KNOCKOUTS
WaNT Speed? Try The GreeNlee Speed pUNCh™ SySTem.
WaNT Self CeNTeriNG? SlUG SpliTTer / SlUG BUSTer® SC.
WaNT Size? larGe-diameTer STaiNleSS STeel KNOCKOUTS.
WaNT The WideST raNGe Of faST, reliaBle KNOCKOUTS?
Try GreeNlee.
Contents
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
www.greenlee.com
Speed Punch Knockouts 60
Electric & Battery-Powered Knockout Kits 62
Slug-Splitter SC Knockout Punches/Kits 64
Slug-Buster® Hydraulic Knockouts/Kits 66
Slug-Buster® Knockouts/Kits 72
Standard Hydraulic Knockout Kits 77
Standard Knockout Kits 79
Knockouts For Stainless Steel 82
Slug-Buster® Knockouts 84
Standard Knockouts 86
Special Application Punches 88
Knockout Parts Cabinets 91
Draw Studs For Knockouts 92
Stud Punches 96
C-Frame Punches 98
Manual Hydraulic Pumps 99
Hydraulic Pump Accessories 100
58
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Holemaking Selection Guide
SELECTION GUIDES
MATERIAL NUMBER
MATERIAL TYPE THICKNESS OF HOLES PRODUCTS APPLICATION CONSIDERATIONS PAGES
Steel 10GA Highest Slug-Splitter SC Punches Maximum durability and universal
material usage
64-67
Maximum hole size 2-3/8 inches
Speed Punch Punches Maximum hole size 2-3/8 inches 60-61
10GA High Slug-Buster® Punches Maximum hole size 2-3/8 inches 68-80
10GA High Standard Punches Maximum hole size 6-3/8 inches 81-87
10GA Medium-High Ultra Cutters Maximum hole size 2-1/2 inches 120
8GA High Carbide-Tipped Hole Cutters Maximum hole size 2-1/2 inches 119
10GA Medium-High Step Bits Maximum hole size 1-3/8 inches 104-105
10GA Medium Hole Saws Maximum hole size 6 inches 121-122
Stainless Steel 10GA Highest Slug-Splitter SC Punches Maximum durability and universal
material usage
64-67
10GA Highest Lrg. Dia. Punches for Stainless Hole size 2-1/2 – 4 inches 67
9GA Medium-High Quick Change Carbide-
Tipped Cutter
Maximum hole size 3 inches, quick change cutting
heads
118
8GA Medium-High Carbide-Tipped Hole Cutters Maximum hole size 2-1/2 inches 119
Wood 18" High Nail Eater® RT Cuts through nails, good chip removal, max hole
size 1 inches
106
18" High Nail Eater II® Bits Cuts through nails, good chip removal, max hole
size 1-1/4 inches
107
2–2 x 4’s High E-Z Bore® Bits Self feed screw for hard or soft woods, max hole
size 4-5/8 inches
110
2 x 4 High Step Bits Maximum hole size 1-3/8 inches, low chip removal 104-105
16" Medium Spade Bits Maximum hole size 1-1/2 inches 111-112
1-5/8" or 2 x 4 High Hole Saws Maximum hole size 6 inches 121-122
Aluminum 10GA Highest Slug-Splitter SC Punches Maximum durability and universal material usage 64-67
Maximum hole size 2-3/8 inches
Speed Punch Punches Maximum hole size 2-3/8 inches 60-61
10GA High Slug-Buster® Punches Maximum hole size 2-3/8 inches 68-80
10GA High Standard Punches Maximum hole size 6-3/8 inches 81-87
10GA High Ultra Cutters Maximum hole size 2-1/2 inches 120
10GA High Step Bits Maximum hole size 1-3/8 inches 104-105
10GA Medium Hole Saws Maximum hole size 6 inches 121-122
Fiberglass/Plastic approx. 1/8" Highest Slug-Splitter SC Punches Maximum durability and universal material usage
Maximum hole size 2-3/8 inches
64-67
Speed Punch Punches Maximum hole size 2-3/8 inches 60-61
approx. 1/8" High Slug-Buster® Punches Maximum hole size 2-3/8 inches 68-80
approx. 1/8" High Standard Punches Maximum hole size 6-3/8 inches 81-87
High Ultra Cutters Maximum hole size 2-1/2 inches 120
Medium-High Step Bits Maximum hole size 1-3/8 inches 104-105
1-5/8" Medium Hole Saws Maximum hole size 6 inches 121-122
Drywall/Ceiling Tile 7/8" High Recessed Light Hole Saws Replaceable blades 126
7/8" Medium-Low Quick Cutter Adjustable or fixed, sprinkler heads or lighting 126
7/8" Medium Keyhole Saw Non-round holes 131
Quazite®* Enclosures High Slug-Buster® Punches 68-80
approx. 1/8" High Carbide-Grit Hole Saws 123
Cement Board/Hardy Board Siding High Carbide-Grit Hole Saws 123
Existing Wall D’versibits®Remodeling, phone, cable, alarm installation 113-117
Non-Round Hole High Non-Round Punches Square, rectangular, electronic connector holes 88-90
Medium Reciprocating Blades 128-129
Metric & Non-Conduit Sizes 16-10GA High Standard Punches 81-87
Metal Studs 20GA Stud Punches 96-97
59
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
DRIVER TYPE DESCRIPTION AVAILABLE DRIVER KITS PAGES
Battery-Powered Driver
(18V Li-Ion Battery)
Punch holes from any angle with the 360° rotating head.
Punches up to 6" holes in 14 gauge mild steel and 2" holes in 14 gauge
stainless steel.
Slim, compact and lightweight design for reduced fatigue and easy control.
Automatic retraction prevents damage to punch and die.
One trigger controls all tool functions, no additional manual work required.
LED light illuminates dark work areas.
Driver with Speed Punch Punches 60-61
Driver Only and Driver with
Slug-Buster® Punches
62-63
Battery-Powered or
Corded Hydraulic Driver
(18V Li-Ion Battery or
120VAC Adapter)
Develops 6.7 tons of hydraulic force.
Available with a choice of three battery chargers – 120V.
Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Speed
Punch, Slug-Buster® and standard knockout punches and 12 gauge
(2.5 mm) stainless steel with Greenlee Slug-Splitter SC
knockout punches.
Driver Only and Driver with
Slug-Buster® Punches
62-63
Hand Pump Hydraulic
Driver with Ram
Foot operation frees both hands to operate punch.
Powerful hydraulic ram develops 11 tons of hydraulic force.
Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Speed
Punch, Slug-Buster® and standard knockout punches and 10 gauge
(3.5 mm) stainless steel with Greenlee Slug-Splitter SC
knockout punches.
Driver with Slug-Buster®
SC Punches
64-65
Driver Only and Driver with
Slug-Buster® Punches
68-69
Driver with Standard Punches 81-82
Foot Pump Hydraulic
Driver with Ram
Powerful hydraulic ram develops 11 tons of hydraulic force.
Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Speed
Punch, Slug-Buster® and standard knockout punches and 10 gauge
(3.5 mm) stainless steel with Greenlee Slug-Splitter SC
knockout punches.
Driver Only and Driver with
Slug-Buster ® Punches
70-71
Quick Draw® Hydraulic
Driver
Quick Draw driver is perfect for
fast, straight-on panel punching.
Develops 8 tons of hydraulic force
for easy punching.
Punches up through 10 gauge
(3.5 mm) mild steel with Greenlee
Speed Punch, Slug-Buster®
and standard knockout punches
and 10 gauge (3.5 mm) stainless
steel with Greenlee Slug-Splitter
SC knockout punches.
Quick Draw 90®
Hydraulic Driver
Quick Draw 90 right-angle design
allows greater versatility in tight
spaces.
Driver with Speed Punch Punches 60-61
Driver Only and Driver with
Slug-Buster ® Punches
72-73
Quick Draw® Flex
Hydraulic Driver
Quick Draw Flex allows unlimited
driver orientation.
High Leverage Ratchet
Driver
Time saving ball bearing head punches faster than wrench method.
Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Speed
Punch, Slug-Buster® and standard knockout punches and 16 gauge
(1.5 mm) stainless steel with Greenlee Slug-Splitter SC
knockout punches.
Driver Only and Driver with
Slug-Buster ® Punches
74
Manual Ratchet
Driver
Unique punch profile splits slugs allowing easy slug removal.
1" Hex Ratchet Wrench allows use with both 3/8" (19.1 mm) and 3/4"
(9.5 mm) draw studs.
Slug-Buster® Punches available in sizes up thru 2.52" (64.0 mm).
Standard round punches available up to 5 5/8" (144.1 mm).
Driver with Slug-Buster ® Punches 75
Driver with Slug-Buster ®
Metric Punches
77
Driver with Standard
Metric Punches
85
DRIVER TYPE DRIVE METHOD CAPACITY SIZE RANGE AVAILABLE PAGES
Speed PunchTM Hydraulic or Battery Mild steel
up thru 10 gauge (3.5 mm)
1.115" through 2.416" dia. (28.3 mm
through 61.4 mm)
60-61
Slug-Splitter&
Slug-Splitter SC
Ratchet, Hydraulic or Battery Stainless steel or mild steel
up thru 10 gauge (3.5 mm)
.598" through 2.526" dia. (15.2 mm
through 64 mm)
64-67
Slug-Buster® &
Slug-Buster SC®
Manual, Ratchet, Hydraulic or Battery Mild steel
up thru 10 gauge (3.5 mm)
.492" through 2.52" dia. (12.5 mm
through 64.0 mm)
68-80
Standard Round Manual, Ratchet, Hydraulic or Battery Mild steel up thru 10 gauge
(3.5 mm)
.500" through 6.375" dia. (12.7
through 161.9 mm)
81-87
Knockout Punch Driver Selection Guide
Knockout Punch Selection Guide
60
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
SPEED PUNCHKNOCKOUTS
Speed Punch Knockout System
Punch up to 10 gauge mild steel, aluminum, fiberglass or plastic.
Use with hydraulic and battery-powered drivers.
Available in 3/4” - 2” conduit sizes and three kit configurations.
SPECIFICATIONS
Capacity Mild steel up through 10 gauge (3.5 mm)
Application Mild steel, fiberglass and plastic enclosures.
Hole Sizes Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example: 3/4"
conduit size actually makes a 1-3/32" hole.
Pg Sizes - European standard pipe sizes.
ISO Sizes - International Standards Organization pipe sizes.
Operation Operate with battery, hydraulic driver only.
It’s as simple as:
Slide die and punch onto draw stud:
“No-thread” design eliminates cross-
threading.
Secure SPEED LOCK onto draw stud:
Faster setup and disassembly.
Punch hole: Save time and money with every
punch!
23
SECURE PUNCH
SLIDE
1
* Compared to standard
threaded punch & draw stud
set-up and disassembly.
From the leaders in knockout technology comes the new SPEED PUNCH System.
The patent pending “no-thread” design eliminates cross-threading, while the
innovative SPEED LOCK mechanism quickly secures the punch in place. This
means longer tool life and faster punches, saving you time and money on the job.
SPEED PUNCH is available in 3/4” - 2” conduit sizes and three kit configurations.
SAVE TIME AND MONEY WITH
EVERY PUNCH!
“No-thread” punch design quickly and easily slides on/
off draw stud: The fastest punch system on the market today.
a prOdUCT videO iS
availaBle, SCaN ThiS Qr
COde Or viSiT:
www.youtube.com/GreenleeDEMO
61
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Speed Punch Knockout System
*For use with 746 Hydrauluc RAM
LS50L11SP 7906SBSP 7905SBSP
CAT. NO. UPC NO. DESCRIPTION
HOLE SIZE CAPACITY
MILD STEEL
CONDUIT &
PIPE SIZE
ACTUAL LS50L11SP/
01081
7906SBSP/
09278
7905SBSP/
01081
Ø INCH Ø MM GA MM
7212SP-3/4P 00952 Punch, 3/4" Conduit, Speed
Punch
3/4" -1.115 28.3 10 3.5
7212SP-1P 00953 Punch, 1" Conduit, Speed
Punch
1" -1.362 34.6 10 3.5
7212SP-1-1/4P 00955 Punch, 1-1/4" Conduit,
Speed Punch
1-1/4" 1-11/16" 1.701 43.2 10 3.5
7212SP-1-1/2P 09282 Punch, 1-1/2" Conduit,
Speed Punch
1-1/2" 1-15/16" 1.951 49.6 10 3.5
7212SP-2P 09283 Punch, 2" Conduit, Speed
Punch
2" 2-3/8" 2.416 61.5 10 3.5
7212SP-3/4D 09279 Die, 3/4" Conduit, Speed
Punch
3/4" -1.115 28.3 10 3.5
7212SP-1D 09280 Die, 1" Conduit, Speed
Punch
1" -1.362 34.6 10 3.5
7212SP-1-1/4D 09281 Die, 1-1/4" Conduit, Speed
Punch
1-1/4" 1-11/16" 1.701 43.2 10 3.5
7212SP-1-1/2D 00956 Die, 1-1/2" Conduit, Speed
Punch
1-1/2" 1-15/16" 1.951 49.6 10 3.5
7212SP-2D 00957 Die, 2" Conduit, Speed
Punch
2" 2-3/8" 2.416 61.5 10 3.5
SP-LOCK 09277 Speed Lock
7212SP11 10002 Draw Stud, 3/4" X 4.77",
Speed Punch
7212SP12*00979 Draw Stud, 3/4" X 5.63",
Speed Punch
34403 34403 Kwik-Stepper #3 Step Bit
- - Plastic Case
33786 33786 Quick Draw 90 Punch
Driver
52178 52178 120V Charger
52177 52177 18V 1.5 Ah Li-Ion Battery
LS50LB 01131 LS50 Punch Driver and
Case Only (No Battery,
Charger, or accessories)
KK50LFLEX 00185 LS50 Plastic Case Only
62
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
ELECTRIC & BATTERY-POWERED KNOCKOUT KITS
CAT. NO. UPC NO. DESCRIPTION
LS50L11A 04951 Punching Tool Kit Includes: LS50L Battery Driver,
(1) 18V Li-ion Battery, (1) 120V Battery Charger, (1) Spacer
(1924AA), (1) 3/4-16 x 4 Drawstud (31872). (1) 3/8 x 4.8
Drawstud (209633)
LS50L11B 04956 Punching Tool Kit Includes: LS50L Battery Driver,
(1) 18V Li-ion Battery, (1) 120V Battery Charger, (1) Spacer
(1924AA), (1) 3/4-16 x 4 Drawstud (31872). (1) 3/8 x 4.8
Drawstud (209633), Slugbuster punches and dies for (1/2,
3/4, 1, 1-1/4, 1 1/2” and 2”) conduit
LS50LB 01131 LS50 punch driver and case only (no battery, charger, or
accessories).
• Punch holes from any angle with the 360° rotating head.
• Punches up to 6" holes in 14 gauge mild steel and 2" holes in 14 gauge
stainless steel.
• Slim, compact and lightweight design for reduced fatigue and easy control.
• Automatic retraction prevents damage to punch and die.
• One trigger controls all tool functions, no additional manual work required.
• Non-slip rubber grip for firm and comfortable hold.
• LED light illuminates dark work areas.
SPECIFICATIONS
Weight (driver with battery) 5.05 lbs (2.29kg)
Maximum Punch Force 6 Tons (60kN)
Charging Time 22 min (RAL2/BL1380) or 15 min (RAL1/BL1815)
Battery Voltage 18V
Battery-Powered Knockout Punch Driver Kits Parts List
LS50L Battery-Powered Knockout Punch Driver
HOLE SIZE KIT CAT./UPC NO.
CONDUIT LS50L11A LS50L11B
& PIPE ACTUAL LS60LA11 LS60LB11
CAT NO. UPC NO. DESCRIPTION SIZE Ø INCH Ø MM LS60LA120 LS60LB120
PUNCHES
AND DIES
721-1/2 31756 1/2" Conduit Size Slug-Buster® Punch 1/2" 7/8 0.885 22.5
14722 14722 1/2" Conduit Size Die 1/2" 7/8 0.885 22.5
721-3/4 31757 3/4" Conduit Size Slug-Buster® Punch 3/4" 1.115 28.3
124AV 06972 3/4" Conduit Size Die 3/4" 1.115 28.3
721-1 31758 1" Conduit Size Slug-Buster® Punch 1" 1.362 34.6
126AV 04011 1" Conduit Size Die 1" 1.362 34.6
721-1-1/4 31759 1-1/4" Conduit Size Slug-Buster® Punch 1-1/4" 1-11/16 1.701 43.2
128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2
721-1-1/2 31760 1-1/2" Conduit Size Slug-Buster® Punch 1-1/2" 1-15/16 1.951 49.6
440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6
721-2 31761 2" Conduit Size Slug-Buster® Punch 2" 2-3/8 2.416 61.5
442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5
DRAW STUDS
AND MISC.
1614SS 30043 Draw Stud - 3/8" x 2-13/16"
31872 31872 Draw Stud - 3/4" x 4-1/8"
1924AA 03248 Spacer Short
33967 33967 Stud Adapter - 3/8"
B
BARE
TOOL
AVAILABLE AS
a prOdUCT videO iS
availaBle, SCaN ThiS Qr
COde Or viSiT:
www.youtube.com/GreenleeDEMO
63
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
LS60L Battery-Powered Knockout Punch Driver Kits
10 GA. (0.1345" [3.5 mm]) MILD STEEL 10 GA. (0.1345" [3.5 mm]) STAINLESS STEEL
16 GA. (0.0598" [1.5 mm]) MILD STEEL AND 1/8" ALUMINUM12 GA. (0.1046" [2.5 mm]) STAINLESS STEEL
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• LED light provides the operator with the battery charge and tool
maintenance status.
