2.97 - 5.13
0.12 - 0.20
1.5 3:1 Yellow TTDS-122
SMS-TMS-7.9-9 Heat-shrink tubing 2.97 - 5.13
0.12 - 0.20
1.5 3:1 White TTDS-122
SMS-TMS-13.2-4 Heat-shrink tubing 4.64 - 8.70
0.18 - 0.34
1.5 3:1 Yellow TTDS-122
SMS-TMS-13.2-9 Heat-shrink tubing 4.64 - 8.70
0.18 - 0.34
1.5 3:1 White TTDS-122
Width Length Technical
Description Material mm
inches
m Color Datasheet
SMS-NC-12-4 Nylon Cloth 12
0.47
3.5 Yellow TTDS-123
SMS-NC-12-9 Nylon Cloth 12
0.47
3.5 White TTDS-123
SMS-NC-19-9 Nylon Cloth 19
0.75
3.5 White TTDS-123
SMS-PPNA--6-9 Non-adhesive tag 6
0.24
5.5 White TTDS-124
SMS-PPNA-9-9 Non-adhesive tag 9
0.35
5.5 White TTDS-124
SMS-V-12-4 Colored vinyl 12
0.47
5.5 Yellow TTDS-125
SMS-V-12-9 Colored vinyl 12
0.47
5.5 White TTDS-125
SMS-V-19.2 Colored vinyl 19
0.75
5.5 Red TTDS-125
SMS-V-19-4 Colored vinyl 19
0.75
5.5 Yellow TTDS-125
SMS-V-19-5 Colored vinyl 19
0.75
5.5 Green TTDS-125
SMS-V-19-9 Colored vinyl 19
0.75
5.5 White TTDS-125
SMS-WP-9-9 Polyester 9
0.35
5.5 White TTDS-126
SMS-WP-12-9 Polyester 12
0.47
5.5 White TTDS-126
SMS-MP-12-8A Polyester 12
0.47
5.5 Metalized TTDS-127
SMS-MP-19-8A Polyester 19
0.75
5.5 Metalized TTDS-127
SMS-CP-12-X Polyester 12
0.47
5.5 Clear
SMS-CP-19-X Polyester 19
0.75
5.5 Clear
137
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
T200 Series portable thermal transfer printers
Printers
Printers
Hardware/Software
The T200 series of printers are portable/desktop thermal transfer
printers with a 4.1" print head offering an economical option for
low volume customers who want to take advantage of thermal
transfer printing technology. Their small, light weight design
makes them ideal for applications requiring portability or in
environments with multiple workstations where space is limited.
The T208M has a 200 dpi printhead; the T212M has a 300 dpi
printhead for crisp, high quality text, barcodes and graphic images.
Both printers are designed for use with Tyco Electronics range of
TMS heat shrinkable wire marker sleeves and limited thermal
transfer printable pressure sensitive label products.
T200 series printers are available with optional label spindle
accessory. It externally holds a roll of labels on 3" core for easy
dispensing.
Printer Specifications
Tyco Electronics T208M-TTDS-011
T212M-TTDS-064
Print head width 104mm (4.09")
Print head resolution T208M: 8dpmm (203 dpi)
T212M: 12dpmm (305 dpi)
Print speed (maximum) 51mm/sec (2 inch/sec)
Media sensor Transmissive (fixed)
Reflective (fixed
Memory T208M: 256KB SRAM and 512KB Flash
T212M: 512KB SRAM and 1MB Flash
Communication interface Parallel (Centronics), serial (RS232),
and USB
Printer dimensions 200mm W x 247mm D x 171mm H
(7.9" W x 9.75" D x 6.75" H)
Printer weight 1.81 kg (4 lbs)
Shipping weight 4 kg (9 lbs)
Media Specifications
Maximum print width 104mm (4.09")
Maximum media width 118mm (4.65")
Minimum media width 28mm (1.12")
Maximum media roll diameter 127mm (5.0")
Media core diameter 25mm (1.0")
Ribbon wind Ink side out
Product Order Code Description
T208M-PRINTER T208M thermal printer - standard
T208M-C-PRINTER T208M thermal printer - cutter option
T212M-PRINTER T212M thermal printer - standard
T212M-C-PRINTER T212M thermal printer - cutter option
T200-LABEL-SPINDLE External label roll holder for T200 printers
Only the T212M printer is recommended when printing size 3/32 (2.4mm) marker
sleeves.
138 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
T300 Series High performance, cost effective thermal transfer printers
Printers
Printers
Hardware/Software
The T300 series printers are high performance, yet cost effective
thermal transfer printers with a 4.1" printhead. The rugged and
durable all metal construction makes them suitable for demanding
industrial and commercial environments. The enhanced memory
and 32 bit processor provide fast data processing and print
speeds. Optional accessories are available for added convenience
and efficiency.
The T308S and T308SN have a 200 dpi printhead for use with
the Tyco Electronics range of thermal transfer printable pressure
sensitive label products. The T308SN provides network capability
for real time connectivity with the printer. With such connectivity,
print jobs can be modified from any location over the Internet via
Web-based tools. The T308SN printer is also capable of sending
alerts via email enabled wired or wireless devices.
The 300 dpi printhead on the T312S, T312M and T312Z
produces crisp, high quality text, barcodes and graphic images.
The T312S and T312Z are for use with Tyco Electronics thermal
transfer printable pressure sensitive label products. The color-
coded operator cues and auto-calibration features make T312Z an
affordable yet easy to use label printing system. The T312M is
designed for use with Tyco Electronics TMS and HSI wire marker
sleeves, as well as thermal transfer pressure sensitive label
products.
Printer specifications
Tyco Electronics T308S-TTDS-054
T312M-TTDS-066
T312Z-TTDS-115
Print head width 104mm (4.09")
Print head resolution T308S: 8dpmm (203 dpi)
T312M/T312S/T312Z*: 12dpmm (305 dpi)
Print speed (maximum) T308S/T312M/T312S: 203mm/sec
(8 inch/sec)
T312Z*: 154mm/sec (6 inch/sec)
Media sensor Transmissive - adjustable
Reflective (fixed)
Memory T308S/T312M/T312S: 6MB DRAM and
2MB Flash
T308SN: Additional 8MB flash memory
in PCMCIA socket
T312Z*: 4MB DRAM and 1MB Flash
Communication interface Bi-directional parallel (Centronics) and
serial (RS232)
Printer dimensions T308S/T312M/T312S:
283mm W x 495mm D x 394mm H
(11.2" W x 19.5" D x 15.5" H)
T312Z*:
278mm W x 475mm D x 338mm H
(10.93" W x 18.69" D x 13.32" H)
Printer weight T308S/T312M/T312S: 25kg (55 lbs)
T312Z*:15kg (32.4 lbs)
Shipping weight T308S/T312M/T312S: 29kg (63 lbs)
T312Z*:22kg (49 lbs)
Media Specifications
Maximum print width 104mm (4.09")
Maximum media width 114mm (4.48")
Minimum media width T308S/T312M/T312S: 20mm (0.76")
T312Z*: 25.4mm (1.0")
Maximum media roll diameter 203mm (8.0")
Media core diameter 76mm (3.0")
Ribbon wind Ink side out
Product order code Description
T308S-PRINTER T308S thermal printer - standard
T308S-C-PRINTER T308S thermal printer - cutter option
T308S-R-PRINTER T308S thermal printer - internal rewind
option
T308SN-PRINTER T308S thermal printer - network capabilities
T312SN T312S thermal printer - network capabilities
T312S-PRINTER T312S thermal printer - standard
T312S-C-PRINTER T312S thermal printer - cutter option
T312S-R-PRINTER T312S thermal printer - internal rewind
option
T312M-PRINTER T312M thermal printer - standard
T312M-R-PRINTER T312M thermal printer - internal rewind
option
T312Z-PRINTER T312Z thermal printer - standard*
*Not available in Europe, Middle East or Africa
139
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
T400 Series High performance and high speed thermal transfer printers
Printers
Printers
Hardware/Software
The T400 series printers are high performance thermal transfer
printers with narrow to wide printheads suitable for variety of
mission critical applications. The rugged and durable metal
construction makes them a top choice for demanding industrial
and commercial needs.
