MC 1% Series Thick Film Chip Resistors Features: * * * Small size and light weight. Suitable for both flow and re-flow soldering. Reduction of assembly costs and matching with placement machines. Performance Specifications: Temperature coefficient Short-time overload Insulation resistance Dielectric withstanding voltage Terminal bending Soldering heat Minimum solderability Temperature cycling Humidity (Steady State) Load life in humidity Load life : 5%: 1 ~ 10 400PPM/C; 11 ~ 10M 200PPM/C 1%: 10 ~ 100 200PPM/C; 101 ~ 1M 100PPM/C. : 5%: (2.0% +0.1) Maximum 1%: (1.0% +0.1) Maximum. : 1000 MegaOhm. : No evidence of flashover, mechanical damage, arcing or insulation breakdown. : (1.0% +0.05) Maximum . : Resistance change rate is (1.0% + 0.05) Maximum. : 95% coverage. : 5%: (1.0% +0.05) Maximum 1%: (0.5% +0.05) Maximum. : 5%: (3.0% +0.1) Maximum : 1%: (0.5% +0.1) Maximum. : 5%: (3.0% +0.1) Maximum 1%: (1.0% +0.1) Maximum. : 5%: (3.0% +0.1) Maximum 1%: (1.0% +0.1) Maximum. * The values which are not of standard E-24 series (2% & 5%) and not of E-96 series (1%) could be offered on a case to case basis. Specification Table Series MC 0603 MC 0805 MC 1206 Power Rating at 70C (W) 1/16 1/10 1/8 Maximum Working Voltage (V) Maximum Overload Voltage (V) 1A 2A Operating Temperature (C) -55 - +155 Tolerance (%) Resistance Range Jumper <50m 1 2 5 10 - 1M 1 - 10M 1 - 10M 50 100 2A 4A Jumper <50m 150 300 1 2 5 10 - 1M 1 - 10M 1 - 10M 2A 4A Jumper <50m 1 2 5 10 - 1M 1 - 10M 1 - 10M 200 400 Page 1 -55 - +155 -55 - +155 Standard Series E96 E24 E24 E96 E24 E24 E96 E24 E24 08/05/06 V1.0 MC 1% Series Thick Film Chip Resistors Construction: Power Rating and Dimension: L L1 L1 W W H L2 L2 H Dimension Series Length (L) Width (W ) +0.15 -0.10 Height (H) 0.10 Length (L1) 0.20 Length (L2) 0.20 MC 0603 1.6 0.10 0.80 0.45 0.30 0.30 MC 0805 2.0 0.15 1.25 0.40 0.40 MC 1206 3.10 0.15 1.60 0.45 0.45 0.55 Dimensions : Millimetres Derating Curve Page 2 08/05/06 V1.0 MC 1% Series Thick Film Chip Resistors Marking on the Resistors Body * 1% tolerance marking of case size 0805 and bigger is 4 digits, the first 3 digits are the significant figures of the resistance and the 4th digit denotes number of zeros. 2372 = 23700 = 23.7K; 1430 = 143 Below 10 shown as this: 3R24 = 3.24 3R24 2372 * Standard E-96 series values (1% tolerance) of 0603 size. Due to the small size of the resistor's body, 3 digits marking will be used to indicate the accurate resistance value by using the Multiplier code. 1.96K. = 196 x 101 = 29B 12.4. = 124 x 10-1 = 10X 10X 29B * Standard E-24 series values which does not belong to E-96 series values (in 1% tolerance) of 0603 size. The marking is the same as 5% tolerance but marked with underline. 122 = 1200 = 1.2k. 680 = 68. 122 680 Page 3 08/05/06 V1.0 MC 1% Series Thick Film Chip Resistors Resistance Preferred Value Range E6 10 E12 10 E24 10 11 E96 10.0 E6 E12 E24 E96 21.5 E6 E12 E24 E96 46.4 10.2 22 22 22 22.1 47 47 47 47.5 10.5 22.6 10.7 23.2 11.0 23.7 24 12 52.3 24.9 53.6 11.8 25.5 12.1 26.1 27 12.7 27 15 15 33 20 68.1 71.5 34.8 73.2 75 75.0 35.7 76.8 36.5 78.7 17.4 37.4 17.8 38.3 80.6 82 82 82.5 39.2 84.5 18.7 40.2 86.6 19.1 41.2 19.6 42.2 18.2 39 68 69.8 34.0 39 68 32.4 15.8 36 66.5 68 33.2 16.2 16.9 18 64.9 31.6 16.5 18 63.4 30.9 33 61.9 29.4 14.7 33 60.4 62 30.1 14.3 15.4 16 59.0 28.7 15.0 56.2 57.6 28.0 30 56 27.7 13.3 14.0 54.9 56 27.4 13.0 13.7 15 51.1 24.3 12.4 13 49.9 51 11.5 11.3 12 48.7 90.9 43.2 93.1 20.5 44.2 95.3 21.0 45.3 97.6 20.0 43 88.7 91 Above values in accordance with IEC Publication 63 (1963) and BS2488 Page 4 08/05/06 V1.0 MC 1% Series Thick Film Chip Resistors Multiplier Code (for 0603 1% Marking) Code A B