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Punching cycle stops automatically when hole is complete to prevent
damage to punch
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered punching tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V battery charger or with 120V corded adapter in place
of batteries and charger
SPECIFICATIONS
Weight (driver with battery only) 8.8 lbs. (4.0 kg)
Overall Length (ram
retracted)
11.5 in. (292 mm)
Height 12.5 in. (318 mm)
Maximum Punch Force 6.7 tons (60 kN)
Maximum Round Punch Size
(in 10 gauge mild steel)
2.42 in. dia. (61.5 mm dia)
Maximum Square Punch Size
(in 10 gauge mild steel)
2-11/16 in. x 2-11/16 in. (68.0 x 68.0 mm)
Maximum Rectangular Punch
Size (in 10 gauge mild steel)
1.378 x 2.559 in. (35.0 x 65.0 mm)
Maximum Ram Travel 0.87 in (22 mm)
Charging Time Approximately 1 hour
Battery Voltage 18 V, 3.0Ah, Li-ion
LS60LA11
See kit contents on page 62.
CAT. NO. UPC NO. DESCRIPTION
LS60L A11 52155 Battery Punch Driver -120 Volt Charger
LS60LB11 52158 Battery Punch Driver -120 Volt Charger
LS60L A120 52161 Punch Driver - 120 Volt AC Adapter
LS60LB120 52163 Punch Driver - 120 Volt AC Adapter
KKLS60LGL 25749 Carry Case
52176 52176 18V, 3.0Ah, Li-ion Battery
12274 12274 Strap
52178 52178 120V Charger
52179 52179 230V Charger
52180 52180 12V Charger
STEEL CAPACITIES FOR CONDUIT SIZES
STANDARD PUNCHES AND SLUG-BUSTER®SLUG-SPLITTER SC
1/2" 3/4" 1-7/32" 1" 1-1/4" 1-1/2" 2" 1/2" 3/4" 1-7/32" 1" 1-1/4" 1-1/2" 2"
COND. COND. COND.. COND. COND. COND. COND. COND. COND. COND. COND. COND. COND.
STUD AND Ø 0.885" Ø 1.115" Ø 1.210" Ø 1.362" Ø 1.701" Ø 1.951 Ø 2.415" Ø 0.885" Ø 1.115" Ø 1.210" Ø 1.362" Ø 1.701" Ø 1.951" Ø 2.416"
ACCESSORIES 22.5MM 28.3MM 30.5MM 34.6MM 43.2MM 49.6MM 61.5MM 22.5MM 28.3MM 30.5MM 34.6MM 43.2MM 49.6MM 61.5MM
1614SS Draw Stud
1924AA Spacer
33967 Adapter
1924AA Spacer
29451 7/16" Draw Stud
1924AA Spacer
31872 3/4" Draw Stud
31872 3/4" Draw Stud
33967 Adapter
1
29451 sold separately. See page 94 for ordering information.
Electronic Connector Punches
RS-232, 229, 231, 234, 238
1
64
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Slug-Splitter SC Ram and Hand Pump Hydraulic Driver Punch Kits
SLUG-SPLITTER SC KNOCKOUT KITS
7506 Punch Kit
744 Punch Kit
(driver not included)
7307 Punch Kit
(driver not included) NOTE: See Slug-Splitter SC knockout punch units on pages 82-83 for list of individual punches, dies and draw studs.
SPECIFICATIONS
Operation 7307/29528 - Quick Draw®, Quick Draw 90® and Quick Draw® Flex Hydraulic Drivers,
Battery-Powered Drivers, 7646 and 7625 Ram-Type Drivers.
744/29619 - Quick Draw®, Quick Draw 90® and Quick Draw® Flex Hydraulic Drivers,
Battery-Powered Drivers, 7646 and 7625 Ram-Type Drivers.
7506/30385 - Hydraulic Ram and Hand Pump included.
All Kits Feature:
Slug-Splitter SC (Self Centering) knockout punches with capacities up through 10
gauge (3.5 mm) stainless steel. Refer to individual punch capacity ratings.
Self-centering punch aligns itself on pilot hole. (Slug-Splitter SC)
No need to draw crosshairs or line up die alignment marks. (Slug-Splitter SC)
7506 Kit Features
Fast, easy and simple to operate.
Compact design makes this a perfect choice for use on construction sites and
maintenance jobs.
Will also drive 751 Cable Cutter head.
Powerful 11-ton hydraulic ram.
3-foot hose.
Designed for
stainless steel
applications
WEIGHT
CAT. NO. UPC NO. DESCRIPTION LBS. KG.
744 29619 1/2” through 1-1/4” Conduit Size Slug-Splitter SC Knockout
Punch Kit
52.3
7307 29528 1/2” through 2” Conduit Size Slug-Splitter SC
Knockout Punch Kit
10.4 4.7
7506 30385 1/2” through 2” Conduit Size Slug-Splitter SC
Knockout Punch Kit with Hydraulic Ram and Hand Pump
32 14.5
65
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
HOLE SIZE CAPACITY KIT CAT./UPC NO.
CONDUIT & ACTUAL STAINLESS STEEL 744/ 7307/ 7506/
CAT. NO. UPC NO. DESCRIPTION PIPE SIZE Ø INCH Ø MM GA MM 29619 29528 30385
28154 28154 1/2" Conduit Size Punch 1/2" 7/8 .885 22.5 10 3.5 ✓✓✓
28155 28155 1/2" Conduit Size Die 1/2" 7/8 .885 22.5 10 3.5
28156 28156 3/4" Conduit Size Punch 3/4" 1.115 28.3 10 3.5 ✓✓✓
28157 28157 3/4" Conduit Size Die 3/4" 1.115 28.3 10 3.5 ✓✓✓
36490 36490 1-7/32" Punch Oiltight 1-7/32 1.210 30.5 10 3.5
36489 36489 1-7/32" Die Oiltight 1-7/32 1.210 30.5 10 3.5
28158 28158 1" Conduit Size Punch 1" 1-11/32 1.362 34.6 10 3.5 ✓✓✓
28159 28159 1" Conduit Size Die 1" 1-11/32 1.362 34.6 10 3.5 ✓✓✓
28160 28160 1-1/4" Conduit Size Punch 1-1/4" 1-11/16 1.701 43.2 10 3.5 ✓✓✓
28161 28161 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 10 3.5 ✓✓✓
28162 28162 1-1/2" Conduit Size Punch 1-1/2" 1-15/16 1.951 49.6 10 3.5
28163 28163 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 10 3.5
28165 28165 2" Conduit Size Punch 2" 2-3/8 2.416 61.5 10 3.5
28166 28166 2" Conduit Size Die 2" 2-3/8 2.416 61.5 10 3.5
29451 29451 7/16" x 4-1/4" Draw Stud ✓✓✓
29452 29452 3/4" x 5-1/2" Draw Stud ✓✓✓
29529 29529 Metal Case
19193 19193 Metal Case
31068 31068 Metal Case
746SS 30387 Ram (includes 1 each of the fol-
lowing 3 items)
54167 54167 1/4" Female Coupler
54168 54168 Dust Plug
15908 15908 Spacer Group (includes 1 each
of the following 3 items)
1924AA 03248 Spacer-Short
1925A A 03249 Spacer-Medium
1926A A 06904 Spacer-Long
767 13284 Hydraulic Hand Pump
38316 38316 High Pressure Hose Unit–1/4"
x 3' (includes 1 each of the fol-
lowing 3 items)
54169 54169 1/4" Male Coupler
54170 54170 Dust Cap
06302 06302 High Pressure Hose–1/4" x 3'
66
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Slug is split in half as
punching operation is
completed.
Split slugs fall free
from the die and stud.
Unique Slug-Splitter
SC
punch design
creases slug as the
punch is drawn into
the die.
KNOCKOUTS fOR STAINLESS STEEL
Slug-Splitter SC and Slug-Splitter Knockout Punches
Slug-Splitter SC heavy-duty punches are designed to punch up through
10 gauge (3.5 mm) stainless steel.
Unique slug-splitting design and tool steel construction easily punch
10 gauge (3.5 mm) mild steel and stainless steel.
Self-centering punch aligns itself on pilot hole. (Slug-Splitter SC)
No need to draw crosshairs or line up die alignment marks.
(Slug-Splitter SC)
Unique punch profile also splits slugs for easier slug removal.
Heavy-duty dies and stainless steel draw studs for longer life.
Excellent abrasion resistance for punching fiberglass and plastic.
Slug-Splitter SCpunch units consist of: punch, die and draw stud.
Check individual punch for specific capacity.
Patent Pending for Self-centering Slug-Splitter SC.
SPECIFICATIONS
Capacity Stainless steel up through 10 gauge (3.5 mm)
Application 10-gauge stainless steel, mild steel, fiberglass and plastic enclosures.
Hole Sizes Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example:
1/2" conduit size actually makes a 7/8" hole.
Pg Sizes - European standard pipe sizes.
ISO Sizes - International Standards Organization pipe sizes.
Operation Operate with battery, hydraulic or high leverage ratchet driver only.
SELF CENTERING – SLUG-SPLITTER SC KNOCKOUT PUNCHES 0.885" TO 2.416"
HOLE SIZE CAPACITY DRAW STUDS
PUNCH DIE CONDUIT ACTUAL STAINLESS STEEL HYDRAULIC DRIVERS RATCHET DRIVER
CAT./UPC NO. CAT/UPC NO & PIPE Ø (INCH) Ø (MM) PG ISO GA. (MM) 7804/7904 7646/7625 1904
28154 28155 1/2" 7/8 0.885 22.5 16 - 10 3.5 29451 29451 30227
28156 28157 3/4" - 1.115 28.3 21 - 10 3.5 31872 29452 12099
36490 36489 - 1-7/32 1.210 30.5 - - 10 3.5 31872 29452 12099
28158 28159 1" 1-11/32 1.352 34.6 - - 10 3.5 31872 29452 12099
28160 28161 1-1/4" 1-11/16 1.701 43.2 - - 10 3.5 31872 29452 12099
28162 28163 1-1/2" 1-15/16 1.951 49.6 - - 10 3.5 - 29452 12099
28165 28166 2" 2-3/8 2.416 61.5 - - 10 3.5 - 29452 12099
STANDARD – SLUG-SPLITTER KNOCKOUT PUNCHES 0.598" TO 2.520"
31117 31126 - - 0.598 15.2 9 - 12 2.5 29451 29451 30227
04599 04598 - - 0.638 16.2 - 16 12 2.5 29451 29451 30227
31119 31128 - - 0.732 18.6 11 - 12 2.5 29451 29451 30227
31120 31129 - - 0.803 20.4 13 20 12 2.5 29451 29451 30227
04602 04601 - 1 1.000 25.4 - 25 10 3.5 31872 29451 30227
04605 04603 - - 1.280 32.5 - 32 10 3.5 31872 29452 12099
31122 31135 - - 1.457 37.0 29 - 10 3.5 31872 29452 12099
04608 04607 - - 1.595 40.5 - 40 10 3.5 31872 29452 12099
31123 31131 - - 1.850 47.0 36 - 10 3.5 - 29452 12099
04611 04609 - 2 2.000 50.8 - 50 10 3.5 - 29452 12099
31124 31132 - 2 1/8 2.125 54.0 42 - 10 3.5 - 29452 12099
31125 31133 - - 2.362 60.0 48 - 10 3.5 - 29452 12099
04614 04613 - - 2.520 64.0 - 63 10 3.5 - 29452 12099
* 16 ga. stainless steel capacity with ratchet driver.
67
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
PUNCH UNITS
* Battery-Powered or Corded Knockout Punch Driver
SELF CENTERING – SLUG-SPLITTER SC KNOCKOUT PUNCHES 0.885" TO 2.416"
PUNCH UNIT - INCLUDES CAPACITY
PUNCH, DIE & DRAW HOLE SIZE STAINLESS STEEL WEIGHT DRIVER DRAW
STUD
CONDUIT &
CATALOG NO. UPC NO PIPE SIZE IN MM GA MM LBS. KG 1904 7804/7904 LS60* 7646/7625
745R-1/2 30384 1/2" 7/8 22.5 16 1.5 .6 .27 x30227
745H-1/2 29560 1/2" 7/8 22.5 10 3.5 .7 .32 x x x 29451
740H-1-7/32
Oil Tight
29563 -1-7/32 30.5 10 3.5 1.2 .54 x x x 29452
745H-3/4 12318 3/4" 1-3/32 28.3 10 3.5 1.26 .57 x29452
745H-1 12319 1" 1-11/32 34.6 10 3.5 1.51 .68 x29452
745H-1-1/4 12320 1-1/4" 1-11/16 43.2 10 3.5 1.96 .89 x29452
745H-1-1/2 12321 1-1/2" 1-15/16 49.6 10 3.5 2.49 1.13 x29452
745H-2 12322 2" 2-3/8 61.5 10 3.5 3.69 1.67 x29452
STANDARD – SLUG-SPLITTER KNOCKOUT PUNCHES 0.598" TO 2.520"
745M-15.2 12323 -0.598 15.2 12 2.5 .98 .44 x29451
745M-16.2 12324 -0.638 16.2 12 2.5 .97 .44 x29451
745M-18.6 12325 -0.732 18.6 12 2.5 .98 .45 x29451
745M-20.4 12326 -0.803 20.4 12 2.5 .96 .44 x29451
745M-25.4 12317 -1.000 25.4 10 3.5 1.05 .48 x29451
745M-32.5 12327 -1.280 32.5 10 3.5 1.53 .69 x29452
745M-37 12328 -1.457 37 10 3.5 1.68 .76 x29452
745M-40.5 12329 -1.595 40.5 10 3.5 1.83 .83 x29452
745M-47 12330 -1.850 47 10 3.5 2.3 1.04 x29452
745M-50.8 12331 -2.000 50.8 10 3.5 2.91 1.32 x29452
745M-54 12332 -2.125 54 10 3.5 2.90 1.31 x29452
745M-60 12333 -2.362 60 10 3.5 3.63 1.65 x29452
745M-64 12334 -2.520 64 10 3.5 3.87 1.75 x29452
CAT NO. UPC NO. DESCRIPTION
7308 06176 Kit Includes: Punches and Dies for 2-1/2", 3" & 4"
Conduit, Draw Stud (29452), Sleeve (1557SS) and
Case
745H-2-1/2 06183 Punch Unit for 2-1/2" Conduit Includes: Punch, Die
& Draw Stud (29452)
745H-3 06190 Punch Unit for 3" Conduit Includes: Punch, Die &
Draw Stud (29452)
745H-3-1/2 06206 Punch Unit for 3-1/2" Conduit Includes: Punch, Die
& Draw Stud (29452)
745H-4 06213 Punch Unit for 4" Conduit Includes: Punch, Die &
Draw Stud (29452)
1557SS 00785 Hydraulic Punch Sleeve (SS)
00622 00622 2-1/2" Replacement Punch
00626 00626 2-1/2" Replacement Die
00623 00623 3" Replacement Punch
00627 00627 3" Replacement Die
00624 00624 3-1/2" Replacement Punch
00629 00629 3-1/2" Replacement Die
00625 00625 4" Replacement Punch
00630 00630 4" Replacement Die
Large Diameter Knockouts for Stainless Steel
• Makes clean & accurate holes.
• For conduit sizes 2-1/2”, 3”, 3-1/2” & 4”.
• Rated for punching in up to 10 gauge stainless steel.
• Excellent abrasion resistance for punching fiberglass
and plastic.
• Kit includes punches, dies, draw stud and sleeve.
• High-Impact, rugged plastic carrying case (kit only).
7308
Slug-Splitter SC and Slug-Splitter Knockout Punches
68
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Slug-Buster® Ram and Hand Pump Kits (Inch and Metric)
A
B
FGH
J
L
M
N
R
IK
A
B
FGH
L
R
M
N
K J I
Fast, easy and simple to operate.
Compact design for field use on construction sites
and maintenance jobs.
Punches 10 times faster than wrench method.
Will also drive 751 Cable Cutter head.
Can be used with most standard round Slug-Buster®
and Slug-Splitter SC punches (not 1/2", 9/16", 5/8").
Can be used with non-round punches
(adapter may be required).
3-foot hose
Powerful 11-ton hydraulic ram.
7310SB
RAM AND HAND PUMP HYDRAULIC DRIVER PARTS IDENTIFICATION
KEY CAT. NO. UPC NO. DESCRIPTION
A746 17091 Ram (includes Item B)
B2113B 10109 Draw Stud3/4” x 5 3/8
F1557A A 03170 Punch Sleeve
G20963 20963 Draw Stud3/8” x 4.8”
H15908 Spacer Group (includes Items I, J and K)
I1924AA 03248 Spacer-Short
J1925AA 03249 Spacer-Medium
K1926AA 06904 Spacer-Long
L34410 Kwik Stepper® Step Bit 1/2”
M767 13284 Hydraulic Hand Pump
N06302 06302 High Pressure Hose–1/4” x 3’
R30206 Plastic Case
10 GA. MILD STEEL
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
7646 15906 Driver with Hand Pump, Draw Studs, Spacer and
Plastic Case
20 9.1
7306SB 34360 Driver, Hand Pump, Slug-Buster® Punches, Dies and
Draw Studs for 1/2” through 2” Conduit, Adapter,
Spacers, Kwik Stepper® Step Bit and Plastic Case
24 10.9
7310SB 34361 Driver, Hand Pump, Slug-Buster® Punches,Dies and
Draw Studs for 1/2” through 2” and 2-1/2” through 4”
Standard Conduit Size Punches, Dies and Draw Studs,
Adapter, Spacers, Kwik Stepper® Step Bit and Plastic
Case
54 24.5
7646Pg-SB 32799 Metric – Driver, Slug-Buster® Pg Punches, Dies and
Draw Studs for 15.2 mm through 60.0 mm, Adapter,
Spacers, Kwik Stepper® Step Bit and Plastic Case
24 10.9
38520 38520 Driver, Hand Pump, Slug-Buster® Punches and Draw
Studs for 1/2” through 3” and 4” Conduit, Adapter,
Spacers, Kwik Stepper® Step Bit and Plastic Case
48 21.8
STEEL CAPACITIES FOR CONDUIT SIZES
STANDARD PUNCHES AND SLUG-BUSTER®
REQUIRED DRAW STUD
AND ACCESSORIES 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"
3/4" Stud (2113B),
3/8" Stud (20963) & Spacers
3/4" Stud (2113B),
Long Spacer
3/4" Stud (2113B),
Short Spacer
3/4" Stud (2113B)
3/4" Stud (2113B),
& Sleeve (03170)
SLUG-BUSTER® HYDRAULIC KNOCKOUT KITS
69
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Slug-Buster® Ram and Hand Pump Kits Parts List
HOLE SIZE KIT CAT./UPC NO.
