ZR431FTA - DIODES INC - Datasheet.Live

ZR431

ADJUSTABLE PRECISION ZENER SHUNT REGULATOR

ZR431

Document number: DS33255 Rev. 6 - 2 1 of 9

www.diodes.com October 2011

ADVANCE INFORMATION

Description

The ZR431 is a three terminal adjustable shunt regulator

offering excellent temperature stability and output current

handling capa bility up to 100mA. The outp ut voltage may be

set to any chosen voltage between 2.5 and 20 volts by

selection of two external divider resistors.

The devices can be used as a replacement for zener diode s

in many applications requiring an improvement in zener

performance.

Features

• Surface mount SOT223 and SOT23 packages

• 2%, 1 % and 0.5% tolerance

• Max. temperature coefficient 55 ppm/°C

• Temperature compensated for operation

• over the full temperature range

• Programmable output voltage

• 50μA to 100mA current sink capabil ity

• Low output noise

• All package options available in “Green” Molding

Compound (No Br, Sb) and Lead Free Finish/ RoHS

Compliant (Note 1)

Pin Assignments

Applications

• Shunt regulator

• Series regulator

• Voltage monitor

• Over voltage/ under voltage protection

• Switch mode power supplies

Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at

http://www.diodes.com/products/lead_free.html.

Typical Application Circuit



+

V

REF

V

Z

GND

V

REF

V

Z

1

3

2

SOT23

(Top View)

1

2

3

4

V

Z

GND

V

REF

GND

SOT223

Pin 4 floating or

connected to pin 2

(Top View

)

ZR431

ADJUSTABLE PRECISION ZENER SHUNT REGULATOR

ZR431

Document number: DS33255 Rev. 6 - 2 2 of 9

www.diodes.com October 2011

ADVANCE INFORMATION

Absolute Maximum Ratings (Note 2)

Symbol Parameter Rating Unit

VZ Cathode Voltage 20 V

IZ Cathode Current 150 mA

TA Operating Temperature -40 to +85 °C

TST Storage Temperature -55 to +125 °C

PD Power Dissipation (Notes 3, 4) SOT23 330 mW

SOT223 2 W

Notes: 2. Operation above the absolute maximum rating may cause device failure. Operation at the absolute maximum ratings, for extended periods, may

reduce device reliability. Unless otherwise stated voltages specified are relative to the ANODE pin.

3. TJ, max =150°C.

4. Ratings apply to ambient temperature at 25°C.

Recommended Operating Conditions (TA = 25°C)

Symbol Parameter Min Max Unit

VZ Cathode Voltage VREF 20 V

IZ Cathode Current 0.05 100 mA

Electrical Characteristics (TA = 25°C unless other wise specified )

Symbol Parameter Test Conditions Min Typ. Max Unit

VREF Reference voltage (Note 5) 2%

1 %

0.5% IL = 10mA (Fig 1), VZ = VREF 2.45

2.475

2.487

2.50

2.55

2.525

2.513 V

VDEV Deviation of reference inp ut voltage

over temperature IL = 10mA, VZ = VREF

TA = Full range (Fig 1) 8.0 17 mV

ΔVREF

ΔVZ

Ratio of the change in reference

voltage to the change in cathode

voltage

VZ from VREF to 10V

IZ = 10mA (fig 2) -1.85 -2.7

mV/V

VZ from 10V to 20V

IZ = 10mA (Fig 2) -1.0 -2.0

IREF Reference input current R1 = 10k, R2 = O/C, IL = 10mA (Fig 2) 0.12 1.0 μA

ΔIREF Deviation of reference input current

over temperature R1 = 10k, R2 = O/C, IL = 10mA

TA = Full range (Fig 2) 0.04 0.2 μA

IZ(MIN) Minimum cathode current for

regulation VZ = VREF (Fig 1) 35 50 µA

IZ(OFF) Off-state current VZ = 20V, VREF = 0V (Fig 3) 0.1 μA

RZ Dynamic output impedance VZ = VREF (Fig 1), f = 0Hz 0.75

Ω

Note 5: 0.5% and 1% SOT23 only

For definitions of reference voltage temperature coefficient and dynamic output impedance see NOTES following DC TEST CIRCUITS

ZR431

ADJUSTABLE PRECISION ZENER SHUNT REGULATOR

ZR431

Document number: DS33255 Rev. 6 - 2 3 of 9

www.diodes.com October 2011

ADVANCE INFORMATION

DC Test Circuits

Fig. 1 Test Circuit for VZ = VREF

Fig. 2 Test Circuit for VZ > VREF

Fig.3 Test Circuit for Off State Current

Deviation of reference input voltage, VDEV, is defined as the maximum variation of the reference input voltage over the full

temperature range.

