Specifications
・Impedance: 50 Ω
・ Frequency range: DC to 12GHz
・
Voltage standing wave ratio (V.S.W.R.)
1
AYU1 CONNECTOR
AYU1 CONNECTOR AYU1 CONNECTOR
AYU1 CONNECTOR
Co-axial connector
Emboss Tape
AYU1 CONNECTOR
AYU1 CONNECTOR AYU1 CONNECTOR
AYU1 CONNECTOR
Co-axial connector
Emboss Tape
φ0.81
φ1.13
Harness: Both end harness assembly with harness of 5,000mm
SMA conversion adapter: AYU1-AP-PP
to network analyzer Termination
Conversion adapter
Base: AYU1-1P-02676-120
SMA conversion adapter: AYU1-AP-JJ
to network
analyzer
Termination
Conversion
adapter
±0.05
1.05 ±0.05
1
±0.05
2.2
±0.05
4
±0.05
1.9
±0.05
1
2.0
Prohibition area of PCB processing work land
1.4max.
1.4max.
1.5max.
1.3max.
1.4max.
1.4max.
1.3max.
1.3max.
1.3max.
φ0.81 (Single shield SA)
φ1.13
(Single & Double shields TA)
Cable type DC to 3GHz 3 to 6GHz 6 to 12GHz
Harness
Base
14.9
7.7
6.1
−
9.4
6.4
4.1
−
5.8
3.4
2.9
−
φ0.81 (Single shield SA)
φ1.13 (Single shield TA)
φ1.13 (Double shields TA)
Cable type 3GHz 6GHz 12GHz
Harness
Base
Note: The specified values in above tables were measured by network
analyzer as shown in the figure below.
Base
Harness assembly
This is SMT type, space saving and co-axial
connector, corresponding to notebook PC,
thinner and lighter telecommunications
apparatus, etc.
[Application]
UWB, WiMAX, Wireless LAN, Bluetooth,
DSRC, Mobile phones, PDA, GPS, Express,
etc. ・
Temperature range: - 25℃ to + 85℃
(including temperature rise in
applying electrical current)
・
Withstanding voltage: 200V AC/minute
* RoHS2 compliance
*
In using the products, refer to "Handling Precaution for Terminal
and Connector" described on our website (Technical documents
of Product information page)
*
Contact JST for details.
[Harness]
･ This connector can also be applicable the
frequency of 12GHz or more.
･ Space saving and low profile design
･ Easy mating and unmating connector
･ Adopting extra fine diameter high frequency
cable
・
Insertion loss (dB/m)
[Base]
Frequency from DC to 12GHz
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers. The dimensions above are our recommendation value.
2. The above figure is the figure viewed from the connector mounting side.
PC board layout
2
AYU1 CONNECTOR
AYU1 CONNECTOR AYU1 CONNECTOR
AYU1 CONNECTOR
Co-axial connector
Emboss Tape
3
2.6
1.8
1.28
φ
2
Material and Finish
Contact: Copper alloy, nickel-undercoated,
selective gold-plated
Housing: Heat resisting resin, UL94V-0
Shell: Copper alloy, copper-undercoated, silver-plated
Q'ty / reel
Model No.
AYU1-1P-02676-120
5,000
RoHS2 compliance
Base
