SNAP TEX Cables and Breakout Boards Features SNAP TEX Family SNAP TEX Cables SNAP TEX cables provide convenient connections from I/O modules to field wiring. Most cables are designed to connect to breakout boards; some cables have flying leads for direct connection to field devices. Description SNAP TEX Breakout Boards SNAP TEX cables and breakout boards are part of the SNAP TEX family of wiring and mounting accessories. These parts save time and expense during installation, maintenance, and debugging by reducing the time and effort required to wire field devices to SNAP I/O modules. SNAP TEX breakout boards move terminals away from the crowded rack area for easier installation and maintenance. Some breakout boards, such as the SNAP-AIMA-HDB, work only with specific modules; others are designed to be used with several types of modules. See tables starting on page 2. Choose the cables and breakout boards for your modules based on the table that starts on page 2. Specifications, dimensions, and wiring diagrams begin on page 5. Part Numbers (continued) Part Breakout Boards SNAP-TEX-32 32-point breakout board for SNAP I/O modules SNAP-TEX-FB16-H 16-point breakout board for SNAP I/O modules, with fuses, fuse-blown indicators, & bussed power (120-240 V) SNAP-TEX-FB16-L 16-point breakout board for SNAP I/O modules, with fuses, fuse-blown indicators, & bussed power (12-24 V) SNAP-TEX-MR10-4 Mechanical relay breakout board for a 4channel SNAP digital output module SNAP-TEX-MR10-16 Mechanical relay breakout board for one high-density or four 4-channel SNAP digital output modules. SNAP-TEX-MR10-16C Mechanical relay breakout board for one high-density or four 4-channel SNAP digital output modules. Header connector connects two boards to one high-density digital module. Optional jumper straps. Part Numbers Part Description Description Cables SNAP-TEX-CBE6 6 ft. (1.8 m), 8-wire cable for SNAP I/O modules. Even terminals commoned SNAP-TEX-CBS6 6 ft. (1.8 m), 8-wire cable for SNAP I/O modules. Straight-through; no common terminals. SNAP-HD-ACF6 6 ft. (1.8 m) wiring harness assembly for SNAP 16-point digital modules SNAP-HD-BF6 6 ft. (1.8 m) wiring harness for 32-channel modules and breakout boards SNAP-HD-CBF6 6 ft. (1.8 m) wiring harness with flying leads for most 32-point modules SNAP-IDC-HDB SNAP-IDC-HDB-FM* Fused breakout board for SNAP 32-point digital input modules SNAP-ODC-HDB SNAP-ODC-HDB-FM* Fused breakout board for SNAP 32-point digital output modules SNAP-HD-G4F6 6 ft. (1.8 m) header cable for SNAP-ODC32-SNK and SNAP-IDC-32 digital modules and G4PB16H and G4PB16HC mounting racks. Also for SNAP-ODC-32-SRC when connecting to a SNAP-MR10-16C breakout board. SNAP-AIMA-HDB SNAP-AIMA-HDB-FM* Breakout boards for SNAP-AIMA-32 and SNAP-AIMA-32-FM analog input modules SNAP-HD-G4F6N 6 ft. (1.8 m) header cable for SNAP-IDC32N digital modules and G4PB16H and G4PB16HC mounting racks SNAP-AIV-HDB SNAP-AIV-HDB-FM* Breakout boards for SNAP-AIV-32 and SNAP-AIV-32-FM analog modules DATA SHEET 6 ft. (1.8 m), 8-wire cable for SNAP I/O modules. Odd terminals commoned Form 1756-130628 SNAP-TEX-CBO6 SNAP TEX Cables and Breakout Boards Extend the terminals on your SNAP I/O modules for easier, cleaner wiring to field devices. Six-foot (1.8 meter) wiring cables plug into tops of I/O modules for quick replacement. Breakout boards offer options such as fusing, power to loads, and mechanical relays. Specialty cables integrate older G4 digital I/O with SNAP PAC I/O. * Factory Mutual approved Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. PAGE 1 SNAP TEX Cables and Breakout Boards Module, Breakout Board, and Cable Compatibility Charts Look in the left column for the module you have. Choose the breakout board in the right columns. Compatible cables are shown in the table cells in the center. 4-Channel Digital Modules DATA SHEET Form 1756-130628 SNAP TEX Cables and Breakout Boards Breakout Board PAGE 2 Module SNAP-TEX-32 SNAP-TEX-FB16-H SNAP-TEX-FB16-L SNAP-TEX-MR10-4 SNAP-TEX-MR10-16 SNAP-TEX-MR10-16C SNAP-TEX-CBO6 SNAP-TEX-CBS6 Not used for inputs Digital input modules--4-channel SNAP-IAC5 SNAP-IAC5A SNAP-IAC5AFM SNAP-IAC5FM SNAP-IAC5MA SNAP-IDC5 SNAP-IDC5-FAST-A SNAP-IDC5-HT SNAP-IDC5-SW SNAP-IDC5-SW-NC SNAP-IDC5D SNAP-IDC5DFM SNAP-IDC5FAST SNAP-IDC5FM SNAP-IDC5G SNAP-IDC5MA SNAP-IDC5Q SNAP-TEX-CBE6 SNAP-TEX-CBO6 SNAP-TEX-CBS6 Digital output modules--4-channel SNAP-ODC5-I SNAP-ODC5-IFM SNAP-ODC5A-I SNAP-ODC5A-IFM SNAP-TEX-CBS6 SNAP-TEX-CBO6 SNAP-TEX-CBE6 SNAP-TEX-CBS6 SNAP-TEX-CBO6 SNAP-TEX-CBO6 SNAP-OAC5-I SNAP-OAC5-IFM SNAP-OAC5MA SNAP-ODC5MA SNAP-TEX-CBS6 SNAP-TEX-CBO6 SNAP-TEX-CBE6 SNAP-TEX-CBS6 SNAP-TEX-CBO6 Not used SNAP-ODC5SRC SNAP-TEX-CBS6 SNAP-TEX-CBO6 SNAP-TEX-CBS6 SNAP-TEX-CBO6 SNAP-TEX-CBO6 SNAP-TEX-CBS6 SNAP-OAC5 SNAP-OAC5FM SNAP-ODC5ASNK SNAP-ODC5R SNAP-ODC5R5 SNAP-ODC5R5FM SNAP-ODC5RFM SNAP-ODC5SNK SNAP-ODC5SNKFM SNAP-ODC5SRCFM SNAP-TEX-CBS6 SNAP-TEX-CBO6 SNAP-TEX-CBS6 SNAP-TEX-CBO6 Not used SNAP-OMR6-A SNAP-OMR6-C Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards Module, Breakout Board, and Cable Compatibility Charts (continued) Look in the left column for the module you have. Choose the breakout board in the right columns. Compatible cables are shown in the table cells in the center. 