SiHG180N60E
www.vishay.com Vishay Siliconix
S18-0933-Rev. A, 17-Sep-2018 1Document Number: 92141
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E Series Power MOSFET
FEATURES
•4
th generation E series technology
• Low figure-of-merit (FOM) Ron x Qg
• Low effective capacitance (Co(er))
• Reduced switching and conduction losses
• Avalanche energy rated (UIS)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Server and telecom power supplies
• Switch mode power supplies (SMPS)
• Power factor correction power supplies (PFC)
• Lighting
- High-intensity discharge (HID)
- Fluorescent ballast lighting
• Industrial
- Welding
- Induction heating
- Motor drives
- Battery chargers
- Solar (PV inverters)
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature
b. VDD = 120 V, starting TJ = 25 °C, L = 28.2 mH, Rg = 25 , IAS = 2.8 A
c. 1.6 mm from case
d. ISD ID, di/dt = 100 A/μs, starting TJ = 25 °C
PRODUCT SUMMARY
VDS (V) at TJ max. 650
RDS(on) typ. () at 25 °C VGS = 10 V 0.155
Qg max. (nC) 33
Qgs (nC) 7
Qgd (nC) 11
Configuration Single
N-Channel MOSFET
G
D
S
TO-247AC
G
D
S
ORDERING INFORMATION
Package TO-247AC
Lead (Pb)-free and halogen-free SiHG180N60E-GE3
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
PARAMETER SYMBOL LIMIT UNIT
Drain-source voltage VDS 600 V
Gate-source voltage VGS ± 30
Continuous drain current (TJ = 150 °C) VGS at 10 V TC = 25 °C ID
19
ATC = 100 °C 12
Pulsed drain current a IDM 44
Linear derating factor 1.25 W/°C
Single pulse avalanche energy b EAS 111 mJ
Maximum power dissipation PD156 W
Operating junction and storage temperature range TJ, Tstg -55 to +150 °C
Drain-source voltage slope TJ = 125 °C dv/dt 70 V/ns
Reverse diode dv/dt d22
Soldering recommendations (peak temperature) c For 10 s 260 °C
SiHG180N60E
www.vishay.com Vishay Siliconix
S18-0933-Rev. A, 17-Sep-2018 2Document Number: 92141
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
a. Coss(er) is a fixed capacitance that gives the same energy as Coss while VDS is rising from 0 % to 80 % VDSS
b. Coss(tr) is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 % to 80 % VDSS
THERMAL RESISTANCE RATINGS
PARAMETER SYMBOL TYP. MAX. UNIT
Maximum junction-to-ambient RthJA -40
°C/W
Maximum junction-to-case (drain) RthJC -0.8
SPECIFICATIONS (TJ = 25 °C, unless otherwise noted)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT
Static
Drain-source breakdown voltage VDS VGS = 0 V, ID = 250 μA 600 - - V
VDS temperature coefficient VDS/TJReference to 25 °C, ID = 1 mA - 0.63 - V/°C
Gate-source threshold voltage (N) VGS(th) VDS = VGS, ID = 250 μA 3.0 - 5.0 V
Gate-source leakage IGSS
VGS = ± 20 V - - ± 100 nA
VGS = ± 30 V - - ± 1 μA
Zero gate voltage drain current IDSS
VDS = 600 V, VGS = 0 V - - 1 μA
VDS = 480 V, VGS = 0 V, TJ = 125 °C - - 10
Drain-source on-state resistance RDS(on) VGS = 10 V ID = 9.5 A - 0.155 0.180
Forward transconductance agfs VDS = 20 V, ID = 9.5 A - 5.3 - S
Dynamic
Input capacitance Ciss VGS = 0 V,
VDS = 100 V,
f = 1 MHz
- 1085 -
pF
Output capacitance Coss -56-
Reverse transfer capacitance Crss -5-
Effective output capacitance, energy
related a Co(er)
VDS = 0 V to 480 V, VGS = 0 V
-41-
Effective output capacitance, time
related b Co(tr) - 251 -
Total gate charge Qg
VGS = 10 V ID = 9.5 A, VDS = 480 V
-2233
nC Gate-source charge Qgs -7-
Gate-drain charge Qgd -11-
Turn-on delay time td(on)
VDD = 480 V, ID = 9.5 A,
VGS = 10 V, Rg = 9.1
-1428
ns
Rise time tr-4998
Turn-off delay time td(off) -2244
Fall time tf-2346
Gate input resistance Rgf = 1 MHz, open drain 0.3 0.7 1.4
Drain-Source Body Diode Characteristics
Continuous source-drain diode current ISMOSFET symbol
showing the
integral reverse
p - n junction diode
--19
A
Pulsed diode forward current ISM --44
Diode forward voltage VSD TJ = 25 °C, IS = 9.5 A, VGS = 0 V - - 1.2 V
Reverse recovery time trr TJ = 25 °C, IF = IS = 9.5 A,
di/dt = 100 A/μs, VR = 25 V
- 282 564 ns
Reverse recovery charge Qrr -3.67.2μC