C D E F G H X Y Z Multiplier 10 0 10 1 10 2 10 3 10 4 10 5 10 6 10 7 10 -1 10 -2 10 -3 Standard E-96 Series Resistance Value Code (for 0603 1% Marking) Value Code Value Code Value Code Value Code Value Code 100 01 162 21 261 41 422 61 681 81 102 02 165 22 267 42 105 03 169 23 274 43 432 62 698 82 442 63 715 83 107 04 174 24 280 110 05 178 25 287 44 453 64 732 84 45 464 65 750 85 113 06 182 26 115 07 187 27 294 46 475 66 768 86 301 47 487 67 787 87 118 08 191 121 09 196 28 309 48 499 68 806 88 29 316 49 511 69 825 89 124 10 127 11 200 30 324 50 523 70 845 90 205 31 332 51 536 71 866 91 130 133 12 210 32 340 52 549 72 887 92 13 215 33 348 53 562 73 909 93 137 14 221 34 357 54 576 74 931 94 140 15 226 35 365 55 590 75 953 95 143 16 232 36 374 56 604 76 976 96 147 17 237 37 383 57 619 77 - - 150 18 243 38 392 58 634 78 - - 154 19 249 39 402 59 649 79 - - 158 20 255 40 412 60 665 80 - - Page 5 08/05/06 V1.0 MC 1% Series Thick Film Chip Resistors Part Number Explanation MC 0.063W 0603 1% 100R Type Wattage Case Style Tolerance OHMIC Values Wattage : 0.063, 0.1 and 0.125W. Case Style : 0603, 0805 and 1206. Tolerance : 1%. Ohmic Value : Where R = Ohms = K = Kiloohms = K M = Megaohms = M And replaces the decimal point. eg: 1R5 = 1.5 4K7 = 4.7K 6M8 = 6.8M. Stocked Values Tolerance Wattage Preferred Value Range Range Value 1R5 - 1M 1% 0.063W E96 1% 0.1W E24 1R5 - 1M 1% 0.125W E24 10R - 1M Page 6 08/05/06 V1.0 MC 1% Series Thick Film Chip Resistors Notes: International Sales Offices: AUSTRALIA - Farnell InOne FINLAND - Farnell InOne NETHERLANDS - Farnell InOne SWITZERLAND - Farnell InOne Tel No: Tel No: Tel No: ++ 61 2 9645 8888 Fax No: ++ 61 2 9644 7898 Fax No: ++ 358 9 345 5411 Fax No: ++ 31 30 241 7333 Tel No: ++ 41 1 204 64 64 Fax No: ++ 41 1 204 64 54 AUSTRIA - Farnell InOne FRANCE - Farnell InOne NEW ZEALAND - Farnell InOne UK - Farnell InOne Tel No: Tel No: Tel No: Tel No: ++ 43 662 2180 680 ++ 358 9 560 7780 ++ 33 474 68 99 99 ++ 31 30 241 7373 ++ 64 9 357 0646 ++ 44 8701 200 200 Fax No: ++ 43 662 2180 670 Fax No: ++ 33 474 68 99 90 Fax No: ++ 64 9 357 0656 Fax No: ++ 44 8701 200 201 BELGIUM - Farnell InOne GERMANY - Farnell InOne NORWAY - Farnell InOne UK - BuckHickman InOne Tel No: Tel No: Tel No: ++ 45 44 53 66 66 ++ 44 8450 510 150 ++ 32 3 475 2810 ++ 49 89 61 39 39 39 Fax No: ++ 32 3 227 3648 Fax No: ++ 49 89 613 59 01 Fax No: ++ 45 44 53 66 02 ++ 44 8450 510 130 BRAZIL - Farnell-Newark InOne HONG KONG - Farnell-Newark InOne Tel No: ++ 852 2268 9888 PORTUGAL - Farnell InOne UK - CPC ++ 55 11 4066 9400 Tel No: ++ 34 93 475 8804 ++ 44 8701 202 530 Fax No: ++ 55 11 4066 9410 Fax No: ++ 852 2268 9899 Fax No: ++ 34 93 474 5288 ++ 44 8701 202 531 CHINA - Farnell-Newark InOne IRELAND - Farnell InOne SINGAPORE - Tel No: Tel No: Tel No: ++86 10 6238 5152 Fax No: ++86 10 6238 5022 Farnell-Newark InOne Tel No: ++ 65 6788 0200 ++ 353 1 830 9277 Fax No: ++ 353 1 830 9016 Fax No: ++ 65 6788 0300 export EXPORT - Farnell InOne Tel No: ++ 44 8701 200 208 Fax No: ++ 44 8701 200 209 For enquiries from all other markets DENMARK - Farnell InOne ITALY - Farnell InOne SPAIN - Farnell InOne Tel No: Tel No: Tel No: ++ 45 44 53 66 44 ++ 39 02 93 995 200 ++ 34 93 475 8805 Fax No: ++ 45 44 53 66 06 Fax No: ++ 39 02 93 995 300 Fax No: ++ 34 93 474 5107 ESTONIA - Farnell InOne MALAYSIA - SWEDEN - Farnell InOne http://www.farnellinone.com Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 Farnell-Newark InOne Tel No: ++ 60 3 7873 8000 Fax No: ++ 60 3 7873 7000 Tel No: ++ 46 8 730 50 00 Fax No: ++ 46 8 83 52 62 http://www.buckhickmaninone.com http://www.cpc.co.uk Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2004. Page 7 08/05/06 V1.0