1210A
Low power consumption, low heat generation,
high luminous intensity, and long service life.
LED luminaries provide superior performance
compared to conventional luminaries
LED Light Bar Model CLF
LED Work Light Model CLM
LED Light Bar Model CLB
LED Work Light Model CLE
LED Luminaire Series
External dimensions Specications
External dimensions
Specications
Approx. 400mm from cord exit hole
8.5
6.5
4.2
35°
2.5
155
27
26
30
R2.1
φ4
15
Mounting Screw (M4)
Luminous section
22.8 26
Cord exit hole
Mode
Agency Approval
Mass
Vibration resistance
Mounting Direction
Luminous intensity (at optical center)
Protection Rating
Operating temperature range
Operating voltage range
Rated voltage
CLE-24NCLE-24
CE
0.3kg
19.6m/s2
Horizontal, vertical (up and down)
20cd 130cd
IP65f
-25°C - +60°C
Rated Voltage ±10％
DC24V (No polarity)
Glass surface Frosted Clear
Wide Beam Narrow Beam
Rated power consumption
3W
LED Work Light
CLE
LEDLightBar
CLB
(82)
60
(60)
35
φ7
76.2
20
50±5
(Unit : mm)
(Unit : mm)
Approx. 1400mm from cord exit hole
φ71
CLE-24N
CLE-24
www.patlite.co.jp
CLB-24N1: 100 CLB-24N2: 200 CLB-24N: 332
CLB-24N1: 124 CLB-24N2: 224 CLB-24N: 356
CLB-24N1: 135±1 CLB-24N2: 235±1 CLB-24N: 367±1
CLB-24N1: 146 CLB-24N2: 246 CLB-24N: 378
Model
Agency Approval
Mass
Vibration resistance
Mounting Direction
Luminous intensity at optical center(lx)*
Protection Rating
Main body
Operating temperature range
Rated current consumption(mA)
Rated voltage
LED color
CLB-24N2-CLB-24N1- CLB-24N-
CE / RoHS
60g ± 10%41g ± 10% 86g ± 10%
19.6m/s2
Indoor : Horizontal or vertical (up and down)
4020 20 85 40 185 60 60 300
IP42
Polycarbonate
Relative humidity Less than 90% RH(No condensation)
-30°C - +60°C
Operating voltage range
DC24V ± 1V
DC24V (No polarity)
RYCRYCRYC
7035 35 60 70 120 122 224
+5
-5 +5
-5 +10
-10 +10
-10 +10
-10 +20
-20 +18
-18
122
+18
-18 +50
-40
0804
Mounting dimensions
For the benet of mankind and the earth,
Patlite is committed to developing environ-
mentally friendly products.
To ensure correct use of these products, read the
Instruction Manual prior to use.
Failure to follow all safeguards can result in fire,
electric shock, or other accidents.
Specifications are subject to change without notice.
http://www.patlite.co.jp/int/ E-mail: overseas@patlite.co.jp
8-8, Matsuyamachi, Chuo-ku, Osaka, Japan
542-0067
International Division, Sales and Marketing Department
TEL.+81-6-6763-8220
TEL.+1-310-328-3222
TEL.+43-1-961-0655
TEL.+65-6226-1111
TEL.+86-21-68761533
FAX.+1-310-328-2676
FAX.+81-6-6763-8221
FAX.
+43-1-961-0655-210
FAX.+65-6324-1411
FAX.+86-21-68769688
20130 S. Western Ave., Torrance, CA 90501, U.S.A.
Teinfalt strasse 8/4.Stock 1010 Vienna, Austria
2 Havelock Road, #05-01/02, Apollo Centre, Singapore 059763
Block E, No.9 FL, Hua Du Bldg., No.828-838 Zhang Yang Road, Pudong Dist., Shanghai 200122 China
* at 50cm
Fluorescent lamp
CLF
Average service life (4,000 - 13,000 hours)
Average service life (40,000 hours)
Long service life (Service life comparison)
service
service
Life
Life
10
10
times
times
service
Life
10 times
Fluorescent lamp
CLF
87.6kwh
18.28kwh
Less power consumption (Annual power consumption comparison)
15
15
Fluorescent lamp
CLF
31.27kg
6.51kg
Global warming measures (annual CO2 emission comparison)
High illumination intensity (Measurement of illumination distribution : CLF20-24-C)
Measured amount at 50cm from light source Measured amount 1 meter from light source
800lx or more within a 300mm diameter 300lx or more within a 500mm diameter
High
High
intensity
intensity
High
intensity
Uniform
Uniform
illumination
illumination
Uniform
illumination
PATLITE’s LED luminaries, series,
is designed as the next generation luminary devices
that serve a wide range of applications
in the factory automation eld.
lx：Luminous intensity・・・Amount of light power of the illuminated area
Example of recommended standards for luminous intensity
CE Marking・・・・・ Work-plane illuminance 500lx or more
(International Commission on Illumination)
PATLED’S series provide superior performance
over conventional luminaries
1. LED life is when its brightness decreases to 70% of initial brightness
2. Calculation of annual CO2 emission, comparison between 100V20W uorescent lamp and CLF20-24-C. Assumed 10 hour operation per day. Amount of CO2 emission is 0.357kg per hour.
1
2
2
PATLED’s (CLM and CLF series) are designed to satisfy the technical requirements for
luminary devices. PATLED’s have CE Marking and are RoHS Directive compliant for use
in overseas countries.
