RF Vector Signal Generators TSG4100A Series Key performance specifications True DC to 2 GHz, 4 GHz or 6 GHz to support both analog and vector/ digital signal generation Typical 0.30 dB amplitude accuracy (0 dBm CW signal at 22 C) from 10 MHz to 6 GHz I/Q modulation inputs (400 MHz RF bandwidth) ASK, FSK, MSK, PSK, QAM, VSB, and custom I/Q The TSG4100A Series RF Vector Signal Generator offers mid-range performance and up to 200 MHz modulation bandwidth at an entry-level RF signal generator price. They use a new technique to provide spurious free outputs with low phase noise (-113 dBc/Hz at 20 kHz offset from 1 GHz carrier) and extraordinary frequency resolution (1 Hz at any frequency). The TSG4100A Series comes standard with analog modulation. Convenient, in-field software upgrades allow for easy transition from analog to more advanced vector and digital modulation capabilities, providing the most flexible configuration and best CAPEX protection. These instruments complement other leading mid-range RF test solutions from Tektronix, such as the USB-based RSA306 Spectrum Analyzer and MDO4000B and MDO3000 Mixed Domain Oscilloscopes. The TSG4100A Series instruments use an ovenized SC-cut oscillator (TSG410xA-M00 or E1 models) time-base, providing a 100 X improvement in stability (and a 100 X reduction in the in-close phase noise) compared to instruments that use a TCXO time-base. Key features Analog and vector/digital signal generation capabilities Dual baseband ARB generators Analog modulation The Tektronix TSG4100A Series RF Vector Signal Generators offer a wide variety of modulation capabilities. Modes include amplitude modulation (AM), frequency modulation (FM), phase modulation (M), and pulse modulation. There is an internal modulation source as well as an external modulation input. The internal modulation source produces sine, ramp, saw, square, and noise waveforms. An external modulation signal may be applied to the rear panel modulation input. The internal modulation generator is available as an output on the rear panel. Vector modulation The TSG4100A Series builds on this performance by adding full support for vector signal modulation on RF carriers between 400 MHz and 6.0 GHz. It features a dual arbitrary waveform generator operating at 125 MHz for baseband signal generation. The generator has built-in support for the most common vector modulation schemes: ASK, QPSK, DQPSK, /4 DQPSK, 8PSK, FSK, CPM, QAM (4 to 256), 8VSB, and 16VSB. It also includes built-in support for all the standard pulse shaping filters used in digital communications: raised cosine, root-raised cosine, Gaussian, rectangular, triangular, and more. Lastly, it provides direct support for the controlled injection of additive white Gaussian noise (AWGN) into the signal path. Analog modulation standard Soft key upgrade to vector/digital modulation at very low cost Digital modulation applications for GSM, EDGE, W-CDMA, APCO-25, DECT, NADC, PDC, and TETRA USB, GPIB, RS-232, and LAN interfaces 12 pounds (5.6 kg) 2U high and half standard rack width www.tektronix.com 1 TSG4100A Series RF Vector Signal Generator Internal baseband generators Power vs. frequency Using a novel architecture for I/Q modulation, the TSG4100A Series provides quick, user-friendly waveform generation. The baseband generator supports the playback of pure digital data. It automatically maps digital symbols into a selected I/Q constellation at symbol rates of up to 6 MHz and passes the result through the selected pulse shaping filter to generate a final waveform updated in real time at 125 MHz. This baseband signal is then modulated onto an RF carrier using standard IQ modulation techniques. All TSG4100A Series models have cascaded stages of amplifiers and digital attenuators to drive the RF output. Five stages can provide up to +25 dB of gain to -130 dB of attenuation in 156 digitally controlled steps. During factory calibration, the output power is measured at 32 frequencies per octave for each of the 156 attenuator steps to populate a memory matrix with about 40,000 elements. When set to a particular frequency and power, the instrument interpolates between these matrix elements to determine the best attenuator setting. An analog attenuator is used to provide 0.01 dB resolution between matrix elements and to compensate for residual thermal effects. Digital communications protocols (GSM, GSM EDGE, W-CDMA, APCO-25, DECT, NADC, PDC, and TETRA) quickly configure the signal generator to the correct modulation type, symbol data rates, TDMA duty cycles, and digital waveform filters. The preset protocols also configure the rear-panel TDMA, START of FRAME, and SYMBOL CLOCK digital outputs. The baseband generators can be configured for these protocols without the use of external computers or third party software. The I/Q waveforms are computed in real time. Symbols are mapped to constellations, digitally filtered, and up-sampled to 125 Msps to drive the I/ Q modulator via dual 14-bit DACs. The symbols can be a fixed pattern, PRBS data from an internal source, or come from a downloaded user list of up to 16 Mbits. The constellation mapping can be modified by the user. Digital filters include raised cosine, root raised cosine, Gaussian, rectangular, linear, sinc, and user-defined FIR. External IQ modulation The rear-panel BNC I/Q modulation inputs and outputs enable arbitrary vector modulation via an external source. The external signal path supports maximally 400 MHz of RF bandwidth with a full scale range of 0.5 V and a 50 input impedance. 2 www.tektronix.com OCXO time-base These instruments offer an oven-controlled crystal oscillator (OCXO) timebase. The time-base uses a third-overtone stress-compensated 10 MHz resonator in a thermostatically controlled oven. The time-base provides very low phase noise and very low aging. Easy remote communications Remote operation is supported with RS-232, LAN, and GPIB interfaces. All instrument functions can be controlled and read over any of the interfaces. Up to nine instrument configurations can be saved in non-volatile memory. Datasheet Specifications All specifications apply to all models unless noted otherwise. Frequency BNC output, all models DC to 62.5 MHz N-type outputs TSG4102A 950 kHz to 2.0 GHz TSG4104A 950 kHz to 4.0 GHz TSG4106A 950 kHz to 6.0 GHz Frequency resolution 1 Hz at any frequency Switching speed <8 ms (to within 1 ppm) Frequency error <(10-18 + time-base error) x fc Frequency stability 1 x 10-11 (1 s Allan variance) Front panel BNC output Frequency range DC to 62.5 MHz Amplitude 1.00 VRMS to 0.001 VRMS (-47 dBm to +14.96 dBm) Offset 1.5 VDC Offset resolution 5 mV Maximum excursion 1.817 V (amplitude + offset) Amplitude resolution <1 % Amplitude accuracy 0.7 dB Harmonics, typical <-40 dBc Spurious, typical <-65 dBc Output coupling DC, 50 2% Impedance 50 Reverse protection 5 VDC VSWR, typical < 1.6 :1 www.tektronix.com 3 TSG4100A Series RF Vector Signal Generator Front panel N-type output Power output TSG4102A +16.5 dBm to -110 dBm TSG4104A +16.5 dBm to -110 dBm (<3 GHz) TSG4106A +16.5 dBm to -110 dBm (<4 GHz) +10 dBm to -110 dBm (4-6 GHz) Voltage output TSG4102A 1.5 VRMS to 0.7VRMS TSG4104A 1.5 VRMS to 0.7 VRMS (<3 GHz) TSG4106A 1.5 VRMS to 0.7 VRMS (<4 GHz) Amplitude resolution 0.01 dBm Amplitude accuracy CW, 50 load (dB, typical) CW, 50 load (dB, max) CW, 18 C to 28 C >10 dBm 10 to -30 dBm -30 to -60 dBm -60 to -100 dBm <-100 dBm 10 MHz to 0.1 GHz 0.2 0.25 0.35 0.45 0.6 0.1 GHz to 2 GHz 0.15 0.15 0.25 0.35 0.6 2 GHz to 4 GHz 0.3 0.2 0.35 0.6 0.8 4 GHz to 6 GHz NA 0.3 0.4 0.75 1.25 Level range: +5 to -30 dBm (max) Temperature: 18 C to 28 C 5 C to 40 C 5 C to 40 C 10 MHz to 0.1 GHz 0.6 1.0 0.7 0.1 GHz to 2 GHz 0.6 1.0 0.6 2 GHz to 4 GHz 0.6 1.0 0.7 4 GHz to 6 GHz 1 1.5 0.9 Impedance 50 Output coupling AC, 50 VSWR, typical <1.5 (2 MHz to 2 GHz) +5 to -30 dBm (typical) <1.8 (2 GHz to 6 GHz) Reverse protection 30 VDC, +25 dBm IQ modulation output level accuracy Output amplitude is -5 dBm. 4 www.tektronix.com Temperature: 18 C to 28 C 5 C to 40 C Fc: Typical (dB) Max (dB) Typical (dB) <2 GHz 0.1 0.4 0.4 2 GHz to 4 GHz 0.2 0.6 0.4 4 GHz to 6 GHz 0.4 0.8 0.7 Datasheet Spectral purity of the RF output Subharmonics Harmonics, maximum None Output level <0 dBm, 1 GHz CW signal TSG4102A and TSG4104A < -38 dBc TSG4106A < -30 dBc Harmonics, typical (output level < 0 dBm) < -35 dBc, CW , Fc < 2 GHz Spurious (typical) Output level -10 dBm, CW < -68 dBc >10 kHz from carrier in 950 kHz to 1 GHz < -60 dBc >10 kHz from carrier in 1 GHz to 2 GHz < -55 dBc >10 kHz from carrier in 2 GHz to 4 GHz < -55 dBc >10 kHz from carrier in 4 GHz to 6 GHz Residual FM, typical 1 Hz rms (300 Hz to 3 kHz bandwidth) Residual AM, typical 0.006 % rms (300 Hz to 3 kHz bandwidth) SSB phase noise Output level is +5 dBm at 18 C to 28 C. Carrier Offset from carrier, typical (dBc/Hz) 1 kHz 10 kHz 20 kHz 1 MHz 1 GHz -102 -110 -113 -124 2 GHz -96 -104 -107 -118 3 GHz -93 -102 -105 -120 6 GHz -87 -96 -99 -114 SSB phase noise at 1 GHz carrier, maximum (output level +5 dBm, 5 to 40 ) 1 kHz offset -95 dBc/Hz 10 kHz offset -106 dBc/Hz 20 kHz offset -107 dBc/Hz 1 MHz offset -120 dBc/Hz 2 GHz offset -118 dBc/Hz >3 GHz offset -120 dBc/Hz www.tektronix.com 5 TSG4100A Series RF Vector Signal Generator Spectral purity of the RF output Phase setting (front panel outputs) Maximum phase step 360 Phase resolution 0.01 (DC to 100 MHz) 0.1 (100 MHz to 1 GHz) 1.0 (1 GHz to 6 GHz) OCXO time-base (Option M00 or Option E1) Oscillator type Oven-controlled, 3rd OT, SC-cut crystal Initial accuracy at calibration (20 minute warm-up, at 18 C to 28 C) <0.02 ppm Temperature drift (0 C to 40 C) <0.003 ppm Aging <0.05 ppm/year 6 www.tektronix.com Datasheet VCXO time base (Option M01) Initial accuracy at calibration (20 minute warm-up, at 18 C to 28 C) <0.5 ppm Temperature drift (0 C to 40 C) <5.0 ppm Aging <3.0 ppm/year Time-base input Frequency 10 MHz, 2 ppm Amplitude 0.5 VP-P to 4 VP-P (-2 dBm to +16 dBm) Input impedance 50 , AC coupled Time-base output Frequency 10 MHz, sine Source 50 , DC transformer coupled Amplitude >7.5 dBm Internal modulation source Waveforms Sine, ramp, saw, square, pulse, noise Sine THD -74 dBc (typical at 20 kHz) Ramp linearity <0.05 % (1 kHz) Rate TSG4102A and TSG4104A 1 Hz to 500 kHz: < 62.5 MHz CF 1 Hz to 50 kHz: 62.5 MHz TSG4106A 1 Hz to 500 kHz: < 93.75 MHz CF 1 Hz to 50 kHz: 93.75 MHz Rate resolution 1 Hz Rate error 1:231 + time-base error Noise function White Gaussian noise (rms = dev / 5) Noise bandwidth 1 Hz < ENBW < 50 kHz Pulse generator period 1 s to 10 s Pulse generator width 100 ns to 9999.9999 ms Pulse timing resolution 5 ns Pulse noise function Length 2N-1 PRBS 5 N 32, bit period 100 nS to 10 S www.tektronix.com 7 TSG4100A Series RF Vector Signal Generator Analog modulation output Connector type BNC (rear panel) Impedance 50 Function AM, FM, M, Pulse Scale factor 1 V for full deviation Pulse/Blank Low = 0 V Hi = 3.3 V External analog modulation input Connector type BNC (rear panel) Impedance 100 k Function AM, FM, M, Pulse Scale factor 1 V for full deviation Pulse/Blank Low = 0 V Hi = 3.3 V Input coupling DC or 4 Hz High-pass Pulse Threshold +1 VDC Input Offset < 500 V Amplitude modulation Range 0 to 100% (decreases above +7 dBm) Resolution 0.1% Modulation source Internal or external Modulation distortion, typical BNC output <1 % (fc < 62.5 MHz, fm = 1 kHz) N-type output <3 % (fc > 62.5 MHz, fm = 1 kHz) Modulation bandwidth (external) 8 www.tektronix.com >100 kHz Datasheet Frequency modulation Minimum frequency deviation 0.01 Hz Maximum frequency deviation TSG4102A and TSG4104A TSG4106A Deviation resolution Smaller of fc and 64 MHz - fc. In 0 to 62.5 MHz Frequency range Maximum deviation 62.5 MHz < fc 126.5625 MHz 1 MHz 126.5625 MHz < fc 253.1250 MHz 2 MHz 253.1250 MHz < fc 506.25 MHz 4 MHz 506.25 MHz < fc 1.0125 GHz 8 MHz 1.0125 GHz < fc 2.0 GHz 16 MHz 2.025 GHz < fc 4.0 GHz (TSG4104A) 32 MHz Smaller of fc and 96 MHz - fc. In 0 to 93.75 MHz Frequency range Maximum deviation 93.75 MHz < fc 189.84375 MHz 1 MHz 189.84375 MHz < fc 379.6875 MHz 2 MHz 379.6875 MHz< fc 759.375 MHz 4 MHz 759.375 MHz < fc 1.51875 GHz 8 MHz 1.51875 GHz < fc 3.0375 GHz 16 MHz 3.0375 GHz < fc 6.0 GHz 32 MHz 0.1 Hz Deviation accuracy, typical TSG4102A and TSG4104A < 0.1% of selected deviation + 5 Hz (fc < 62.5 MHz) < 2% of selected deviation + 20 Hz (fc > 62.5 MHz) TSG4106A < 0.1% of selected deviation + 5 Hz (fc < 93.75 MHz) < 2% of selected deviation + 20 Hz (fc > 93.75 MHz) Modulation source Internal or external Modulation distortion, typical < -60 dB (fc=100 MHz, fm=1 KHz, fd= 3 KHz) External FM carrier offset, typical < 0.001 X FM deviation Modulation bandwidth, typical TSG4102A and TSG4104A 500 kHz (fc < 62.5 MHz) 100 kHz (fc > 62.5 MHz) TSG4106A 500 kHz (fc < 93.75 MHz) 100 kHz (fc > 93.75 MHz) www.tektronix.com 9 TSG4100A Series RF Vector Signal Generator Phase modulation Deviation 0 to 360 Deviation resolution, typical 0.01 (DC to 100 MHz) 0.1 (100 MHz to 1 GHz) 1 (1 GHz and above) Deviation accuracy, typical TSG4102A and TSG4104A 2% (fc < 62.5 MHz) 3% (fc > 62.5 MHz) TSG4106A 2% (fc < 93.75 MHz) 3% (fc > 93.75 MHz) Modulation source Internal or external Modulation distortion, typical < -60 dB (fc = 100 MHz, fm =1 kHz, D = 50) Modulation bandwidth, typical TSG4102A and TSG4104A 500 kHz (fc < 62.5 MHz) 100 kHz (fc > 62.5 MHz) TSG4106A 500 kHz (fc < 93.75 MHz) 100 kHz (fc > 93.75 MHz) Pulse modulation Pulse mode Logic High turns RF output ON On-Off ratio, typical BNC output > 70 dB Type-N output > 57 dB (fc < 1.0 GHz) > 40 dB (1.0 GHz fc < 4.0 GHz) > 35 dB (4.0 GHz fc < 6.0 GHz) Pulse feed-through, typical 10% of carrier for 20 ns at turn on Turn On-Off delay 60 ns RF Rise-Fall time, typical 20 ns Modulation source Internal or external pulse 10 www.tektronix.com Datasheet Interface connectors USB USB 2.0, host Ethernet (LAN) 10/100 Base-T.TCP/IP and DHCP default GPIB IEEE488.2 RS-232 4800 to 115,200 baud, RTS/CTS flow External I/Q modulation (Option EIQ) Carrier frequency range 400 MHz to 2.0 GHz (TSG4102A) 400 MHz to 4.0 GHz (TSG4104A) 400 MHz to 6.0 GHz (TSG4106A) I/Q inputs (rear panel) 50 , 0.5 V I/Q full scale input (I2 + Q2)1/2 = 0.5 V Modulation bandwidth max 400 MHz RF bandwidth I or Q input offset <500 V Carrier suppression > -45 dBc for fc 3 GHz > -40 dBc for 3 GHz < fc 5 GHz > -35 dBc for fc > 5 GHz I and Q baseband modulation bandwidth (3 dB from fc) > 200 MHz (fc < 2.5 GHz, RF BW >400 MHz) > 150 MHz (fc > 2.5 GHz, RF BW >300 MHz) Dual baseband generator (Option VM00) Channels 2 (I and Q) DAC data format Dual 14-bit at 125 MS/s Reconstruction filter 10 MHz, 3rd order Bessel LPF Arbitrary symbol memory Up to 16 Mbits Symbol rate 1 Hz to 6 MHz (1 Hz resolution) Symbol length 1 to 9 bits (maps to constellation) Symbol mapping Default or user-defined constellation Symbol source (User-defined symbols, built-in PRBS generator, or settable pattern generator) PRBS length 2n - 1 (5 < n < 32; 31 to about 4.3 x 109 symbols) Pattern generator 16 bits www.tektronix.com 11 TSG4100A Series RF Vector Signal Generator Dual baseband generator (Option VM00) Digital filtering Filter type Raised Cosine, Root Raised Cosine, Gaussian, Rectangular, Linear, Sinc, linearized Gaussian, C4FM, customized FIR Filter length 24 symbols Noise impairments Additive noise White, Gaussian Level -70 dBc to -10 dBc Basic vector modulation formats (Option VM00) Formats by bit Others 12 www.tektronix.com Constellation 1-bit 2-bit 3-bit 4-bit ASK 2ASK 4ASK 8ASK 16ASK FSK BFSK 4FSK 8FSK 16FSK PSK BPSK QPSK 8PSK 16PSK QAM n/a 4QAM n/a 16QAM CPM BCPM 4CPM 8CPM 16CPM VSB n/a n/a 8VSB 16VSB OQPSK, DQPSK, /4DQPSK, 3/8 8 PSK 5-bit 6-bit 8-bit 32QAM 64QAM 256QAM Datasheet Digital modulation applications (typical) Digital modulation applications options Option Application VM01 GSM VM02 GSM-EDGE VM03 W-CDMA VM04 APCO-25 Phase 1 VM05 DECT VM06 NADC VM07 PDC VM08 TETRA VM10 Audio clip (analog AM and FM) Option VM01 GSM, (GMSK, 270.833 kS/s, 935 MHz, 0 dBm), RMS EVM: 0.6% Option VM02 GSM-EDGE, (3/8 8PSK, 270.833 kS/s, 935 MHz, 0 dBm), RMS EVM: 0.30% www.tektronix.com 13 TSG4100A Series RF Vector Signal Generator Digital modulation applications (typical) Option VM03 W-CDMA, (QPSK,3.840Mcps, 2.1425GHz, 0dBm), RMS EVM: 1.7% 14 www.tektronix.com Datasheet Digital modulation applications (typical) Option VM03 W-CDMA (QPSK,3.840Mcps, 1.85 GHz, 0dBm), RMS EVM: 1.7% Option VM04 APCO-25, (4FSK-C4FM, 4.8 kS/s,850 MHz, 0 dBm), Freq Err: 0.5% www.tektronix.com 15 TSG4100A Series RF Vector Signal Generator Digital modulation applications (typical) Option VM05 DECT, (2FSK 1.152 Mbps,1.925 GHz, 0 dBm), RMS FSK Err: 1.5% Option VM06 NADC, (/4 DQPSK, 24.3 kS/s, 875 MHz, 0 dBm), RMS EVM: 0.3% 16 www.tektronix.com Datasheet Digital modulation applications (typical) Option VM07 PDC, (/4 DQPSK, 21 kS/s, 800 MHz, 0 dBm), RMS EVM: 0.6% Option VM08 TETRA, (/4 DQPSK,18 kS/s, 420 MHz, 0 dBm), RMS EVM: 0.7% www.tektronix.com 17 TSG4100A Series RF Vector Signal Generator Digital modulation applications (typical) 32QAM, (6 MS/s, 5.8 GHz, Root raised cosine filter, 0 dBm), RMS EVM: 1.6% 256QAM, (6 MS/s, 2.45 GHz, Root raised cosine filter, -5.00 dBm), RMS EVM: 0.6% TSG4100A-ATT Option Nominal impedance 50 Nominal attenuation 30 dB Frequency range DC to 6 GHz Attenuation deviation 0.75 dB (DC to 6 GHz) Maximum VSWR 1.15 (DC to 4 GHz) 1.2 (4 GHz to 6 GHz) Power rating 5 Watt average power up to 25 C ambient temperature, linearly derated to 1 Watt at 125 C ambient temperature. Weight 0.052 kg 18 www.tektronix.com Datasheet TSG4100A-ATT Option Operating temperature -65 C to 125 C Compliance 2011/65/EU (RoHS) compliant Rear-panel markers Type Symbol Clock, Data Frame, TDMA, and user-defined Amplitude 0.5 to 4 Vpp (-2 dBm to +16 dBm) Output impedance 50 , AC coupled Physical characteristics Dimensions Height 114 mm (4.5 in) Width 216 mm (8.5 in) Depth 347 mm (13.7 in) Weight 5.4 kg (12 lbs) Operating characteristics Temperature Operating +5 C to +40 C Non-operating -20 C to +60 C Humidity Operating Non-operating 5% to 95% relative humidity (%RH) at up to +30 C 5% to 95% RH (Relative Humidity) at up to +30 C 5% to 45% RH above +30 C up to +40 C, non-condensing 5% to 45% RH above +30 C up to +40 C, non-condensing Altitude Operating Up to 3,000 m Non-operating Up to 12,000 m Line power <90 W, 90 to 264 VAC, 47 to 63 Hz with PFC Vibration and shock Random vibration Operating Non-operating 0.27 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes 2.28 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes total for Option M01) total for Option M01) 0.22 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes 2.13 GRMS, 5 500 Hz, 10 minutes per axis, 3 axes (30 minutes total for Options M00 or E1) total for Options M00 or E1) Mechanical shock Non-operating Half-sine mechanical shocks, 50 g peak amplitude, 11 msec duration, 3 drops in each direction of each axis (18 total for Option M01) Half-sine mechanical shocks, 30 g peak amplitude, 11 msec duration, 3 drops in each direction of each axis (18 total for Options M00 or E1) www.tektronix.com 19 TSG4100A Series RF Vector Signal Generator Regulatory information EC Declaration of Conformity EMC EMC Directive 2004/108/EC EN 61326-1 Radiated and Conducted emissions Class A Australia/New Zealand Australia Radio Communications Act 1992 Korea KCC Safety Third Party Certification Standards UL 61010; CSA C22.2 No. 61010-1 EC Declaration of Conformity - Low Voltage Directive 2006/95/EC; EN61010-1 Low Voltage Safety Certification Compliance Equipment type: Test and measuring Safety class: Class 1 - grounded product Pollution degree: 2 (as defined in IEC61010-1) Rated for indoor use only. 20 www.tektronix.com Datasheet Ordering information Models For each of the basic models, there are three required but exclusive model options that need to be specified at the time of order: M00, M01, and E1. Pricing varies based on chosen option. See the Instrument Options section for details. TSG4102A Analog signal generator with 2 GHz frequency coverage, basic model TSG4104A Analog signal generator with 4 GHz frequency coverage, basic model TSG4106A Analog signal generator with 6 GHz frequency coverage, basic model Standard accessories Accessory Description RF cable 1 meter, N-type to N-type RF cable Documentation CD All instrument models ship with a CD containing PDF files of user manuals in all available languages. Installation and Safety Instructions All instrument models ship with a printed Installation and Safety Instructions manual (multi-language: English and Russian). Calibration Statement of Calibration Power cord Country specific (see Power cord options) Warranty Three years Instrument options Hardware options (All regions except North America) Options M00 or M01 must be specified at the time of instrument order. M00 Instrument with oven-controlled crystal oscillator (OCXO) M01 Instrument with voltage-controlled crystal oscillator (VCXO) GPIB Adds GPIB interface Hardware options (North America only) Option E1 must be specified at the time of instrument order. E1 Instrument with oven-controlled crystal oscillator (OCXO) time-base and GPIB interface Hardware options (All regions) TSG4100A-RM1 Single rack mount kit (can be ordered separately) TSG4100A-RM2 Dual rack mount kit (can be ordered separately) TSG4100A-ATT 30 dB, 5 W RF attenuator up to 6 GHz D1 A list of performance verification test results www.tektronix.com 21 TSG4100A Series RF Vector Signal Generator Software options To upgrade to vector/digital modulation capability and/or add more modulation options after initial purchase, order "TSG4100A-UP + VM xx" instead of "TSG410xA VMxx". VM00 Basic vector modulation package with internal 6 MHz modulation bandwidth VM01 GSM modulation (requires Option VM00) VM02 GSM EDGE modulation (requires Option VM00) VM03 W-CDMA modulation (requires Option VM00) VM04 APCO-25 modulation (requires Option VM00) VM05 DECT modulation (requires Option VM00) VM06 NADC modulation (requires Option VM00) VM07 PDC modulation (requires Option VM00) VM08 TETRA modulation (requires Option VM00) VM10 Audio Clip (analog AM and FM) EIQ External 200 MHz modulation bandwidth (requires Option VM00) Power plug options Opt. A0 North America power plug (115 V, 60 Hz) Opt. A1 Universal Euro power plug (220 V, 50 Hz) Opt. A2 United Kingdom power plug (240 V, 50 Hz) Opt. A3 Australia power plug (240 V, 50 Hz) Opt. A5 Switzerland power plug (220 V, 50 Hz) Opt. A6 Japan power plug (100 V, 50/60 Hz) Opt. A10 China power plug (50 Hz) Opt. A11 India power plug (50 Hz) Opt. A12 Brazil power plug (60 Hz) Opt. A99 No power cord Language options Request the option below if you would like to order a printed verison of the English User Manual. (An electronic version of this manual is provided as a PDF on the CD that shipped with your instrument and is also available for download from the Tektronix Web site.) Opt. L0 English manual Service options Opt. C3 Calibration Service 3 Years Opt. C5 Calibration Service 5 Years Opt. D1 Calibration Data Report Opt. D3 Calibration Data Report 3 Years (with Opt. C3) Opt. D5 Calibration Data Report 5 Years (with Opt. C5) Opt. R5 Repair Service 5 Years (including warranty) 22 www.tektronix.com Datasheet Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar. Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats. Product Area Assessed: The planning, design/development and manufacture of electronic Test and Measurement instruments. www.tektronix.com 23 TSG4100A Series RF Vector Signal Generator ASEAN / Australasia (65) 6356 3900 Belgium 00800 2255 4835* Central East Europe and the Baltics +41 52 675 3777 Finland +41 52 675 3777 Hong Kong 400 820 5835 Japan 81 (3) 6714 3010 Middle East, Asia, and North Africa +41 52 675 3777 People's Republic of China 400 820 5835 Republic of Korea 001 800 8255 2835 Spain 00800 2255 4835* Taiwan 886 (2) 2656 6688 Austria 00800 2255 4835* Brazil +55 (11) 3759 7627 Central Europe & Greece +41 52 675 3777 France 00800 2255 4835* India 000 800 650 1835 Luxembourg +41 52 675 3777 The Netherlands 00800 2255 4835* Poland +41 52 675 3777 Russia & CIS +7 (495) 6647564 Sweden 00800 2255 4835* United Kingdom & Ireland 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Canada 1 800 833 9200 Denmark +45 80 88 1401 Germany 00800 2255 4835* Italy 00800 2255 4835* Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90 Norway 800 16098 Portugal 80 08 12370 South Africa +41 52 675 3777 Switzerland 00800 2255 4835* USA 1 800 833 9200 * European toll-free number. If not accessible, call: +41 52 675 3777 For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com. Copyright (c) Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. 23 Feb 2015 www.tektronix.com 37W-60043-0 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Tektronix: TSG4100A-UP-VM03 TSG4100A-UP-EIQ TSG4100A-UP-VM08 TSG-4100-RM2 TSG4100A-UP-VM01 TSG4100AUP-VM05 TSG4100A-UP-VM10 TSG4100A-UP-VM00 TSG4100A-UP-VM04 TSG4100A-UP-VM07 TSG-4100-ATT TSG4100A-UP-VM02 TSG-4100-RM1 TSG4100A-UP-VM06 Other: TSG-4102A TSG-4104A TSG-4106A