W005M THRU W10M SINGLE-PHASE SILICON BRIDGE Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5 Amperes Features Surge overload rating - 50 amperes peak Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique results in inexpensive product Mounting Position: Any DIM ENSIONS DIM inches mm Min. Max. Min. Max. A 0.300 0.340 7.6 8.6 B 0.180 0.220 4.6 5.6 C 1.20 - 30.5 - D 1.27 - 32.3 - E 0.180 0.220 4.6 5.6 F 0.028 0.032 0.71 0.81 Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols W005M W01M W02M W04M W06M W08M W10M Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current TA=25 I(AV) 1.5 Amps Peak forward surge current, 8.3mS single half sine-wave superimposed on rated load IFSM 50.0 Amps 12t Rating for fusing (t<8.35ms) I2t 5.0 A2t Maximum forward voltage drop per element at 1.0A peak VF 1.0 Volt IR 10.0 1.0 A mA TJ -55 to +125 TSTG -55 to +150 Maximum DC reverse current at rated DC blocking voltage per element Operating temperature range Storage temperature range TA=25 TA=100 1 RATINGS AND CHARACTERISTIC CURVES 2