To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, afliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Afrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
December 2015
©2015 Fairchild Semiconductor Corporation
FDB0170N607L Rev.C
www.fairchildsemi.com
1
FDB0170N607L N-Channel PowerTrench® MOSFET
FDB0170N607L
N-Channel PowerTrench® MOSFET
60 V, 300 A, 1.4 mΩ
Features
Max rDS(on) = 1.4 mΩ at VGS = 10 V, ID = 39 A
Fast Switching Speed
Low Gate Charge
High Performance Trench Technology for Extremely Low
RDS(on)
High Power and Current Handling Capability
RoHS Compliant
General Description
This N-Channel MOSFET is produced using Fairchild
Semiconductor’s advance PowerTrench® process that has
been especially tailored to minimize the on-state resistance
while maintaining superior ruggedness and switching
performance for industrial applications.
Applications
Industrial Motor Drive
Industrial Power Supply
Industrial Automation
Battery Operated tools
Battery Protection
Solar Inverters
UPS and Energy Inverters
Energy Storage
Load Switch
D(Pin4, tab)
G
S(Pin2,3,5,6,7)
(Pin1)
123
4
567
1. Gate
2. Source/Kelvin Sense
3. Source/Kelvin Sense
4. Drain
5. Source
6. Source
7. Source
D2-PAK
(TO263)
MOSFET Maximum Ratings TC = 25 °C unless otherwise noted.
Thermal Characteristics
Package Marking and Ordering Information
Symbol Parameter Ratings Units
VDS Drain to Source Voltage 60 V
VGS Gate to Source Voltage ±20 V
ID
Drain Current -Continuous TC = 25°C (Note 5) 300
A -Continuous TC = 100°C (Note 5) 210
-Pulsed (Note 4) 1620
EAS Single Pulse Avalanche Energy (Note 3) 1109 mJ
PD
Power Dissipation TC = 25°C 250 W
Power Dissipation TA = 25°C (Note 1a) 3.8
TJ, TSTG Operating and Storage Junction Temperature Range -55 to +175 °C
RθJC Thermal Resistance, Junction to Case (Note 1) 0.6 °C/W
RθJA Thermal Resistance, Junction to Ambient (Note 1a) 40
Device Marking Device Package Reel Size Tape Width Quantity
FDB0170N607L FDB0170N607L D2-PAK-7L 330mm 24mm 800 units
www.fairchildsemi.com
2
©2015 Fairchild Semiconductor Corporation
FDB0170N607L Rev.C
FDB0170N607L N-Channel PowerTrench® MOSFET
Electrical Characteristics TJ = 25 °C unless otherwise noted.
Off Characteristics
On Characteristics (Note 2)
Dynamic Characteristics
Switching Characteristics
Drain-Source Diode Characteristics
Symbol Parameter Test Conditions Min. Typ. Max. Units
BVDSS Drain to Source Breakdown Voltage ID = 250 μA, VGS = 0 V 60 V
ΔBVDSS
ΔTJ
Breakdown Voltage Temperature
Coefficient ID = 250 μA, referenced to 25 °C 13 mV/°C
IDSS Zero Gate Voltage Drain Current VDS = 48 V, VGS = 0 V 1 μA
IGSS Gate to Source Leakage Current VGS = ±20 V, VDS = 0 V ±100 nA
VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250 μA234V
ΔVGS(th)
ΔTJ
Gate to Source Threshold Voltage
Temperature Coefficient ID = 250 μA, referenced to 25 °C -13 mV/°C
rDS(on) Static Drain to Source On Resistance VGS = 10 V, ID = 39 A 1.1 1.4 mΩ
VGS = 10 V, ID = 39 A, TJ= 150°C 1.9 3.5
gFS Forward Transconductance VDS = 10 V, ID = 39 A 159 S
Ciss Input Capacitance VDS = 30 V, VGS = 0 V,
f = 1 MHz
13750 19250 pF
Coss Output Capacitance 3235 4530 pF
Crss Reverse Transfer Capacitance 240 340 pF
RgGate Resistance 2.5 Ω
td(on) Turn-On Delay Time
VDD = 30 V, ID = 39 A,
VGS = 10 V, RGEN = 6 Ω
61 97 ns
trRise Time 64 103 ns
td(off) Turn-Off Delay Time 83 133 ns
tfFall Time 37 60 ns
QgTotal Gate Charge VGS = 0 V to 10 V
VDD = 30 V,
ID = 39 A
173 243 nC
QgTotal Gate Charge VGS = 0 V to 5 V 89 125
Qgs Gate to Source Gate Charge 61 nC
Qgd Gate to Drain “Miller” Charge 26 nC
ISMaximum Continuous Drain to Source Diode Forward Current 300 A
ISM Maximum Pulsed Drain to Source Diode Forward Current 1620 A
VSD Source to Drain Diode Forward Voltage VGS = 0 V, IS = 39 A (Note 2) 0.8 1.2 V
trr Reverse Recovery Time IF = 39 A, di/dt = 100 A/μs 90 144 ns
Qrr Reverse Recovery Charge 95 152 nC
Notes:
1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins.