The average temperature coefficient of the reference input voltage, VREF is defin ed as:

)2T1T(V 1000000V

)C/ppm(V ref

dev

o

ref −

×

=

The dynamic output impedan c e, RZ is defined as:

z

zI

V

RΔ

Δ

=

When the device is program med with two external resistors,

R1 and R2, (Fig 2), the dynamic output impedance of the

overall circuit, R’, is defined as:

)

2R1R

1(RR z+=

′

Input

I

L

I

REF

I

Z

V

Z

V

REF

Input

I

L

I

REF

I

Z

V

Z

V

REF

R1

R2

Input

I

ZOFF

V

Z

T1 T2Temperature

V = V - V

DEV MAX MIN

V

MAX

V

MIN

ZR431

ADJUSTABLE PRECISION ZENER SHUNT REGULATOR

ZR431

Document number: DS33255 Rev. 6 - 2 4 of 9

www.diodes.com October 2011

ADVANCE INFORMATION

Typical Characteristics

-40 -20 020 40 60 80

TEMP ERATURE (°C)

Ref erence C urr ent vs. Temper a ture

160

140

130

120

110

100

R

E

F

E

R

E

N

C

E

C

U

R

E

N

T

(nA)

V = V

I = 10mA

REF

Z

0

CATHODE VOLTAGE (V)

Ch ange in V vs. C at h ode Volt age

REF

5101520

-10

-5

-15

-20

-25

CHANGE in REFERENCE OUTPUT

VOLTAGE (mV)

I = 10mA

Z

-40 -20 020 40 60 80

TEMP ERATU RE ( °C)

Cat hode Cur r ent vs. Tem peratu r e

24

26

28

30

32

34

36

38

M

I

N

I

M

U

M

C

A

T

H

O

D

E

C

U

R

E

N

T

(µA)

V = V

REF Z

100 F REQUENCY (Hz)

Dynamic Im pedance vs. Fre quency

1k 10k 100k 1M

0.1

1.0

10

100

DYNAMIC IMPEDANCE ( )

Ω

2.506

2.504

2.502

2.500

2.498

2.496

2.494

2.492

2.490

-40 -20 020 40 60 80

TEMPERATURE (°C)

Ref erence Volt age vs. Tem perature

R

EFE

R

EN CE V

O

LTA

G

E (V)

I = 10mA

Z

25 50 75 85 100

AMBIENT TEMPERATURE ( C)

Power Dissipation Derating

°

2.0

0

1.0

SOT223

SOT23

P

O

WE

R

DISSI

P

A

T

I

O

N (W)

ZR431

ADJUSTABLE PRECISION ZENER SHUNT REGULATOR

ZR431

Document number: DS33255 Rev. 6 - 2 5 of 9

www.diodes.com October 2011

ADVANCE INFORMATION

Typical Characteristics (cont.)

IZ = 10mA, TA = 25°C

Test Circuit for Open Loop Voltage Gain

TA = 25°C

Test Circuit for Pulse Response

VREF < VZ < 20, IZ = 10mA, TA = 25°C

Test Circuit for Stability Boundary Conditions

100 1k 10k 100k 1M

FREQUENCY (Hz)

Gai n vs. Frequency

0

20

40

60

O

P

EN L

O

P

V

O

L

T

A

G

E

G

AIN (dB)

0 0.2 0.4 0.6 0.8 1.0

TIME (µs)

Puls e Resp on se

0

5.0

1.0

2.0

3.0

V

O

L

T

A

G

E SWI

N

G

(V)

Repetitive Pulse

Single Pulse V

Z

INPUT

10p 100p 1000p 0.01µ 0.1µ 1µ

LOAD CAP ACITANCE (F)

St ability Boundary Conditions

0

20

40

60

80

100

C

A

T

H

O

DE

C

U

R

E

N

T

(mA)