CAT NO. UPC NO. DESCRIPTION
CONDUIT
& PIPE
SIZE
ACTUAL 7646/
15906
7306SB/
34360
7310SB/
34361
7646PGSB/
32799 38520
Ø INCH Ø MM
PUNCHES AND DIES
721-1/2 31756 1/2" Conduit Size Slug-Buster® Punch 1/2" 7/8 0.885 22.5 1 1 1 1
14722 14722 1/2" Conduit Size Die 1/2" 7/8 0.885 22.5 1 1 1 1
721-3/4 31757 3/4" Conduit Size Slug-Buster® Punch 3/4" 1.115 28.3 1 1 1
124AV 06972 3/4" Conduit Size Die 3/4" 1.115 28.3 1 1 1
721-1 31758 1" Conduit Size Slug-Buster® Punch 1" 1.362 34.6 1 1 1
126AV 04011 1" Conduit Size Die 1" 1.362 34.6 1 1 1
721-1-1/4 31759 1-1/4" Conduit Size Slug-Buster® Punch 1-1/4" 1-11/16 1.701 43.2 1 1 1
128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 1 1 1
721-1-1/2 31760 1-1/2" Conduit Size Slug-Buster® Punch 1-1/2" 1-15/16 1.951 49.6 1 1 1
440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 1 1 1
721-2 31761 2" Conduit Size Slug-Buster® Punch 2" 2-3/8 2.416 61.5 1 1 1
442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 1 1 1
1429AV 04175 2-1/2" Conduit Size Punch 2-1/2" 2-7/8 2.914 74.0 1 1
1430AV 04177 2-1/2" Conduit Size Die 2-1/2" 2-7/8 2.914 74.0 1 1
1431AV 04180 3" Conduit Size Punch 3" 3-1/2 3.539 89.9 1 1
1432AV 04183 3" Conduit Size Die 3" 3-1/2 3.539 89.9 1 1
2982AV 04653 3-1/2" Conduit Size Punch 3-1/2" 44.044 102.7 1
2981AV 04652 3-1/2" Conduit Size Die 3-1/2" 44.044 102.7 1
2984AV 04655 4" Conduit Size Punch 4" 4-1/2 4.544 115.4 1 1
2983AV 04654 4" Conduit Size Die 4" 4-1/2 4.544 115.4 1 1
31969 31969 Pg-9 Slug-Buster® Punch 0.598 15.2 1
32002 32002 Pg-9 Die 0.598 15.2 1
31970 31970 Pg-11 Slug-Buster® Punch 0.732 18.6 1
32003 32003 Pg-11 Die 0.732 18.6 1
31971 31971 Pg-13 Slug-Buster® Punch 0.803 20.4 1
32004 32004 Pg-13 Die 0.803 20.4 1
31973 31973 Pg-21 Slug-Buster® Punch 3/4" 1.115 28.3 1
32006 32006 Pg-21 Die 3/4" 1.115 28.3 1
36284 36284 Slug-Buster® Punch 1-7/32 1.210 30.5 1
36279 36279 Die 1-7/32 1.210 30.5 1
31975 31975 Pg-29 Slug-Buster® Punch 1.457 37.0 1
32008 32008 Pg-29 Die 1.457 37.0 1
31976 31976 Pg-36 Slug-Buster® Punch 1.850 47.0 1
32009 32009 Pg-36 Die 1.850 47.0 1
31978 31978 Pg-48 Slug-Buster® Punch 2.362 60.0 1
32011 32011 Pg-48 Die 2.362 60.0 1
DRAW STUDS AND MISC.
746 17091 Ram (includes following item) 1 1 1 1 1
2113B 10109 Draw Stud–3/4" x 5 3/8" 1 1 1 1 1
1557A A 03170 Punch Sleeve 1 1 1 1 1
20963 20963 Draw stud–3/8" x 4.8" 1 1 1 1 1
15908 15908 Spacer Group (includes 1 ea. of following 3 items) 1 1 1 1 1
1924AA 03248 Spacer-Short 1 1 1 1 1
1925A A 03249 Spacer-Medium 1 1 1 1 1
1926A A 06904 Spacer-Long 1 1 1 1 1
34410 34410 Kwik Stepper® Step Bit 1/2" 1 1 1 1 1
767 13284 Hydraulic Hand Pump 1 1 1 1 1
06302 06302 High Pressure Hose – 1/4" x 3' 1 1 1 1
30206 30206 Plastic Case 1 1 1
18402 18402 Steel case 1 1
25094 25094 Tray 1
70
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
7625
Slug-Buster® Ram and Foot Pump Hydraulic Driver Kits
Foot operation frees both hands to position punch.
Punches 10 times faster than wrench method.
Will also drive 751 Cable Cutter head.
Powerful 11-ton hydraulic ram.
Can be used with most standard round, Slug-Buster®
and Slug-Splitter SC punch sizes. (Not 1/2", 9/16" 5/8")
Can be used with non-round punches (adapter may be required).
10 GA. MILD STEEL 10 GA. STAINLESS STEEL
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
7625 25097 Driver, Foot Pump, Steel Case 37 17
7606SB 07173 Driver, Foot Pump, Slug-Buster® Punches, Dies and
Draw Studs for 1/2” through 2” Conduit, Steel Case
42 19
7610SB 07174 Driver, Foot Pump, Slug-Buster® Punches, Dies
& Draw Studs for 1/2” through 2” Conduit, Slug-
Buster® Punches and 2 1/2” through 4” Conduit
Standard Round Punches
60 27
STEEL CAPACITIES FOR CONDUIT SIZES
STANDARD PUNCHES AND SLUG-BUSTER®STANDARD SLUG-SPLITTER SC
REQUIRED DRAW STUD
AND ACCESSORIES 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
3/4" Stud (2113B),
3/8" Stud (20963) & Spacers
3/4" Stud (2113B),
Long Spacer
3/4" Stud (2113B),
Short Spacer
3/4" Stud (2113B)
3/4" Stud (2113B),
& Sleeve (03170)
7/16" Stud (29451)
3/4" Stud (29452)
71
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Ram and Foot Pump Kits Parts List
RAM AND FOOT PUMP HYDRAULIC DRIVER PARTS IDENTIFICATION
(Match letters above to drawing.)
T
U
A
F
DB
HGL
S
C
C
D
HOLE SIZE KIT CAT./UPC NO.
CAT NO. UPC NO. DESCRIPTION CONDUIT &
PIPE SIZE
ACTUAL 7625/
25097
7606SB/
07173
7610SB/
07174
Ø INCH Ø MM
PUNCHES AND DIES
721-1/2 31756 1/2" Conduit Size Slug-Buster® Punch 1/2" 7/8 0.885 22.5 1 1
14722 14722 1/2" Conduit Size Die 1/2" 7/8 0.885 22.5 1 1
721-3/4 31757 3/4" Conduit Size Slug-Buster® Punch 3/4" 1.115 28.3 1 1
124AV 06972 3/4" Conduit Size Die 3/4" 1.115 28.3 1 1
721-1 31758 1" Conduit Size Slug-Buster® Punch 1" 1.362 34.6 1 1
126AV 04011 1" Conduit Size Die 1" 1.362 34.6 1 1
721-1-1/4 31759 1-1/4" Conduit Size Slug-Buster® Punch 1-1/4" 1-11/16 1.701 43.2 1 1
128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 1 1
721-1-1/2 31760 1-1/2" Conduit Size Slug-Buster® Punch 1-1/2" 1-15/16 1.951 49.6 1 1
440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 1 1
721-2 31761 2" Conduit Size Slug-Buster® Punch 2" 2-3/8 2.416 61.5 1 1
442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 1 1
1429AV 04175 2-1/2" Conduit Size Punch 2-1/2" 2-7/8 2.914 74.0 1
1430AV 04177 2-1/2" Conduit Size Die 2-1/2" 2-7/8 2.914 74.0 1
1431AV 04180 3" Conduit Size Punch 3" 3-1/2 3.539 89.9 1
1432AV 04183 3" Conduit Size Die 3" 3-1/2 3.539 89.9 1
2982AV 04653 3-1/2" Conduit Size Punch 3-1/2" 44.044 102.7 1
2981AV 04652 3-1/2" Conduit Size Die 3-1/2" 44.044 102.7 1
2984AV 04655 4" Conduit Size Punch 4" 4-1/2 4.544 115.4 1
2983AV 04654 4" Conduit Size Die 4" 4-1/2 4.544 115.4 1
DRAW STUDS AND MISC.
746 17091 (A) Ram (includes 1 ea. of items B, C, and D) 1 1 1
2113B 10109 (B) Draw Stud–3/4" x 5 3/8" 1 1 1
54167 54167 (C) Female Coupler–1/4" 1 1 1
54168 54168 (D) Dust Plug 1 1 1
1557A A 03170 (F) Punch Sleeve 1 1 1
20963 20963 (G) Draw stud–3/8" x 4.8" 1 1 1
15908 15908 (H) Spacer Group (includes 1 ea. of items I, J, and K) 1 1 1
1924AA 03248 (I) Spacer-Short 1 1 1
1925A A 03249 (J) Spacer-Medium 1 1 1
1926A A 06904 (K) Spacer-Long 1 1 1
34410 34410 (L) Kwik Stepper® Step Bit 1/2" 1 1 1
1725 31353 (S) Hydraulic Foot Pump (includes 1 ea. – 54167 female coupler and 54168 dust plug) 1 1 1
37729 37729 (T) High Pressure Hose Unit – 1/4" x 10'; filled with hydraulic oil;
(includes the following 2 items)
1 1 1
54169 54169 Couplers 2 2 2
54170 54170 Dust Caps 2 2 2
23955 23955 (U) Steel case 1 1 1
25094 25094 Tray 1 1 1
72
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
10 GA. MILD STEEL 10 GA. STAINLESS STEEL
Quick Draw® Hydraulic Punch Driver and Kits
The Quick Draw®, Quick Draw 90®, and Quick Draw® Flex feature:
Compact, lightweight design for portability and fast, easy
one-person operation.
Develops 8 tons of hydraulic force for easy punching, even in
10-gauge stainless steel, depending on individual punch capacities.
Quick Draw® is perfect for fast, straight-on front panel punching.
Quick Draw 90®s right angle driver head rotates over 180 degrees
for maximum flexibility in tight working areas.
Quick Draw® Flex allows unlimited driver orientation to simplify
access to work area.
Can be used with non-round punches within the capacity of the tool
(adapter may be required).
U.S. Patent #6,772,521.
7806SB
Quick Draw
®
Kit
7906SB
Quick Draw 90
®
Kit
7706SB
Flex Driver Kit
WEIGHT
CAT. NO. UPC NO. DESCRIPTION LBS. KG.
7704SB 10475 Quick Draw® Flex Driver, 2 Draw Studs, 1 Adapter, 1
Spacer and Case
12.1 5.5
7706SB 10476 Standard – Quick Draw® Flex Driver, 1/2” through
2” Slug-Buster® Conduit Size Punches and Dies, 2
Draw Studs, 1 Adapter, 1 Spacer and Case
17.3 7.9
7804SB 34292 Quick Draw® Driver, 2 Draw Studs, 1 Adapter, 1
Spacer and Case
10 4.5
7806SB 34293 Standard – Quick Draw® Driver, 1/2” through 2”
Slug-Buster® Conduit Size Punches and Dies 2
Draw Studs, 1 Adapter, 1 Spacer and Case
14 6.4
7804E 34291 Metric – Quick Draw® Driver, 2 Draw Studs, 1
Adapter, 1 Spacer and Case
9.4 4.3
7804ESB 35611 Metric – Quick Draw® Driver, Slug-Buster® Pg
Punches and Dies 15.2 mm through 30.5 mm, 2
Draw Studs, 1 Adapter, 1 Spacer and Case
10.3 4.7
7804ISO 35614 Metric – Quick Draw® Driver, Slug-Buster® ISO
Punches and Dies 16.2 mm through 40.5 mm, 2
Draw Studs, 1 Adapter, 1 Spacer and Case
11.4 5.2
7904SB 33794 Quick Draw 90® Driver, 2 Draw Studs, 1 Adapter, 1
Spacer and Case
10 4.5
7906SB 34300 Quick Draw 90® Driver, 1/2” through 2” Slug-
Buster® Conduit Size Punches and Dies, Draw
Studs, 1 Adapter, 1 Spacer and Case
14 6.4
7904E 34299 Metric – Quick Draw 90® Driver, 2 Draw Studs, 1
Adapter, 1 Spacer and Case
11 5.0
7904ESB 35615 Metric – Quick Draw 90® Driver, Slug-Buster® Pg
Punches and Dies 15.2 mm through 30.5 mm, 2
Draw Studs, 1 Adapter, 1 Spacer and Case
11 5.0
7904ISO 35616 Metric – Quick Draw 90® Driver, Slug-Buster® ISO
Punches and Dies 16.2 mm through 40.5 mm, 2
Draw Studs, 1 Adapter, 1 Spacer and Case
12.2 5.5
34983 34983 Plastic Case
STEEL CAPACITIES FOR CONDUIT SIZES
STANDARD PUNCHES AND SLUG-BUSTER®SLUG-SPLITTER SC
REQUIRED
DRAW STUD AND 1/2" 3/4" 1-7/32"
OILTIGHT
1" 1-1/4" 1-1/2" 2" 1/2" 3/4" 1-7/32"
OILTIGHT
1-1/4"
ACCESSORIES
3/8" Draw Stud
Spacer & 7/16" Draw Stud
Spacer & 3/4" Draw Stud
3/4" Draw Stud
73
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
CAT. NO. UPC NO. DESCRIPTION
29451 29451 7/16" (11.1 mm) Stainless Steel Draw Stud
Parts List for Quick Draw®, Quick Draw 90® and Quick Draw® Flex Kits
OPTIONAL ACCESSORIES FOR 7806SB, 7804E, 7804ESB, 7804ISO, 7906SB, 7904E, 7904ESB AND 7904ISO KITS (NOT INCLUDED IN KITS)
HOLE SIZE KIT CAT./UPC NO.
CAT
NO.
UPC NO.
DESCRIPTION
CONDUIT
& PIPE
SIZE
ACTUAL
7704SB/
10475
7706SB/
10476
7804E/
34291
7804ESB/
35611
7804ISO/
35614
7804SB/
34292
7806SB/
34293
7904E/
34299
7904ESB/
35615
7904ISO/
35616
7904SB/
33794
7906SB/
34300
Ø INCH Ø MM
PUNCHES AND DIES
721-1/2 31756
1/2" Conduit Size
Slug-Buster® Punch
1/2" 7/8 0.885 22.5
14722 14722
1/2" Conduit Size Die 1/2" 7/8 0.885 22.5
721-3/4 31757
3/4" Conduit Size
Slug-Buster® Punch
3/4" 1.115 28.3
124AV 06972
3/4" Conduit Size Die 3/4" 1.115 28.3
721-1 31758
1" Conduit Size
Slug-Buster® Punch
1" 1.362 34.6
126AV 04011
1" Conduit Size Die 1" 1.362 34.6
721-1-1/4 31759
1-1/4" Conduit Size Slug-
Buster® Punch
1-1/4" 1-11/16 1.701 43.2
128AV 04013
1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2
721-1-1/2 31760
1-1/2" Conduit Size Slug-
Buster® Punch
1-1/2" 1-15/16 1.951 49.6
440AV 04061
1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6
721-2 31761
2" Conduit Size
Slug-Buster® Punch
2" 2-3/8 2.416 61.5
442AV 04063
2" Conduit Size Die 2" 2-3/8 2.416 61.5
31696 31696
Pg-9 Slug-Buster® Punch 0.598 74.0
32002 32002
Pg-9 Die 0.598 74.0
31970 31970
Pg-11 Slug-Buster® Punch 0.732 89.9
32003 32003
Pg-11 Die 0.732 89.9
31971 31971
Pg-13 Slug-Buster® Punch 0.803 102.7
32004 32004
Pg-13 Die 0.803 102.7
31973 31973
Pg-21 Slug-Buster® Punch 3/4" 1.115 115.4
32006 32006
Pg-21 Die 3/4" 1.115 115.4
36284 36284
30.5 mm
Slug-Buster® Punch
1-7/32 1.210 30.5
36279 36279
30.5 mm Die 1-7/32 1.210 30.5
35163 35163
ISO-16
Slug-Buster® Punch
0.638 16.2
35162 35162
ISO-16 Die 0.638 16.2
35165 35165
ISO-25
Slug-Buster® Punch
1 1.000 25.4
35164 35164
ISO-25 Die 1 1.000 25.4
35169 35169
ISO-32
Slug-Buster® Punch
1.280 32.5
35168 35168
ISO-32 Die 1.280 32.5
35158 35158
ISO-40
Slug-Buster® Punch
1.595 40.5
35159 35159
ISO-40 Die 1.595 40.5
34288 34288
Quick Draw® Hydrualic Punch
Driver
33796 33796
Quick Draw 90® Hydrualic
Punch Driver
10383 10383
Quick Draw® Flex Driver
DRAW STUDS AND MISC.