The enhanced memory and dual 32-bit processor provide
extremely fast data processing and print speeds. T400 series
printers are the best option for high volume and 24 hour duty
cycles. High speed of 12 inch/sec on T408M printers is well
suited for the applications in which labels are needed quickly,
either on demand or in batches. With the highest print resolution
of 600 dpi printhead on the T424S produces unmatched quality
of crisp, high quality text, barcodes and graphic images in a limited
space - ideal for printing linear and 2-dimensional barcodes.
The T408M is designed for use with Tyco Electronics TMS and
HSI wire marker sleeves, as well as thermal transfer pressure
sensitive label products. The T424S is ideal for use with Tyco
Electronics thermal transfer printable pressure sensitive label
products.
Printer specifications
Tyco Electronics T408M-TTDS-015
T424S-TTDS-116
Print head width T408M: 128mm (5.04")
T424S*: 81mm (3.2")
Print head resolution T408M: 8dpmm (203 dpi)
T424S*: 23.5dpmm (600 dpi)
Print speed (maximum) T408M: 305mm/sec (12inch/sec)
T424S: 102mm/sec (4inch/sec)
Media sensor Transmissive and reflective
Reflective (fixed)
Memory 16MB SDRAM and 4MB Flash
Communication interface Bi-directional parallel (Centronics), serial
(RS232), and USB 2.0
Printer dimensions T408M:
283.2mm W x 495.3mm D x 393.7mm H
(11.15" W x 19.5" D x 15.5" H)
T424S*:
263.5mm W x 495.3mm D x 393.7mm H
(10.37" W x 19.5" D x 15.5" H)
Printer weight T408M: 25kg (55 lbs)
T424S*:22.7kg (50 lbs)
Shipping weight T408M: 29kg (63 lbs)
T424S*: 27kg (59 lbs)
Media Specifications
Maximum print width T408M: 128mm (5.04")
T424S*: 81mm (3.2")
Maximum media width T408M: 140mm (5.51")
T424S*: 114mm (4.5")
Minimum media width T408M: 40mm (1.57")
T424S*: 20mm (0.76")
Maximum media roll diameter 203mm (8.0")
Media core diameter 76mm (3.0")
Ribbon wind Ink side out
Product order code Description
T408M-PRINTER T408M thermal printer - standard
T408M-R-PRINTER T408M thermal printer - internal rewind
option
T424S-PRINTER T424S thermal printer - standard*
*Not available in Europe, Middle East or Africa
T400 Series printers are available with wider printhead configurations for
speciality identification applications. Contact Tyco Electronics for such
product requirements.
140 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
T612M–DS Double sided thermal transfer printer
Printers
Printers
Hardware/Software
Specifically designed by Tyco Electronics, the T612M-DS printer
answers a common need in heat-shrinkable wire and cable
identification markers: single-pass printing onto both the front and
back side of the markers simultaneously. Specifically developed
and modified by Tyco Electronics for this application, the T612M-
DS is a high duty cycle, industrially robust thermal transfer printer.
It will print onto the complete range of TMS System Six heat-
shrinkable markers in all sizes from 3/32" (2.4 mm) to 21/4"
(57.2 mm). The data printed onto the two sides of each marker
can be identical or different, same side up or flipped.
Printer specifications
Tyco Electronics T612M-TTDS-098
Print head width 128 mm (5.04")
Print head resolution 12 dpmm (304 dpi)
Print speed (maximum) 50 to128 mm per second
(2 [recommended] to 5 inches per
second)
Media sensor Transmissive and gap
Memory 12MB DRAM and 1 MB flash
Communication interface Parallel (centronics) and serial
(RS232/422)
Printer dimensions 559 mm W x 432 mm D x 508 mm H
(22
"
W x 17
"
D x 20
"
H)
Printer weight 38 kg (84 lbs)
Shipping weight 51 kg (112 ibs)
Media specifications
Maximum print width 112mm (4.4
"
)
Maximum media width 117 mm (4.625
"
)
Maximum media roll diameter 254 mm (10.0
"
)
Media core diameter 26 mm (3.0
"
)
Ribbon wind Ink side out
Product order code Description
T612M-DS-PRINTER Tyco Electronics T612M-DS thermal
printer – standard
141
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
AM6310 Heavy duty dot matrix printer
Printers
Printers
Hardware/Software
Specifically designed by Tyco Electronics, the AM6310 is a heavy
duty industrial dot matrix printer with a high impact 24-pin print
head. Automatic media thickness detection and a high impact
print head make the AM6310 the best industrial printer available
for heavy gauge wire marker and tag materials, and the 24-pin
print head produces high quality text printing with fast print
speeds. Standard AM6310 printer models are designed to print
on Tyco Electronics HSI wire marker sleeves and dot matrix
pressure sensitive label and tag products. AM6310D models are
equipped with dual tractor mechanism necessary for guiding TMS
sleeve product range. Such dual tractor models can also print on
HSI and dot matrix label and tag product range.
Printer specifications
Tyco Electronics TTDS-002
Print head 24-pin high-impact dot matrix
Print speed Max. high-speed draft: 600 cps at 12 cpi
Letter quality: 160 cps at 12 cpi
Print direction Bi-directional, logic seeking
Control panel LCD, 12 keys, select-dial and
quick access setup menu
Feed mechanism Tractor (single or dual)
Memory 2 MB flash
Input buffer 80 KB
Communication interface Parallel port (centronics 36-pin) and
serial port (RS232/DB25)
Printer dimensions 483 mm W x 427 mm D x 208 mm H
19.0
"
W x 16.0
"
D x 8.2
"
H
Printer weight 18.1 kg (40 lbs)
Media specifications
Maximum print width 279 mm (11.0
"
)
Maximum media width 305 mm (12.0
"
)
Minimum media width 25 mm (1.0
"
)
Product order code Description
AM6310-110V Tyco Electronics AM6310 dot matrix
printer – standard 110 V
AM6310-230V Tyco Electronics AM6310 dot matrix
printer – standard 230 V
AM6310D-110V Tyco Electronics AM6310 dot matrix
printer – dual tractor 110 V
AM6310D-230V Tyco Electronics AM6310 dot matrix
printer – dual tractor 230 V
New at Tyco Electronics. Ultra clean dot martrix labels!
Process Improvement - Web Cleaning
To address reported issues with our dot matrix label stock, we sought out equipment
that would help us to remove containments from the label surface and imrpove overall
printability. This contact cleaning/tacky roll system was integrated into our rewind
tables to remove small to microscopic particles down to 1 micron from the label sur-
face. Flood coating the web with black ink showed a cleaning efficiency that was
beyond our expectations.
This 12" roller vacuum style construction helps to reduce waste, imrpove product
quality and save production loss. Containments tend to attach themselves to the labels
surface due to static electricity and moisture which require stringent cleaning tech-
niques. Since implementing the web cleaners, we have seen huge improvements in the
cleanliness of our label stock which has drastically reduced the potential for printing
issues.
Laser Marking Systems
Hardware/Software
142 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
LMS6000 Laser Marking System
Printers
The LMS6000 Laser Marking System is a fully functional, closed-
loop, Ytterbium doped fiber laser system that is fact, efficient,
flexible and reliable. The LMS6000 system comes integrated with
state-of-the-art software and transport systems. These integrated
systems are capable of marking on a variety of flat label materials.