1-, 2-, and 4-Channel Analog Modules Module Breakout Board SNAP-TEX-FB16-H SNAP-TEX-FB16-L SNAP-TEX-CBS6 SNAP-TEX-CBE6 Not used for analog modules SNAP-TEX-CBS6 Not used for analog modules Analog input modules (not thermocouples) SNAP-AIMV2-4 SNAP-AIV-4 SNAP-AIR40K-4 SNAP-AIMA-4 SNAP-AIMV-4 SNAP-AIMA SNAP-AIV-72 SNAP-AIVRMS SNAP-AIV SNAP-AIARMS SNAP-AICTD SNAP-AIRATE SNAP-AIRTD SNAP-AIRTD-10 SNAP-AIRTD-1K SNAP-AICTD-4 SNAP-AIMA-i SNAP-AIMA2-i SNAP-AIV-i SNAP-AIV2-i SNAP-AIARMS-i SNAP-AIARMS-i-FM SNAP-AIVRMS-i SNAP-AIVRMS-i-FM SNAP-AIPM SNAP-AIPM-3V SNAP-AILC SNAP-AILC-2 SNAP-pH/ORP SNAP-AIMA-iSRC SNAP-AIMA-iSRC-FM SNAP-AIPM-3* SNAP-AITM-i ** SNAP-AITM2-i ** SNAP-AITM-4i ** SNAP-AITM ** SNAP-AITM-2 ** No cable available Not used for analog modules Analog output modules SNAP-AOA-23 SNAP-AOA-28 SNAP-AOA-3 SNAP-AOV-25 SNAP-AOV-27 SNAP-AOV-5 SNAP-AOA-23-iSRC SNAP-AOA-23-iSRC-FM SNAP-AOD-29 SNAP-TEX-CBS6 Not used for analog modules SNAP-TEX-CBS6 SNAP-TEX-CBE6 Not used for analog modules SNAP TEX Cables and Breakout Boards SNAP-TEX-MR10-4 SNAP-TEX-MR10-16 SNAP-TEX-MR10-16C SNAP-TEX-32 * Not recommended for use with breakout boards due to CT safety concerns. ** Do not use breakout boards with thermocouples. High-Density Digital Modules Breakout Board Module SNAP-HD-ACF6 (2 modules/board) SNAP-HD-ACF6 SNAP-TEX-MR10-4 SNAP-TEX-MR10-16 SNAP-TEX-MR10-16C SNAP-IDC-HDB SNAP-ODC-HDB SNAP-IDC-HDB-FM SNAP-ODC-HDB-FM Without a breakout board SNAP-HD-ACF6 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Form 1756-130628 SNAP-IAC-16 SNAP-IAC-A-16 SNAP-IAC-K-16 SNAP-IDC-16 SNAP-IDC-HT-16 SNAP-TEX-FB16-H SNAP-TEX-FB16-L DATA SHEET SNAP-TEX-32 PAGE 3 SNAP TEX Cables and Breakout Boards Breakout Board Module SNAP-TEX-32 DATA SHEET SNAP-HD-CBF6 SNAP-HD-CBF6 (2 boards/module) SNAP-HD-CBF6 SNAP-HD-CBF6 (2 boards/module) SNAP-TEX-MR10-4 SNAP-TEX-MR10-16 SNAP-TEX-MR10-16C SNAP-IDC-HDB SNAP-ODC-HDB SNAP-IDC-HDB-FM SNAP-ODC-HDB-FM SNAP-HD-BF6 SNAP-ODC-32-SNK SNAP-ODC-32-SNK-FM Without a breakout board SNAP-HD-CBF6 Do not use SNAP-ODC-32-SRC SNAP-ODC-32-SRC-FM SNAP-HD-BF6 SNAP-HD-CBF6 SNAP-HD-G4F6 (MR10-16C only) SNAP-HD-CBF6 Analog Modules with More Than 4 Points SNAP-AITM-8 SNAP-AITM-8-FM SNAP-AIV-8 SNAP-AIMA-8 SNAP-AICTD-8 Can be used; no cable Not used with analog modcurrently available ules SNAP-AIV-32 SNAP-AIV-32-FM SNAP-HD-CBF6 SNAP-AIMA-32 SNAP-AIMA-32-FM Not recommended SNAP-HD-BF6 Without a breakout board SNAP-AIV-HDB SNAP-AIV-HDB-FM SNAP-AIMA-HDB SNAP-AIMA-HDB-FM SNAP-ODC-HDB SNAP-ODC-HDB-FM SNAP-IDC-HDB SNAP-IDC-HDB-FM SNAP-TEX-MR10-4 SNAP-TEX-MR10-16 SNAP-TEX-MR10-16C SNAP-TEX-FB16-H SNAP-TEX-FB16-L Module SNAP-TEX-32 Breakout Board SNAP-HD-CBF6 Not used with analog modules SNAP-HD-BF6 Not recommended Form 1756-130628 SNAP TEX Cables and Breakout Boards SNAP-IDC-32 SNAP-IDC-32-FM SNAP-IDC-32N SNAP-IDC-32D SNAP-IDC-32DN SNAP-TEX-FB16-H SNAP-TEX-FB16-L PAGE 4 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-TEX-CBO6, SNAP-TEX-CBE6, SNAP-TEX-CBS6 Cables These three cables provide neat, protected wiring from the top of the module to the breakout board. Each cable snaps into the top of one module and terminates at the breakout board with 18-gauge, color-coded flying leads, already stripped and ready for wiring. The leads attach easily to the breakout board with spring connectors. SNAP-TEX-CBS6--No common terminals; wiring is straight through. See the table starting on page 2 to determine the correct cable for your module and breakout board. This photo shows the contrast between a regularly wired SNAP PAC rack (at upper left) and one using SNAP-TEX-CBE6, -CBO6, and -CBS6 cables (at lower right). The cables protect top-of-module connections and wires, and make it easier to follow wiring to field devices. Cables terminate in color-coded flying leads, already stripped and ready for wiring. SNAP TEX Cables and Breakout Boards SNAP-TEX-CBO6--Odd-numbered terminals are commoned. SNAP-TEX-CBE6--Even-numbered terminals are commoned. Installation, maintenance, and troubleshooting are faster and simpler using the SNAP TEX cables. Form 1756-130628 DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. PAGE 5 SNAP TEX Cables and Breakout Boards SNAP-TEX-CBO6, SNAP-TEX-CBE6, SNAP-TEX-CBS6 Cables (continued) Cable Specifications SNAP TEX Cables and Breakout Boards Feature SNAP-TEX-CBO6 SNAP-TEX-CBE6 Cable length 6 feet (1.8 meters) 6 feet (1.8 meters) Connector 8 pins, 0.2 in. (5.08 mm) centerto-center 8 pins, 0.2 in. (5.08 mm) center-to- 8 pins, 0.2 in. (5.08 mm) centercenter to-center Wires 8 pre-stripped, color-coded, 18 gauge 8 pre-stripped, color-coded, 18 gauge 8 pre-stripped, color-coded, 18 gauge Bussing Odd-numbered pins connected Even-numbered pins connected* No connected Agency Approvals CE, RoHS, DFARS CE, RoHS, DFARS CE, RoHS, DFARS Warranty 30 months 30 months 30 months 6 feet (1.8 meters) *Do NOT USE the CBE6 with a SNAP-TEX-FB16-H or -L breakout board. The FB16s have odd-numbered pins connected. Wire Colors Point Pin 1 Color wire Point black 0 Pin Color wire 5 yellow 6 brown 2 2 red 3 blue 4 orange 1 7 red/black 8 blue/black 3 Compatible SNAP I/O Modules See table starting on page 2 for detailed module, cable, and breakout board compatibility. Modules SNAP-TEX-CBO6 SNAP 4-channel digital input and output modules Use with SNAP-TEX-CBE6 SNAP-TEX-CBS6 SNAP 4-channel digital input and SNAP 4-channel digital input output modules modules Most 1-, 