1614SS 30043
Draw Stud - 3/8" x 2-13/16"
31872 31872
Draw Stud - 3/4" x 4-1/8"
1924AA 03248
Spacer - Short
33967 33967
Stud Adapter - 3/8"
35202 35202
Plastic Case
34983 34983
Plastic Case
10391 10391
Plastic Case
74
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Slug-Buster® Ratchet Punch Driver Kits
Time-saving ball bearing head punches faster than wrench method.
Requires less than half the force of conventional ratchet drivers.
Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Standard
and Slug-Buster® punches; and 16 gauge (1.5 mm) stainless steel with
Greenlee Slug-Splitter SC punches.
Ratchet action allows for use in confined areas.
Unique design eliminates stud rotation during punching – lowers the strain
on studs.
Steel carrying case.
1904
HOLE SIZE KIT CAT./UPC NO.
CONDUIT CAPACITY 1904/ 1906SB/
& PIPE ACTUAL MILD STEEL 30216 34357
CAT. NO. UPC NO. DESCRIPTION SIZE Ø INCH Ø MM GA MM
PUNCHES AND DIES
721-1/2 31756 1/2" Conduit Size Slug-Buster® Punch 1/2" 7/8 0.885 22.5 10 3.5
14722 14722 1/2" Conduit Size Die 1/2" 7/8 0.885 22.5 10 3.5
721-3/4 31757 3/4" Conduit Size Slug-Buster® Punch 3/4" 1.115 28.3 10 3.5
124AV 06972 3/4" Conduit Size Die 3/4" 1.115 28.3 10 3.5
721-1 31758 1" Conduit Size Slug-Buster® Punch 1" 1.362 34.6 10 3.5
126AV 04011 1" Conduit Size Die 1" 1.362 34.6 10 3.5
721-1-1/4 31759 1-1/4" Conduit Size Slug-Buster® Punch 1-1/4" 1-11/16 1.701 43.2 10 3.5
128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 10 3.5
721-1-1/2 31760 1-1/2" Conduit Size Slug-Buster® Punch 1-1/2" 1-15/16 1.951 49.6 10* 3.5
440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 10* 3.5
721-2 31761 2" Conduit Size Slug-Buster® Punch 2" 2-3/8 2.416 61.5 10* 3.5
442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 10* 3.5
DRAW STUDS AND MISC.
12097 12097 Draw Stud – 3/8" x 3-1/2"
12099 12099 Draw Stud – 3/4" x 4-3/4"
30227 30227 Draw Stud – 7/16" x 3-5/8"
30228 30228 Steel Case
20495 20495 Ratchet wrench only
30225 30225 Handle
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
1904 30216 Basic High Leverage Ratchet Driver with Three
Draw Studs and Case
14 6.4
1906SB 34357 High Leverage Ratchet Driver with 1/2”
through 2” Slug-Buster® Conduit Size Punches,
Dies, Draw Studs and Case
20 9.1
SLUG-BUSTER® KNOCKOUT KITS
75
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Slug-Buster® Knockout Kit with Ratchet Wrench
1" Hex Ratchet Wrench allows use with both 3/8"
(9.5 mm) and 3/4" (19.1 mm) draw studs.
High-impact, rugged plastic carrying case.
CAPACITY
MILD STEEL WEIGHT
CAT NO. UPC NO. DESCRIPTION GA MM LBS. KG.
7238SB 34757 1/2” – 2” Conduit Size
Slug-Buster® Knockout Punch Kit
10 3.5 10 4.54
7238SB/34757 SLUG-BUSTER® KNOCKOUT PUNCH KIT INCLUDES
HOLE SIZE ACTUAL
CAT NO. UPC NO. DESCRIPTION Ø INCH Ø MM.
34941 34941 Ratchet wrench – 1” Hex
721-1/2 31756 1/2” Conduit Size Punch 7/8 .885 22.5
14722 14722 1/2” Conduit Size Die14722 7/8 .885 22.5
721-3/4 31757 3/4” Conduit Size Punch 1.115 28.3
124AV 06972 3/4” Conduit Size Die 1.115 28.3
721-1 31758 1” Conduit Size Punch 1.362 34.6
126AV 04011 1” Conduit Size Die 1.362 34.6
721-1-1/4 31759 1-1/4” Conduit Size Punch 1.701 43.2
128AV 04013 1-1/4” Conduit Size Die 1.701 43.2
721-1-1/2 31760 1-1/2” Conduit Size Punch 1.951 49.6
440AV 04061 1-1/2” Conduit Size Die 1.951 49.6
721-2 31761 2” Conduit Size Punch 2-3/8 2.416 61.5
442AV 04063 2” Conduit Size Die 2-3/8 2.416 61.5
00042 00042 Ball Bearing Draw Stud
with 1” Hex Head3/8” x
1-5/8
304AVBB 04042 Ball Bearing Draw Stud–3/4 x
2-15/16
34758 34758 Plastic Case
76
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Slug-Buster® Manual Knockout Kits
Assortment of commonly used Slug-Buster® knockout punches,
packaged to meet the contractor’s needs.
High-impact, rugged plastic carrying case.
7237BB
7235BB
CAPACITY
MILD STEEL WEIGHT
CAT NO. UPC NO. DESCRIPTION GA MM LBS. KG.
7235BB 32013 1/2” - 1-1/4” Conduit Size
Manual Slug-Buster®
Knockout Punch Kit
10 3.5 2.7 1.2
7237BB 32014 1-1/2” and 2” Conduit
Size Manual Slug-Buster®
Knockout Punch Kit
10 3.5 5.2 2.4
7237BB/32014 SLUG-BUSTER® KNOCKOUT PUNCH KIT INCLUDES
HOLE SIZE ACTUAL
CAT NO. UPC NO. DESCRIPTION Ø INCH Ø MM
721-1-1/2 31760 1-1/2” Conduit Size Punch 1.951 49.6
440AV 04061 1-1/2” Conduit Size Die 1.951 49.6
721-2 31761 2” Conduit Size Punch 2-3/8 2.416 61.5
442AV 04063 2” Conduit Size Die 2-3/8 2.416 61.5
304AVBB 04042 Draw Stud3/4” x 2-15/16”
32012 32012 Plastic Case
7235BB/32013 SLUG-BUSTER® KNOCKOUT PUNCH KIT INCLUDES
HOLE SIZE ACTUAL
CAT NO. UPC NO. DESCRIPTION Ø INCH Ø MM
721-1/2 31756 1/2” Conduit Size Punch 7/8 .885 22.5
14722 14722 1/2” Conduit Size Die 7/8 .885 22.5
00042 00042 Draw Stud3/8” x 1-5/8”
721-3/4 31757 3/4” Conduit Size Punch 1.115 28.3
124AV 06972 3/4” Conduit Size Die 1.115 28.3
721-1 31758 1” Conduit Size Punch 1.362 34.6
126AV 04011 1” Conduit Size Die 1.362 34.6
721–1-1/4 31759 1-1/4” Conduit Size Punch 1.701 43.2
128AV 04013 1-1/4” Conduit Size Die 1.701 43.2
249AVBB 04040 Draw Stud3/4” x 2-1/8”
31880 31880 Plastic Case
77
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Slug-Buster® Knockout Kit with Ratchet Wrench - Metric
1" (25.4 mm) hex ratchet wrench allows use with both 3/8" (9.5 mm)
and 3/4" (19.1 mm) draw studs.
3/8" (9.7 mm) Kwik Stepper® step bit included.
High-impact, rugged plastic carrying case.
36690
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
36690 36690 Pg-9 through Pg-21 and 30.5 mm Manual Slug-
Buster® Metric Knockout Punch Kit
4.7 2.1
36691 36691 Pg-9 through Pg-48 and 30.5 mm
Manual Slug-Buster® Metric Knockout Punch Kit
94.1
36692 36692 ISO-16 through ISO-40 Manual Slug-Buster® Metric
Knockout Punch Kit
5.6 2.5
36693 36693 ISO-16 through ISO-63 Manual Slug-Buster® Metric
Knockout Punch Kit
94.1
HOLE SIZE KIT CAT./UPC NO.
CAT NO. UPC NO. DESCRIPTION ACTUAL CAPACITY
MILD STEEL 36690 36691 36692 36993
IN. MM GA MM
PUNCHES AND DIES
31969 31969 Pg-9 Slug-Buster® Punch 0.598 15.2 14 2.0
32002 32002 Pg-9 Die 0.598 15.2 14 2.0
31970 31970 Pg-11 Slug-Buster® Punch 0.732 18.6 14 2.0
32003 32003 Pg-11 Die 0.732 18.6 14 2.0
31971 31971 Pg-13 Slug-Buster® Punch 0.803 20.4 14 2.0
32004 32004 Pg-13 Die 0.803 20.4 14 2.0
721-1/2 31756 Pg-16 Slug-Buster® Punch 7/8 0.885 22.5 10 3.5
14722 14722 Pg-16 Die 7/8 0.885 22.5 10 3.5
31973 31973 Pg-21 Slug-Buster® Punch 1.115 28.3 14 2.0
32006 32006 Pg-21 Die 1.115 28.3 14 2.0
36284 36284 30.5 mm Slug-Buster® Punch 1-7/32 1.210 30.5 14 2.0
36279 36279 30.5 mm Die 1-7/32 1.210 30.5 14 2.0
31975 31975 Pg-29 Slug-Buster® Punch 1.457 37.0 10 3.5
32008 32008 Pg-29 Die 1.457 37.0 10 3.5
31976 31976 Pg-36 Slug-Buster® Punch 1.850 47.0 10 3.5
32009 32009 Pg-36 Die 1.850 47.0 10 3.5
31978 31978 Pg-48 Slug-Buster® Punch 2.362 60.0 10 3.5
32011 32011 Pg-48 Die 2.362 60.0 10 3.5
35163 35163 ISO-16 Slug-Buster® Punch 0.638 16.2 14 2.0
35162 35162 ISO-16 Die 0.638 16.2 14 2.0
35165 35165 ISO-25 Slug-Buster® Punch 11.000 25.4 14 2.0
35164 35164 ISO-25 Die 11.000 25.4 14 2.0
35169 35169 ISO-32 Slug-Buster® Punch 1.280 32.5 10 3.5
35168 35168 ISO-32 Die 1.280 32.5 10 3.5
35158 35158 ISO-40 Slug-Buster® Punch 1.595 40.5 10 3.5
35159 35159 ISO-40 Die 1.595 40.5 10 3.5
35160 35160 ISO-50 Slug-Buster® Punch 22.000 50.8 10 3.5
35161 35161 ISO-50 Die 22.000 50.8 10 3.5
35167 35167 ISO-63 Slug-Buster® Punch 2-1/2 2.500 63.5 10 3.5
35166 35166 ISO-63 Die 2-1/2 2.500 63.5 10 3.5
DRAW STUDS AND MISC.
249AVBB 04040 Draw Stud – 3/4" x 2-1/8"
304AVBB 04042 Draw Stud – 3/4" x 2-15/16"
36018 36018 Kwik Stepper® Step Bit 9.7mm
34941 34941 Ratchet Wrench – 1" Hex
00042 00042 Ball Bearing Drive Nut with
1" Hex Head, 3/8" x 3"
36685 36685 Plastic Case
78
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Slug-Buster® Knockout Punch Kits for Ratchet/Hydraulic Drivers
Packaged in carton for easy insertion into your existing case.
Replacement punch kits for battery-powered, hydraulic and ratchet drivers.
HOLE SIZE KIT CAT./UPC NO.
CAT NO. UPC NO. DESCRIPTION CONDUIT &
PIPE SIZE
ACUTAL CAPACITY
MILD STEEL 7216/
32017
7214E/
32398
7215E/
32803 35617 06892
IN. MM GA MM
721-1/2 31756 1/2" Conduit Size Punch 1/2" 7/8 .885 22.5 10 3.5
14722 14722 1/2" Conduit Size Die 1/2" 7/8 .885 22.5 10 3.5
721-3/4 31757 3/4" Conduit Size Punch 3/4" 1.115 28.3 10 3.5
06972 06972 3/4" Conduit Size Die 3/4" 1.115 28.3 10 3.5
721-1 31578 1" Conduit Size Punch 1" 1.362 34.6 10 3.5
126AV 04011 1" Conduit Size Die 1" 1.362 34.6 10 3.5
721-1-1/4 31759 1-1/4" Conduit Size Punch 1-1/4" 1.701 43.2 10 3.5
128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1.701 43.2 10 3.5
721-1-1/2 31760 1-1/2" Conduit Size Punch 1-1/2" 1.951 49.6 10 3.5
440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1.951 49.6 10 3.5
721-2 31761 2" Conduit Size Punch 2" 2-3/8 2.416 61.5 10 3.5
442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 10 3.5
31969 31969 Pg-9 Slug-Buster Punch .598 15.2 14 2.0
32002 32002 Pg-9 Slug-Buster Die .598 15.2 14 2.0
31970 31970 Pg-11 Slug-Buster Punch .732 18.6 14 2.0
32003 32003 Pg-11 Slug-Buster Die .732 18.6 14 2.0
31971 31971 Pg-13 Slug-Buster Punch .803 20.4 14 2.0
32004 32004 Pg-13 Slug-Buster Die .803 20.4 14 2.0
31973 31973 Pg-21 Slug-Buster Punch 1.115 28.3 14 2.0
32006 32006 Pg-21 Slug-Buster Die 1.115 28.3 14 2.0
36284 36284 30.5 mm Punch 1-7/32 1.210 30.5 14 3.5
36279 36279 30.5 mm Die 1-7/32 1.210 30.5 14 3.5
31975 31975 Pg-29 Slug-Buster Punch 1.457 37.0 10 3.5
32008 32008 Pg-29 Slug-Buster Die 1.457 37.0 10 3.5
31976 31976 Pg-36 Slug-Buster Punch 1.850 47.0 10 3.5
32009 32009 Pg-36 Slug-Buster Die 1.850 47.0 10 3.5
31978 31978 Pg-48 Slug-Buster Punch 2.362 60.0 10 3.5
32011 32011 Pg-48 Slug-Buster Die 2.362 60.0 10 3.5
35163 35163 ISO-16 Punch 0.638 16.2 14 2.0
35162 35162 ISO-16 Die 0.638 16.2 14 2.0
35165 35165 ISO-25 Punch 1 1.000 25.4 14 2.0
35164 35164 ISO-25 Die 1 1.000 25.4 14 2.0
35169 35169 ISO-32 Punch 1.280 32.5 10 3.5
35169 35169 ISO-32 Die 1.280 32.5 10 3.5
35158 35158 ISO-40 Punch 1.595 40.5 10 3.5
35158 35158 ISO-40 Die 1.595 40.5 10 3.5
35160 35160 ISO-50 Punch 2 2.000 50.8 10 3.5
35160 35160 ISO-50 Die 2 2.000 50.8 10 3.5
35167 35167 ISO-63 Punch 2.520 64.0 10 3.5
35167 35167 ISO-63 Die 2.520 64.0 10 3.5
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
7216 32017 1/2” - 2” Conduit Size Knockout Punch and Die Kit 5.5 2.5
7214E 32398 Pg-9 through 30.5 mm Slug-Buster® Pg Punch Kit 1.3 .6
7215E 32803 ISO-16 through ISO-40 Slug-Buster® ISO Punch Kit 5.1 2.3
35617 35617 ISO-16 through ISO-40 Slug-Buster® ISO Punch Kit 1.6 .7
06892 06892 ISO-16 through ISO-63 Slug-Buster ® ISO Punch Kit 5.5 2.5
79
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
PUNCH UNIT REPLACEMENT PARTS
PUNCH UNIT INCLUDES CONDUIT HOLE SIZE CAPACITY
MILD STEEL
REPLACEMENT
PUNCH, DIE AND DRAW STUD & PIPE ACTUAL WEIGHT REPLACEMENT PUNCH REPLACEMENT DIE MANUAL DRAW STUD
CAT NO. UPC NO. SIZE Ø INCH Ø MM GA. MM LBS G CAT. NO. UPC NO. CAT. NO. UPC NO. CAT. NO. UPC NO.