Optional direct marking module provides the capability to mark on
specific metallic and plastic components.
The system comes complete with a fume extraction system to
meet the strictest of emission and safety regulations. If validation is
not required, the system can be fitted with an optional cutter used
to cut the labels as they exit the marking chamber.
Printer specifications
Operating power 85-220V, 50-80Hz - laser
110V, 60 Hz - fume extractor
Maximum output power 10 watts laser power, 0.5mJ
Power consumption 350W Laser only
Operating temperature 10-40˚C
Humidity non-condensing 30-85%
Weight: 42KG
Laser type Ytterbium doped fiber laser, pulsed
Q-switched
Cooling system Air cooled
Beam dimensions TEM-00 (M2<1.4), Plano Spherical 163
Wavelength 1062nm
Pulse width 100nsec
Pulse frequency 20-80MHz
Pilot laser 650nm/1mW
Laser protection class 4
Marking area 130mm x 130mm
Resolution 725-1000 dpi
Beam attenuator Galvo Mirrors, Safety shutter included
Exhaust Integrated fume extractor with Rheostat
control, filter layers and exhaust indicators
Software specifications
Operating system Wndows 2000 and XP, Pentium IV, 500-Mhz,
150 MB hard drive, USB Interface
Graphics All standard dimensional, PLT, DXF, BMP,
JPG,PCX, WMF, EPS, TIFF. all elements can be
scaled, moved, grouped or mirrored
Barcodes 1D - Code 39, Code 93, Code 128, Data
Matrix - ECC200, QRCode
Characters All true type fonts under Windows, filled, out
lined, laser specific double or triple line fonts.
All fonts can be scaled or wobbled stretching,
compressing, circular arc
Integration capabilities Industry standard ERP/MRP systems,
databases and programs
Product order code Description
LMS6000-130 Tyco Electronics LMS6000 laser - standard
LMS6000-XYZ30 Direct part marking module
300mm x 300mm
LMS6000-XYZ80 Direct part marking module
800mm x 800mm
LMS6000-XYZ100 Direct part marking module
1000mm x 1000mm - fume extractor unit
LMS6000-FE-110V Integrated fume extractor system
Verifier/Validator
Part No. LMS6000-VRF-100, integrated data
matrix verifier/validator
Laser Marking Systems
Hardware/Software
143
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
LMS-9000 Laser Marking System
Printers
The LMS-9000 laser marker is a low maintenance laser marking
system designed for high volume users. It is a highly automated sys-
tem including cutting to length, postmark rewinding and double
sided, one step sleeve marking.
Integrated with WinTotal marker sleeve/label marking software, it is
designed for Tyco Electronics wire identification sleeves and
selected labels.
Features and benefits
Simultaneous double-sided laser marking option for marker
sleeves saves considerable time and eliminates any margin
for error
Optional handling system designed to handle several
Tyco Electronics products
Laser marking and cutting for kitting in one integrated step
eliminates post print cutting and kitting
Virtually no product wastage during marking, thanks to a
state of the art product recognition and jogging system
Optional scoring and marking feature for label products
Modular design for easy placement and re-installation
Fully integrated software and hardware
On screen diagnostics
Meets all relevant US and European laser equipment standards
Laser parameters pre-set and software controlled
Product order code Description
Tyco Electronics TTDS-057
LMS-9000 Tyco Electronics LMS-9000 laser – standard
*Please contact your local Tyco Electronics represen-
tative for product configuration per your application.
See page 168 for Laser Markable Label Materials and ordering information.
Tyco Electronics also offers a pre-printing service to customers
who need high quality, durable, permanent laser markers, yet do
not want to invest in the purchase of LMS-9000 equipment at
this time. All pre-printed laser markers, labels or tags are produced
to out exacting quality, manufacturing standards and meet
applicable mark permanence specifications. A variety of System
Six and HSI products including TMS-SCE, D-SCE, HT-SCE, HL and
HLX are available for pre-print base materials along with many
label materials.
Please contact your local Tyco Electronics representative to find
out more about our laser pre-print services.
Scanners and Imagers
Hardware/Software
144 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
BSC-100 Barcode scanners
Accessories
Tyco Electronics BSC-100 barcode scanners are cost effective, full
featured, and fast barcode readers. These combine high image
transfer speed with exceptional image quality. Their omni-
directional reading capability allows fast and easy reading of EAN-
UCC composite codes, 2-dimensional (PDF417, datamatrix) and
Postal codes. It comes with USB connection ready to "point and
shoot" at a complicated looking 2-dimensional barcode or a simple
linear code. It can be used in a wide range of commercial and
industrial applications within government/postal, military,
healthcare, logistics, manufacturing and retail sectors.
General specifications
Symbologies 2 Dimensional:
PDF417, MicroPDF417, MaxiCode,
DataMatrix, QR Code, Aztec, Aztec Mesas,
Code 49 and EAN-UCC composite
Linear:
Codabar, Code 39, Interleaved 2 of 5,
Code 93, Code 128, UPC, EAN, RSS, and
Codablock
Postal:
Postnet, Planet Code, British Post,
Canadian Post, Japanese Post, KIX
OCR fonts:
OCR-A, OCR-B
Power Requirements 4.5 - 12 VDC - powered through USB port
Physical Dimensions 81mm W x 135mm L x 157mm H
(3.2" W x 5.3" L x 6.2" H)
Weight 184.3g (6.5 oz)
Product order code Description
BSC-100 Barcode scanner - standard
Scanners and Imagers
Hardware/Software
145
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
BSC-200 Hand held imager
Accessories
The BSC-200 imager is a portable hand held solution for reading
both linear bar codes and 2D symbols. The BSC-200 reads a wide
range of bar code symbols created from a variety of printing and
marking methods.
Read Area:
The BSC-200 imager’s advanced “dual decode zone”
technology allows the user to easily capture 2D symbols and lin-
ear bar codes at varying distances from 2” to 20” (50.8mm to
508mm). This wide read area allows the symbols to be decod-
ed fast and reliably.
Fast processing speeds also add to the BSC-200’s ability
to acquire and decode multiple symbologies, with no adjust-
ment of the imager required.
Ease of use:
BSC-200 imagers feature point-and-click targeting with
a red laser spot to quickly center the symbol in the field
of view. Beeper, vibrator and multi-purpose LEDs provide real-
time feedback to signal successful decoding.
Applications:
The BSC-200 imager is a strong reading solution for
applications needing to read linear bar codes and 2D
symbologies with a portable handheld device.
System Integration:
BSC-200 imagers are available in 2 configuration options:
- Batch: A wireless way to collect thousands of decoded sym-
bols for later download, capable of performing more than
4000 reads from a single battery charge and buffers a mini-
mum of 1 MB of data in nonvolatile memory.
(battery purchased separately)
- Cabled: Cabled units include USB, RS-232.