Model CLF20-24-C
Electric
Electric
Energy
Energy
15
CO
CO2
Emission
Emission
CO2
Emission
Electric
Energy
15
LED Light Bar
Waterproof Illumination
Model CLF
1,700lx illumination and daylight color temperature are suitable for
performing precise work.
High power 1,700lx illumination* for precise work operation
Robust aluminum body, polycarbonate cover and
silicone gasket securely protect the product.
Rubber gasket is placed on the backside of body to
meet IP67 construction for flush mounting.
Compared to uorescent lights, the steady light generated by the CLF reduces eye fatigue
and misjudgement of rotating objects even without the use of a high frequency inverter.
Water and dustproof IP67 construction
Steady Light Source
Rated voltage
Operating voltage range
Power consumption
Light source
Luminous intensity at optical center
(lx/50cm)
Operating temperature range
Installation
Protection rating
Vibration resistance
Mass
DC24V (No polarity)
Model
LED color
CLF10-24
CY
RCYR
850320
240 1,700630470
Rated voltage±10％
CLF20-24
2.5W 5W
High intensity LED×4 High intensity LED×8
Main body Housing : Aluminum  Cover : Polycarbonate
-30°C - +60°C (No condensation 90% RH or less)
Indoor , Forward Direction
IP67
19.6m/S2
205g±10g 345g±10g
External dimensions
Mounting dimensions
CLF
Daylight color close to sunshine Illumination simulation
Daylight color (6,500-7,500K) is dened as a color
close to sunshine at noon, and is suitable for
recognizing shapes, precise work, test and
research applications. (Close to D65 light source)
Power cable is drawn from the backside of body.
When ush mounting, the cable will not be exposed
and the cable bushing is not required. Multiple units
can be installed vertically or horizontally without
any space between the units.
The specially designed lens gives uniform illumina-
tion and intense luminosity over a widerange.
As a replacement of orescent lamps, the CLF series
also provide long service life and maintenance-free
operation.
* Luminous intensity at 50cm (CLF20-24-C)
Specications of red color type and yellow color type may be dierent from those of white color type
Color is closer to
sunshine than
commonly used day
white color luminary
Water and dustproof IP67 construction
Vertical mounting
120
5.5
5.5
2-M4*
2-M4*
220
φ15
φ15
50
Name plate Name plate
50
30
27
108
130
35
50
30
27 35
208
CLF20-24CLF10-24
230
(10.5)
(10.5)
(8)
220
120
φ4.1
φ4.1
Approx. 150
Approx. 420
5
Approx. 150
Approx. 420
5
φ15 φ15
11
The light emitted from the unit does not contain infrared or UV rays
which radiate heat and damage materials
Stable operation -30°C to +60°C
Red
Semiconductor
manufacturing machinery,
tester, etc.
Yellow
Semiconductor
manufacturing machinery,
cleanroom environment, etc.
White color LED is perfect for machine tool and
control panel applications
* When mounting with supplied nuts : φ4.5 (Unit : mm)
1700lx
450lx
220lx
400lx
210lx
500mm
450mm
550mm
650mm
460lx
305lx
170lx
CLF20-24-C
（5W）
40W
1025lx
215lx
105lx
20W
Straight uorescent lamp
705lx
1000mm
1500mm
IP67
High intensity LED is used for light source. Power consumption is only 3W and
heat generation is greatly reduced.
Superior luminous intensity of 500cd at optical center
IP67f construction is suitable for machine tool application where oil resistance is
essential. Body is made of robust aluminum.
Water, oil and dust resistant IP67f construction
RoHS Directive compliant and lead-free soldering design
CLM-24 is RoHS compliant and environmentally conscious materials are used.
Rated voltage
Operating voltage range
Rated power consumption
Rated current consumption
Light source
Luminous intensity
(at optical center)
Glass surface
Operating temperature range
Mounting Direction
Protection rating
Vibration resistance
Mass
DC24V (No polarity)
Model CLM-24
21.6V〜26.4V
3W
100 ± 5mA
High intensity LED×5
500cd (at optical center)
Tempered glass
Main body Aluminum die cast (baked surface finish)
-30°C - +60°C (No condensation 90% RH or less)
Horizontal, vertical (up and down)
IP67f
19.6m/S JIS C 0911-1984 30Hz
0.45kg
External dimensions Mounting dimensions
3-φ6.4
26
43.6
60
2328
10
55
（17）
(97.5)
φ85
*Power cable length : 1400 mm from cable exit
*Do not stare into beam CLASS 2 LASER
CLM
1m
φ800mm
500cd 90
45
Luminous intensity of 500cd at optical center
Mounting in any direction is possible
Ecient heat radiation design
Five super-bright LEDs deliver 500cd of luminous intensity
at the optical center while consuming only 3W of electricity
and generating very little heat. Illumination is also evenly
distributed over an 800mm diameter at 1 meter from the
light source.
Specially designed aluminum body with heat sink
provides durable construction, low operating
temperature and bright, stable, LED function.
CLM-24 can be mounted in any direction by
adjusting the mounting angle. Body and mounting
bracket is securely xed with a screw placed on the
backside of body. Direct Mounting is also possible
when mounting bracket is removed.
IP67F LED work light
Oil resistant spot illumination
Model CLM-24
(Unit : mm)
2