2-, and 4-channel analog Isolated and -MA digital output modules modules 4-channel analog modules, except SNAP-AICTD-4 SNAP-AOD-29 Thermocouples Modules with more than 4 points SNAP-AITM family, SNAP-pH/ORP, SNAP-AILC family, SNAP-AIMA-iSRC Form 1756-130628 Fused digital output modules Thermocouples Thermocouples Analog modules DO NOT use with Modules with more than 4 points Analog modules not listed above Modules with more than 4 points DATA SHEET SNAP-TEX-CBS6 PAGE 6 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-HD-ACF6, SNAP-HD-CBF6, and SNAP-HD-BF6 Cables The SNAP-HD-ACF6, SNAP-HD-CBF6, and SNAP-HD-BF6 cables connect 16- and 32-channel modules to field wiring or breakout boards. Each cable is 6 ft. (1.8 m) long. The SNAP-HD-BF6 has connectors at both ends, one for a 32-channel module and the other for a suitable breakout rack. SNAP-HD-CBF6 SNAP-HD-BF6 Cable Specifications See table starting on page 2 for detailed module, cable, and breakout board compatibility. Feature SNAP-HD-ACF6 SNAP-HD-CBF6 SNAP-HD-BF6 6 feet (1.8 meters) 6 feet (1.8 meters) Connectors One 40-pin connector at module end; flying leads at other end One connector at module end; one connector at breakout board end Wires Pre-stripped, color-coded, 22-gauge wires Pre-stripped, color-coded, 24-gauge wires 24 gauge wires Use with Modules: SNAP-IAC-16 SNAP-IAC-A-16 SNAP-IAC-K-16 SNAP-IDC-16 SNAP-IDC-HT-16 Modules: SNAP-IDC-32 SNAP-IDC-32-FM SNAP-IDC-32N SNAP-IDC-32D SNAP-IDC-32DN SNAP-ODC-32-SNK SNAP-ODC-32-SNK-FM SNAP-ODC-32-SRC SNAP-ODC-32-SRC-FM SNAP-AIV-32 SNAP-AIV-32-FM Modules to breakout boards (regular and -FM versions): SNAP-IDC-32 to SNAP-IDC-HDB SNAP-IDC-32N to SNAP-IDC-HDB SNAP-IDC-32D to SNAP-IDC-HDB SNAP-IDC-32DN to SNAP-IDC-HDB SNAP-ODC-32-SNK to SNAP-ODC-HDB SNAP-ODC-32-SRC to SNAP-ODC-HDB SNAP-AIV-32 to SNAP-AIV-HDB SNAP-AIMA-32 to SNAP-AIMA-HDB Agency Approvals CE, RoHS, DFARS CE, RoHS, DFARS CE, RoHS, DFARS Warranty 30 months 30 months 30 months Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Form 1756-130628 6 feet (1.8 meters) Two-connector assembly at module end, each with 16 pins; flying leads at other end DATA SHEET Cable length SNAP TEX Cables and Breakout Boards The SNAP-HD-ACF6 and the SNAP-HD-CBF6 have connectors at one end that attach to the top of a module and flying leads at the other end for field wiring. The ACF6 is for 16-channel modules and the CBF6 is for 32-channel modules. PAGE 7 SNAP TEX Cables and Breakout Boards SNAP-HD-ACF6, SNAP-HD-CBF6, and SNAP-HD-BF6 Cables (continued) Wiring--From SNAP-HD-ACF6 Cable to SNAP 16-Point Digital Module The following diagram shows16-channel module connector wiring for the SNAP-HD-ACF6 wiring harness. Applies to the following modules (top view of module): DATA SHEET SNAP-IAC-16 SNAP-IAC-A-16 SNAP-IAC-K-16 Port for OptoTerminal-G20 Form 1756-130628 SNAP TEX Cables and Breakout Boards SNAP-IDC-16 SNAP-IDC-HT-16 PAGE 8 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-HD-ACF6, SNAP-HD-CBF6, and SNAP-HD-BF6 Cables (continued) Wiring--SNAP-HD-CBF6 Cable The following table shows 32-channel module connector wiring for the SNAP-HD-CBF6 wiring harness. Wires from the wiring harness are grouped into four sets. Each set contains color-coded wires. Set A Point Wires Set C Point Wires Set D Point Wires Poin t A0 Gray 0 B0 Gray 8 C0 Gray 16 D0 Gray 24 A1 Blue 1 B1 Blue 9 C1 Blue 17 D1 Blue 25 A2 Yellow 2 B2 Yellow 10 C2 Yellow 18 D2 Yellow 26 A3 Red 3 B3 Red 11 C3 Red 19 D3 Red 27 A4 White 4 B4 White 12 C4 White 20 D4 White 28 A5 Violet 5 B5 Violet 13 C5 Violet 21 D5 Violet 29 A6 Green 6 B6 Green 14 C6 Green 22 D6 Green 30 A7 Orange 7 B7 Orange 15 C7 Orange 23 D7 Orange 31 ACOM Blk/Brn com BCOM Blk/Brn com CCOM Blk/Brn com DCOM Blk/Brn com The four sets relate to point numbers on the module as shown below. Signal A4 A5 A6 A7 ACOM B4 B5 B6 B7 BCOM C4 C5 C6 C7 CCOM D4 D5 D6 D7 DCOM Pin Number 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1 Harness Wire Color White Violet Green Orange Brown White Violet Green Orange Brown White Violet Green Orange Brown White Violet Green Orange Brown Connector wiring for SNAP-ODC-32-SNK, SNAP-ODC-32-SRC, SNAP-IDC-32, -FM versions, SNAP-IDC-32N, and SNAP-IDC-32DN (top view of module) Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Form 1756-130628 Signal A0 A1 A2 A3 ACOM B0 B1 B2 B3 BCOM C0 C1 C2 C3 CCOM D0 D1 D2 D3 DCOM DATA SHEET Harness Pin Wire Color Number Gray 40 Blue 38 Yellow 36 Red 34 Black 32 Gray 30 Blue 28 Yellow 26 Red 24 Black 22 Gray 20 Blue 18 Yellow 16 Red 14 Black 12 Gray 10 Blue 8 Yellow 6 Red 4 Black 2 SNAP TEX Cables and Breakout Boards Wires Set B PAGE 9 SNAP TEX Cables and Breakout Boards SNAP TEX Cables and Breakout Boards SNAP-HD-G4F6 and SNAP-HD-G4F6N Cables The SNAP-HD-G4F6 and SNAP-HD-G4F6N cables are used to connect a SNAP high-density digital (HDD) module to G4 mounting racks in order to integrate older G4 (or even G1) digital output systems with modern PAC Project software and SNAP PAC Ethernet-based controllers. The header cable connects two 16-channel mounting racks to one 32-channel digital module. The cable can also be used to connect G1 mounting racks with header connectors to these modules. See the table below for module and rack compatibility. For outputs, this connection makes available the G4 output's up to 3-amp switching and sensing