(RS-232 available through the purchase of optional
connector kit - contact Tyco Electronics)
Symbologies:
The BSC-200 automatically discriminates between all
major 2D matrix and linear bar code symbologies, and offers
time stamp capabilities for logging data. Symbologies include:
2D Symbologies:
- MaxiCode - QR Code
- Aztec Code - Data Matrix (ECC 200)
Stacked Symbologies:
- UCC Composite
- PDF417 (with Macro support)
- Micro PDF417
Linear Bar Codes:
- Codabar - Codablock F
- GoCode - Code 93
- RSS - Code 39
- Code 128 - Standard postal codes
- UPC/EAN/JAN - Int 2 or 5
BSC-200 Accessories:
- Long-life 1300 mA lithium-ion battery
- Two-bay battery charger
- RS-232 kit
Imager specifications
Imager dimensions 33mm H x 46mm W x 109mm D
(1.3” H x 1.8” W x 4.3” D)
Imager weight: 71.5 g (2.5 oz) not including cable
Handle dimensions 96.5 mm H x 30 mm W x 36 mm D
(1.8” H x 1.2” W x 1.4”D)
Handle weight: 59.8 g (1.2 oz) not including cable
Environmental
Operating temperature 0˚C to 40˚C (32˚F to 104˚F)
Storage temperature -20˚C to 60˚C (-4˚F to 140˚F)
Humidity 5% to 90% (non-condensing)
Electrical
Power requirements 5 VDC (mA)
Typical: 310
Peak: 310
Sleep 3
Read Parameters
Pitch ±60˚C (front to back)
Skew ±60˚
Tilt 360˚
Focal Range 50.8mm to 508mm (2” to 20”)
Rotational Tolerance ±180˚
Print Control Resolution 25% (bar codes), 35% (PDF417),
absolute dark/light reflectance differential
measure at 650 nm
Target Beam Visible laser diode at 630 nm, Class 2
Ambient Light Immunity Sunlight, up to 9,000’ candles 96,890 lux
Shock Withstands multiple drops of 2m (6.5’)
to concrete
Product Order Code
BSC-200 Hand held imager
Scanners and Imagers
Hardware/Software
146 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
VLD-100 Hand held imager/validator
Accessories
The VLD-100 Imager/Validator is optimized to read both linear bar
codes and 2D symbols. It is an aggressive hand held imager/val-
idator for decoding symbols on low contrast substrates such as
metal, plastic, rubber, polyester, vinyl, Kapton, polyvinyl
fluoride and glass. The VLD-100 can read marking methods such
as dot peen, thermal transfer and laser/chemical etch. Containing
custom optics and Tyco Electronics' decode algorithms, the VLD-
100 combines the decoding power of Tyco Electronics'popular
smart camera, VRF-100, into a portable hand held device.
Optical Options:
The VLD-100 hand held imager/validator is available in:
- The high resolution version is custom designed to
optimize resolution for reading small 2D symbols.
LightRay Optics Accessory:
Tyco Electronic’s LightRay Optics solution further enhances its
ability to read directly marked parts. By directing the illumina-
tion toward the symbol at off-axis angles, the LightRay Optics
increase symbol contrast and filters out texture noise. The
LightRay Optics are designed so that it is positioned at the cor-
rect focal distance and angle. No training is needed to find the
best angles for reading low contrast symbols. Either optical
accessory easily attaches on to the end of the VLD-100. Two
options are available: the LightRay Optics 100 Series and the
LightRay Optics 200 Series.
Ease of Use:
The VLD-100 features point-and-click targeting with a red laser
spot to quickly center the symbol in the field of view. Beeper,
vibrator and multi-purpose LEDs provide real-time feedback to
signal successful decoding.
Applications:
The VLD-100 provides outstanding performance validating
challenging 2D codes.
Automotive and Aerospace: reads codes marked on steel, iron,
aluminum, rubber, and glass parts by laser etch, dot peen, metal
stamp, and thermal transfer products.
Electronics: reads codes laser etched on printed circuit boards
and components.
Department of Defense: reads UID codes on a variety of sub-
strates. Software enables it to validate UII code format for
suppliers and constructs the UID string for DoD operators
System Integration:
All Tyco Electronics imagers are available in 2
configuration options:
- Batch: A wireless way to collect thousands of decoded symbols
for later download, capable of performing more than 4000 reads
from a single battery charge and buffer a minimum of 1 MB of data
in non-volatile memory.
- Cabled: Cabled units include USB, RS-232.
(RS-232 available through the purchase of optional
connector kit - contact Tyco Electronics)
Imager specifications
Imager dimensions 33mm H x 46mm W x 109mm D
1.3”H x 1.8”W x 4.3” D)
Imager weight: 71.5 g (2.5 oz) not including cable
Handle dimensions 96.5 mm H x 30 mm W x 36 mm D
(1.8” H x 1.2” W x 1.4”D)
Handle weight: 59.8 g (1.2 oz) not including cable
Environmental
Operating temperature 0˚C to 40˚C (32˚F to 104˚F)
Storage temperature -20˚C to 60˚C (-4˚F to 140˚F)
Humidity 5% to 90% (non-condensing)
Electrical
Power requirements 5 VDC (mA)
Typical: 310
Peak: 310
Sleep 3
Read Parameters
Pitch ±60˚C (front to back)
Skew ±60˚
Tilt 360˚
Focal Range 25 to 508 mm (1” to 20”)
Rotational Tolerance ±180˚
Print Control Resolution 25% (bar codes), 35% (PDF417),
absolute dark/light reflectance differential
measure at 650nm
Target Beam Visible laser diode at 630 nm, Class 2
Ambient Light Immunity Sunlight, up to 9,000’ candles 96,890 lux
Shock Withstands multiple drops of 2m (6.5’)
to concrete
Product Order Code
VLD-100 Hand held imager/validator
LightRay Optics 100 Series
generates off-axis diffuse
illumination
LightRay Optics 200 Series
generates dark field
illumination
Symbologies:
The VLD-100 imager/validator reads all standard linear
bar codes plus:
2D Symbologies:
- Data Matrix (ECC 0200) - QR Code
- MaxiCode - Aztec Code
Stacked Symbologies:
- UCC Composite - PDF417 (Macro Support)
- Micro PDF417
Scanners and Imagers
Hardware/Software
147
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
VRF-100 Production ready data matrix verifier
Accessories
The VRF-100 is an ISO/IEC 15415 and AS9132-compliant Data
Matrix verifier for use in production environments. The VRF-100
helps to ensure that your marks will be verified accurately every
time.Unlike most verifiers that are mounted on stands designed
for the lab environment, the VRF-100 Verifier is a fully-contained,
compact device that is easy to integrate into the production
environment. The VRF-100 Verifier is factory-calibrated to specific
traceability standards with a fully-contained housing, making it
easy to integrate into existing applications. No on-site calibration
of optics or lighting is needed to verify marks with the Verifier.
Simply present the part to the Verifier, trigger, and receive the
symbol quality report.
Production-Ready
It is the first 2D verifier designed specifically for use in a produc-
tion environment. Its compact, lightweight design makes the
Verifier easy to integrate into production processes. A self-
contained, factory-calibrated system with flexible mounting
allows the Verifier to be adapted to any application quickly and
easily.
Calibrated System
It provides the user with a ready-to-use, ISO/IEC 15426-2
calibrated system. Simply present the part, trigger, and the
Verifier will output the results. The user is not required to focus
the optics, set the light angles. Fixed optics and pre-set illumina-
tion angles make the verifier consistent, reliable and accurate.
Illumination Chamber
The Verifier’s fully-enclosed illumination chamber provides the
controlled lighting environment for accurate, repeatable verifica-
tion. The chamber is specifically engineered to produce the
illumination angles required by the ISO/IEC 15415 standard.
VRF Software
Offers complete symbol verification reports in a variety of
formats: PDF, CSV, HTML and RTF.
ISO/ICE 15426-2 Certified
The Verifier is ISO/IEC 15426-2 certified. It is precisely
engineered to meet rigorous verification standards, ensuring
accurate and consistent verification.
ISO/IEC 15415 Compliant
The Verifier provides verification of 2D symbols for
parameters:
- Symbol contrast - Fixed pattern damage
- Modulation - Reference decode
- Axial non-uniformity algorithms
- Grid non-uniformity - Unused error
- Print growth (ungraded) correction
• AS9132
Verifies Data Matrix symbols in accordance with the
parameters called out in the AS9132 standard:
- Quiet Zone - Dot ovality
- Cell fill - Contrast
- Dot center offset - Angle of distortion
- Symbol type
MIL-STD 130
Requires verification of Data Matrix symbols to both ISO/IEC
15415 and AS9132 standards as required by the MIL STD
130 specification.
