1206USB-113MBD - Coilcraft, Inc.

USB 2.0 Common Mode Filter

–

1206

Document 386-1

Specifications subject to change without notice. Document 386-1 Revised 08/20/04

These Coilcraft filters are designed to eliminate virtually

all common mode noise in high-speed, differential mode

signal transmission applications such as USB 2.0,

IEEE1394 and LVDS. Most provide greater than 30 dB

common mode attenuation and greater than 100 ohms

impedance.

These dual-wound filters have an industry standard

footprint and feature lower DC resistance and greater

current handling capability than our 0805USB filter.

They are available in nine values to meet your specific

requirements.

Coilcraft Designer’s Kit C184 contains samples of all

values shown here plus all values in our 0603USB and

0805USB series. To order, contact Coilcraft or purchase

online at http://order.coilcraft.com.

Common mode Common mode

impedance typ (Ohms) attenuation typ (dB) Inductance2DCR max Isolation Irms3

Part number110 MHz 100 MHz 500 MHz 10 MHz 100 MHz 500 MHz min (nH) (Ohms) Vrms (mA)

1206USB-371MB_ 15 37 95 1.0 2.1 12.0 31 0.10 250 1000

1206USB-102MB_ 30 100 200 1.5 4.2 19.0 66 0.14 250 850

1206USB-172MB_ 55 170 345 2.3 6.8 26.0 107 0.18 250 700

1206USB-262MB_ 85 265 545 3.0 9.7 31.0 161 0.22 250 600

1206USB-372MB_ 125 370 775 4.7 12.0 33.0 226 0.26 250 600

1206USB-532MB_ 170 530 1190 5.5 15.0 35.0 319 0.30 250 600

1206USB-672MB_ 200 670 1500 7.3 16.5 33.0 412 0.34 250 500

1206USB-872MB_ 265 870 2010 9.1 18.0 32.0 510 0.39 250 500

1206USB-113MB_ 330 1100 2425 10.2 21.0 31.0 623 0.44 250 500

1. When ordering, please specify packaging code:

1206USB-113MBC

Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic

tape (2000 parts per full reel).

B= Less than full reel. In tape, but not machine ready.

To have a leader and trailer added ($25 charge),

use code letter C instead.

D=13″ machine-ready reel. EIA-481 embossed

plastic tape (7500 parts per full reel).

2. Inductance measured at 100 MHz using an Agilent/HP 4286A

impedance analyzer and a Coilcraft SMD-A fixture.

3. Average current for a 20°C rise from 25°C ambient.

4. DCR and Irms are specified per winding.

5. Operating temperature range −40°C to 85°C.

6. Electrical specifications at 25°C.

Tape and reel: 2000/7″ reel; 7500/13″ reel 8 mm tape width

For packaging data see Tape and Reel Specifications section.

0.072

1,83

±0.004

±0,10

0.063

1,60

±0.004

±0,10

0.024

0,61

0.048

1,22

0.070

1,78

0.060

1,52

0.028

0,71

0.024

0,61

0.015

0,38

0.006

0,15

Recommended

Land Pattern

0.126 ±0.004

3,20 ±0,10