capability, which can provide twelve times the 0.25 amp capability of the highdensity digital modules themselves. (For details of individual G4 module capabilities, see Opto 22 form #727, the G4 Digital I/O Data Book.) The SNAP-HD-G4F6 cable can also be used to connect two SNAP-TEX-MR10-16C breakout boards to one 32-channel digital module. See "SNAP-TEX-MR10-16C Breakout Board" on page 19. For more information on HDD modules, see form #1556, the SNAP High-Density Digital Module Data Sheet. SNAP-HD-G4F6 header cable G4PB16H mounting racks SNAP-ODC-32SNK module In this photo, the SNAP-HD-G4F6 header cable connects a single SNAP-ODC-32-SNK digital output module on a SNAP PAC mounting rack to two G4PB16H mounting racks. SNAP mounting rack NOTE: Do not use this cable with a SNAP-ODC-32-SRC module when connecting to G4 mounting racks. SNAP-HD-G4F6 and SNAP-HD-G4F6N Cables--Compatible Modules and Racks Cable Modules Racks Integrated I/O SNAP-HD-G4F6 SNAP-ODC-32-SNK G4PB16H SNAP-ODC-32-SNK-FM G4PB16HC PB16H PB16HC SNAP-HD-G4F6N SNAP-IDC-32N* SNAP-IDC-32DN* PB16H PB16HC G4PB16H G4PB16HC G4PB16L PB16L - DATA SHEET Form 1756-130628 * For 15 volt or 24 volt G1 or G4 modules, use the SNAP-IDC-32N. For 5 volt modules, use the SNAP-IDC-32DN. PAGE 10 NOTE: While not designed for this use, it is possible to connect the SNAP-IDC-32 module with G4 15 or 24 V inputs using a SNAP-HD-G4F6 cable. However, the SNAP-IDC-32 uses positive-true logic and therefore returns the inverse of the typical negative-true logic. For example, if the SNAP-IDC-32 is controlled by a PAC Control strategy, an "OFF" state from it actually indicates that the associated G4 module is turned ON. Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-TEX-32, SNAP-TEX-FB16-H, SNAP-TEX-FB16-L Breakout Boards you're using. These breakout boards are used primarily for digital inputs and outputs. The SNAP-TEX-32 is a simple breakout board with straightthrough wiring. Designed primarily for 2- and 4-channel analog inputs/outputs and for 4-channel digital inputs, the breakout board is used with SNAP-TEX cables. CAUTION: Odd pins on the SNAP-TEX-FB16-H and SNAP-TEXFB16-L breakout boards are commoned. Use only straightthrough or odd cables with these boards. The SNAP-TEX-FB16-H and SNAP-TEX-FB16-L breakout boards provide a fuse and a fuse-blown indicator for each of their 16 channels. In addition, they provide power to loads: the SNAP-TEX-F16-H provides 120-240 volts, and the SNAPTEX-F16-L provides 12-24 volts. Simply attach the power source to a single spot in the middle of the rack, and power goes out to solenoids or switches, depending on the module SNAP-TEX-FB16-H Specifications See the table beginning on page 2 for recommended cable and board combinations. Feature SNAP-TEX-32 SNAP-TEX-FB16-H SNAP-TEX-FB16-L Use with I/O modules 2- or 4-channel analog inputs/ outputs; 4-channel digital inputs/ outputs * 4-channel digital inputs and outputs 16- and 32-ch digital inputs/outputs 4-channel digital inputs and outputs 16- and 32-ch digital inputs/outputs Use with cables SNAP-TEX-CBE6 (even pins connected), SNAP-TEX-CBO6 (odd pins connected), or SNAPTEX-CBS6 (no connections), depending on module. 4-ch modules: SNAP-TEX-CBO6 (odd pins connected)** or SNAPTEX-CBS6 (straight-through), depending on module. 16-ch modules: SNAP-HD-ACF6 32-ch modules: SNAP-HD-CBF6 4-ch modules: SNAP-TEX-CBO6 (odd pins connected)** or SNAPTEX-CBS6 (straight-through), depending on module. 16-ch modules: SNAP-HD-ACF6 32-ch modules: SNAP-HD-CBF6 Connectors 32 spring connectors; accommodates eight 4-channel modules 16 spring connectors; accommodates four 4-channel modules 16 spring connectors; accommodates four 4-channel modules Fusing none 1 A, 250 V, fast-acting fuse for each I/O point (16 total). Replace with Opto 22 PN FUSE01G4 1 A, 250 V, fast-acting fuse for each I/O point (16 total). Replace with Opto 22 PN FUSE01G4 Indicators none 1 LED per fuse (16 LEDs total) 1 LED per fuse (16 LEDs total) Bussed power none 120-240 V 12-24 V Agency ApprovCE, RoHS, DFARS als CE, RoHS, DFARS CE, RoHS, DFARS Warranty 30 months 30 months 30 months (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Form 1756-130628 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com DATA SHEET * Can also be used with 8-, 16-, or 32-channel digital and analog inputs (not thermocouples). ** IMPORTANT: Do NOT USE the FB16 breakout boards with a SNAP-TEX-CBE6 cable. The board has odd pins connected; the cable has even pins connected. SNAP TEX Cables and Breakout Boards The SNAP-TEX-32 can also be used with 8-, 16-, or 32-channel SNAP analog modules (not thermocouples). See the table beginning on page 2 for recommended cable and board combinations for your modules. PAGE 11 SNAP TEX Cables and Breakout Boards SNAP-TEX-F32, SNAP-TEX-FB16-H, SNAP-TEX-FB16-L (continued) Dimensions--SNAP-TEX-32 Breakout Board DATA SHEET Dimensions--SNAP-TEX-FB16-H and SNAP-TEX-FB16-L Breakout Boards Dimensions are shown in inches (with centimeters in parentheses). Form 1756-130628 SNAP TEX Cables and Breakout Boards Dimensions are shown in inches (with centimeters in parentheses). PAGE 12 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-TEX-F32, SNAP-TEX-FB16-H, SNAP-TEX-FB16-L (continued) Wiring--SNAP-TEX-32 Breakout Board 1 Black 2 Red SNAP TEX Cables and Breakout Boards 3 Blue 4 Orange 5 Yellow 6 Brown 7 Red/blk 8 Blue/blk This diagram shows wiring with a SNAP-TEX cable going to a 4-channel module. If you are using the breakout board with other cables going to 16- or 32-channel modules, see the cable's data sheet for wire colors and wiring details. Form 1756-130628 (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 13 SNAP TEX Cables and Breakout Boards SNAP-TEX-F32, SNAP-TEX-FB16-H, SNAP-TEX-FB16-L (continued) DATA SHEET This diagram shows wiring with SNAP-CBO6 or SNAP-CBS6 cables coming from 4-channel modules. If you are using the breakout board with a SNAP-HD-CBF6 cable coming from 32channel modules, see page 15. CAUTION: Do NOT use the SNAP-TEXCBE6 (even pins commoned) cable with this board. The board has odd pins commoned. Form 1756-130628 SNAP TEX Cables and Breakout Boards Wiring--SNAP-TEX-FB16-H and SNAP-TEX-FB16-L Breakout Boards PAGE 14 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-TEX-F32, SNAP-TEX-FB16-H, SNAP-TEX-FB16-L (continued) Wiring--SNAP-TEX-FB16-L Breakout Board This diagram shows wiring with a SNAP-HD-CBF6 cable coming from a 32-channel module (SNAP-ODC-32SRC or SNAP-ODC-32-SNK). Each module requires two boards. ACOM Black A0 Gray SNAP-HD-CBF6 cable A1 Blue A2 Yellow A3 Red ACOM Brown A4 White A5 Violet A6 Green A7 Orange Fuse Common Module Common BCOM Black B0 Gray For SRC module, module common is positive, and field commons (1, 3, 5, and 7) are negative. SNAP TEX Cables and Breakout Boards If you are using the board with 4-channel modules, see the previous page.. B1 Blue B2 Yellow For SNK module, module common is negative, and field commons (1, 3, 5, and 7) are positive. B3 Red BCOM Brown B4 White Form 1756-130628 B6 Green B7 Orange Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET B5 Violet PAGE 15 SNAP TEX Cables and Breakout Boards SNAP-TEX-MR10-4 and SNAP-TEX-MR10-16 Breakout Boards DATA SHEET These breakout boards include on/off indicators for each channel, and each channel can be wired for normally closed or normally open. The boards require 24 VDC power. A replacement relay is available, part number SNAP-MR10. Also see "SNAP-TEX-MR10-16C Breakout Board" on page 19. SNAP-TEX-MR10-16 Specifications See the tables beginning on page 2 for compatible modules and cables. Feature SNAP-TEX-MR10-4 SNAP-TEX-MR10-16 Use with I/O modules SNAP-ODC5-i, SNAP-ODC5A-i, SNAP-ODC5SRC, SNAP-ODC-32-SRC SNAP-ODC5-i, SNAP-ODC5A-i, SNAP-ODC5SRC, SNAP-ODC-32-SRC Use with cables SNAP-TEX-CBO6 (odd pins bussed),SNAP-TEXCBS6 (no bussing), or SNAP-HD-CBF6, depending on module. SNAP-TEX-CBO6 (odd pins bussed),SNAP-TEXCBS6 (no bussing), or SNAP-HD-CBF6, depending on module. SPDT (1 Form C) SPDT (1 Form C) Typical life expectancy (Electrical): 1 x 105 Typical life expectancy (Electrical): 1 x 105 Switching capacity 10 A @ 240 VAC 10 A @ 240 VAC Switch On time 7 ms nominal 7 ms nominal Switch Off time 3 ms nominal 3 ms nominal Fusing 24 V fuse for board. Opto 22 p/n SNAP-FUSE1AC 24 V fuse for board. Opto 22 p/n SNAP-FUSE1AC Indicators 4 On/Off status indicators (one for each channel) 1 fuse-blown indicator 16 On/Off status indicators (one for each channel) 1 fuse-blown indicator Power requirements (all positions On) 24 VDC @ 75 mA 24 VDC @ 300 mA Relay contacts Agency Approvals CE, RoHS, DFARS CE, RoHS, DFARS Warranty 30 months from date of manufacture 30 months from date of manufacture Form 1756-130628 SNAP TEX Cables and Breakout Boards The SNAP-TEX-MR10-4 and SNAP-TEX-MR10-16 breakout boards, designed for high-current switching, feature mechanical relays that can switch up to 10 A per channel. (Standard SNAP output modules can switch up to 0.75 A; SNAP-OMR6 output modules can switch up to 6 A.) PAGE 16 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-TEX-MR10-4 and SNAP-TEX-MR10-16 Breakout Boards (continued) Dimensional Drawing--SNAP-TEX-MR10-16 Breakout Board Dimensions are shown in inches (with centimeters in parentheses). Dimensions are shown in inches (with centimeters in parentheses). SNAP TEX Cables and Breakout Boards Dimensional Drawing--SNAP-TEX-MR10-4 Breakout Board Form 1756-130628 (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 17 SNAP TEX Cables and Breakout Boards SNAP-TEX-MR10-4 and SNAP-TEX-MR10-16 Breakout Boards (continued) Wiring Diagram--SNAP-TEX-MR10-4 Breakout Board DATA SHEET This board can also be used with other modules and cables; see the compatibility tables starting on page 2. Form 1756-130628 SNAP TEX Cables and Breakout Boards The example below shows wiring from the first two points of a SNAP-ODC5-i output module to a SNAP-TEX-MR10-4 board. Wire colors shown are for a SNAP-TEX-CBO6 cable. Wiring is similar for a SNAP-TEX-MR10-16 board, which has 16 channels rather than four. PAGE 18 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-TEX-MR10-16C Breakout Board The SNAP-TEX-MR10-16C breakout board, designed for high-voltage/high-current switching, features mechanical relays that can switch up to 10 A per channel. (Standard SNAP output modules can switch up to 0.75 A; SNAP-OMR6 output modules can switch up to 6 A.) Spring connectors for standard, 4-channel ODC modules This board allows you to connect digital output modules in two ways: SNAP-TEX-MR10-16C * Connect 4 standard four-channel ODC modules using the two spring connectors and the appropriate cable for the Mechanical relays modules. See page 20. * Connect one SNAP-ODC-32-SRC high-density module to the header connectors on two MR10-16C breakout boards. Requires a SNAP-HD-G4F6 cable. Bussed commons in 2-channel groups provide easier wiring of loads. Bussing straps (STRAP2Q and STRAP4Q) can be used for quick common power connections between relay groups. See page 21. Header connector for high-density SNAP-ODC-32-SRC module Field connectors A replacement relay is available, part number SNAP-MR10. Also see "SNAP-TEX-MR10-4 and SNAP-TEX-MR10-16 Breakout Boards" on page 16. Specifications Also see the tables beginning on page 2 for compatible modules and cables. Feature Use with I/O modules SNAP-TEX-MR10-16C SNAP-ODC5-i, SNAP-ODC5A-i, SNAP-ODC5SRC, SNAP-ODC-32-SRC * Use with cables * Use with jumper straps SNAP TEX Cables and Breakout Boards This breakout board includes on/off indicators for each channel, and each channel can be wired for normally closed or normally open. The boards require 24 VDC power. For one high-density SNAP-ODC-32-SRC module, use a SNAP-HD-G4F6 cable to connect two breakout boards to one SNAP-ODC-32-SRC module. For four standard modules, use SNAP-TEX-CBO6 (odd pins bussed),SNAP-TEXCBS6 (no bussing), or SNAP-HD-CBF6, depending on module. STRAP2Q, STRAP4Q SPDT (1 Form C) Relay contacts Typical life expectancy (Electrical): 1 x 105 Switching capacity 10 A @ 250 VAC Switch On time 7 ms nominal Switch Off time 3 ms nominal Indicators Power requirements (all positions On) 24 VDC @ 300 mA Agency Approvals CE, RoHS, DFARS Warranty 30 months from date of manufacture Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Form 1756-130628 24 V fuse for board. Opto 22 p/n SNAP-FUSE1AC 16 On/Off status indicators (one for each channel) 1 fuse-blown indicator DATA SHEET Fusing PAGE 19 SNAP TEX Cables and Breakout Boards SNAP-TEX-MR10-16C Breakout Board (continued) Dimensional Drawing--SNAP-TEX-MR10-16C Breakout Board SNAP TEX Cables and Breakout Boards Dimensions are shown in inches (with centimeters in parentheses). Wiring Diagram--Connecting Four-Channel ODC Modules to SNAP-TEX-MR10-16C The example below shows wiring a SNAP-ODC5-i output module to a SNAP-TEX-MR10-16C board. Two four-channel ODC modules can be wired to each of the two spring connectors. Wire colors shown are for a SNAP-TEX-CBO6 cable. This board can also be used with other modules and cables; see the compatibility tables starting on page 2. Jumpers required for the SNAP-ODC5-I module. They are not required for the SNAP-ODC5SRC. Pins 4-7 to the next ODC module FUSED +24V DATA SHEET Form 1756-130628 + + PAGE 20 + - 24V INPUT SNAP-ODC5-i Wire colors shown are for SNAP-TEX-CBO6 One of two spring connectors Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-TEX-MR10-16C Breakout Board (continued) Wiring Diagram--SNAP-TEX-MR10-16C Relay Group The diagram below shows relays 0 and 1 in a relay group. C SNAP TEX Cables and Breakout Boards NO NO NC NC NO NO 0 C 1 NC NC Terminals 0 and 1 Jumper Straps--SNAP-TEX-MR10-16C Breakout Board This diagram shows an example using jumper straps, Opto 22 part numbers STRAP2Q and STRAP4Q. GROUP A COMMON C NO 1 NC C NO 3 NC NO 4 NC C NO 5 NC NO 6 NC C NO 7 NC GROUP B NO COMMON 8 NC C NO 9 NC NO 10 NC C NO 11 NC NO 12 NC C NO 13 NC NO 14 NC C NO 15 NC STRAP2Q STRAP4Q Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Form 1756-130628 STRAP4Q NO 2 NC DATA SHEET Traces on board NO 0 NC PAGE 21 SNAP TEX Cables and Breakout Boards SNAP-IDC-HDB and SNAP-ODC-HDB Breakout Boards DATA SHEET Form 1756-130628 SNAP TEX Cables and Breakout Boards SNAP-IDC-HDB, SNAP-IDC-HDB-FM, SNAP-ODC-HDB, and SNAP-ODC-HDB-FM breakout boards provide LED indicators and easily accessible fused connectors for points on 32channel digital input or output modules. PAGE 22 See Opto 22 form 1547, the High-Density Module User's Guide, for SNAP-IDC-HDB and SNAP-ODC-HDB breakout rack wiring and jumper settings. Specifications SNAP-IDC-HDB and SNAP-IDC-HDB-FM Breakout Racks for High-Density Digital Input Modules Used with SNAP-IDC-32, SNAP-IDC-32-FM, SNAP-IDC-32N, and SNAP-IDC-32DN Connectors 40-pin header connects to 32-channel input module using SNAP-HD-BF6 header cable. 32 signal input connectors; each signal connector has a corresponding common connector. For each zone of 8 signal inputs, 1 connection for either module common or field common. Indicators 1 LED for each signal input (32 signal LEDs total) 1 power status LED for each zone of 8 signal inputs (4 power LEDs total) Fusing 1 A fuses; 2 fuses for each zone of 8 signal inputs (8 fuses total) Replace with Pudenz 1 A automobile mini-fuse or equivalent. Jumpers For each zone of 8 signal inputs, 1 jumper controls whether module common or field common is used. Voltage 32 VDC maximum, 12-24 VDC nominal Agency Approvals SNAP-IDC-HDB: UL, CE, RoHS, DFARS SNAP-IDC-HDB-FM: FM, CE, RoHS, DFARS Warranty 30 months from date of manufacture SNAP-ODC-HDB and SNAP-ODC-HDB-FM Breakout Racks for High-Density Digital Output Modules Used with SNAP-ODC-32-SRC, SNAP-ODC-32-SRC-FM, SNAP-ODC-32-SNK, and SNAP-ODC-32-SNK-FM Connectors 40-pin header; connects to 32-channel sourcing or sinking module using SNAP-HD-BF6 header cable. 32 signal output connectors; each signal connector has a corresponding common connector. For each zone of 8 signal outputs, 1 connection for either module common or field common. Indicators 1 LED for each signal output (32 signal LEDs total) 1 power status LED for each zone of 8 signal outputs (4 power LEDs total) Fusing 1 A fuses; 1 fuse for each signal output (32 signal fuses total) Replace with Pudenz 1 A automobile mini-fuse or equivalent. Jumpers For each zone of 8 signal inputs, 1 jumper controls whether module common or field common is used. Voltage 32 VDC maximum, 12-24 VDC nominal Agency Approvals SNAP-ODC-HDB: UL, CE, RoHS, DFARS SNAP-ODC-HDB-FM: FM, CE, RoHS, DFARS Warranty 30 months from date of manufacture Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-IDC-HDB and SNAP-ODC-HDB Breakout Boards (continued) Dimensional Drawings X Z X Z X Z SNAP-IDC-HDB and SNAP-IDC-HDB-FM breakout racks Z Z X X X Z X Z SNAP TEX Cables and Breakout Boards X Z SNAP-ODC-HDB and SNAP-ODC-HDB-FM breakout racks For wiring diagrams and jumper settings, see Opto 22 form 1547, the SNAP High-Density Digital Module User's Guide. Form 1756-130628 (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 23 SNAP TEX Cables and Breakout Boards SNAP-AIMA-HDB and SNAP-AIV-HDB Breakout Boards readings you need. This section applies only with the SNAPAIMA-HDB board. SNAP TEX Cables and Breakout Boards Changing Negative to Positive Values (SNAP-AIMA-HDB board only) To read positive values, when you configure points on the module, choose the scalable option and enter the corresponding positive values, like this: SNAP-AIMA-HDB breakout board SNAP-AIMA-HDB, SNAP-AIMA-HDB-FM, SNAP-AIV-HDB, and SNAP-AIV-HDB-FM breakout boards are primarily designed for use with SNAP-AIMA-32, SNAP-AIMA-32-FM, SNAP-AIV-32, and SNAP-AIV-32-FM analog input modules, respectively. Each of these modules provides 32 input points. The breakout boards provide easy accessibility for wiring points to field devices. Use the SNAP-HD-BF6 cable for wiring connections between the module and the breakout board. Note for the SNAP-AIMA-32 or SNAP-AIMA-32-FM: if you are using one of these modules with loop power (2-wire) devices, connect to the SNAP-AIMA-HDB or SNAP-AIMAHDB-FM rack as shown on page 25. If you are using the SNAP-AIMA-32 (or -FM) with self-powered devices (4-wire), do not use the SNAP-AIMA-HDB (or -FM) boards, which have a current limiter. Instead, wire to the SNAP-AIV-HDB or SNAPAIV-HDB-FM as shown on page 26 (negative common or page 27 (positive common). CAUTION: We strongly recommend that you use a breakout board with the SNAP-AIMA-32 (or -FM) module. Without the board , miswiring of any point on the module can cause severe out-of-warranty damage. The breakout board protects the module from many wiring errors. This may seem odd, but it works. Don't be confused by the "Lower" and "Upper" labels for the values. Positive values sent to the module will be shown as the correct positive values within your PAC Control strategy. Scaling Values Similarly, if you need to scale values for your application, enter the positive values you need. The module's range is 4 to 20 mA. If you want 4 to represent 0 mA and 20 to represent 130 mA, for example, enter those values as shown below: DATA SHEET Form 1756-130628 Working with Module Values PAGE 24 AIMA modules used with a SNAP-AIV-HDB board read normally. However, values on AIMA modules used with a SNAP-AIMA-HDB board are read as negative values. For example, a value of 10 mA on the module will be read as -10 mA. (Note: If no readings appear, try reversing field connections on the board.) Because these readings are negative values, they can be confusing to work with. This section shows you how to easily change them to positive values or scale them to the positive Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-AIMA-HDB Breakout Boards Wiring diagram: SNAP-AIMA-HDB or SNAP-AIMA-HDB-FM board to SNAP-AIMA-32 or SNAP-AIMA-32-FM module This diagram cannot be used with self-sourcing transmitters. Use this diagram only with loop power (2-wire) negative common devices . For self-powered (4-wire) devices, use a SNAP-AIV-HDB board and wiring diagram on page 26 (negative common devices) or page 27 (positive common devices). SNAP TEX Cables and Breakout Boards See "Working with Module Values" on page 24. Form 1756-130628 (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 25 SNAP TEX Cables and Breakout Boards SNAP-AIV-HDB Breakout Boards Wiring diagram: SNAP-AIV-HDB or SNAP-AIV-HDB-FM board to SNAP-AIV-32 or SNAP-AIV-32-FM module SNAP TEX Cables and Breakout Boards NOTE: Also use this diagram to wire the SNAP-AIV-HDB breakout rack to a SNAP-AIMA-32 or SNAP-AIMA-32-FM module, when the module connects to self-powered (4-wire) devices that share a negative common connection. (For positive common devices, use the diagram on page 27.) See the module's data sheet for more information. * DATA SHEET Form 1756-130628 * PAGE 26 * Or 4-wire, 4-20 mA transmitter, if using a SNAPAIMA-32 or SNAP-AIMA-32-FM module with this rack Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. SNAP TEX Cables and Breakout Boards SNAP-AIV-HDB Breakout Boards (continued) Wiring diagram: SNAP-AIV-HDB or SNAP-AIV-HDB-FM board to SNAP-AIMA-32 or SNAP-AIMA-32-FM module SNAP TEX Cables and Breakout Boards NOTE: Use this diagram only when when the module connects to selfpowered (4-wire) devices that share a positive common connection. (For negative common devices, use the diagram on page 26.) See the module's data sheet for more information. Form 1756-130628 (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com PAGE 27 SNAP TEX Cables and Breakout Boards SNAP-AIMA-HDB and SNAP-AIV-HDB Breakout Boards (continued) DATA SHEET Dimensional Drawing--SNAP-AIV-HDB and SNAP-AIV-HDB-FM Breakout Boards Form 1756-130628 SNAP TEX Cables and Breakout Boards Dimensional Drawing--SNAP-AIMA-HDB and SNAP-AIMA-HDB-FM Breakout Boards PAGE 28 Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * www.opto22.com SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2008-2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. More About Opto 22 Products Opto 22 develops and manufactures reliable, flexible, easy-touse hardware and software products for industrial automation, energy management, remote monitoring, and data acquisition applications. OptoEMU Energy Management System The easy-to-use OptoEMU Sensor monitors electrical energy use in your facility and delivers detailed, real-time data you can see, analyze, and use in building and control systems. The Sensor can monitor energy data from pulsing meters, electrical panels or subpanels, and equipment. View energy data online using a software service or incorporate the data into your control system for complete energy management. SNAP PAC System Designed to simplify the typically complex process of selecting and applying an automation system, the SNAP PAC System consists of four integrated components: * SNAP PAC controllers * PAC ProjectTM Software Suite * SNAP PAC brains * SNAP I/OTM SNAP PAC Controllers Programmable automation controllers (PACs) are multifunctional, modular controllers based on open standards. Opto 22 has been manufacturing PACs for over two decades. The standalone SNAP PAC S-series, the rack-mounted SNAP PAC R-series, and the software-based SoftPACTM all handle a wide range of digital, analog, and serial functions for data collection, remote monitoring, process control, and discrete and hybrid manufacturing. SNAP PACs are based on open Ethernet and Internet Protocol (IP) standards, so you can build or extend a system easily, without the expense and limitations of proprietary networks and protocols. Wired+WirelessTM models are also available. PAC Project Software Suite Opto 22's PAC Project Software Suite provides full-featured, cost-effective control programming, HMI (human machine interface) development and runtime, OPC server, and database connectivity software for your SNAP PAC System. Control programming includes both easy-to-learn flowcharts and optional scripting. Commands are in plain English; variables and I/O point names are fully descriptive. PAC Project Basic offers control and HMI tools and is free for download on our website, www.opto22.com. PAC Project Professional, available for separate purchase, adds one SoftPAC, OptoOPCServer, OptoDataLink, options for controller redundancy or segmented networking, and support for legacy Opto 22 serial misticTM I/O units. SNAP PAC Brains While SNAP PAC controllers provide central control and data distribution, SNAP PAC brains provide distributed intelligence for I/O processing and communications. Brains offer analog, digital, and serial functions, including thermocouple linearization; PID loop control; and optional high-speed digital counting (up to 20 kHz), quadrature counting, TPO, and pulse generation and measurement. SNAP I/O I/O provides the local connection to sensors and equipment. Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module, depending on the type of module and your needs. Analog, digital, and serial modules are all mixed on the same mounting rack and controlled by the same processor (SNAP PAC brain or rack-mounted controller). Quality Founded in 1974, Opto 22 has established a worldwide reputation for high-quality products. All are made in the U.S.A. at our manufacturing facility in Temecula, California. Because we test each product twice before it leaves our factory, rather than only testing a sample of each batch, we can guarantee most solid-state relays and optically isolated I/O modules for life. Free Product Support Opto 22's California-based Product Support Group offers free, comprehensive technical support for Opto 22 products. Our staff of support engineers represents decades of training and experience. Support is available in English and Spanish by phone or email, Monday-Friday, 7 a.m. to 5 p.m. PST. Additional support is always available on our website: how-to videos, OptoKnowledgeBase, self-training guide, troubleshooting and user's guides, and OptoForums. In addition, hands-on training is available for free at our Temecula, California headquarters, and you can register online. Purchasing Opto 22 Products Opto 22 products are sold directly and through a worldwide network of distributors, partners, and system integrators. For more information, contact Opto 22 headquarters at 800-3216786 or 951-695-3000, or visit our website at www.opto22.com. www.opto22.com www.opto22.com * Opto 22 * 43044 Business Park Drive * Temecula, CA 92590-3614 * Form 1335-130530 SALES 800-321-6786 * 951-695-3000 * FAX 951-695-3095 * sales@opto22.com * SUPPORT 800-835-6786 * 951-695-3080 * FAX 951-695-3017 * support@opto22.com (c) 2013 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.