Imager specifications
Imager dimensions 307 mm H x 127 mm W x 122 mm D
(12.1” H x 5.0” W x 4.8” D )
Environmental
Operating Temperature 0˚C to 40˚C (32˚F to 104˚F)
Storage Temperature -50˚C to 75˚C (-58˚F to 167˚F)
Humidity Up to 90% (non-condensing)
Electrical
Power Requirements Input, 10 to 28 VDC, 200 mV- P-P max.
ripple, 270 mA at 24 VDC (typ. CMOS),
333 mA at 24 VDC (typ. CCD)
Trigger, New Master, Input 1: (Optoisolated)
5 to 28 VDC rated (12 mA at 24 VDC)
Outputs 1/2/3: (Optoisolated) 1 to 28
VDC rated, (I CE < 100 mA at 24 VDC,
current limited by user)
Product Order Code
VRF-100* Data matrix verifier
*not available in Europe, Middle East, or Africa
Ribbons
Hardware/Software
148 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Thermal transfer ribbons
Ribbons
101-4RPSCE
Tyco Electronics 101-4RPSCE
is a high durability black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics TMS-SCE, RPS wire
marker sleeve products and SB
self-laminating labels. For
reliable print performance and
durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 74 meters (242 feet)
Ink Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T208M, T212M
Compatible materials TMS-SCE, RPS, SB
Ordering information
Product order code TMS-101-RIBBON-4RPSCE
Description Tyco Electronics 4RPSCE thermal transfer ribbon for T208M and T212M printers
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 300 meters (984 feet)
Ink Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T308S, T312M, T312Z**, T408M, T612M-DS, T312S
Compatible materials TMS-SCE, RPS, SB, HL, HS, HC
**Not available in Europe, Middle East or Africa
Ordering information
Product order code TMS-RJS-RIBBON-4RPSCE
Description Tyco Electronics 4RPSCE thermal transfer ribbon for T308S, T312S, T312M, T312Z**,
T408M and T612M-DS printers
**Not available in Europe, Middle East or Africa
RJS-4RPSCE
Tyco Electronics RJS-4RPSCE
is a high durability black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics TMS-SCE, RPS and
HL cable markers wire marker
sleeve products. For reliable
print performance and durabili-
ty use with Tyco Electronics
recommended compatible
printers.
RJS-4HT
Tyco Electronics RJS-4HT is a
high temperature black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics HT-SCE high
temperature wire marker
sleeve products. For reliable
print performance and
durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 300 meters (984 feet)
Ink Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T312M, T408M, T612M-DS
Compatible materials HT-SCE, HTCM-SCE-TP (T312M only)
Ordering information
Product order code TMS-RJS-RIBBON-4HT
Description Tyco Electronics 4HT thermal transfer ribbon for T312M, T408M and T612M-DS printers
149
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Thermal transfer ribbons
Ribbons
Ribbons
Hardware/Software
101-4HT
Tyco Electronics 101-4HT is a
high temperature black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics HT-SCE high
temperature wire marker
sleeve products. For reliable
print performance and
durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 74 meters (242 feet)
Ink Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T208M, T212M
Compatible materials HT-SCE
Ordering information
Product order code TMS-101-RIBBON-4HT
Description Tyco Electronics 4HT thermal transfer ribbon for T208M and T212M printers
1910
Tyco Electronics 1910 is a
high durability high contrast
resin/wax thermal transfer
ribbon tested and approved for
use on the HLX-zero halogen
cable marker tape and the
HXTM-FB rail tags. For reliable
print performance use with
Tyco Electronics
recommended printers.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 210 meters (689 feet)
Ink Resin/wax
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T408M
Compatible materials HLX, HXTM-FB
Tyco Electronics TTDS-080
Ordering information
Product order code 1910-RIBBON-4T300
Description Tyco Electronics 1910 thermal transfer ribbon for T408M printers
1966 - RIBBON
Tyco Electronics
1966-RIBBON is an ultra- high
durability black resin thermal
transfer ribbon tested and
approved for use on Tyco
Electronics HX, HX-SCE and
D-SCE wire marker sleeves as
well as CM-SCE-TP and HLX
cable markers. See right for
compatible materials. For
reliable print performance and
durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Tyco Electronics TTDS-099
Ribbon width 100 mm (3.9 inches)
Ribbon length 300 meters (984 feet)
Ink Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printer T312M
Compatible materials CM-SCE-TP, D-SCE, HLX, HS, HX, HXTM-FB, HX-SCE, HL
Ordering information
Product order code 1966-RIBBON
Description Tyco Electronics 1966 thermal transfer ribbon for T312M
T200-RIBBON-1966
Tyco Electronics T200-
RIBBON-1966 is an ultra- high
durability black resin thermal
transfer ribbon tested and
approved for use on Tyco
Electronics HX-SCE wire
marker sleeves. See right for
compatible materials. For
reliable print performance and
durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Ribbon width 100 mm (3.9 inches)
Ribbon length 74 meters (242 feet)
Ink Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T212M
Compatible materials HX-SCE, D-SCE, HLX-NEL
Ordering information
Product order code T200-RIBBON-1966
Description Tyco Electronics 1966 thermal transfer ribbon for T212M
150 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Thermal transfer ribbons
Ribbons
Ribbons
Hardware/Software
1330-0606
Tyco Electronics 1330-0606
is a high durability black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics thermal transfer
printable pressure sensitive
labels. See right for compatible
materials. For reliable print per-
formance and durability use
with Tyco Electronics
recommended compatible
printers.
General specifications
Ribbon width* 110 mm (4.33 inches)
Ribbon length 300 meters (984 feet)
Ink Wax/Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T308S, T312M, T312S, T312Z**, T408M
Compatible materials SB, NC, WP, HW, MP, HM, MV
* Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa
Ordering information
Product order code 1330-0606-10
Description Tyco Electronics RHQ thermal transfer ribbon for all T300 and T400 printers
1330-0607
Tyco Electronics 1330-0607
is a high durability black resin
thermal transfer ribbon tested
and approved for use on Tyco
Electronics thermal transfer
printable pressure sensitive
labels. See right for compatible
materials. For reliable print per-
formance and durability use
with Tyco Electronics
recommended compatible
printers.
General specifications
Ribbon width* 110 mm (4.33 inches)
Ribbon length 300 meters (984 feet)
Ink Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T308S, T312M, T312S, T312Z**, T408M
Compatible materials CP, HM, HMM, HPK, HW, MP, MV, NC, PVF, TN, TTP, WP, WV, TP, HLTM, SP
* Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa
Ordering information
Product order code 1330-0607-10
Description Tyco Electronics RHD thermal transfer ribbon for all T300 and T400 printers
1330-0619
Tyco Electronics 1330-0619
is a high temperature black
resin thermal transfer ribbon
tested and approved for use on
Tyco Electronics thermal trans-
fer printable Kapton®labels.
See right for compatible mate-
rials. For reliable print perform-
ance and durability use with
Tyco Electronics recommend-
ed compatible printers.