STABLE STABLE

V

Z

230

I

Z

15k

9µF

8k25

+

-

220 V

Z

50

Input Monitor

Pulse

Generator

Input 150

I

Z

10k

V

Z

ZR431

ADJUSTABLE PRECISION ZENER SHUNT REGULATOR

ZR431

Document number: DS33255 Rev. 6 - 2 6 of 9

www.diodes.com October 2011

ADVANCE INFORMATION

Application Characteristics

VREF

2R1R

1

VOUT ⎟

⎠

⎞

⎜

⎝

⎛+=

SHUNT REGULATOR

VREF

2R1R

1

VOUT ⎟

⎠

⎞

⎜

⎝

⎛+=

HIGHER CURRENT SHUNT REGULATOR

VOUT(MIN) = VREF + VREG

VREF

2R1R

1

VOUT ⎟

⎠

⎞

⎜

⎝

⎛+=

OUTPUT CONTROL OF A THREE TERMINAL

FIXED REGULATOR

VREF

2R1R

1

VOUT ⎟

⎠

⎞

⎜

⎝

⎛+=

SERIES REGULATOR

SINGLE SUPPLY COMPARATOR WITH

TEMPERATURE COMPENSATED THRESHOLD

VREF

B2R B1R

1itlimLow ⎟

⎠

⎞

⎜

⎝

⎛++

VREF

A2R A1R

1itlimHigh ⎟

⎠

⎞

⎜

⎝

⎛++

OVER VOLTAGE/UNDER VOLTAGE

PROTECTION CIRCUIT

V+ V

OUT

V

REF

R1

R2

ZSR***

Common

IN OUT

V+

V

REF

V

OUT

R2

R1

30

Ω

0.01µF

V+ V

OUT

V

REF

R1

R2

V+ V

OUT

R1

R2

V

REF

V+

INPUT

V = 2.5V

TH

OUTPUT

V = V+

OFF

V 2V

ON

≈

V+

V

REF

OUTPUT

V

REF

R1A R1B

R2A R2B

ZR431

ADJUSTABLE PRECISION ZENER SHUNT REGULATOR

ZR431

Document number: DS33255 Rev. 6 - 2 7 of 9

www.diodes.com October 2011

ADVANCE INFORMATION

Ordering Information

Device Tolerance Package

Code Part Mark Packaging 7” Tape and Reel

Quantity Part Number

Suffix

ZR431F005-7 0.5% F 43R SOT23 3000/Tape & Reel -7

ZR431F005TA 0.5% F 43R SOT23 3000/Tape & Reel TA

ZR431F01-7 1% F 43B SOT23 3000/Tape & Reel -7

ZR431F01TA 1% F 43B SOT23 3000/Tape & Reel TA

ZR431FTA 2% F 43A SOT23 3000/Tape & Reel TA

ZR431GTA 2% G ZR431 SOT223 1000/Tape & Reel TA

Tolerance Packing

-7: Tape & Reel

TA : Tape & Reel

ZR431

X

XXX XX

005 : 0.5%

0.1 : 1%

Blank : 2%

Package

F : SOT23

G : SOT223

ZR431

ADJUSTABLE PRECISION ZENER SHUNT REGULATOR

ZR431

Document number: DS33255 Rev. 6 - 2 8 of 9

www.diodes.com October 2011

ADVANCE INFORMATION

Package Outline Dimensions (All Dimensions in mm)

(1) Package Type: SOT23

(2) Package Type: SOT223

SOT23

Dim Min Max Typ

A 0.37 0.51 0.40

B 1.20 1.40 1.30

C 2.30 2.50 2.40

D 0.89 1.03 0.915

F 0.45 0.60 0.535

G 1.78 2.05 1.83

H 2.80 3.00 2.90

J 0.013 0.10 0.05

K 0.903 1.10 1.00

K1 - - 0.400

L 0.45 0.61 0.55

M 0.085 0.18 0.11

α 0° 8° -

All Dimensions in mm

SOT223

Dim Min Max Typ

A 1.55 1.65 1.60

A1 0.010 0.15 0.05

b1 2.90 3.10 3.00

b2 0.60 0.80 0.70

C 0.20 0.30 0.25

D 6.45 6.55 6.50

E 3.45 3.55 3.50

E1 6.90 7.10 7.00

e — — 4.60

e1 — — 2.30

L 0.85 1.05 0.95

Q 0.84 0.94 0.89

All Dimensions in mm

A

M

JL

D

F

BC

H

K

G

K1

A1

A

ZR431

ADJUSTABLE PRECISION ZENER SHUNT REGULATOR

ZR431

Document number: DS33255 Rev. 6 - 2 9 of 9

www.diodes.com October 2011

ADVANCE INFORMATION

IMPORT ANT NOTI CE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS

DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE (A ND THEIR EQUIVA LENT S UNDE R THE LAWS OF ANY JURISDICTION).

Diodes Incorporat ed and its subsidiaries reserve t he right to make modific ations, enhancements, improvements, corrections or ot her

changes without furt her notice to this document and any product descri bed herein. Diodes Inc orporated does not assume any liability

arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any

license under its patent or trademark rights, nor t he rights of others. Any Custom er or us er of this document or products desc ribed

herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies

whose products are repres ented on Diodes Incorporated website, harmless against all damages.

Diodes Incorporat ed does not warrant or acc ept any liabil ity whatsoever in re spect of any product s purchased through unauthori zed

sales c hannel.

Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall

indemnify and hold Diodes Incorporated and its representatives harml ess against all claims, damages, expenses, and attorney fees

arising out of, directly or indirectly, any c l aim of personal inj ury or death ass ociated with such unintended or unauthorized application.

Products desc ribed herein may be covered by one or more Unit ed S tates, international or foreign patents pendi ng. Product names

and markings noted herein may also be covered by one or more United States, international or foreign trademarks.

LIFE SUPPORT

Diodes Incorporat ed products are specifical ly not authorized for use as critical components in life support devices or systems without

the express written app roval of t he Chief Executive Off icer of Diodes Incorporated. As used herein:

A. Life support device s or syst ems are devices or systems which:

1. are intended to impl ant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with i nst ructions for use provided

in the labeling can be reasonably expected to result in significant injury t o t he user.

B. A critical com ponent is any component in a life support device or syst em whose failure to perform can be reasonably expected

to cause the failure of t he life support devi ce or to affect its safety or effecti veness.

Customers represent t hat t hey have all necessary expertise in the safety and regulatory ramifications of their life support devices or

systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements

concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,

notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,

Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes

Incorporat ed products in such safety-cri t ic al, l ife support devices or systems.

www.diodes.com