1
Power entry modules without line filter 1064
https://www.schurter.com /PG05
Connectors
IEC Appliance Inlet C14 or C18 with Fuseholder 1- or 2-pole
Snap-in version
Approvals and Compliances
C14
70° C
C18
70° C
Description
- Panel Mount :
Snap-in version , from front side Appliance Inlet , Protection class I
, Fuseholder for fuse-links 5 x 20 mm
- Meets the requirements of IEC 60335-1 for appliances in unattended
use. This includes the enhanced requirements of glow wire tests acc.
to IEC 60695-2-12 and -13.
- Solder terminals or quick connect terminals
Characteristics
- The fuse drawer "Fingergrip" can be removed by hand
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC 10 A / 250 VAC; 50 Hz
Ratings UL/CSA 10 A / 250 VAC; 60 Hz
Dielectric Strength > 3 kVAC between L-N
> 1.5 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Tempe-
rature
-25 °C to 70 °C
IP-Protection from front side IP 20 acc. to IEC 60529
Insulation cover Suitable for appliances with protection
class I or II acc. to IEC 61140
Terminal Solder terminals or quick connect ter-
minals
Panel Thickness S Snap-in
1.0 - 2.5 mm
Material: Housing PA6, black / grey / white, UL 94V-0
appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class I or II
Fuseholder 1 or 2 pole, acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
Power Acceptance @ Ta >
23°C
Admissible power acceptance at higher
ambient temperature see derating cur-
ves
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 1064
Approval Logo Certificates Certification Body Description
SEMKO Approvals SEMKO Certificate Number: SE/09137-1A
UL Approvals UL UL File Number: E93617
CSA Approvals CSA CSA Certification Record: 27324
CSA Approvals CSA CCC File Number: 27324
2
Power entry modules without line filter
1064 https://www.schurter.com /PG05
Connectors
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements
Designed according to UL 498 Standard for Attachment Plugs and Receptacles
Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets
the requirements for appliances in unattended use. This includes the en-
hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG EU Directive RoHS 2011/65/EU
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
Dimensions [mm]
3522.2
31
31
32 5
26.7
28
R 4.5
R 3
316.5
R <3
26.9+0.2
- 0
31.5+0.2
- 0
Length of the terminal please find at the order code configuration table
3
Power entry modules without line filter 1064
https://www.schurter.com /PG05
Connectors
Derating Curves
Fuses
5 x 20 mm (1-pole)
Admissible power acceptance in Watt
1.5
1.0
0.5
0.0
2.5
2.0
020406080 100
I = << In
I = 0.7 In
I = 1.0 In
Ambient air temperature Ta °C
2-pole
Admissible power acceptance in Watt
per pole
020406080 100
0.2
0.0
I = << In
I = 0.7 In
I = 1.0 In
1.6
0.6
0.4
0.8
1.2
1.0
1.4
Ambient air temperature Ta °C
Config. Code
1064|-|H|-|A|B|C|N|-|D|-|E|G|O|
The characters are placeholders for the correspondingly keys of selections from the key tables.