General specifications
Ribbon width* 110 mm (4.33 inches)
Ribbon length 300 meters (984 feet)
Ink Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T308S, T312M, T312S, T312Z**, T408M
Compatible materials T1K, T2K, TSK, T2Y, KTT
* Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa
Ordering information
Product order code 1330-0619-10
Description Tyco Electronics RHT thermal transfer ribbon for all T300 and T400 printers
1330-0607-T200
Tyco Electronics 1330-0607-
T200 is a high durability black
resin thermal transfer ribbon
tested and approved for use on
Tyco Electronics thermal trans-
fer printable pressure sensitive
labels. See right for compatible
materials. For reliable print
performance and durability
use with Tyco Electronics
recommended compatible
printers.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 74 meters (242 feet)
Ink Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T208M, T212M
Compatible materials HM, HMM, HW, MP, MV, NC, TN, TTP, WP, WV,HPK
Ordering information
Product order code 1330-0607-T200
Description Tyco Electronics RHD thermal transfer ribbon for T208M and T212M printers
151
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Thermal transfer ribbons
Ribbons
Ribbons
Hardware/Software
1330-0600
Tyco Electronics 1330-0600
is a high quality black wax ther-
mal transfer ribbon tested and
approved for use on Tyco
Electronics thermal transfer
printable paper labels. See
right for compatible material.
For reliable print performance
and durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Ribbon width* 110 mm (4.33 inches)
Ribbon length 300 meters (984 feet)
Ink Wax
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T308S, T312M, T312S, T312Z**, T408M
Compatible materials EP
* Available in additional sizes by custom quotation **Not available in Europe, Middle East or Africa
Ordering information
Product order code 1330-0600-10
Description Tyco Electronics RS thermal transfer ribbon for all T300 and T400 printers
1330-0600-T200
Tyco Electronics 1330-0600-
T200 is a high quality black
wax thermal transfer ribbon
tested and approved for use on
Tyco Electronics thermal trans-
fer printable paper labels. See
right for compatible material.
For reliable print performance
and durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 74 meters (242 feet)
Ink Wax
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T208M, T212M
Compatible materials EP
Ordering information
Product order code 1330-0600-T200
Description Tyco Electronics RS thermal transfer ribbon for T200 printers
3300
Tyco Electronics 3300 is a
high durability black resin ther-
mal transfer ribbon tested and
approved for use on Tyco
Electronics thermal transfer
printable pressure sensitive
labels. See right for compatible
materials. For reliable print
performance and durability
use with Tyco Electronics
recommended compatible
printers.
General specifications
Ribbon width* 110 mm (4.33 inches)
Ribbon length 300 meters (984 feet)
Ink Resin
Standard color Black
Ribbon wind direction Ink side out
Compatible printers T308S, T312S, T312M, T312Z, T408M
Compatible materials PVF, TTVF
* Available in additional sizes by custom quotation
Ordering information
Product order code 1330-3300-10
Description Tyco Electronics 3300 thermal transfer ribbon for all T300 and T408M printers
T300–WH
White resin based ribbons are
available to print on Tyco
Electronics TMS-SCE wire
marker sleeve products. For
print performance and
durability use with Tyco
Electronics Electronics
recommended compatible
printers.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 300 meters (984 feet)
Ink Resin
Standard color White
Ribbon wind direction Ink side out
Compatible printers T308S, T312S, T312Z**, T312M and T-408M
Compatible materials TMS-SCE (T312M only), CP, TTP
**Not available in Europe, Middle East or Africa
Ordering information
Product order code T300–RIBBON–WH
Description Tyco Electronics thermal transfer ribbon for T300 and T400 printers
152 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Thermal transfer ribbons
Ribbons
Ribbons
Hardware/Software
T300–WH–4HT
White resin based ribbons are
available to print on Tyco
Electronics HT-SCE wire
marker sleeve products. For
print performance and
durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Ribbon width 114 mm (4.49 inches)
Ribbon length 300 meters (984 feet)
Ink Resin
Standard color White
Ribbon wind direction Ink side out
Compatible printers T312M
Compatible materials HT-SCE
Ordering information
Product order code T300–RIBBON–WH–4HT
Description Tyco Electronics thermal transfer white ribbon for all T308M. T312M and T408M printers
T200–WH
White resin based ribbons are
available to print on Tyco
Electronics TMS-SCE wire
marker sleeve products. For
print performance and
durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 70 meters (230 feet)
Ink Resin
Standard color White
Ribbon wind direction Ink side out
Compatible printers T208M, T212M
Compatible materials TMS-SCE (T212M only) HM, MP, MV, TTP
Ordering information
Product order code T200-RIBBON-WH
Description Tyco Electronics thermal transfer white ribbon for T200 printers
T200–WH–4HT
White resin based ribbons are
available to print on Tyco
Electronics HT-SCE wire
marker sleeve products. For
print performance and
durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 74 meters (242 feet)
Ink Resin
Standard color White
Ribbon wind direction Ink side out
Compatible printers T212M
Compatible materials HT-SCE
Ordering information
Product order code T200–RIBBON–WH–4HT
Description Tyco Electronics thermal transfer white ribbon for T200 printers
RHCA
RHCA resin based ribbons are
specifically designed to print
on polyester or metalized
polyester Tyco Electronics
label products. For print
performance and durability
use with Tyco Electronics
recommended compatible
printers. It is not suitable to
print on paper or
self-laminating products.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 91 meters (300 feet)
Ink Resin
Standard color Red, Blue and Green (see ordering information below)
Ribbon wind direction Ink side out
Compatible printers T308S, T312M, T312S, T312Z** and T408M
Compatible materials CP, HW, HM, HPK, HMM, MP, MV, PVF, WP, WV
**Not available in Europe, Middle East or Africa
Ordering information
Product order codes 1330-0620-10 (Red) 1330-0621-10 (Blue) 1330-0622-10 (Green)
Description Tyco Electronics thermal transfer color ribbon for all T300 and T400 printers
153
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Thermal transfer ribbons
Ribbons
Ribbons
Hardware/Software
RHCB
RHCB wax-resin based
ribbons are specifically
designed to print on paper.
For print performance and
durability use with Tyco
Electronics recommended
compatible printers.
General specifications
Ribbon width 110 mm (4.33 inches)
Ribbon length 300 meters (9840 feet)
Ink Wax-Resin
Standard color Red, Blue and Green (see ordering information below)
Ribbon wind direction Ink side out
Compatible printers T308S, T312M, T312S, T312Z** and T408M
Compatible materials EP
* *Not available in Europe, Middle East or Africa
Ordering information
Product order codes 1330-0630-10 (Red) 1330-0631-10 (Blue) 1330-0632-10 (Green)
Description Tyco Electronics thermal transfer color ribbon for all T300 and T400 printers
154 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Dot matrix ribbons
Ribbons
Ribbons
Hardware/Software
RIBBON A
Tyco Electronics RIBBON A is a
permanent black ink dot matrix
ribbon tested and approved for
use on Tyco Electronics TMS-
SCE wire marker sleeves and
RMK-6 products on the
LQ870 printer. See right for
compatible materials.
QUICK-DRY LQ870
Tyco Electronics
QUICK-DRY LQ870 is a quick
drying indelible black ink dot
matrix ribbon tested and
approved for use on Tyco
Electronics dot matrix printable
pressure sensitive labels on the
LQ870 printer. See right for
compatible materials.
General specifications
Ink Standard
Standard color Black
Compatible printer LQ870
Compatible materials CM-SCE, D-SCE, RMK-6, RPS, TMS-SCE
Ordering information
Product order code TMS-SYSTEM-SIX-RIBBON-A
Description Tyco Electronics dot matrix Ribbon A for LQ870 printer
General specifications
Ink RI Quick-Dry
Standard color Black
Compatible printer LQ870
Compatible materials C, DMVF, E, HLTM, K, M, NMX, PV, TW
Ordering information
Product order code 1330-0037-00
Description Tyco Electronics Quick-Dry dot matrix ribbon for LQ870 printer
155
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Dot matrix ribbons
Ribbons
Ribbons
Hardware/Software
STANDARD AM6310
Tyco Electronics
STANDARD AM6310 is a
permanent black ink dot matrix
ribbon tested and approved for
use on Tyco Electronics wire
marker sleeves and cable
marker products on the
AM6310 printer. See right for
compatible materials.