RθJC is guaranteed by design while RθCA is determined by the user's board design.
a) 40 °C/W when mounted on a 1 in2 pad of 2 oz copper.
b) 62.5 °C/W when mounted on a minimum pad of 2 oz copper.
2. Pulse Test: Pulse Width < 300 μs, Duty cycle < 2.0 %.
3. EAS of 1109 is based on starting TJ = 25 °C, L = 0.3 mH, IAS = 86 A, VDD = 10V, VGS = 54 V. 100% test at L =0.1 mH, IAS = 124 A.
4. Pulsed Id please refer to Figure “Forward Bias Safe Operating Area” for more details.
5. Computed continuous current limited to Max Junction Temperature only, actual continuous current will be limited by thermal & electro-mechanical application board design.
www.fairchildsemi.com
3
©2015 Fairchild Semiconductor Corporation
FDB0170N607L Rev.C
FDB0170N607L N-Channel PowerTrench® MOSFET
Typical Characteristics TJ = 25 °C unless otherwise noted.
Figure 1.
0.00.51.01.5
0
100
200
300
VGS = 7 V
VGS = 6.5 V
VGS = 8 V
PULSE DURATION = 80 μs
DUTY CYCLE = 0.5% MAX
VGS = 6 V
VGS = 10 V
ID, DRAIN CURRENT (A)
VDS, DRAIN TO SOURCE VOLTAGE (V)
On Region Characteristics Figure 2.
0 100 200 300
0
1
2
3
VGS = 6.5 V
PULSE DURATION = 80 μs
DUTY CYCLE = 0.5% MAX
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
ID, DRAIN CURRENT (A)
VGS = 7 V VGS = 8 V
VGS = 6 V
VGS = 10 V
N o r m a l i z e d O n - R e s i s t a n c e
vs. Drain Current and Gate Voltage
F i g u r e 3 . N o r m a l i z e d O n R e s i s t a n c e
-75 -50 -25 0 25 50 75 100 125 150 175
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
ID = 39 A
VGS = 10 V
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
TJ, JUNCTION TEMPERATURE (oC)
vs. Junction Temperature
Figure 4.
45678910
0
2
4
6
8
10
TJ = 150 oC
ID = 39 A
TJ = 25 oC
VGS, GATE TO SOURCE VOLTAGE (V)
rDS(on), DRAIN TO
SOURCE ON-RESISTANCE (mΩ)
PULSE DURATION = 80 μs
DUTY CYCLE = 0.5% MAX
O n- Re si st an ce vs . Ga t e to
Source Voltage
Figure 5. Transfer Characteristics
234567
0
100
200
300
TJ = 175 oC
VDS = 5 V
PULSE DURATION = 80 μs
DUTY CYCLE = 0.5% MAX
TJ = -55 oC
TJ = 25 oC
ID, DRAIN CURRENT (A)
VGS, GATE TO SOURCE VOLTAGE (V)
Figure 6.
0.0 0.2 0.4 0.6 0.8 1.0 1.2
0.001
0.01
0.1
1
10
100
300
TJ = -55 oC
TJ = 25 oC
TJ = 175 oC
VGS = 0 V
IS, REVERSE DRAIN CURRENT (A)
VSD, BODY DIODE FORWARD VOLTAGE (V)
S ou rc e t o D ra in D i o de
Forward Voltage vs. Source Current
www.fairchildsemi.com
4
©2015 Fairchild Semiconductor Corporation
FDB0170N607L Rev.C
FDB0170N607L N-Channel PowerTrench® MOSFET
Figure 7.