1064|-| H |-|A|B|C|N|-|D|-|E|G|O| = Type
Type Configuration
key
protection class II B
protection class I X
1064|-|H|-| A |B|C|N|-|D|-|E|G|O| = Terminals
Terminal L Configuration
key
short solder terminal (L = 4.8 mm)
2
long solder terminal (L = 8.5 mm)
3
Blade terminal (4.8 x 0.8 mm)
8
Blade terminal (6.3 x 0.8 mm)
9
connection to fuse holder B
1064|-|H|-|A| B |C|N|-|D|-|E|G|O| = Terminals
Terminal N Configuration
key
short solder terminal (L = 4.8 mm) 2
long solder terminal (L = 8.5 mm) 3
Blade terminal (4.8 x 0.8 mm) 8
Blade terminal (6.3 x 0.8 mm) 9
connection to fuse holder B
Symbols similar as in table A
1064|-|H|-|A|B| C |N|-|D|-|E|G|O| = Terminals
Terminal Ground Configuration
key
without terminal 0
short solder terminal (L = 4.8 mm) 2
long solder terminal (L = 8.5 mm) 3
Blade terminal (4.8 x 0.8 mm) 8
Blade terminal (6.3 x 0.8 mm) 9
Symbols similar as in table A
1064|-|H|-|A|B|C| N |-|D|-|E|G|O| = Terminal Fuseholder
Terminal Fuseholder Configuration
key
solder terminal 1
1064|-|H|-|A|B|C|N|-| D |-|E|G|O| = Color
Color Configuration
key
Black A
Grey B
White D
1064|-|H|-|A|B|C|N|-|D|-| E |G|O| = Style
Style Configuration
key
snap-in standard type 3
1064|-|H|-|A|B|C|N|-|D|-|E| G |O| = DimensionS
Dimension "S" Configuration
key
00
The dimension "S" is displayed in (1/10 mm). This information is also valid for the
order code
4
Power entry modules without line filter
1064 https://www.schurter.com /PG05
Connectors
1064|-|H|-|A|B|C|N|-|D|-|E|G| O | = Features
Features Configuration
key
dead cover 1
Features Configuration
key
holder for 1 or 2 fuses (text legible, when inlet on top) 4
holder for 1 or 2 fuses (text legible, when inlet on bottom) 5
All Variants
Type Terminal L Terminal N Terminal Ground Color Style Features Config. Code Order Number
protection class I connection to
fuse holder
short solder
terminal (L = 4.8
mm)
short solder
terminal (L = 4.8
mm)
Black snap-in standard
type
holder for 1 or 2
fuses (text legi-
ble, when inlet
on top)
1064-X-B221-A-3004 4304.6025
protection class I connection to
fuse holder
Blade terminal
(4.8 x 0.8 mm)
Blade terminal
(4.8 x 0.8 mm)
Black snap-in standard
type
holder for 1 or 2
fuses (text legi-
ble, when inlet
on top)
1064-X-B881-A-3004 4304.6026
protection class I connection to
fuse holder
Blade terminal
(6.3 x 0.8 mm)
Blade terminal
(6.3 x 0.8 mm)
Black snap-in standard
type
holder for 1 or 2
fuses (text legi-
ble, when inlet
on top)
1064-X-B991-A-3004 4304.6027
protection class I connection to
fuse holder
connection to
fuse holder
short solder
terminal (L = 4.8
mm)
Black snap-in standard
type
holder for 1 or 2
fuses (text legi-
ble, when inlet
on top)
1064-X-BB21-A-3004 4304.6028
protection class I connection to
fuse holder
connection to
fuse holder
short solder
terminal (L = 4.8
mm)
Black snap-in standard
type
holder for 1 or 2
fuses (text legi-
ble, when inlet
on bottom)
1064-X-BB21-A-3005 4304.6029
protection class I connection to
fuse holder
connection to
fuse holder
Blade terminal
(4.8 x 0.8 mm)
Black snap-in standard
type
holder for 1 or 2
fuses (text legi-
ble, when inlet
on top)
1064-X-BB81-A-3004 4304.6030
protection class I connection to
fuse holder
connection to
fuse holder
Blade terminal
(6.3 x 0.8 mm)
Black snap-in standard
type
holder for 1 or 2
fuses (text legi-
ble, when inlet
on top)
1064-X-BB91-A-3004 4304.6031
protection class I connection to
fuse holder
connection to
fuse holder
short solder
terminal (L = 4.8
mm)
White snap-in standard
type
holder for 1 or 2
fuses (text legi-
ble, when inlet
on top)
1064-X-BB21-D-3004 4304.6129
The listet variants should be available from stock Other versions on request www.schurter.com/contact
Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
Packaging unit 50 Pcs
Accessories
Description
Assorted Covers
Rear Cover
5
Power entry modules without line filter 1064
https://www.schurter.com /PG05
Connectors
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787
IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091
Appliance Outlet further types to 1064
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782
4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06
4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012
Connector further types to 1064 ...
Mating Outlets/Connectors shuttered
Power Cord Overview complete
Power cord with IEC connector C17, V-Lock, straight VAC17KS
Power Cord further types to 1064
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
01.12.2017
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Schurter:
4304.6022 4304.6023 4304.6024 4304.6025 4304.6026 4304.6027 4304.6028 4304.6029 4304.6031 4304.6032
4304.603 4304.6030