HIGH-PERF AM6310
Tyco Electronics HIGH-PERF
AM6310 is a high perform-
ance, permanent black ink dot
matrix ribbon tested and
approved for use on Tyco
Electronics wire marker sleeves
and cable marker products on
the AM6310 printer. See right
for compatible materials.
QUICK-DRY AM6310
Tyco Electronics
QUICK-DRY AM6310 is a
quick drying indelible black ink
dot matrix ribbon tested and
approved for use on Tyco
Electronics dot matrix printable
pressure sensitive labels on the
AM6310 printer. See right for
compatible materials.
General specifications
Ink Standard
Standard color Black
Compatible printer AM6310, AM6310D
Compatible materials CM-SCE, D-SCE*, HC, HL, HLTM-FB, HM, HS, RMK-6, RPS*, TMS-SCE*, MultiMark
Ordering information
Product order code 1892BK04-RIBBON
Description Tyco Electronics standard dot matrix ribbon for AM6310 printer
* Available only with AM6310D models
General specifications
Ink High performance
Standard color Black
Compatible printer AM6310, AM6310D
Compatible materials HM, HX
Ordering information
Product order code 1892BK03-HIGH-PERF-RIBBON
Description Tyco Electronics high performance dot matrix ribbon for AM6310 printer
General specifications
Ink RI Quick-Dry
Standard color Black
Compatible printer AM6310, AM6310D
Compatible materials C, DMVF, E, HLTM, HPC, HPTM, K, M, NMX, PV, TW
Ordering information
Product order code 1892BK01
Description Tyco Electronics Quick-Dry dot matrix ribbon for AM6310 printer
156 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
WinTotal Wire marker and label printing software
Software
Software
Hardware/Software
WinTotal software is a powerful 32-bit label/marker design
package that makes wire marker printing simple in an industrial
environment. Running in the familiar Windows environment, the
package is pre-loaded with all the Tyco Electronics wire
identification products to facilitate marker design. The software
features a highly graphical user interface to simplify operator
training and minimize errors. The Windows environment gives
access to a huge array of font options, including non-English fonts
such as Chinese, Japanese and Hebrew (when used with
appropriate operating systems or add-on software), and also
allows simple importing and manipulation of graphics and logos.
Bar code printing is available.
WinTotal software supports all common wire identification needs,
including:
Manual printing
Automatic set printing from spreadsheets, databases
or other CAD systems (including Tyco Electronics’s
HarnWare®harness design software package)
Incremental alpha and numeric fields
Double-sided marker printing
Automatic or manual routing or multiple printers
Paper output option
Wraparound marker production
User-defined products
Programmable buttons for repeated data insertion
The software can be password protected at different levels to
prevent unauthorized use, and can be run on networked
computers so that the design function can be separated from
printing. The display can be set to several different languages,
and a full on-screen Help function is incorporated.
Running behind the simple WinTotal user interface is a powerful
label-making package, so the software can be used to design and
print general labeling applications such as rating plates and
shipping labels.
Features and benefits
Powerful wire marker design and print software
Familiar Windows user environment
Pre-loaded with Tyco Electronics identification products
Powerful import and export functions: reads wire lists
from spreadsheets, databases and text files from CAD systems
Printer multi-tasking
Multiple on-screen languages
Specifications
TTDS-001
157
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
WinTotal Wire marker and label printing software
Software
Software
Hardware/Software
Minimum recommended computer configuration
Computer IBM-compatible PC
Processor Intel Pentium®processor, 400 MHz minimum
RAM 64 MB minimum (128 MB for Windows NT, 2000 and XP)
Operating system Windows 95, 98, ME or NT (Service pack 6), 2000 and XP
Disk space required 25 MB minimum
Other technical information
Barcode types Codabar, code 39, code 93, code 128, EAN-13, EAN-8, UPC-E, Interleaved 2/5, ITF (DUN14), PDF 417, DataMatrix
Company logo or graphics Can be imported in BMP, PCX, MSP, WMF, JPG, JIF, GIF formats
Text and graphics Can be rotated, moved or resized
Ordering information
Ordering description Product description
TMS-WINTOTAL-SWARE Tyco Electronics Wire Marker Printing Software – Windows, 32 bit
Support
Free technical support
OS Support: Windows 95, 98, ME, NT, 2000, XP
International language support
Label design
WYSIWYG label design and display
Align text left, right, justified or center
Built-in printer font support
Windows True Type fonts
Lines, boxes and graphic images
Resize, rotate and stretch text, graphics and bar codes
Thumbnail preview of saved labels
Printing
Set and batch printing capabilities
Multiple application port printing (MAPP)
Double sided marker printing
Local or network printer support
Number of identical or serialized copies selectable
from database
Serialization
Increment or decrement by any interval
Numeric, alphanumeric and custom base serialization
Database options
Microsoft ODBC support, including: Access, Excel and dBase
ASCII text files
AutoCAD importing
Data management
Visual Basic scripting for custom data processing.
Sharable data fields
Multiple products within one set or batch
Features and benefits (continued)
158 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
PrintEasy Label printing software
Software
Software
Hardware/Software
Tyco Electronics PrintEasy is a powerful yet easy to use Windows
based label design and printing software. With PrintEasy you can
quickly and easily combine bar codes, text and graphics into
professional quality labels. Carefully organized menus and pop-up
dialogs display all your options in plain, easy to understand words.
The true WYSIWYG display allows you to create and view your
labels with precision, giving you total control over your labels’
appearance before printing. PrintEasy is ideal for use with the Tyco
Electronics range of thermal transfer printable pressure sensitive
label products. PrintEasy is pre-loaded with all of Tyco Electronics’s
standard thermal transfer label templates, which allows you to sim-
ply select the Tyco Electronics part number you want to print and
you are ready to go!
Features and Benefits
Support
Free technical support
OS Support: Windows 95, 98, ME, NT, 2000, XP
International language support
Label design
True WYSIWYG label design and display
Built-in printer font support
Windows True Type fonts
Reverse (white on black) text printing
Align text left, right, justified or center
Unlimited Undo/Redo command
Lines, boxes and graphic images
Import graphics in BMP, JPG, TIF, PCX, DCX, DIB,
EPS and others
Resize, rotate and stretch objects
Thumbnail preview of saved labels.
Metric and US measurement systems
Bar codes
Numerous 1D and 2D symbologies
Unlimited width and height
Sequentially numbered bar codes
Place characters above or below bar codes or
do not print
Option to display Start/Stop characters
Able to print MIL-STD-130 UID Syntax
Printing
Printer-based bar codes and serial numbers
Speed optimization using repetitive data control
Local or network printer support
Performance-enhancing printer controlled serialization
Number of identical or serialized copies selectable
from database
Specifications
TTDS-093
159
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
PrintEasy Label printing software
Printers
Software
Hardware/Software
Minimum recommended computer configuration
Computer IBM-compatible PC
Processor Intel Pentium®processor, 200 MHz minimum
RAM 32 MB minimum
Operating system Windows 95, 98, ME or NT (Service pack 6), 2000 and XP
Disk space required 15MB to 80 MB minimum (depending on installation options)
Ordering information
Ordering description Product description
PRINTEASY –BASIC Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet printers**
PRINTEASY –ECC4 Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser, Inkjet, ECC4 and T200 printers**
PRINTEASY –PRO Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet and Full Thermal Transfer support
PRINTEASY –SUITE Tyco Electronics Label Printing Software – Windows, 32 bit version for Laser and Inkjet and Full Thermal Transfer support
with additional modules
PRINTEASY –NET05 Tyco Electronics Label Printing Software – Windows, – Network version with 5 user license
PRINTEASY –NET10 Tyco Electronics Label Printing Software – Windows, – Network version with 10 user license
**Available in Europe, Middle East and Africa
Serialization
Increment or decrement by any interval
Separate Rollover/Rollunder and Value Reset options
Preserve or expand field length when rolling over
Numeric, alphanumeric and custom base serialization
Database options
Microsoft ODBC support, including: Access, Btrieve
dBase, Excel, Oracle, Paradox, Clipper, FoxPro,
Interbase and more.
