59145-4-V-05-F - Littelfuse Inc

Speciﬁcations are subject to change without notice.

Reed Sensors

Flange Mounting Sensor > 59145

59145 Flange Mount Sensor + 57145 Actuator

Description

The 59145 is a flange mounting reed sensor 28.57mm x 19.05mm x 6.35mm

(1.125” x 0.750” x 0.250”) with a choice of normally open, normally open high

voltage, normally closed or changeover contacts. It’s case design enables screw

or adhesive mounting and the wires exit from top right hand side. It is also

available with left hand exit - see 59150 Series. It is capable of switching up to

265Vac/300Vdc at 10VA. The 59145 functions best with the matching

actuator 57145-000.

Agency Approvals

Agency Agency File Number

E61760

Features

• Two-part magnetically operated

proximity sensor

• Customer defined sensitivity option

• Choice of cable and connector

Benefits

• Hermetically sealed, magnetically

operated contacts continue to

operate long after optical and other

technologies fail due to

contamination

• No standby power requirement

• Operates through non-ferrous

materials such as wood, plastic or

aluminium

• Simple installation and adjustment

Applications

• Position and limit sensing

• Security system switch

• Linear actuators

• Door switch

Dimensions

Dimensions in mm (inch)

Note: The 57145 Actuator is sold separately.

Note: Contact Littelfuse for specific agency approval ratings.

Schematics Switch Type

1 and 2

Black

Blue

White

Black

28.57

(1.125)

15.88

(.625)

3.43

(.135)

6.35

(.250)

Note: 59145 shown. 59150 leads exit opposite.

3.18x7.82

(.125x.308 LG.)

SLOT 2

14.28

(.562)

28.57

(1.125)

300

(11.81)

6.35 (.250) NOM.

15.88

(.625)

6.35

(.250)

3.18x7.82

(.1

25x.308 LG.)

SLOT 2

4.28

(.562)

9.53

(.375)

19.05

(.75)

3.43

(.1

35)

6.35

(.250)

9.53

(.375)

19.05

(.75)

Actuator

Sensor

Sensors

Actuator

Speciﬁcations are subject to change without notice.

Reed Sensors

Flange Mounting Sensor > 59145

Sensor

Actuator

59145 Flange Mount Sensor + 57145 Actuator

Electrical Ratings

Contact Type Normally

Open Normally Open

High Voltage Change

Over Normally

Closed

Switch Type 1 2 3 4

Contact Rating 1VA/Watt - max. 10 10 5 5

Voltage 4Switching 2

Breakdown 3

Vdc - max.

Vac - max.

Vdc - min.

200

140

250

300

265

400

175

120

200

175

120

200

Current 4Switching 2

Carry

Adc - max.

Aac - max.

Adc - max.

0.5

0.35

1.2

0.4

0.30

1.4

0.25

0.18

1.5

0.25

0.18

1.5

Resistance 5Contact, Initial

Insulation Ω - max.

Ω - min. 0.2

1010 0.2

1090.2

109

Capacitance Contact pF - typ. 0.3 0.2 0.3 0.3

Temperature Operating °C -40 to +105 -20 to +105 -40 to +105 -40 to +105

Product Characteristics

Operate Time 6ms - max. 1.0 1.0 3.0 3.0

Release Time 6ms - max. 1.0 1.0 3.0 3.0

Shock 711ms ½ sine G - max. 100 100 50 50

Vibration 750-2000 Hz G - max. 30 30 30 30

Notes:

1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information.

2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details.

3. Breakdown Voltage - per MIL-STD-202, Method 301.

4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load.

5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens.

6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II).

7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202.

8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse.

Sensitivity Options (Using 57145 Actuator)

Select Option S T U V

Switch Type

Pull-In

AT Range

Activate Distance – D

mm (inch)

Average

Pull-In

AT Range

Activate Distance – D

mm (inch)

Average

Pull-In

AT Range

Activate Distance – D

mm (inch)

Average

Pull-In

AT Range

Activate Distance – D

mm (inch)

Average

1Normally Open 12-18 13.5 (.531) 17-23 11.2 (.441) 22-28 9.8 (.385) 27-33 9.0 (.357)

2High Voltage -- -- 17-23 11.2 (.441) 22-28 9.8 (.385) 27-33 9.0 (.357)

3Change Over 15-20 11.0 (.433) 20-25 9.2 (.362) 25-30 8.5 (.335) -- --

4Normally

Closed 15-20 11.0 (.433) 20-25 9.2 (.362) 25-30 8.5 (.335) -- --

Note:

1. Pull-In AT Range: These AT values are the bare reed switch AT before modification.

2. The activation distance is average value on the final sensor assembly.

Speciﬁcations are subject to change without notice.

Reed Sensors

Flange Mounting Sensor > 59145

Packaging

Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width

Bulk Bulk 500 N/A N/A

Part Numbering System

59145 - X - X - XX - X

Series

Switch Type

1, 2, 3, or 4

Sensitivity

S, T, U, or V

Termination

A or F, or E

Cable Length

59145 Flange Mount Sensor + 57145 Actuator

57145 - 000

Series

Standard Actuator

000

Sensor:

Actuator:

Cable Length Specification

Cable Type: 24 AWG 7/32 PVC 105°C UL1430/UL1569

Select Option Cable Length

mm (inch)

02 300 (11.81)

Termination Specification

Termination Options

Select

Option Description

(Two-wire versions illustrated)

ATinned leads (6.4±0.76)mm

FUntinned leads (6.4±0.76)mm

EJST type XHP 2.5mm pitch

Note: The 57145 Actuator is sold separately.

Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and

test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.

Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.