Document Number: 93562 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 17-Jun-08 1
Single Phase Rectifier Bridge, 2 A
2KBP Series
Vishay High Power Products
FEATURES
• Suitable for printed circuit board mounting
• Compact construction
• High surge current capability
• RoHS compliant
DESCRIPTION
A 2 A single phase encapsulated bridge rectifier consisting of
four single diodes connected as a full bridge. They are
intended for general applications in industrial and consumer
equipment.
ELECTRICAL SPECIFICATIONS
PRODUCT SUMMARY
IO2 A
VRRM 50 to 1000 V
D-44
RoHS
COMPLIANT
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
IO2.0 A
IFSM
50 Hz 60
A
60 Hz 63
I2t
50 Hz 18
A2s
60 Hz 16
VRRM 50 to 1000 V
TJ- 40 to 150 °C
VOLTAGE RATINGS
PART NUMBER
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
(V)
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
(V)
VRMS, MAXIMUM RECOMMENDED
RMS SUPPLY VOLTAGE
(V)
2KBP005 50 50 20
2KBP02 200 200 80
2KBP04 400 400 125
2KBP06 600 600 250
2KBP08 800 800 380
2KBP10 1000 1000 500
www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 93562
2Revision: 17-Jun-08
2KBP Series
Vishay High Power Products Single Phase
Rectifier Bridge, 2 A
Fig. 1 - Ambient Temperature Ratings Fig. 2 - Non-Repetitive Surge Ratings
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum DC output current IO
TA = 50 °C, resistive or inductive load 2.0
A
TA = 50 °C, capacitive load 1.8
Maximum peak one cycle,
non-repetitive surge current IFSM
t = 10 ms, 20 ms Following any rated load
condition and with rated VRRM
reapplied
60
A
t = 8.3 ms, 16.7 ms 63
Maximum I2t capability for fusing I2t
t = 10 ms 100 % VRRM
reapplied Initial TJ =
TJ maximum
18
A2s
t = 8.3 ms 16
t = 10 ms No voltage
reapplied
26
t = 8.3 ms 23
Maximum I2√t capability for fusing I2√t t = 0.1 to 10 ms, no voltage reapplied 255 A2√s
Maximum peak forward voltage per diode VFM IFM = 1 A, TJ = 25 °C 1.0 V
Typical peak reverse leakage
current per diode IRM
TJ = 25 °C, 100 % VRRM 10 µA
TJ = 150 °C, 100 % VRRM 1.0 mA
Operating frequency range f 40 to 1000 Hz
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL VALUES UNITS
Operating junction and storage temperature range TJ, TStg - 40 to 150 °C
Approximate weight
4g
0.14 oz.
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
0
0 20406080 100 120 140 160
Average Output Current (A)
Maximum Allowable Ambient Temperature (°C)
Capacitive load
Resistive, inductive load
Maximum Peak Output Current (A)
Pulse Train Duration (s)
50
40
30
20
10
0
10-2 10-1 110
60
70
From any rated
load condition
Document Number: 93562 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 17-Jun-08 3
2KBP Series
Single Phase
Rectifier Bridge, 2 A Vishay High Power Products
CIRCUIT CONFIGURATION
+
-
~
~
IO
LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95329
Document Number: 95329 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 04-Jul-08 1
D-44
Outline Dimensions
Vishay Semiconductors
DIMENSIONS in millimeters (inches)
3.8 (0.15)
3.8 (0.15)
3.8 (0.15)
6.8 (0.27)
Ø 0.75
(0.030)
+~~-
17.5 (0.69)
22 (0.87) 15 (0.59)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