ASCII text files
SAP (mySAP.com and R/3)
Versatile multiple-table data access
Import variable graphics from databases
Data query wizard
Individual record-picking at print time
Data management
Visual Basic scripting for custom data processing
User-definable minimum and maximum field lengths
Customizable data-entry filters and error checking
Multi-data source selection per label object
Easy entry of special and unprintable control characters
Sharable data fields
Customizable message box handling
Integration
Command line interface option
Pre-loadable into “background” to avoid start-up delays
Dynamically selectable label formats and data sources
Error logging
Features and Benefits (continued)
160 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
HL2010E/HL1910E
Application Systems
Application Systems
Hardware/Software
The HL2010E and HL1910E Hot air heaters are designed to work
with a standard line voltage (230V) on a wide variety of Raychem
heat-shrinkable products. These tools are suitable for occasional
use and are not recommended for applications requiring high duty
cycles. Both tools supply forced hot air with an adjustable heat set-
ting to meet the requirements of many different installation situa-
tions. A three position switch controls the air flow (150/300/500
l/min).
The HL2010E tool is switched on and off at the three-stage switch
and the temperature can be continuously adjusted over a range of
50˚C -630˚C by the pushbuttons. The temperature can be
increased or reduced by 10˚C steps. An LCD display shows the
actual temperature.
The HL1910E tool is switched on and off at the two-stage switch
and the temperature can be continuously adjusted over a range of
50˚C - 600˚C at the thumbwheel (the numbers on it serve as a
guide only, 1 means 50˚C and max. temperature of 600˚C is
attained at 9).
A bench stand allowing use of both the HL2010E and the
HL1910E as a bench tool is available as an option. Furthermore, it
requires only two reflectors to cover most applications of heat-
shrinkable tubing and SolderSleeve terminations.
*Available in Europe only
Specifications
Voltage 230V AC
Power 2000W
Air flow 150 - 500 l/min
Weight 920g
Length 280mm
Noise <70 dB
Ordering description Product description PCN
HL2010E-230V tool HL2010E-230V-Euro C99451-000
HL2010E-230V-UK A22932-000
HL2010E-Kit-230V-Euro A23120-000
HL1910E-230V tool HL1910E-230V-Euro F30529-000
HL1910E-230V-UK F11734-000
HL1910E-Kit-230V-Euro A93538-000
Accessories
HL2010E/HL1910E tool HL1802E-074616-SolderSleeve 832011-000
Terminators Reflector
HL1802E-070519-Heat-shrinkable 022611-000
Tubings Reflector
HL1802E-070618 -9mm Adaptor 930321-000
HL1802E-070717-14mm 868259-000
Reduction Nozzle
HL1802E-070816-20mm 613361-000
Reduction Nozzle
HL1802E-ADAP-PR-Adaptor 444817-000
for PR Series Reflector
HL1802E - Bench-Std 717083-000
The HL2005E heatgun is supplied with a 3 year warranty statement by Steinel. This
warranty does not apply when used in a manufacturing environment as opposed to a
DIY environment. The 12 month warranty usually offered by Tyco on all tooling
applies (see conditions in warranty statement).
Application Systems
Hardware/Software
AMP-TY Nylon cable ties
161
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Cable Marker Tools and Accessories
AMP-TY All-Nylon Cable Ties provide a strong, durable way to
bundle and harness cable quickly and economically. They can be
used on virtually any bundle configuration, in diameters ranging
from 1/16 [1.58] to 10 [254.00]. AMP-TY Cable Ties are resist-
ant to common solvents, alkalies, dilute acids, oils and greases.
All packages are heat sealed to retain moisture. Do not open
package until you are ready to apply the ties.
Features and benefits
Self-locking application by hand or hand tool provides versatility
Tapered tip speeds up threading and reduces applied cost
Interior serrations help hold individual wires in place through
friction
Tough, smooth nyon may be used in outdoor and indoor
applications. Black, UV-resistant ties are rcommended for
outdoor use
Specific parts meet the requirements of MIL-S-23190. See
MS3367 and MS3368 part number notations
All-nylon design eliminates metal components
Recognized under the Component
Program of Underwriters
Laboratories Inc., File No. E73541
R
Fast and Easy to Apply
1. Gather cables together. 2. Apply hand-tight.
3. Snug-up with tool. 4. Finished tie holds cables firmly.
Application Systems
Hardware/Software
AMP-TY Nylon cable tie accessories
162 Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Cable Marker Tools and Accessories
Cable Tie Mount
(Screw Type)
Two-Way
Cable Tie Mount
Permits entry from two sides.
Available in two sizes.
Four-Way
Cable Tie Mount
Permits entry from four sides.
Available in two sizes.
Cable Tie
Swivel Mount
with Adhesive Back
and Screw Holes
(0.187 [4.75] Dia.)
AMP-TY Application Tool
1 [25.4] x 1 [25.4], two 0.187
[4.75] Dia. Screw Holes, with
Adhesive Back. Accommodates
ties with maximum
tensile strength of 30 lbs. [133.5
N]
PPaarrtt NNoo.. 660077884477--11
Package of 100
*The rubber-based adhesive backing on these mounts has a tensile strength of 6 lbs. [26.7 N] per
square inch. This rating applies in temperatures from -50°F [-45°C] to 180°F [82°C]. For best
performance, mounts should be applied to a smooth, clean, dry, and oil-free surface.
0.75 [19.05] x 0.75 [19.05], two
#4 Screw Holes, with Adhesive*
Back. Accommodates ties with
maximum tensile strength of 30
lbs. [133.5 N]
PPaarrtt NNoo.. 660088880022--11
Package of 100
1.13 [28.70] x 1.13 [28.70], two
#8 Screw Holes, with Adhesive*
Back. Accommodates ties with
maximum tensile strength of 50
lbs. [222.5 N]
PPaarrtt NNoo.. 660088880033--11
Package of 100
0.38 [9.65] x 0.6 [15.24], #6
Screw Hole, without Adhesive
Back. Accommodates ties with
maximum tensile strength of 50
lbs. [222.5 N]
PPaarrtt NNoo.. 660088880011--11
Package of 100
1.13 [28.70] x 1.13 [28.70] , #6
Screw Hole, with Adhesive* Back.
Accommodates ties with maxi-
mum
tensile strength of 50 lbs. [222.5
N]
PPaarrtt NNoo.. 660088880000--11
Package of 100
Accommodates ties with maxi-
mum tensile strength of 50 lbs.
[222.5 N]
PPaarrtt NNoo.. 11--33550
0008877--00
Package of 100
PPaarrtt NNoo.. 22--335500008877--00
Package of 1000
Note: Screw not included
Economy
Application Tool
Part No. 734587-1 (Color — blue)
IS 408-8816
Tool operates on cable ties up to 50
lbs. [222.5 N] tensile value. It has a
tensionadjustment and cuts off the
end of the tie.
R
163
Catalog 1654227 Dimensions not italicized are Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 04-07 in millimeters while dimensions reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
in inches are italicized. Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Engineering Notes
Application Systems
Application Systems
Hardware/Software