06727 06727 0.492 12.5 16 1.5 0.3 137 06728 06728 06729 06729 1675AV 04218
12356 12356 1/2 12.7 16 1.5 0.15 69 12360 12360 12358 12358 1675AV 04218
12357 12357 9/16 14.3 16 1.5 0.16 73.5 123591235912361 12361 1675AV 04218
7211EBB-15.2 31989 0.598 15.2 14 2.0 0.3 137 31969 31969 32002 32002 00042 00042
35177 35177 0.638 16.2 14 2.0 0.3 137 35163 35163 35162 35162 00042 00042
12335 12335 11/16 17.5 14 2.0 0.3 177 12337 12337 12336 12336 00042 00042
7211EBB-18.6 31990 0.732 18.6 14 2.0 0.3 137 31970 31970 32003 32003 00042 00042
12307 12307 3/4 19.1 14 2.0 0.4 183 12306 12306 12305 12305 00042 00042
7211EBB-20.4 31991 0.803 20.4 14 2.0 0.3 137 31971 31971 32004 32004 00042 00042
7211BB-1/2 31962 1/2" 7/8 0.885 22.5 10 3.5 0.3 137 721-1/2 31756 14722 14722 00042 00042
12338 12338 15/16 23.8 14 2.0 0.5 253 12340 12340 12339 12339 00042 00042
1/2" 7/8 0.885 22.5 10 3.5 721-1/2P01980 14722P01992 00042P 06678
35178 35178 1 1.000 25.4 14 2.0 0.5 227 35165 35165 35164 35164 00042P 06678
12341 12341 1-1/16 27 14 2.0 0.6 261 12343 12343 12342 12342 00042 00042
7211BB-3/4 31963 3/4" 1.115 28.3 10 3.5 0.8 363 721-3/4 31757 124AV 06972 249AVBB 04040
3/4" 1.115 28.3 10 3.5 721-3/4P01981 124AVP01993 249AVBBP01987
7211EBB-28.3 31993 1.115 28.3 14 2.0 0.5 227 31973 31973 32006 32006 00042 00042
60246 60246 1-7/32 1.210 30.5 10 3.5 0.6 273 60237 60237 36278 36278 249AVBB 04040
36508 36508 1-7/32 1.210 30.5 14 2.0 0.6 273 36284 36284 36279 36279 00042 00042
12308 12308 1-1/4 31.8 16 1.5 0.7 326.5 12309 12309 12310 12310 00042 00042
35179 35179 1.280 32.5 10 3.5 0.8 363 35169 35169 35168 35168 249AVBB 04040
12344 12344 1-5/16 33.4 16 1.5 0.7 345 12346 12346 12345 12345 00042 00042
7211BB-1 31964 1" 1.362 34.6 10 3.5 1 454 721-1 31758 126AV 04011 249AVBB 04040
1" 1.362 34.6 10 3.5 721-1P01982 126AVP01994 249AVBBP01987
12304 12304 1-3/8 34.9 10 3.0 1.1 507.5 12303 12303 12302 12302 04040 04040
7211EBB-37 31995 1.457 37.0 10 3.5 1.2 545 31975 31975 32008 32008 249AVBB 04040
12313 12313 1-1/2 3 8.1 10 3.0 1.2 559 12312 12312 12311 12311 04040 04040
35180 35180 1.595 40.5 10 3.5 1.2 545 35158 35158 35159 35159 249AVBB 04040
12347 12347 1-5/8 41.3 10 3.0 1.3 610.25 12349 12349 12348 12348 04040 04040
7211BB-1-1/4 31965 1-1/4" 1.701 43.2 10 3.5 1.3 590 721-1-1/4 31759 128AV 04013 249AVBB 04040
12316 12316 1-3/4 44.5 10 3.0 1.4 661.5 12315 12315 12314 12314 04040 04040
1-1/4" 1.701 43.2 10 3.5 721-1-1/4P01983 128AVP01995 249AVBBP01987
7211EBB-47 31996 1.850 47.0 10 3.5 1.9 862 31976 31976 32009 32009 304AVBB 04042
12350 12350 1-7/8 47.6 10 3.0 1.8 853.5 1235412354 12352 12352 04042 04042
7211BB-1-1/2 31966 1-1/2" 1.951 49.6 10 3.5 2.1 953 721-1-1/2 31760 440AV 04061 304AVBB 04042
1-1/2" 1.951 49.6 10 3.5 721-1-1/2P01984 440AVP01996 304AVBBP01988
35181 35181 2 2.000 50.8 10 3.5 2.3 1043 35160 35160 35161 35161 304AVBB 04042
36171 36171 2-1/8 2.125 54.0 10 3.5 2.5 1134 36172 36172 36173 36173 304AVBB 04042
12351 12351 2-1/4 57. 2 10 3.0 2.9 1336 12355 12355 12353 12353 04042 04042
7211EBB-60 31998 2.362 60.0 10 3.5 2.8 1270 31978 31978 32011 32011 304AVBB 04042
7211BB-2 31967 2" 2-3/8 2.416 61.5 10 3.5 3.2 1452 721-2 31761 442AV 04063 304AVBB 04042
2" 2-3/8 2.416 61.5 10 3.5 721-2P01985 442AVP01997 304AVBBP01988
35182 35182 2.520 64.0 10 3.5 3.4 1542 35167 35167 35166 35166 304AVBB 04042
Individually Packaged in Point of Purchase clamshell for display opportunities
Slug-Buster® Knockout Punches 0.492" to 2.520"
The contractor’s choice – worldwide.
Unique punch profile also splits slugs for easier slug removal.
Use with battery-powered, hydraulic, ratchet or manual drivers.
Uses standard Greenlee dies and draw studs.
Slug Buster® punches available in sizes up thru 2.52" (64.0 mm).
SPECIFICATIONS
Capacity Mild steel up through 10 gauge (3.5 mm).
Application Punch mild steel, aluminum, fiberglass and plastic.
Hole Sizes Conduit Sizes- Hole size is outside diameter of US conduit sizes. i.e 1/2" conduit
actually 7/8".
Pg Sizes-European standard pipe sizes.
ISO Sizes- International Standards Organization pipe sizes.
Operation Battery, hydraulic, ratchet or manual drivers. When used with ratchet, hydraulic or
battery drivers, buy the punch and die only; the draw stud is part of the driver kit.
Unique Slug-Buster
®
punch design creases
slug as the punch is
drawn into the die.
Slug is split in half as
punching operation is
completed.
Split slugs fall free from
the die and stud.
SLUG-BUSTER® KNOCKOUTS
80
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Slug-Buster SC® (Self-Centering)
Save time and ensure accuracy! Self-centering punch aligns
itself on pilot hole.
No need to draw crosshairs or line up die alignment marks.
Unique punch also splits slugs for easier slug removal.
US Patent No. 6,973,729
®
*POP Packaged
10800 SLUG-BUSTER SC® KNOCKOUT KIT INCLUDES
CAT NO. UPC NO. DESCRIPTION CONDUIT SIZE HOLE SIZES
77P-1/2 11361 1/2" Punch Buster, SC 1/2" .885
14722 14722 1/2" Die Rd. 1/2" .885
77P-3/4 11362 3/4" Punch Buster, SC 3/4" 1.115
124AV 06972 3/4" Die Rd. 3/4" 1.115
77P-1 11363 1" Punch Buster, SC 1" 1.362
126AV 04011 1" Die Rd. 1" 1.362
77P-1-1/4 11364 1-1/4" Punch Buster, SC 1-1/4" 1.701
128AV 04013 1-1/4" Die Rd. 1-1/4" 1.701
77P-1-1/2 11365 1-1/2" Punch Buster, SC 1-1/2" 1.951
440AV 04061 1-1/2" Die Rd. 1-1/2" 1.951
77P-2 11366 2" Punch Buster, SC 2" 2.416
442AV 04063 2" Die Rd. 2" 2.416
WEIGHT OF
PUNCH UNIT CONDUIT & HOLE SIZES PUNCH UNIT PUNCH ONLY DIE ONLY STUD ONLY
CAT NO. UPC NO. PIPE SIZE INCH MM LBS. G CAT NO. UPC NO. CAT NO. UPC NO. CAT NO. UPC NO.
77U-1/2* 10801 1/2" .885 22.2 0.3 137 77P-1/2 11361 14722 14722 00042 00042
77P-1/2P* 11261 14722P* 01992 00042 00042
77U-3/4* 10802 3/4" 1.115 28.3 0.8 363 77P-3/4 11362 124AV 06972 249AVBB 04040
77-3/4P* 11262 124AVP* 01993 249AVBBP* 01987
10807* 10807 -1.21 30.5 0.9 408 11357 11357 36278 36278 249AVBB 04040
77U-1* 10803 1" 1.362 34.6 1454 77P-1 11363 126AV 04011 294AVBB 04040
77P-1P* 11263 126AVP* 01994 249AVBBP 01987
77U-1-1/4* 10804 1-1/4" 1.701 43.2 1.3 590 77P-1-1/4 11364 128AV 04013 249AVBB 04040
77P-1-1/4P * 11264 128AVP* 01995 249AVBBP* 01987
77U-1-1/2* 10805 1-1/2" 1.951 49.6 2.1 953 77P-1-1/2 11365 440AV 04061 304AVBB 04042
77P-1-1/2P* 11265 440AVP* 01996 304AVBBP* 01988
77U-2* 10806 2" 2.416 61.4 2.3 1043 77P-2 11366 442AV 04063 304AVBB 04042
77P-2P* 11266 442AVP* 01997 304AVBBP* 01988
10800 10800 1/2”-2” Kit - - - - - - - - - -
81
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
A
B
FGH
J
L
M
N
R
IK
A
B
FGH
L
R
M
N
K J I
Fast, easy and simple to operate.
Compact design for field use on construction sites
and maintenance jobs.
Punches 10 times faster than wrench method.
Will also drive 751 Cable Cutter head.
Can be used with most standard round Slug-Buster®
and Slug-Splitter SC punches (not 1/2", 9/16", 5/8").
Can be used with non-round punches
(adapter may be required).
3-foot hose
Powerful 11-ton hydraulic ram.
7310SB
RAM AND HAND PUMP HYDRAULIC DRIVER PARTS IDENTIFICATION
KEY CAT. NO. UPC NO. DESCRIPTION
A746 17091 Ram (includes Item B)
B2113B 10109 Draw Stud3/4” x 5 3/8
F1557A A 03170 Punch Sleeve
G20963 20963 Draw Stud3/8” x 4.8”
H15908 Spacer Group (includes Items I, J and K)
I1924AA 03248 Spacer-Short
J1925AA 03249 Spacer-Medium
K1926AA 06904 Spacer-Long
L34410 Kwik Stepper® Step Bit 1/2”
M767 13284 Hydraulic Hand Pump
N06302 06302 High Pressure Hose–1/4” x 3’
R30206 Plastic Case
10 GA. MILD STEEL
STEEL CAPACITIES FOR CONDUIT SIZES
STANDARD PUNCHES AND SLUG-BUSTER®
REQUIRED DRAW STUD
AND ACCESSORIES 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"
3/4" Stud (2113B),
3/8" Stud (20963) & Spacers
3/4" Stud (2113B),
Long Spacer
3/4" Stud (2113B),
Short Spacer
3/4" Stud (2113B)
3/4" Stud (2113B),
& Sleeve (03170)
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
7306 15909 Driver, Hand Pump, Standard Punches, Dies and Draw
Studs for 1/2” through 2” Conduit, Plastic Case
24 10.9
7310 15910 Driver, Hand Pump, Standard Punches, Dies and Draw
Studs and Spacers for 1/2” through 4” Conduit, Plastic
Case
54 24.5
7646Pg 27433 Metric – Driver, Hand Pump, Standard Pg Punches,
Dies and Draw Studs and Spacers for 15.2 mm
through 60.0 mm, Plastic Case
24 10.9
7304 02815 Standard Punch and Die Kit (no draw studs) for 2-1/2”
through 4” Conduit, Plastic Case
21 9.5
38456 38456 Driver, Hand Pump, Standard Punches, Dies and Draw
Studs and Spacers for 1/2” through 3” and 4” Conduit,
Plastic Case
48.4 22
Standard Round Manual Industrial Punch Kit (continued)
STANDARD HYDRAULIC KNOCKOUT PUNCH KITS
82
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Ram and Hand Pump Kits Parts List
HOLE SIZE KIT CAT./UPC NO.
CAT NO. UPC NO. DESCRIPTION
CONDUIT
& PIPE
SIZE
ACTUAL 7646/
15906
7306/
15909
7310/
15910
7646PG/
27433 38456
Ø IN Ø MM
PUNCHES AND DIES
721-1/2 31756 1/2" Conduit Size Slug-Buster® Punch 1/2" 7/8 0.885 22.5 1 1 1
14722 14722 1/2" Conduit Size Die 1/2" 7/8 0.885 22.5 1
123AV 04008 3/4" Conduit Size Punch 3/4" 1.115 28.3 1 1 1 1
124AV 06972 3/4" Conduit Size Die 3/4" 1.115 28.3 1 1 1
125AV 04010 1" Conduit Size Punch 1" 1.362 34.6 1 1 1
126AV 04011 1" Conduit Size Die 1" 1.362 34.6 1 1 1
127AV 06974 1-1/4" Conduit Size Slug-Buster® Punch 1-1/4" 1-11/16 1.701 43.2 1 1 1
128AV 04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 1 1 1
439AV 06978 1-1/2" Conduit Size Punch 1-1/2" 1-15/16 1.951 49.6 1 1 1
440AV 04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 1 1 1
441AV 04062 2" Conduit Size Punch 2" 2-3/8 2.416 61.5 1 1 1
442AV 04063 2" Conduit Size Die 2" 2-3/8 2.416 61.5 1 1 1
1429AV 04175 2-1/2" Conduit Size Punch 2-1/2" 2-7/8 2.914 74.0 1 1
1430AV 04177 2-1/2" Conduit Size Die 2-1/2" 2-7/8 2.914 74.0 1 1
1431AV 04180 3" Conduit Size Punch 3" 3-1/2 3.539 89.9 1 1
1432AV 04183 3" Conduit Size Die 3" 3-1/2 3.539 89.9 1 1
2982AV 04653 3-1/2" Conduit Size Punch 3-1/2" 44.044 102.7 1
2981AV 04652 3-1/2" Conduit Size Die 3-1/2" 44.044 102.7 1
2984AV 04655 4" Conduit Size Punch 4" 4-1/2 4.544 115.4 1 1
2983AV 04654 4" Conduit Size Die 4" 4-1/2 4.544 115.4 1 1
21316 21316 Pg-9 Slug Buster® Punch 0.598 15.2 1
32002 32002 Pg-9 Die 0.598 15.2 1
17700 17700 Pg-11 Slug Buster® Punch 0.732 18.6 1
32003 32003 Pg-11 Die 0.732 18.6 1
17697 17697 Pg-13 Slug Buster® Punch 0.803 20.4 1
32004 32004 Pg-13 Die 0.803 20.4 1
36882 36882 Pg-21 Slug Buster® Punch 3/4" 1.115 28.3 1
32006 32006 Pg-21 Die 3/4" 1.115 28.3 1
36282 36282 30.5 mm Punch 1-7/32 1.210 30.5 1
36279 36279 30.5 mm Die 1-7/32 1.210 30.5 1
18331 18331 Pg-29 Slug Buster® Punch 1.457 37.0 1
32008 32008 Pg-29 Die 1.457 37.0 1
17687 17687 Pg-36 Slug Buster® Punch 1.850 47.0 1
32009 32009 Pg-36 Die 1.850 47.0 1
17690 17690 Pg-48 Slug Buster® Punch 2.362 60.0 1
32011 32011 Pg-48 Die 2.362 60.0 1
DRAW STUDS AND MISC.
746 17091 Ram (includes following item) 1 1 1 1 1
2113B 10109 Draw Stud–3/4" x 5 3/8" 1 1 1 1 1
1557A A 03170 Punch Sleeve 1 1 1 1 1
20963 20963 Draw stud–3/8" x 4.8" 1 1 1 1 1
15908 15908 Spacer Group (includes 1 ea. of following 3 items) 1 1 1 1 1
1924AA 03248 Spacer-Short 1 1 1 1 1
1925A A 03249 Spacer-Medium 1 1 1 1 1
1926A A 06904 Spacer-Long 1 1 1 1 1
34410 34410 Kwik Stepper® Step Bit 1/2" 1 1 1 1 1
767 13284 Hydraulic Hand Pump 1 1 1 1 1
06302 06302 High Pressure Hose – 1/4" x 3' 1 1 1 1
30206 30206 Plastic Case 1 1 1
18402 18402 Steel case 1 1
83
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Standard Round Manual Knockout Punch Kits
735BB
737BB
Assortment of commonly used round standard knockout punches,
packaged to meet the contractor’s needs.
High-impact, rugged plastic carrying case.
7304 For 11 Ton
Hydraulic Drivers
STANDARD KNOCKOUT PUNCH KITS
Wrenches Sold Separately
for kits 737BB, 735BB and 7304BB
7304/02815 KNOCKOUT PUNCH KIT INCLUDES
HOLE SIZE
ACTUAL
CAT NO. UPC NO. DESCRIPTION Ø INCH Ø MM.
1429AV 04175 2-1/2” Conduit Size Punch 2-7/8 2.914 74.0
1430AV 04177 2-1/2” Conduit Size Die 2-7/8 2.914 74.0
1431AV 04180 3” Conduit Size Punch 3-1/2 3.539 89.9
1432AV 04183 3” Conduit Size Die 3-1/2 3.539 89.9
2982AV 04978 3-1/2” Conduit Size Punch 44.044 102.7
2981AV 04652 3-1/2” Conduit Size Die 44.044 102.7
2984AV 04655 4” Conduit Size Punch 4-1/2 4.544 115.4
2983AV 04654 4” Conduit Size Die 4-1/2 4.544 115.4
30236 30236 Plastic Case
NOTE: See Standard Round Knockout Punches on pages 86 and 87 for listing of individual punch units, punches, dies and draw studs.
CAPACITY
MILD STEEL WEIGHT
CAT NO. UPC NO. DESCRIPTION GA MM LBS. KG.
735BB 19973 1/2” - 1-1/4” Conduit Size Knockout
Punch Kit (Manual Round Standard)
10 3.5 2.5 1.1
737BB 19974 1-1/2” - 2” Conduit Size Knockout
Punch Kit (Manual Round Standard)
10 3.5 4.4 2.0
7304 02815 Standard Punches and Dies (no draw
studs) for 2-1/2” through 4”
Conduit, in Plastic Case
10 3.5 21 9.5
735BB/19973 KNOCKOUT PUNCH KIT INCLUDES
HOLE SIZE
ACTUAL
CAT NO. UPC NO. DESCRIPTION Ø INCH Ø MM.