Reverse recovery current IRRM -24-A
S
D
G
SiHG180N60E
www.vishay.com Vishay Siliconix
S18-0933-Rev. A, 17-Sep-2018 3Document Number: 92141
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted)
Fig. 1 - Typical Output Characteristics
Fig. 2 - Typical Output Characteristics
Fig. 3 - Typical Transfer Characteristics
Fig. 4 - Normalized On-Resistance vs. Temperature
Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage
Fig. 6 - Coss and Eoss vs. VDS
0
5
10
15
20
25
30
35
40
45
0 5 10 15 20
ID, Drain-to-Source Current (A)
VDS, Drain-to-Source Voltage (V)
TJ= 25 °C
TOP 15 V
14 V
13 V
12 V
11 V
10 V
9 V
8 V
7 V
6 V
BOTTOM 5 V
0
4
8
12
16
20
24
28
32
0 5 10 15 20
ID, Drain-to-Source Current (A)
VDS, Drain-to-Source Voltage (V)
TJ= 150 °C
TOP 15 V
14 V
13 V
12 V
11 V
10 V
9 V
8 V
7 V
6 V
BOTTOM 5 V
0
5
10
15
20
25
30
35
40
45
0 5 10 15 20
ID, Drain-to-Source Current (A)
VGS, Gate-to-Source Voltage (V)
TJ= 150 °C
TJ= 25 °C
VDS= 29.5 V
0
0.5
1.0
1.5
2.0
2.5
3.0
-60 -40 -20 0 20 40 60 80 100 120 140 160
RDS(on), Drain-to-Source On-Resistance
(Normalized)
TJ, Junction Temperature (°C)
ID= 9.5 A
VGS = 10 V
1
10
100
1000
10 000
100 000
0 100200300400500600
C, Capacitance (pF)
VDS, Drain-to-Source Voltage (V)
Ciss
Coss
Crss
VGS = 0 V, f = 1 MHz
Ciss = Cgs+ Cgd, Cdsshorted
Crss = Cgd
Coss = Cds+ Cgd
0
1
2
3
4
5
6
7
8
9
10
100
1000
10 000
0 100 200 300 400 500 600
Coss
Eoss
Eoss, Output Capacitance Stored Energy (μJ)
Coss, Output Capacitance (pF)
VDS, Drain-to-Source Voltage (V)
SiHG180N60E
www.vishay.com Vishay Siliconix
S18-0933-Rev. A, 17-Sep-2018 4Document Number: 92141
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 7 - Typical Gate Charge vs. Gate-to-Source Voltage
Fig. 8 - Typical Source-Drain Diode Forward Voltage
Fig. 9 - Maximum Safe Operating Area
Note
a. VGS > minimum VGS at which RDS(on) is specified
Fig. 10 - Maximum Drain Current vs. Case Temperature
Fig. 11 - Temperature vs. Drain-to-Source Voltage
0
3
6
9
12
0 7 14 21 28
VGS, Gate-to-Source Voltage (V)
Qg, Total Gate Charge (nC)
VDS= 480 V
VDS= 300 V
VDS= 120 V
0.1
1
10
100
0.2 0.4 0.6 0.8 1.0 1.2 1.4
ISD, Reverse Drain Current (A)
VSD, Source-Drain Voltage (V)
TJ= 150 °C
TJ= 25 °C
VGS = 0 V
0.01
0.1
1
10
100
1000
1101001000
ID, Drain Current (A)
VDS, Drain-to-Source Voltage (V)
Limited by RDS(on)
a
1 ms
IDM limited
TC= 25 °C,
TJ= 150 °C,
single pulse
BVDSS limited
10 ms
100 μs
Operation in this area
limited by RDS(on)
0
4
8
12
16
20
25 50 75 100 125 150
ID, Drain Current (A)
TC, Case Temperature (°C)
575
600
625
650
675
700
725
750
775
-60 -40 -20 0 20 40 60 80 100 120 140 160
VDS, Drain-to-Source Breakdown Voltage (V)
TJ, Junction Temperature (°C)
ID= 250 μA
SiHG180N60E
www.vishay.com Vishay Siliconix
S18-0933-Rev. A, 17-Sep-2018 5Document Number: 92141
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 12 - Normalized Transient Thermal Impedance, Junction-to-Case
Fig. 13 - Switching Time Test Circuit
Fig. 14 - Switching Time Waveforms
Fig. 15 - Unclamped Inductive Test Circuit
Fig. 16 - Unclamped Inductive Waveforms
Fig. 17 - Basic Gate Charge Waveform
Fig. 18 - Gate Charge Test Circuit
0.01
0.1
1
0.0001 0.001 0.01 0.1 1
Normalized Effective Transient
Thermal Impedance
Pulse Time (s)
Duty cycle = 0.5
0.2
0.1
0.05
0.02
Single pulse
Pulse width ≤ 1 μs
Duty factor ≤ 0.1 %
RD
VGS
Rg
D.U.T.
10 V
+
-
VDS
VDD
VDS
90 %
10 %
VGS
td(on) trtd(off) tf
Rg
IAS
0.01 Ω
tp
D.U.T.
L
VDS
+
-VDD
10 V
Vary tp to obtain
required IAS
IAS
VDS
VDD
VDS
tp
QgsQgd
Qg
VG
Charge
10 V
D.U.T.
3 mA
VGS
VDS
IGID
0.3 μF
0.2 μF
50 kΩ
12 V
Current regulator
Current sampling resistors
Same type as D.U.T.
+
-
SiHG180N60E
www.vishay.com Vishay Siliconix
S18-0933-Rev. A, 17-Sep-2018 6Document Number: 92141
For technical questions, contact: hvm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 19 - For N-Channel
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?92141.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED