VEC2315 Ordering number : EN8699 SANYO Semiconductors DATA SHEET P-Channel Silicon MOSFETs VEC2315 General-Purpose Switching Device Applications Features * * * * * ON-resistance RDS(on)1=105m(typ.) 4V drive High-density mounting Protection diode in Halogen free compliance Specifications Absolute Maximum Ratings at Ta=25C Parameter Symbol Drain-to-Source Voltage Conditions Ratings Unit VDSS VGSS Gate-to-Source Voltage Drain Current (DC) ID IDP Drain Current (Pulse) Allowable Power Dissipation --60 V 20 V --2.5 A PW10s, duty cycle1% --10 A When mounted on ceramic substrate (900mm2x0.8mm) 1unit 0.9 W Total Dissipation PD PT 1.0 W Channel Temperature Tch 150 C Storage Temperature Tstg --55 to +150 C When mounted on ceramic substrate (900mm2x0.8mm) Product & Package Information unit : mm (typ) 7012-002 * Package : VEC8 * JEITA, JEDEC :* Minimum Packing Quantity : 3,000 pcs./reel 0.3 8 7 0.15 Packing Type : TL 6 5 Marking 2.3 UM Lot No. 2 3 TL 4 0.65 2.9 0.75 1 0.07 0.25 2.8 0.25 Package Dimensions 1 : Source1 2 : Gate1 3 : Source2 4 : Gate2 5 : Drain2 6 : Drain2 7 : Drain1 8 : Drain1 Electrical Connection 8 7 6 5 1 2 3 4 SANYO : VEC8 http://semicon.sanyo.com/en/network 30712PA TKIM TC-00002731 No.8699-1/4 VEC2315 Electrical Characteristics at Ta=25C Parameter Symbol Drain-to-Source Breakdown Voltage V(BR)DSS IDSS Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Forward Transfer Admittance IGSS VGS(off) | yfs | Static Drain-to-Source On-State Resistance RDS(on)1 RDS(on)2 Cutoff Voltage RDS(on)3 Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Ratings Conditions min ID=--1mA, VGS=0V VDS=--60V, VGS=0V VGS=16V, VDS=0V --60 VDS=--10V, ID=--1mA VDS=--10V, ID=--1.5A --1.2 typ Unit max V --1 A 10 A --2.6 V 3.9 ID=--1.5A, VGS=--10V ID=--0.75A, VGS=--4.5V ID=--0.75A, VGS=--4V S 105 137 m 128 180 m 138 194 m 420 pF 54 pF Crss 44 pF Turn-ON Delay Time td(on) 6.4 ns Rise Time tr 9.8 ns Turn-OFF Delay Time 65 ns Fall Time td(off) tf Total Gate Charge Qg Gate-to-Source Charge Qgs Gate-to-Drain "Miller" Charge Qgd Diode Forward Voltage VSD VDS=--20V, f=1MHz See specified Test Circuit. VDS=--30V, VGS=--10V, ID=--2.5A 36 ns 11 nC 1.4 nC 2 IS=--2.5A, VGS=0V nC --0.83 --1.2 V Switching Time Test Circuit 0V --10V VDD= --30V VIN ID= --1.5A RL=20 VIN D PW=10s D.C.1% VOUT G VEC2315 P.G 50 ID -- VDS --4. 0V --3. 5V --3 .0V VDS= --10V --4 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Drain-to-Source Voltage, VDS -- V --0.9 --1.0 IT15911 0 25 C --1 Ta= 7 --0.5 --2 0 --0.5 --1.0 --1.5 C --1.0 --3 5C Drain Current, ID -- A 5V --4 . --1.5 V --2.5 V GS= --25 --16.0V --10 . --2.0 ID -- VGS --5 0V --6.0 V --2.5 Drain Current, ID -- A S --2.0 --2.5 Gate-to-Source Voltage, VGS -- V --3.0 --3.5 IT15912 No.8699-2/4 VEC2315 RDS(on) -- VGS 300 RDS(on) -- Ta 300 150 100 50 0 0 --2 --4 --6 --8 --10 --12 --14 Gate-to-Source Voltage, VGS -- V 2 5 2 Ta C 75 1.0 7 --20 0 C 25 5 20 40 60 80 100 120 140 3 160 IT15914 IS -- VSD 7 5 7 C -25 =- --40 Ambient Temperature, Ta -- C Source Current, IS -- A Forward Transfer Admittance, | yfs | -- S 50 3 VGS=0V --1.0 7 5 3 2 --0.1 7 5 3 2 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Drain Current, ID -- A 3 --0.01 --0.2 7 5 Ciss, Coss, Crss -- pF 7 3 2 tr td(on) 5 Ciss 3 2 100 7 5 5 Coss 3 3 Crss 2 --0.1 2 2 3 5 7 2 --1.0 3 5 Drain Current, ID -- A 7 --7 3 2 3 4 5 6 7 8 Total Gate Charge, Qg -- nC 9 10 11 IT15919 Operation in this area is limited by RDS(on). ) 2 s s C 5 0 0m 2 a= (T --1 3 2 m 10 n 3 2 --2 10 0 s io at Drain Current, ID -- A --1.0 7 5 --0.1 7 5 --3 ID= --2.5A er --4 10 op --5 IDP= --10A (PW10s) C D --6 IT15918 ASO s 1m --8 1 --10 --15 --20 --25 --30 --35 --40 --45 --50 --55 --60 2 --10 7 5 0 --5 Drain-to-Source Voltage, VDS -- V VDS= --30V ID= --2.5A --9 0 IT15917 VGS -- Qg --10 --1.2 IT15916 1000 tf 7 --1.0 f=1MHz 5 10 --0.8 Ciss, Coss, Crss -- VDS 2 td(off) 7 --0.6 Diode Forward Voltage, VSD -- V VDD= --30V VGS= --10V 100 --0.4 IT15915 SW Time -- ID 2 Switching Time, SW Time -- ns 100 10 0.1 --0.01 Gate-to-Source Voltage, VGS -- V 150 0 --60 --16 VDS= --10V 3 5A 0.7 = -I D A V, 0.75 4.0 = -= -I S D , 5 . A VG 5V = --1 --4. I = D , VGS --10.0V = VGS IT15913 | yfs | -- ID 2 200 --25 C --0.75A 200 250 25C ID= --1.5A Ta= 75C 250 Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m Ta=25C Ta=25C Single pulse When mounted on ceramic substrate (900mm2x0.8mm) 1unit --0.01 --0.01 2 3 5 7--0.1 2 3 5 7--1.0 2 3 5 7--10 2 3 Drain-to-Source Voltage, VDS -- V 5 7--100 IT15920 No.8699-3/4 VEC2315 PD -- Ta Allowable Power Dissipation, PD -- W 1.2 When mounted on ceramic substrate (900mm2x0.8mm) 1.0 0.9 0.8 To t al 0.6 di ss 1u nit ip ati on 0.4 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT15921 Note on usage : Since the VEC2315 is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of March, 2012. Specifications and information herein are subject to change without notice. PS No.8699-4/4