VS-30BQ060-M3 Vishay Semiconductors Schottky Rectifier, 3.0 A FEATURES * Low forward voltage drop Cathode * Guard ring for enhanced ruggedness and long term reliability Anode * Halogen-free according to IEC 61249-2-21 definition SMC * Small foot print, surface mountable * High frequency operation PRODUCT SUMMARY * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C Package SMC IF(AV) 3.0 A VR 60 V VF at IF 0.52 V IRM 20 mA at 125 C TJ max. 150 C Diode variation Single die EAS 5.0 mJ * Compliant to RoHS directive 2002/95/EC DESCRIPTION The VS-30BQ060-M3 surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) VALUES UNITS 3.0 A 60 V Rectangular waveform VRRM IFSM tp = 5 s sine 1200 A VF 3.0 Apk, TJ = 125 C 0.52 V TJ Range - 55 to 150 C VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VS-30BQ060-M3 UNITS 60 V VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average forward current IF(AV) TEST CONDITIONS VALUES 50 % duty cycle at TL = 123 C, rectangular waveform 3.0 50 % duty cycle at TL = 113 C, rectangular waveform 4.0 UNITS A Maximum peak one cycle non-repetitive surge current at TC = 25 C IFSM Non-repetitive avalanche energy EAS TJ = 25 C, IAS = 1.0 A, L = 10 mH 5.0 mJ Repetitive avalanche current IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A Document Number: 93330 Revision: 13-Sep-10 5 s sine or 3 s rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com 1200 130 www.vishay.com 1 VS-30BQ060-M3 Schottky Rectifier, 3.0 A Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 3A Maximum forward voltage drop VFM (1) TJ = 25 C 6A 3A TJ = 125 C 6A TJ = 25 C VR = Rated VR VALUES UNITS 0.58 0.76 V 0.52 0.66 0.5 mA Maximum reverse leakage current IRM Maximum junction capacitance CT VR = 5 VDC (test signal range 100 kHz to1 MHz), 25 C 180 pF Typical series inductance LS Measured lead to lead 5 mm from package body 3.0 nH 10 000 V/s VALUES UNITS - 55 to 150 C Maximum voltage rate of change dV/dt TJ = 125 C Rated VR 20 Note (1) Pulse width = 300 s, duty cycle = 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction temperature range TJ (1) Maximum storage temperature range TStg Maximum thermal resistance, junction to lead RthJL (2) Maximum thermal resistance, junction to ambient RthJA TEST CONDITIONS 12 DC operation 0.24 Approximate weight Marking device C/W 46 g 0.008 Case style SMC (similar to DO-214AB) oz. 3H Notes (1) (2) dP tot 1 ------------- < -------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Mounted 1" square PCB www.vishay.com 2 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 93330 Revision: 13-Sep-10 VS-30BQ060-M3 1 0.1 0.1 Vishay Semiconductors 100 10 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) Schottky Rectifier, 3.0 A TJ = 150 C TJ = 125 C TJ = 25 C TJ = 150 C 10 TJ = 125 C 1 TJ = 100 C TJ = 75 C 0.1 TJ = 50 C TJ = 25 C 0.01 0.001 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 0.9 10 20 30 50 40 60 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 TJ = 25 C 100 10 0 10 20 30 50 40 60 70 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 100 10 PDM 1 t1 0.1 0.01 0.00001 Single pulse thermal resistance) 0.0001 0.001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.01 t2 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 93330 Revision: 13-Sep-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 VS-30BQ060-M3 Schottky Rectifier, 3.0 A 2.5 160 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 150 140 Average Power Loss (W) Allowable Lead Temperature (C) Vishay Semiconductors DC 130 120 80 % Square wave (D = 0.50) 110 100 90 80 2.0 1.5 RMS limit 1.0 DC 0.5 See note (1) 0 70 0 1 2 3 0 5 4 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 IF(AV) - Average Power Current (A) Fig. 5 - Maximum Average Forward Current vs. Allowable Lead Temperature Fig. 6 - Maximum Average Forward Dissipation vs. Average Forward Current IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 Tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Peak Surge Forward Current vs. Pulse Duration Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR www.vishay.com 4 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Document Number: 93330 Revision: 13-Sep-10 VS-30BQ060-M3 Schottky Rectifier, 3.0 A Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 30 B Q 060 -M3 1 2 3 4 5 6 1 - Vishay Semiconductors product suffix 2 - Current rating 3 - B = SMC 4 - Q = Schottky "Q" series 5 - Voltage rating (060 = 60 V) 6 - Environmental digit: -M3 = Halogen-free, RoHS compliant and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N VS-30BQ060-M3/9AT PREFERRED PACKAGE CODE MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION 9AT 3500 13" diameter plastic tape and reel LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95402 Part marking information www.vishay.com/doc?95403 Packaging information www.vishay.com/doc?95404 Document Number: 93330 Revision: 13-Sep-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 5 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-30BQ060-M3/9AT