0 50 100 150 200
0
2
4
6
8
10
ID = 39 A
VDD = 40 V
VDD = 30 V
VGS, GATE TO SOURCE VOLTAGE (V)
Qg, GATE CHARGE (nC)
VDD = 20 V
Gate Charge Characteristics Figure 8.
0.1 1 10 60
100
1000
10000
50000
f = 1 MHz
VGS = 0 V
CAPACITANCE (pF)
VDS, DRAIN TO SOURCE VOLTAGE (V)
Crss
Coss
Ciss
C a p a c i t a n c e v s . D r a i n
to Source Voltage
F i g u r e 9 . U n c l a m p e d I n d u c t i v e
Switching Capability
0.001 0.01 0.1 1 10 100 1000 10000
1
10
100
1000
TJ = 25 oC
TJ = 150 oC
tAV, TIME IN AVALANCHE (ms)
IAS, AVALANCHE CURRENT (A)
Figure 10.
0.1 1 10 100 500
0.1
1
10
100
1000
5000
100 μs
10 μs
CURVE BENT TO
MEASURED DATA
10 ms
100 ms/DC
1 ms
ID, DRAIN CURRENT (A)
VDS, DRAIN to SOURCE VOLTAGE (V)
THIS AREA IS
LIMITED BY rDS(on)
SINGLE PULSE
TJ = MAX RATED
RθJC = 0.6 oC/W
TC = 25 oC
Forward B i a s S a fe
Operating Area
Figure 11.
10-5 10-4 10-3 10-2 10-1 1
102
103
104
105
P(PK), PEAK TRANSIENT POWER (W)
SINGLE PULSE
RθJC = 0.6 oC/W
TC = 25 oC
t, PULSE WIDTH (sec)
Single Pulse Maximum Power Dissipation
Typical Characteristics TJ = 25 °C unless otherwise noted.
www.fairchildsemi.com
5
©2015 Fairchild Semiconductor Corporation
FDB0170N607L Rev.C
FDB0170N607L N-Channel PowerTrench® MOSFET
Figure 12.
10-5 10-4 10-3 10-2 10-1 1
10-3
10-2
10-1
1
2
SINGLE PULSE
DUTY CYCLE-DESCENDING ORDER
r(t), NORMALIZED EFFECTIVE TRANSIENT
THERMAL RESISTANCE
t, RECTANGULAR PULSE DURATION (sec)
D = 0.5
0.2
0.1
0.05
0.02
0.01
NOTES:
ZθJC(t) = r(t) x RθJC
RθJC = 0.6 oC/W
Duty Cycle, D = t1 / t2
Peak TJ = PDM x ZθJC(t) + TC
PDM
t1
t2
Junction-to-Case Transient Thermal Response Curve
Typical Characteristics TJ = 25 °C unless otherwise noted.
0.95
3.45
10.50
8.40
(
1.27
) 6X
10.20
7.62
1.40
1.20
4.70
4.30
C
15.70
15.10
0.60
0.40
A
B
7.70
MIN
8.78
8.38
10.20
9.70
9.40
9.00
1.40
1.00
1.40
MAX
C
0.90
0.70
0.70
0.50
C
1.27
6X
7.62
0.73
0.25
A
M
A
5.20
4.80
0.254
C
2.84
2.44
0.20
MAX
0
-
GAGE PLANE
SEATING PLANE
R0.50
0.20
B
NOTES:
A. PACKAGE CONFORMS TO JEDEC TO-263
VARIATION CB EXCEPT WHERE NOTED.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C
OUT OF JEDEC STANDARD VALUE.
D. DIMENSION AND TOLERANCE AS PER ASME
Y14.5-1994.
E. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
F. LAND PATTERN RECOMMENDATION PER IPC.
TO127P1524X465-8N.
G. DRAWING FILE NAME: TO263A07REV5.
LAND PATTERN RECOMMENDATION
17
1
7
8
DETAIL A
SCALE 2:1
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81358171050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC