3MTM Round Conductor Flat Cable .025" 30 AWG Stranded, TPE 3756 Series * .025 inch wire spacing increases signal density * TPE insulation provides excellent transmission properties * 30 AWG stranded conductors on .025 inch wire spacing is designed for mass termination and flexibility * Meets the SCSI-3 characteristic impedance requirements * See Regulatory Classification note in Environmental section below. Date Modified: July 31, 2008 TS-0508-D Sheet 1 of 2 Physical Insulation: Material: Thermoplastic Elastomer (TPE) Color: Gray Marking: Standard: None Canadian Option: AWM 20297 105C 150V VW1 3M NU C AWM IA 105C 150V FT1 EU <50V Conductors: 30 AWG, 7x38 AWG [ 7 x o 0.102 ] Tinned Stranded Copper Electrical Canada: 150V EU: <50V Voltage Rating: USA: 150V 10 Insulation Resistance: > 1 x 10 /10 ft. [ 3m ] Balanced Characteristic Impedance: Unbalanced Capacitance: Inductance: Propagation Delay: Velocity of Propagation: 82 138 17.3 pF/ft [ 56.8 pF/m ] 10.0 pF/ft [ 32.8 pF/m ] 0.12 H/ft [ 0.38 H/m ] 0.19 H/ft [ 0.62 H/m ] 1.42 ns/ft [ 4.66 ns/m ] 1.38 ns/ft [ 4.53 ns/m ] 72% 74% Note: Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between signal conductors within a pair. Environmental Temperature Rating: -40C to +105C Flammability Rating: USA:VW-1 Canada:FT1 Regulatory Classification: EU: Not compliant, see RIA note E4 see RIA note C1 CN: Regulatory Information Appendix (RIA) attached UL File No.: E42769, Style No: 20297 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Round Conductor Flat Cable .025" 30 AWG Stranded, TPE 3756 Series Number of Conductors 3M Part Number Dimension A Dimension B 20 3756/20 0.500 .006 [ 12.70 ] 0.475 .004 [ 12.07 ] 26 3756/26 0.650 .006 [ 16.51 ] 0.625 .004 [ 15.88 ] 34 3756/34 0.850 .009 [ 21.59 ] 0.825 .006 [ 20.96 ] 36 3756/36 0.900 .009 [ 22.86 ] 0.875 .006 [ 22.23 ] 40 3756/40 1.000 .009 [ 25.40 ] 0.975 .006 [ 24.77 ] 50 3756/50 1.250 .009 [ 31.75 ] 1.225 .006 [ 31.12 ] 60 3756/60 1.500 .012 [ 38.10 ] 1.475 .009 [ 37.47 ] 68 3756/68 1.700 .012 [ 43.18 ] 1.675 .009 [ 42.55 ] 80 3756/80 2.000 .015 [ 50.80 ] 1.975 .011 [ 50.17 ] 100 3756/100 2.500 .015 [ 63.50 ] 2.475 .012 [ 62.87 ] C A B .025 .002 Typ [ 0.64 ] .013 .005 [ 0.33 ] .025 .003 [ 0.64 ] 30 AWG, 7 X 38 AWG ( 7 X o 0.102 ) Tinned Stranded Copper Conductors TPE Insulation Inch [mm] Tolerance Unless Noted Inch Note: 1. Blue marking on one edge of cable designates wire #1. .0 .00 .000 .1 .05 .010 [ ] Dimensions for Reference Only Ordering Information 3756/XX X00 XX Blank = Standard SF = Splice Free Blank = Standard C = Canadian Certified Version Length of Roll in Feet 100 = 100 ft Standard 300 = 300 ft Standard Note: Contact 3M for availability of additional conductor counts and/or custom roll lengths. Number of Conductors (See Table) TS-0508-D Sheet 2 of 2 3 Electronic Solutions Division Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC, as amended by EU Commission Decision 2005/717/EC, as amended by EU Court of Justice Decision 2008/C 116/04 This product contains decaBDE in the insulating material in excess of the maximum concentration allowed for finished products subject to EU RoHS that are placed on the EU market after June 30, 2008. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217B-E Appendix E5: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under Item 6 of the Annex to the Directive. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. RIA-2217B-E Appendix C3: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decaBDE); or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3m.com/interconnects Please recycle. Printed in USA. (c) 3M 2008. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.