721-1/2 31756 1/2” Conduit Size Slug-Buster® Punch 7/8 0.885 22.5
14722 14722 1/2” Conduit Size Die 7/8 0.885 22.5
00042 00042 3/8” x 1-9/16” Draw Stud
123AV 04008 3/4” Conduit Size Punch 1.115 28.3
124AV 06972 3/4” Conduit Size Die 1.115 28.3
125AV 04010 1” Conduit Size Punch 1.362 34.6
126AV 04011 1” Conduit Size Die 1.362 34.6
127AV 06974 1-1/4” Conduit Size Punch 1-11/16 1.701 43.2
128AV 04013 1-1/4” Conduit Size Die 1-11/16 1.701 43.2
249AVBB 04040 3/4” x 2-1/8” Draw Stud
31880 31880 Plastic Case
737BB/19974 KNOCKOUT PUNCH KIT INCLUDES
HOLE SIZE
ACTUAL
CAT NO. UPC NO. DESCRIPTION Ø INCH Ø MM.
439AV 06978 1-1/2” Conduit Size Punch 1-15/16 1.951 49.6
440AV 04061 1-1/2” Conduit Size Die 1-15/16 1.951 49.6
441AV 04062 2” Conduit Size Punch 2-3/8 2.416 61.5
442AV 04063 2” Conduit Size Die 2-3/8 2.416 61.5
304AVBB 04042 3/4” x 2-15/16” Draw Stud
32012 32012 Plastic Case
84
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Wrench Sold Separately
Standard Round Manual Industrial Punch Kit
Includes most popular sizes for industrial applications.
Time-saving tool for maintenance, repair and operation applications.
Convenient steel carrying case.
Ball bearing drive screw for easy manual operation or use
with ratchet and hydraulic drivers.
SPECIFICATIONS
Capacity 1-1/4" Punch - 16 gauge (1.5 mm) mild steel.
3/4", 1", and 1-1/8" Punches - 14 gauge (2.0 mm) mild steel.
7/8" and 1-1/2" Punches 10 gauge (3.5 mm) mild steel.
Operation Manual - Wrench not included.
CAT NO. UPC NO. DESCRIPTION
39860 39860 3/4” - 1-1/2” Hole Size Manual Industrial Punch Kit
39860 MANUAL INDUSTRIAL KNOCKOUT PUNCH KIT INCLUDES
HOLE SIZE
ACTUAL
CAT NO. UPC NO. DESCRIPTION Ø INCH Ø MM
113AV 03998 3/4” Punch 3/4 0.750 19.1
114AV 03999 3/4” Die 3/4 0.750 19.1
121AV 04006 7/8” Punch 7/8 0.885 22.5
14722 14722 7/8 Die 7/8 0.885 22.5
87AV 03986 1” Punch 11.000 25.4
35164 35164 1” Die 11.000 25.4
91AV 03990 1-1/8” Punch 1-1/8 1.125 28.6
92AV 03991 1-1/8 Die 1-1/8 1.125 28.6
117AV 04002 1-1/4” Punch 1-1/4 1.250 31.8
118AV 04003 1-1/4 Die 1-1/4 1.250 31.8
3207AV 04736 1-1/2” Punch 1-1/2 1.500 38.1
3208AV 07044 1-1/2” Die 1-1/2 1.500 38.1
00042 00042 3/8” BB Draw Stud
249AVBB 04040 3/4” BB Draw Stud
19193 19193 Steel Storage Box
10 GA. MILD STEEL
85
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Standard Round Manual Knockout Punch Kits - Metric
1" (25.4 mm) Hex ratchet wrench allows use with both 3/8" (9.5 mm)
and 3/4" (19.1 mm) draw studs.
12.7 mm Kwik Stepper® step bit included.
Plastic carrying case included.
36687
SPECIFICATIONS
Operation Manual - Ratchet wrench included
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
36687 36687 Pg-9 through Pg-48 Manual Round Standard
Knockout Punch Kit
8.8 4
36688 36688 ISO-16 through ISO-40 Manual Round Standard
Knockout Punch Kit
5.2 2.3
7309E 32804 Pg-9 through Pg-48 Standard Knockout Pg.
Punch Kit. Replacement Kit Packaged in Carton
Without Plastic Case.
8.8 4
HOLE SIZE KIT CAT./UPC NO.
CAT NO. UPC NO. DESCRIPTION ACTUAL CAPACITY
MILD STEEL 36687 36688 7309E/
32804
Ø INCH Ø MM GA MM
PUNCHES AND DIES
21316 21316 Pg-9 Punch 0.885 22.5 14 2.0
31969 31969 Pg-9 Slug-Buster® Punch 0.885 22.5 14 2.0
32002 32002 Pg-9 Die 1.115 28.3 14 2.0
17700 17700 Pg-11 Punch 1.115 28.3 14 2.0
32003 32003 Pg-11 Die 1.362 34.6 14 2.0
17697 17697 Pg-13 Punch 1.362 34.6 14 2.0
32004 32004 Pg-13 Die 1.701 43.2 14 2.0
121AV 04006 Pg-16 Punch 7/8 1.701 43.2 10 3.5
14722 14722 Pg-16 Die 7/8 1.951 49.6 10 3.5
36882 36882 Pg-21 Punch 1.951 49.6 10 3.5
32006 32006 Pg-21 Die 2.416 61.5 10 3.5
36282 36282 30.5 mm Punch 1-7/32 2.416 61.5 16 1.5
36279 36279 30.5 mm Die 1-7/32 16 1.5
18331 18331 Pg-29 Punch 10 3.5
32008 32008 Pg-29 Die 10 3.5
17687 17687 Pg-36 Punch 10 3.5
32009 32009 Pg-36 Die 10 3.5
17690 17690 Pg-48 Punch 10 3.5
32011 32011 Pg-48 Die 10 3.5
35193 35193 ISO-16 Punch 14 2.0
35162 35162 ISO-16 Die 14 2.0
87AV 03986 ISO-25 Punch 14 2.0
35164 35164 ISO-25 Die 14 2.0
24459 24459 ISO-32 Punch 10 3.5
35168 35168 ISO-32 Die 10 3.5
24462 24462 ISO-40 Punch 10 3.5
35159 35159 ISO-40 Die 10 3.5
1756AV 04232 ISO-50 Punch 10 3.5
35161 35161 ISO-50 Die 10 3.5
1758AV 04234 ISO-63 Punch 10 3.5
1757AV 04233 ISO-63 Die 10 3.5
DRAW STUDS AND MISC.
249AVBB 04040 Draw Stud - 3/4" x 2-1/8"
304AVBB 04042 Draw Stud - 3/4" x 2-15/16"
34941 34941 Ratchet Wrench -1" Hex
34410 34410 Kwik Stepper Step Bit 1-2" (12.7 mm)
00042 00042 Ball Bearing Draw Stud with 1" Hex
Head, 3/8" x 1-5/8"
36685 36685 Plastic Case
86
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Standard Round Knockout Punches 0.5" to 6" Conduit and Pipe
Round standard metal punch units are complete units consisting
of punch, die and draw stud.
Use with battery-powered, hydraulic, ratchet or manual drivers.
Properly assembled through pilot holes, they will make clean, fast
and accurate holes.
Punch
Die
Draw Stud
Bushing
Ball Bearing
Nut
Every cut quick and clean ...Just tip it out.Slug falls free in die.
SPECIFICATIONS
Capacity Mild steel up through 10 gauge (3.5 mm).
Application Punch mild steel, aluminum, fiberglass and plastic.
Hole Sizes Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example:
1/2" conduit size punch actually makes a 7/8" hole.
Pg Sizes - European standard pipe sizes.
ISO Sizes - International Standards Organization pipe sizes.
Operation Operate with battery-powered, hydraulic, ratchet or manual drivers. When
used with battery-powered, hydraulic, or ratchet drivers buy the punch and
die only; the draw stud is part of the driver kit.
STANDARD KNOCKOUT PUNCHES
CAT NO. UPC NO. DESCRIPTION
3037AV O4686 Bushing for 3-1/2” (conduit hole size) and larger punches with
manual operation
87
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Standard Round Knockout Punches
PUNCH UNIT REPLACEMENT PARTS
PUNCH KIT-INCLUDES HOLE SIZE CAPACITY REPLACEMENT REPLACEMENT REPLACEMENT BALL
PUNCH, DIE & DRAW STUD CONDUIT & ACTUAL MILD STEEL WEIGHT PUNCH REPLACEMENT DIE DRAW STUD BEARING NUT
CAT NO. UPC NO. PIPE SIZE Ø INCH ØMM GA MM LBS G CAT. NO. UPC NO. CAT. NO. UPC NO. CAT. NO. UPC NO. CAT.NO UPC NO.
730-1/2 024 08 1/2 0.500 12.7 16 1.5 .1 46 1760AV 06996 1759AV 04235 1675AV 04218
730-9/16 02433 9/16 0.563 14.3 16 1.5 .1 46 1754AV 04230 1753AV 04229 1675AV 04218
21115 21115 0.598 15.2 14 2.0 .3 137 21316 21316 32002 32002 00042 00042
730-5/8 02409 5/8 0.625 15.9 16 1.5 .2 91 1742AV 04223 1743AV 04224 1675AV 04218
35192 35192 0.638 16.2 14 2.0 .3 137 35193 35193 35162 35162 00042 00042
730BB-11/16 25340 11/16 0.688 17.5 14 2.0 .3 137 1752AV 04228 1751AV 04227 00042 00042
730EBB-18.6 18886 0.732 18.6 14 2.0 .3 137 17700 17700 32003 32003 00042 00042
730BB-3/4 20667 3/4 0.750 19.1 14 2.0 .3 137 113AV 03998 114AV 03999 00042 00042
730EBB - 20.4 18887 0.803 20.4 14 2.0 .3 137 17697 17697 32004 32004 00042 00042
730BB-13/16 20668 13/16 0.812 20.6 14 2.0 .3 137 174 5AV 04226 1744AV 04225 00042 00042
71BB 22563 1/2" 7/8 0.885 22.5 10 3.5 .4 182 121AV 04006 14722 14722 00042 00042
730BB-15/16 25341 15/16 0.937 23.8 14 2.0 .5 227 1762AV 04238 1761AV 04237 00042 00042
730BB-1 20670 1 1.00 25.4 14 2.0 .5 227 87AV 03986 35164 35164 00042 00042
730BB-1-1/16 25342 1-1/16 1.063 27.0 14 2.0 .5 227 1763AV 04240 1764AV 04242 00042 00042
72BB 22564 3/4" 1.115 28.3 10 3.5 .9 409 123AV 04008 124AV 06972 249AVBB 04040
36910 36910 3/4" 1.115 28.3 14 2.0 .6 273 36882 36882 32006 32006 00042 00042
730BB-1-1/8 20671 1-1/8 1.125 28.6 14 2.0 .6 273 91AV 03990 92AV 03991 00042 00042
36506 36506 1-7/32 1.210 30.5 16 1.5 .6 273 36282 36282 36279 36279 00042 00042
730BB-1-1/4 20673 1-1/4 1.250 31.8 16 1.5 .7 318 117AV 04002 118AV 04003 00042 00042
24476 24476 1.280 32.5 10 3.5 1454 24459 24459 35168 35168 249AVBB 04040
730BB-1-5/16 25344 1-5/16 1.313 33.4 16 3.5 .7 318 1747AV 06587 1746AV 06586 00042 00042
73BB 22565 1" 1.362 34.6 10 3.5 1.1 499 125AV 04010 126AV 04011 249AVBB 04040
730BB-1-3/8 25427 1-3/8 1.375 34.9 10 3.5 1.1 499 3205AV 04734 3206AV 04735 249AVBB 04040
730EBB-37 18890 1.457 37.0 10 3.5 1454 18331 18331 32008 32008 249AVBB 04040
730BB-1-1/2 254281-1/2 1.500 38.1 10 3.5 1.2 545 3207AV 04736 3208AV 07044 249AVBB 04040
24477 24477 1.595 40.5 10 3.5 1.3 590 24462 24462 35159 35159 249AVBB 04040
730BB-1-5/8 25349 1-5/8 1.625 41.3 10 3.5 1.4 636 1794AV 04251 1793AV 04250 249AVBB 04040
74BB 22566 1-1/4" 1-11/16 1.701 43.2 10 3.5 1.4 636 127AV 0 6974 128AV 04013 249AVBB 04040
730BB-1-3/4 25350 1-3/4 1.750 44.5 10 3.5 1.5 681 1816AV 04257 1815AV 04256 249AVBB 04040
730EBB-47 18891 1.850 47.0 10 3.5 1.7 772 17687 17687 32009 32009 304AVBB 04042
730BB-1-7/8 25351 1-7/8 1.875 47.6 10 3.5 1.9 862 1791AV 04248 1792AV 04249 304AVBB 04042
75BB 22567 1-1/2" 1-15/16 1.951 49.6 10 3.5 2908 439AV 06978 440AV 04061 304AVBB 04042
730BB-2 20676 2 2.000 50.8 10 3.5 1.9 862 1756AV 04232 35161 36173 304AVBB 04042
730BB-2-1/8 20678 2-1/8 2.125 54.0 10 3.5 2.2 998 1783AV 04245 36173 04059 304AVBB 04042
730BB-2-1/4 25360 2-1/4 2.250 57.2 10 3.5 2.6 1180 437AV 04058 438AV 32011 304AVBB 04042
730EBB-60 18892 2.362 60.0 10 3.5 2.6 1180 17690 17690 32011 04063 304AVBB 04042
76BB 22568 2" 2-3/8 2.416 61.5 10 3.5 31361 441AV 04062 442AV 04233 304AVBB 04042
730BB-2-1/2 20679 2-1/2 2.500 63.5 10 3.5 31361 1758AV 04234 1757AV 06997 1434AV 04188 1433AVBB 04187
730PBB-2-5/8 21214 2-5/8 2.625 66.7 10 3.5 5.1 2314 1795AV 04252 1796AV 04246 1434AV 04188 1433AVBB 04187
730BB-2-3/4 25361 2-3/4 2.750 69.9 10 3.5 4.8 2178 1790AV 04247 1789AV 02443 304AVBB 04042
730MBB 25383 2.781 70.6 10 3.5 3.8 1724 730101A 02445 730100A 04177 1434AV 04188 1433AVBB 04187
738BB 19975 2-1/2" 2-7/8 2.914 74.0 10 3.5 52268 1429AV 04175 1430AV 04258 1434AV 04188 1433AVBB 04187
730BB-3 25372 3 3.000 76.2 10 3.5 6.1 2767 1821AV 04259 1820AV 06362 1434AV 04188 1433AVBB 04187
730TBB 25403 3-1/8 3.125 79.4 10 3.5 62722 1798AV 06363 1797AV 18906 1434AV 04188 1433AVBB 04187
730EBB-82 18635 3.228 82.0 10 3.5 6.3 2858 18905 18905 18906 04183 1434AV 04188 1433AVBB 04187
739BB 19976 3" 3-1/2 3.539 89.9 10 3.5 5.9 2677 1431AV 04180 1432AV 05266 1434AV 04188 1433AVBB 04187
730PBB-3-3/4 21216 3-3/4 3.750 95.3 10 3.5 7.7 3493 4640AV 05265 4641AV 04652 3026AV 04679 3036AVBB 04685
741BB* 19977 3-1/2"" 44.011 102.7 10 3.5 10 4536 2982AV 04653 2981AV 04654 3026AV 04679 3036AVBB 04685
742BB* 19978 4" 4-1/2 4.544 115.4 10 3.5 11.4 5172 2984AV 04655 2983AV 04654 3026AV 04679 3036AVBB 04685
730EBB-120* 21519 4.724 120.0 10 3.5 13 5897 21489 21489 21491 21491 3026AV 04679 3036AVBB 04685
743BB* 19980 5" 5-5/8 5.675 144.1 10 3.5 19 8619 5135AV 05447 5136AV 05448 3026AV 04679 3036AVBB 04685
744BB 50005 6" 6-3/8 6.375 161.9 10 3.5 36 16329 5137AV 50008 5138AV 50006 3026AV 04679 3036AVBB 04685
88
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
SPECIAL APPLICATION PUNCHES
Counter
Nut
Punch Die Draw Stud Ball Bearing
Drive Nut
Other oiltight sizes without notches available in standard, Slug-Buster® and Slug-Splitter® designs.
Oiltight Punches with Notches
Counter
Nut
Punch
Die
Ball Bearing
Drive Nut
Draw Stud
Key Punches
720 Keyway Punch
Eliminates time-consuming hand sawing and filing when making keyways
for push-button switches.
Use as a nibbler to make wider or deeper keyways.
Punches 1/8" (3.2 mm) or 3/16" (4.8 mm) keyways for 7/8" (22.5 mm) or
1-7/32" (30.5 mm) push-button holes.
Canadian Patent No. 1,172,435.
SPECIFICATIONS
Operation Manual
Capacity 10 gauge (3.5 mm) mild steel
2. Place cutting notch inside edge of hole and
cut keyway.
3. Withdraw the punch.
1/8" Deep
Die
Cutting Notch
1/8" Key
Cutting Notch
3/16" Key
Punch
3/32" Deep
4. Use as a nibbler to make wider or
deeper keyways.
1. Locate proper cutting notch on the
cutting head.
3/16"
1/8"
NOTE: Not for Stainless Steel
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers.
CAT./UPC NO
MAXIMUM PUNCH UNIT OPTIONAL
HOLE SIZE CAPACITY (INCLUDES PUNCH, BB MINIMUM ADAPTER FOR
INCH MM MILD STEEL OPERATION DIE DRAW STUD DRAW DRIVE COUNTER PILOT HOLE WEIGHT HYDRAULIC
A B C A B C GA MM TYPE AND NUTS) PUNCH DIE STUD NUT NUT INCH MM LBS. KG. DRIVERS
.875 .125 1.000 22.5 3.2 25.4 14 2.0 Hand/Hydr. 60238 60239 60250 60117 60165 60258 .625 15.9 2.1 .95 60167
1.210 .190 1.380 30.5 4.8 36.0 10 3.5 Hand/Hydr. 60242 60243 60249 60117 60165 60258 625 15.9 2.7 1.2 60167
CAT./UPC NO
MAXIMUM PUNCH UNIT OPTIONAL
HOLE SIZE CAPACITY (INCLUDES PUNCH, BB MINIMUM ADAPTER FOR
INCH MM MILD STEEL OPERATION DIE, DRAW STUD DRAW DRIVE COUNTER PILOT HOLE WEIGHT HYDRAULIC
A B C A B C GA MM TYPE AND NUTS) PUNCH DIE STUD NUT NUT INCH MM LBS. KG. DRIVERS
0.481 0.055 .030 12.2 1.4 .8 16 1.5 Hand/Hydr. 60101 60102 6010360115 60120 05244 .375 9.5 .88 .4 60114
1.171 0.123 .097 29.7 3.1 2.5 14 2.0 Hand/Hydr. 60104 6010560106 60166 60165 60258 .875 23.8 2.3 1.0 60167
1.265 0.156 .097 32.1 4.0 2.5 14 2.0 Hand/Hydr. 60107 601086010960166 60165 60258 .875 23.8 2.4 1.1 60167
1.328 0.102 .097 33.7 2.6 2.5 14 2.0 Hand/Hydr. 60110 60111 60112 60166 60165 60258 .875 23.8 2.4 1.1 60167
For use with any Greenlee Hydraulic Driver or Battery-Powered Driver. For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
720 26534 Keyway Punch 2.8 1.27
26534 26536 Punch
26538 26538 Die
89
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
CAT./UPC NO
MAXIMUM PUNCH UNIT OPTIONAL
CAPACITY (INCLUDES PUNCH, BB MINIMUM ADAPTER FOR
HOLE SIZE MILD STEEL OPERATION DIE, DRAW STUD DRAW DRIVE COUNTER PILOT HOLE WEIGHT HYDRAULIC
INCH MM GA MM TYPE AND NUTS) PUNCH DIE STUD NUT NUT INCH MM LBS. KG. DRIVERS
1/2" 0.500 x 0.500 12.7 x 12.7 16 1.5 Hand/Hydr. 60001 60002 60003 60115 60120 05244 .375 9.5 1.1 .50 60114
5/8" 0.625 x 0.625 15.9 x 15.9 14 2.0 ◊Hand/Hydr. 61004 60005 60006 34421 34733 04638 .500 12.7 1.5 .68 33967
3/4" 0.750 x 0.750 19.1 x 19.1 14 2.0 ◊Hand/Hydr. 61007** 34421 34733 04638 .500 12.7 1.5 .68 33967
7/8" 0.882 x 0.882 22.4 x 22.4 14 2.0 ◊Hand/Hydr. 61010** 34421 34733 04638 .500 12.7 1.8 .82 33967
0.945 x 0.945 24.0 x 24.0 14 2.0 ◊Hand/Hydr. 61013** 34421 34733 04638 .500 12.7 2.3 1.0 33967
1" 1.000 x 1.000 25.4 x 25.4 14 2.0 ◊Hand/Hydr. 60016 60017 60018 60117 60165 60258 .625 15.9 2.4 1.1 60167
1.772 x 1.772 45.0 x 45.0 10 3.5 ◊Hydr. Only 60287 60288 60289 60118 60235 1.188 30.2 6.0 2.7
1-13/16" 1.811 x 1.811 46.0 x 46.0 10 3.5 ◊Hydr. Only 60019 60020 60019 60118 60235 1.188 30.2 6.2 2.8
2" 2.000 x 2.000 50.8 x 50.8 10 3.5 ◊Hydr. Only 60168 60169 60170 60118 60235 1.188 30.2 6.9 3.1
2-11/16" 2.677 x 2.677 68.0 x 68.0 10 3.5 ◊Hydr. Only 60171 60172 60173 60118 60235 1.188 30.2 10.1 4.6
3-5/8" 3.622 x 3.622 92.0 x 92.0 10 3.5 *Hydr. Only 60174 60175 60176 60118 60235 1.188 30.2 14.8 6.7 *
4-1/8" 4.125 x 4.125 104.8 x 104.8 10 3.5 *Hydr. Only.60177 60178 60179 60118 60235 1.188 30.2 18.8 8.5 *
5.433 x 5.433 138.0 x 138.0 14 2.0 *Hydr. Only 60234 60023 60024 60118 60235 1.188 30.2 20 9.1 *
SPECIAL SQUARE
0.886(A) 0.791(B) 22.5 Ø(A ) 20.1(B) 14 2.0 Hand/Hydr. 61125** 34421 34733 04638 .500 12.7 .7 .3 33967
“D” Punches
Draw StudCounter
Nut
Punch Die Ball Bearing
Drive Nut
Square
Special Square Counter
Nut
Punch Die Draw Stud Ball Bearing
Drive Nut
Counter
Nut
Punch Die Draw Stud Ball Bearing
Drive Nut
Double “D” Punches
Square and Special Square Punches
CAT./UPC NO
MAXIMUM PUNCH UNIT OPTIONAL
HOLE SIZE CAPACITY (INCLUDES PUNCH, BB MINIMUM ADAPTER FOR
INCH MM MILD STEEL OPERATION DIE, DRAW STUD DRAW DRIVE COUNTER PILOT HOLE WEIGHT HYDRAULIC
A B A B GA MM TYPE AND NUTS) PUNCH DIE STUD NUT NUT INCH MM LBS. KG. DRIVERS
0.500 0.469 12.7 11.9 16 2.0 Hand/Hydr. 60077 6007860079 60115 60120 05244 .375 9.5 .9 .41 60114
0.625 0.594 15.9 15.1 14 2.0 Hand/Hydr. 61080** 34421 34733 04638 .500 12.7 1.1 .50 33967
0.750 0.703 19.1 19.1 14 2.0 Hand/Hydr. 61083** 34421 34733 04638 .500 12.7 1.2 .50 33967
CAT./UPC NO
MAXIMUM PUNCH UNIT OPTIONAL
HOLE SIZE CAPACITY (INCLUDES PUNCH, BB MINIMUM ADAPTER FOR
INCH MM MILD STEEL OPERATION DIE, DRAW STUD DRAW DRIVE COUNTER PILOT HOLE WEIGHT HYDRAULIC
A B A B GA MM TYPE AND NUTS) STUD NUT NUT INCH MM LBS. KG. DRIVERS
0.769 0.642 19.5 16.3 14 2.0 Hand/Hydr. 61086** 34421 34733 04638 .500 12.7 1.1 .50 33967
0.795 0.697 20.2 17.6 14 2.0 Hand/Hydr. 61089** 34421 34733 04638 .500 12.7 1.1 .50 33967
0.913 0.756 23.2 19.2 14 2.0 Hand/Hydr. 61092** 34421 34733 04638 .500 12.7 1.2 .54 33967
0.913 0.795 23.2 20.2 14 2.0 Hand/Hydr. 61095** 34421 34733 04638 .500 12.7 2.9 33967
1.375 1.125 34.9 28.6 14 2.0 Hand/Hydr. 60098** 60166 60165 60258 .875 23.8 2.5 1.1 60167
For use with any Greenlee Hydraulic Driver or Battery-Powered Driver For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
** Sold as Unit only
For use with any Greenlee Hydraulic Driver or Battery-Powered Driver For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
** Sold as Unit only
*For use with with Hand and Foot Pump Hydraulic Drivers with Ram
p
For use with any Greenlee Hydraulic Driver or Battery-Powered Driver For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
** Sold as Unit only
90
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Counter
Nut Punch Die Draw Stud Ball Bearing
Drive Nut
Electronic Connector Panel Punches
Cut-out and mounting slots are punched in one operation.
Drill only one 7/16" (11.1 mm) pilot hole.
(See page 104 for Kwik Stepper® step bits.)
Fast, accurate panel punching with no sawing or filing required.
Universal size punches for front or back mount of TRW Cinch and
ITT Cannon-type or equivalent connectors in 9, 15, 25, 37 or
50-pin configurations.
SPECIFICATIONS
Capacity 16 gauge (1.5 mm) mild steel; 10 gauge (3.5 mm) aluminum
Operation Manual with a wrench; Quick Draw® and Quick Draw 90® hydraulic driv-
ers, Battery Driver, Ram and Pump hydraulic drivers aluminum
Rectangular Punches
Rectangle
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
* For use with with Hand and Foot Pump Hydraulic Drivers with Ram For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
For use with any Greenlee Hydraulic Driver or Battery-Powered Driver
CAT./UPC NO
MAXIMUM PUNCH UNIT OPTIONAL
CAPACITY (INCLUDES PUNCH, BB MINIMUM ADAPTER FOR
HOLE SIZE MILD STEEL OPERATION DIE, DRAW STUD DRAW DRIVE COUNTER PILOT HOLE WEIGHT HYDRAULIC
INCH MM GA MM TYPE AND NUTS) PUNCH DIE STUD NUT NUT INCH MM LBS. KG. DRIVERS
0.437 x 0.875 11.1 x 22.2 16 1.5 Hand/Hydr. 60025 60026 60027 60115 60120 05244 .375 9.5 1.2 .5 60114
0.670 x 0.749 17.0 x 19.0 14 2.0 Hand/Hydr. 61028 60029 60030 34421 34733 04638 .500 12.7 1.5 .68 33967
0.750 x 1.140 19.1 x 29.0 14 2.0 Hand/Hydr. 60031 60032 60033 60117 60165 60258 .625 15.9 2.3 1.0 60167
0.750 x 1.310 19.1 x 33.3 14 2.0 Hand/Hydr. 60034 600356003660117 60165 60258 .625 15.9 2.3 1.0 60167
0.861 x 1.018 21.9 x 25.9 14 2.0 Hand/Hydr. 60037 600386003960117 60165 60258 .625 15.9 2.3 1.0 60167
0.866 x 1.181 22.0 x 30.0 14 2.0 Hand/Hydr. 60040 60041 6004260117 60165 60258 .625 15.9 2.4 1.1 60167
0.866 x 1.654 22.0 x 42.0 14 2.0 Hand/Hydr. 60043 6004560046 60117 60165 60258 .625 15.9 2.9 1.3 60167
0.990 x 1.140 25.1 x 29.0 14 2.0 Hand/Hydr. 60047 60048 60049 60117 60165 60258 .625 15.9 2.6 1.2 60167
1.250 x 1.380 31.8 x 35.1 14 2.0 Hand/Hydr. 60050 60051 60052 60117 60165 60258 .625 15.9 3.1 1.4 60167
1.312 x 2.625 33.3 x 67.9 10 3.5 Hand/Hydr. 60053 60054 60055 60118 60235 1.188 30.2 5.1 2.3
1.378 x 2.047 35.0 x 52.0 10 3.5 Hand/Hydr. 60056 60057 60058 60118 60235 1.188 30.2 6.1 2.8
1.378 x 2.559 35.0 x 65.0 10 3.5 Hand/Hydr. 60059 60060 60061 60118 60235 1.188 30.2 6.8 3.1
1.378 x 3.228 35.0 x 82.0 14 2.0 Hand/Hydr. 60062 60063 60064 60118 60235 1.188 30.2 7.7 3.5 *
1.378 x 4.409 35.0 x 112.0 14 2.0 Hand/Hydr. 60065 600666006760118 60235 1.188 30.2 9.2 4.2 *
1.811 x 3.622 46.0 x 92.0 10 3.5 Hand/Hydr. 60068 6006960070 60118 60235 1.188 30.2 8.9 4.0 *
2.250 x 3.500 57.2 x 88.9 10 3.5 Hand/Hydr. 60071 600726007360118 60235 1.188 30.2 10.1 4.6 *
2.677 x 5.433 68.0 x 138.0 14 2.0 Hand/Hydr. 60074 600756007660118 60235 1.188 30.2 16.1 7.3 *
PUNCH UNIT DIMENSIONS WEIGHT
CAT. NO. UPC NO. NO. OF
PINS A B C DRAW STUD SQUARE
COUNTER NUT DRIVE NUT LBS. KG
229 34436 9.787"
(20.0 mm)
.982"
(24.9 mm)
.469"
(11.9 mm) 34421 04638 34733 1.4 .64
231 34437 15 1.127"
(28.6 mm)
1.309"
(33.3 mm)
.469"
(11.9 mm) 34421 04638 34733 1.5 .68
RS232 34420 25 1.6555"
(42.0 mm)
1.853"
(47.1 mm)
.469"
(11.9 mm) 34421 04638 34733 2.0 .91
234 34429 37 2.296"
(58.3 mm)
2.497"
(58.3 mm)
.469"
(11.9 mm) 34421 04638 34733 2.0 .91
238 34444 50 2.201"
(55.9 mm)
2.402"
(61.0 mm)
.579"
(14.7 mm) 34421 04638 34733 2.0 .91
91
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
7360SB
7361SB
Knockout Punch Parts Assortment Cabinets
Includes balanced stock of replacement parts in sturdy steel cabinets.
CAT NO. UPC NO. DESCRIPTION
7360SB 34358 Knockout Punch Parts Assortment 1/2" - 2". Includes
Metal Cabinet 14" High, 13" Wide and 14-3/4" Deep, with
4 Drawers.
7361SB 34359 Knockout Punch Parts Assortment 1/2" - 3". Includes
Metal Cabinet 19-1/2" High, 27" Wide and 15" Deep with
4 Drawers.
KNOCKOUT PARTS CABINETS
7360SB/34358 PARTS CABINET INCLUDES
CAT NO. UPC NO. DESCRIPTION QTY.
721-1/2 31756 Slug-Buster® 1/2” Conduit Punch 18
14722 14722 1/2” Conduit Die 12
721-3/4 31757 Slug-Buster® 3/4” Conduit Punch 6
124AV 06972 3/4” Conduit Die 6
721-1 31758 Slug-Buster® 1” Conduit Punch 3
126AV 04011 1” Conduit Die 3
721-1-1/4 31759 Slug-Buster® 1-1/4” Conduit Punch 3
128AV 04013 1-1/4” Conduit Die 3
721-1-1/2 31760 Slug-Buster® 1-1/2” Conduit Punch 2
440AV 04061 1-1/2” Conduit Die 2
721-2 31761 Slug-Buster® 2” Conduit Punch 2
442AV 04063 2” Conduit Die 1
00042 00042 3/8” Drive Screw 12
249AVBB 04040 3/4” Drive Screw 4
304AVBB 04042 3/4” Drive Screw 4
12097 12097 3/8” Adapter Screw 4
20963 20963 3/8” Draw Stud 20
2113B 10109 3/4” Draw Stud 4
31832 31832 Cabinet only 1
7361SB/34359 PARTS CABINET INCLUDES
CAT NO. UPC NO. DESCRIPTION QTY.
721-1/2 31756 Slug-Buster® 1/2” Conduit Punch 18
14722 14722 1/2” Conduit Die 12
721-3/4 31757 Slug-Buster® 3/4” Conduit Punch 6
124AV 06972 3/4” Conduit Die 6
721-1 31758 Slug-Buster® 1” Conduit Punch 6
126AV 04011 1” Conduit Die 6
721-1-1/4 31759 Slug-Buster® 1-1/4” Conduit Punch 6
128AV 04013 1-1/4” Conduit Die 6
721-1-1/2 31760 Slug-Buster® 1-1/2” Conduit Punch 3
440AV 04061 1-1/2” Conduit Die 3
721-2 31761 Slug-Buster® 2” Conduit Punch 3
442AV 04063 2” Conduit Die 2
1429AV 04175 2-1/2” Conduit Punch 1
1430AV 04177 2-1/2” Conduit Die 1
1431AV 04180 3” Conduit Punch 1
1432AV 04183 3” Conduit Die 1
00042 00042 3/8” Draw Stud 12
249AVBB 04040 3/4” Drive Screw 8
304AVBB 04042 3/4” Drive Screw 6
1434AV 04188 5-1/2” x 3/4 Drive Screw 1
1433AVBB 04187 1” Ball Bearing Nut 1
12097 12097 3/8” Adapter Screw 6
30227 30227 7/16” Adapter Screw 2
12099 12099 3/4” Ball Bearing Adapter Screw 2
20963 20963 3/8” Draw Stud 20
2113B 10109 3/4” Draw Stud 6
1557A A 03170 1-1/8” Punch Sleeve 1
3037AV 04686 3-1/2”, 4” & 5” Conduit Bushing 1
1924AA 03248 Short Spacer 4
1925A A 03249 Medium Spacer 4
1926A A 06904 Long Spacer 4
28154 28154 Punch 1/2” HD Slug-Splitter SC1
28155 28155 Die 1/2” HD Slug-Splitter SC1
29451 29451 Draw Stud, 7/16” Stainless Steel 1
31834 31834 Cabinet A only (top) 1
31849 31849 Cabinet B only (bottom) 1
92
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Replacement Draw Studs for Manual Drivers
00042 – 3/8" (9.5 mm) x 1-5/8" (41 mm)
3026AV –
1-1/8" (28.6 mm) x 7-1/2" (190 mm)
1434AV
3/4" (19.0 mm) x
5-1/2" (140 mm)
1675AV Draw Stud – 1/4" (6.4 mm) x 1-3/8" (35 mm)
Replacement Draw Stud Selection Guide
Refer to the ACTUAL SIZE PICTURES and information below when ordering a
replacement draw stud. Sizes given are diameter X length.
DRAW STUDS fOR KNOCKOUTS
304AVBB – 3/4" (19.0 mm) x 2-15/16" (75 mm)
249AVBB – 3/4" (19.0 mm) x 2-1/8" (54 mm)
93
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Replacement Draw Studs for Hydraulic Drivers
1557AA– 1-1/8" (28.6 mm) x 3" (76 mm)
*For use with 746 Hydraulic RAM
1614SS– 3/8" (9.5 mm) x 2-13/16" (71 mm)
33967 (Adapter) – 3/4" (19 mm) x 3/8" (9.5 mm) internal
Replacement Draw Stud Selection Guide
Refer to the ACTUAL SIZE PICTURES and information below when ordering a replacement draw stud.
Sizes given are diameter X length.
60114 (Adapter) – 3/4" (19 mm) x 1/4" (6.35 mm) internal
60167 (Adapter) – 3/4" (19 mm) x 1/2" (12.7 mm) internal
20963 – 3/8" (9.5 mm)
to 3/4" (19.0 mm)
x 4.8" (122 mm)
2113B – 3/4" (19.0 mm)
x 5.38" (137 mm)
7212SP12 *– 3/4" (19 mm)
x 5.63" (143 mm)
7212SP11 – 3/4" (19 mm)
x 4.77" (121 mm)
94
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
29452 – 3/4" (19.0 mm) x 5-1/2" (140 mm)
29451 – 7/16" (11.1 mm) x 4-1/4" (108 mm)
31872 – 3/4" (19 mm) x 4-1/2" (114.3 mm)
Replacement Draw Studs for Ratchet Drivers
Replacement Draw Studs for Hydraulic Drivers (continued)
12099 – 3/4" (19.0 mm) x 4-3/4" (121 mm)
12097 – 3/8" (9.5 mm) x 3-1/2" (89 mm)
30227 – 7/16" (11.1 mm) x 3-5/8" (92 mm)
Replacement Draw Stud Selection Guide
Refer to the ACTUAL SIZE PICTURES and information below when ordering a replacement draw stud.
Sizes given are diameter X length.
95
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Replacement Draw Studs for Special Shape Punches
60166 – 1/2" (12.7 mm) x 4-5/8" (117.5 mm)
60117 – 1/2" (12.7 mm) x 4-5/8" (117.5 mm)
34421 – 3/8" (9.5 mm) x 3-1/2" (88.9 mm)
60115 – 1/4" (6.3 mm) x 3-7/16" (87.3 mm)
60118 – 3/4" (19 mm)
x 6-3/4" (171.5 mm)
Replacement Draw Stud Selection Guide
Refer to the ACTUAL SIZE PICTURES and information below when ordering
a replacement draw stud. Sizes given are diameter X length.
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers.
60116 – 1/2" (12.7 mm) x 4-5/8" (117.5 mm)
96
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
STUD PUNCHES
ESP710L Stud Punch
• This tool punches 1-11/32" (34.1 mm) diameter holes in 16 and 18 gauge
structural studs.
• Has the ability to punch holes in under 5 seconds
• The ESP710L can take both time and hard work out of the stud punching
process.
• 4" Throat Depth from center of punch.
Plumber Stud Punch
Punches 2-5/8" (66.7 mm) diameter hole in metal studs for
professional-looking installation of 2" water, vent, waste pipes.
Two-speed lever action for fast, easy punching of 24 to 20 gauge thick
metal studs.
2-1/8" (54 mm) throat width fits over most studs and channels.
High strength alloy aluminum c-frame and handle provides lightweight
tool for easy handling–10.6 lb. (4.8 kg).
Lever action punch retraction strips punch out of metal stud fast and easy.
Patent #6,647,630
CAT. NO. UPC NO. DESCRIPTION
ESP710L11 52165 Punch, Stud Bat 120V Charger
BATTERY-POWERED STUD PUNCH
ACTUAL HOLE SIZE WEIGHT LENGTH HEIGHT CAPACITY
CAT. NO. UPC NO. IN. MM LBS. KG IN. MM IN. MM GA MM BATTERY CHARGER
ESP710L11 52165 1-11/32 34.1 9.2 4.2 15 381 11-3/4 298 16 1.5 3.0Ah 18V, Li-Ion 120 Volt
CAT. NO. UPC NO. DESCRIPTION
713 06430 Plumber Stud Punch
08377 08377 Punch for 713
08379 08379 Die for 713
08375 08375 Link
55316 55316 Pin, Groove .31 x 1.75
SPECIFICATIONS
Actual Hole Size
Weight
Length
Height
Capacity
2-5/8" (66.7 mm)
10.6 lbs. (4.8 kg)
23-1/2" (596 mm)
9-3/4" (247 mm)
24-20 GA (0.9 mm)
97
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Metal Stud Punches
Punch up through 20 gauge (0.9 mm) steel studs in one stroke.
Aluminum head provides strength with minimum weight,
reducing operator fatigue.
Contoured handle design gives better operator leverage and makes
it possible to punch in tight places.
Self-stripping design eliminates punch hang-ups.
Automatically centers holes on standard studs.
Conversion kit available to upgrade early models from
24 gauge to 20 gauge maximum capacity.
SPECIFICATIONS
Capacity 709 - 1-5/8" (41.3 mm) and wider studs.
20 gauge (0.9 mm) steel studs.
710 - 2-1/2" (63.4 mm) and wider studs.
20 gauge (0.9 mm) steel studs.
¨
Bushings for Metal Stud Punches
Triple lock design holds bushing securely.
Locks securely into metal studs from 24 gauge to 12 gauge
(0.6 mm to 2.5 mm).
Helps protect wire insulation from sharp edges of metal studs.
Makes pulling smooth and easy by preventing hang-ups of cable
on raw metal edges.
Manual Stud Punch
Punch up through 20 gauge (0.9 mm) steel studs in one stroke.
Unique patented punch rolls the edge over for smooth installation of
armored cable; cable won’t hang up.
Contoured handle design gives better operator leverage and makes it
possible to punch in tight places.
Automatically centers holes on standard studs.
CAT NO. UPC NO. DESCRIPTION
724 10415 Manual Stud Punch
10419 10419 Punch for 724
SPECIFICATIONS
Actual Hole Size
Weight
Length
Height
Capacity
1-1/4" (31.7 mm)
4.0 lbs. (1.8 kg)
16-3/4" (426 mm)
4-1/2" (247 mm)
24-20 GA (0.9 mm)
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
711C 22288 100 Bushings for Hole Punched by 709 for
7/8” (22.2 mm) Diameter Hole
.5 .23
711M 22289 1,000 Bushings for Hole Punched by 709 for
7/8” (22.2 mm) Diameter Hole
3.7 1.7
712A100 05927 100 Bushings for Pre-Punched Hole or
1-11/32” (34.1 mm) Diameter Hole Punched
by 710
1.4 .64
712A1000 05928 1,000 Bushings for Pre-Punched Hole or
1-11/32” (34.1 mm) Diameter Hole Punched
by 710
15.5 7.0
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
709 22280 7/8” (22.2 mm) Diameter Stud Punch 73.2
710 21285 1-11/32” (34.1 mm) Diameter Stud Punch 7. 5 3.5
30968 30968 Conversion Kit – Upgrades Early Model 709 or
710 from 24 to 20 Gauge Maximum Capacity
121AV 04006 Punch for 709
22286 22286 Die for 709
24823 24823 Punch for 710
21297 21297 Die for 710
06015 06015 Pin Kit
36617 36617 Link
05932 05932 Link and Pin Kit (709/710)
21557 21557 Compression Spring
98
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
SPECIFICATIONS
Capacity 1731: Up through 10 gauge (3.0 mm) mild steel with Greenlee
special C-Frame dies and standard punches; 1/2" through 1"
conduit and 15.2 mm through 30.5 mm
1732: Up through 10 gauge (3.0 mm) mild steel with Greenlee Standard
punches and dies; 1/2" through 4" conduit and 15.2 mm through 115.4 mm.
C-fRAME PUNCHES
1731
1731 & 1732 Portable C-Frame Punch Drivers
1731
Great for punching junction boxes and small enclosures.
Punch can be used with ram inside or outside of the junction box.
For use with 1/2" – 1" (22.5 mm – 34.6 mm) conduit size and
accessory sizes only.
Fast, one-shot punching, no predrilling of pilot holes.
Throat measures 8" (203 mm) deep.
1732
Use with 1/2" through 4" conduit size and other round sizes only.
Use with Greenlee standard round punches and dies (optional).
1732
HOLE SIZE KIT CAT./UPC NO.
1731/ 1731H767/ 1731F1725/ 1732/
CAT. NO. UPC NO. DESCRIPTION IN MM PG 15911 20486 25169 27361
C-Frame with Ram
13266 13266 Punch Adapter - 3/8" Ø x 1/2" (9.5 mm)
13267 13267 Punch Adapter - 3/4" Ø x 1" (19.0 mm)
13276 13276 Punch Adapter - 3/8" Ø x 1/2" (9.5 mm)
13277 13277 Punch Adapter - 3/4" Ø x 1" (19.0 mm)
13268 13268 Punch Adapter - 1-1/8" Ø (28.6 mm)
121AV 04006 1/2" Conduit Size Punch 1/2 16 22.5
123AV 04008 3/4" Conduit Size Die 3/4 21 28.3
125AV 04010 1" Conduit Size Punch 1 34.6
12087 12087 C-Frame 1/2" Conduit Size Die 1/2 16 22.5
12086 12086 C-Frame 3/4" Conduit Size Die 3/4 21 28.3
12085 12085 C-Frame 1" Conduit Size Die 1 34.6
1725 1725 1725 Hydraulic Foot Pump
16634 16634 Steel Case
38316 38316 High Pressure Hose Unit - 1/4" x 3'
(includes 1 each of the following 3 items)
54169 54169 1/4' Male Coupler
54170 54170 Dust Cap
06302 06302 High Pressure Hose 1/4" x 3'
11797 11797 Die Adapter - 3/8" Ø (9.5 mm)
11790 11790 Die Adapter - 3/4" Ø (19.0 mm)
11789 11789 Die Adapter - 1-1/8" Ø (28.6 mm)
767 767 Hydraulic Hand Pump
755 755 Hydraulic Hand Pump
37729 37729 Hydraulic Hose - 1/4" x 10' (3 m)
11289 11289 Hydraulic Hose - 3/8" x 6' (9.5 mm x 1.8)
27335 27335 Metal Case
50642 50642 Nut - 3/4" - 10 (19.0 mm)
12079 12079 Frame
15631 15631 Ram
37614 37614 Quick Disconnect
11903 11903 C-Frame
13814 13814 Packing Kit
WEIGHT
CAT NO. UPC NO. DESCRIPTION LBS. KG.
1731 15911 Driver with Ram, 1/2” Through 1” Conduit
(22.5 mm through 34.6 mm) Punches and
Dies
32 15
1732 27361 Driver with Ram, 3/8”, 3/4” and 1-1/8” Punch
and Die Adapters
59 27
1731H767 20486 Same as 1731 with 767 Hydraulic Hand Pump 36 17
1731F1725 25169 Same as 1731 with 1725 Hydraulic Foot Pump 43 20
21316 21316 Pg-9 (15.2 mm) Punch (optional)
18557 18557 Pg-9 (15.2 mm) Die (optional)
17700 17700 Pg-11 (18.6 mm) Punch (optional)
18558 18558 Pg-11 (18.6 mm) Die (optional)
17697 17697 Pg-13 (20.4 mm) Punch (optional)
18559 18559 Pg-13 (20.4 mm) Die (optional)
36282 36282 1-7/32” (30.5 mm) Oil Tight Punch (optional)
37103 37103 1-7/32” (30.5 mm) Oil Tight Die (optional)
99
USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070 www.greenlee.com
= NEW PRODUCT = REPLACEMENT PART = ACCESSORY
B
= BARE TOOL
Hydraulic Hand Pump
Lightweight and portable, for use with Greenlee Punch Drivers.
Versatile, operates in any position.
Single speed.
Rugged steel pump body/reservoir with cast aluminum handle.
Has mounting holes for easy, permanent mounting.
SPECIFICATIONS
Operation Manual – Hand
Capacity 6,500 psi (448 bar), .0823 in³ (13 mm³) per stroke
Length 13" (330 mm)
Width 4" (102 mm)
Height 4" (102 mm)
*NOTE: Must also purchase 30241 Follower
NOTE: See page 100 to select the proper hydraulic hose for this pump.
Hydraulic Foot Pump
Free both hands to position and hold the working tool.
Foot activated release lever.
Hold-down pin keeps pedal down for storage and transport.
Angled base bar keeps the pump upright and stable.
Includes 1/4" (6.4 mm) female coupler with dust cap.
SPECIFICATIONS
Operation Manual – Foot
Capacity 6,500 psi (448 bar), .117 in³ (19 mm³) per stroke
Length 16" (406 mm)
Height Pedal down 6" (152 mm), Pedal up 12" (305 mm)
Width 8" (203 mm)
MANUAL HYDRAULIC PUMPS
WEIGHT
CAT. NO. UPC NO. DESCRIPTION LBS. kg
767 13284 Hydraulic Hand Pump 62.7
04343 04343 Seal Kit Repair for Serial Code ABM
13800 13800 *Seal Kit Repair for Serial Code 55D & Up
30242 30242 *Seal Kit Repair for Serial Code 68BG TO
BG33181628, BG331816 & Up
30241 30241 Reservoir Follower
WEIGHT
CAT. NO. UPC NO. DESCRIPTION LBS. kg
1725 31353 Hydraulic Foot Pump 11 5
24496 24496 Seal Kit w/ RD Serial Code
25214 25214 Seal Kit w/ RU Serial Code
33336 33336 Seal Kit w/ VK Serial Code
NOTE: See page 100 to select the proper hydraulic hose for this pump.
100
KnocKouts
TRUSTED
SINCE
18 6 2 USA CANADA INT’L
FAX 800.451.2632 FAX 800.524.2853 FAX +1.815.397.9247
PHONE 800.435.0786 PHONE 866.384.8813 PHONE +1.815.397.7070
Hydraulic Hose Units
High pressure hydraulic hose units for use with Greenlee hydraulic pumps.
Equipped with couplers and dust caps.
Hydraulic Hose Selection Guide
HYDRAULIC PUMP ACCESSORIES
CAT. NO. UPC NO. DESCRIPTION
05850* 05850 10' X 1/4" Hose With (1) 3/8" Male Coupler and (1) 3/8" Female
Coupler
05851* 05851 10' X 1/4" Non-Conductive Hose with (1) 3/8" Male Coupler
and (1) 3/8" Female Coupler
11289* 11289 6' X 3/8" Hose with (2) 3/8" Male Couplers
17707* 17707 10' X 1/4" Hose with (1) 3/8" Male Coupler and
(1) 1/4" Male Coupler
37729* 37729 10' X 1/4" Hose with (2) 1/4" Male Couplers
38316 38316 3' X 1/4" Hose with (1) 1/4" Male Coupler and
(1) 1/4" NPT Swivel Threaded Fitting
06302 06302 3' X 1/4" Hose with (1) 1/4" NPT Male Threaded Fitting
and (1) 1/4" NPT Swivel Threaded Fitting
COUPLER SET
HOSE UNIT CAT./UPC NO. CAT./UPC NO.
3548GB/
CAT. NO. UPC NO. DESCRIPTION 05850 05851 11289 17707 37729 38316 37614 20573
54167 54167 1/4" (6.4 mm) Female Coupler without Dust Cap 1
54168 54168 1/4" (6.4mm) Dust Cap for Female Coupler 1
54169 54169 1/4" (6.4 mm) Male Coupler without Dust Cap 1 2 1 1
54170 54170 1/4" (6.4 mm) Dust Cap for Male Coupler 1 2 1 1
4018GB 50807 3/8" (9.6 mm) Female Coupler with Dust Cap 1
4033GB 50823 3/8" (9.6 mm) Male Coupler with Dust Cap 2 1 1
41877 41877 3/8" (9.6 mm) Female Coupler without Dust Cap 1 1
41941 41941 3/8" (9.6 mm) Male Coupler without Dust Cap 1 1
41834 41834 3/8" (9.6 mm) Dust Cap for 41941/41877 Couplers 2 2
TOOL CAT. NO./DESCRIPTION TOOL COUPLER PUMP CAT. NO. HOSE CAT./UPC NO.
750 Cable Cutter 1/4" Female Coupler 767 38316
750 Cable Cutter 1/4" Female Coupler 1725 37729
750 Cable Cutter 1/4" Female Coupler 975 17707
777 Bender 3/8" Female Coupler 755, 975, 980 or 960SAPS 11289
782 Bender 3/8" Female Coupler 755 or 975 11289
800 Cable Bender 1/4" Female Coupler 1725 37729
880 Bender 3/8" Female Coupler 755 or 975 11289
882 Bender 3/8" Female Coupler 755 or 975 11289
884 Bender 3/8" Female Coupler 980 or 960SAPS 11289
885 Bender 3/8" Female Coupler 980 or 960SAPS 11289
1731 C-Frame Punch Driver 1/4" Female Coupler 767 38316
1731 C-Frame Punch Driver 1/4" Female Coupler 1725 37729
1731 C-Frame Punch Driver 1/4" Female Coupler 755 or 975 11289
SDK202GL Cable Cutter 3/8" Male Coupler 7475H, 975 or 980 05850, 05851
RK06AT, RK06FT 3/8" Male Coupler 7475H, 975 or 980 05850, 05851
RK1230, RK1240, RK1240K 3/8" Male Coupler 7475H, 975 or 980 05850, 05851
RCCX 3/8" Male Coupler 7475H, 975 or 980 05850, 05851
RK1550 3/8" Male Coupler 7475H, 975 or 980 05850, 05851
* Filled with hydraulic oil.