Reed Sensors Flange Mounting Sensor > 59145 59145 Flange Mount Sensor + 57145 Actuator Description The 59145 is a flange mounting reed sensor 28.57mm x 19.05mm x 6.35mm (1.125" x 0.750" x 0.250") with a choice of normally open, normally open high voltage, normally closed or changeover contacts. It's case design enables screw or adhesive mounting and the wires exit from top right hand side. It is also available with left hand exit - see 59150 Series. It is capable of switching up to 265Vac/300Vdc at 10VA. The 59145 functions best with the matching actuator 57145-000. Actuator Note: The 57145 Actuator is sold separately. Sensors Features * Two-part magnetically operated proximity sensor Agency Approvals Agency Benefits Agency File Number * Hermetically sealed, magnetically operated contacts continue to operate long after optical and other technologies fail due to contamination E61760 Note: Contact Littelfuse for specific agency approval ratings. Dimensions * Position and limit sensing * Security system switch 28.57 (1.125) 19.05 (.75) 15.88 (.625) 3.43 (.135) 3.18x7.82 (.125x.308 LG.) SLOT 2 Note: 59145 shown. 59150 leads exit opposite. Sensor 6.35 (.250) 300 (11.81) 6.35 (.250) NOM. 9.53 (.375) 14.28 (.562) 3.18x7.82 (.125x.308 LG.) SLOT 2 * Linear actuators * Door switch 9.53 (.375) 14.28 (.562) 28.57 (1.125) * No standby power requirement * Operates through non-ferrous materials such as wood, plastic or aluminium * Simple installation and adjustment Applications Dimensions in mm (inch) Actuator * Customer defined sensitivity option * Choice of cable and connector 19.05 (.75) 15.88 (.625) 6.35 (.250) 3.43 (.135) 6.35 (.250) Schematics Switch Type Black Black Black Blue White Black Black (c) 2019 Littelfuse Revised: 02/08/19 Specifications are subject to change without notice. 1 and 2 3 4 littelfuse.com Reed Sensors Flange Mounting Sensor > 59145 59145 Flange Mount Sensor + 57145 Actuator Electrical Ratings Normally Open Contact Type Switch Type Normally Open High Voltage Change Over Normally Closed 1 2 3 4 VA/Watt - max. 10 10 5 5 Vdc - max. Vac - max. Vdc - min. 200 140 250 300 265 400 175 120 200 175 120 200 Carry Adc - max. Aac - max. Adc - max. 0.5 0.35 1.2 0.4 0.30 1.4 0.25 0.18 1.5 0.25 0.18 1.5 Contact, Initial Insulation - max. - min. 0.2 1010 0.2 1010 0.2 109 0.2 109 Capacitance Contact pF - typ. 0.3 0.2 0.3 0.3 Temperature Operating C -40 to +105 -20 to +105 -40 to +105 -40 to +105 ms - max. 1.0 1.0 3.0 3.0 Contact Rating Voltage 4 Current 4 1 Switching 2 Breakdown Switching Resistance 5 3 2 Product Characteristics Operate Time 6 Release Time 6 Shock 7 Vibration 7 ms - max. 1.0 1.0 3.0 3.0 11ms 12 sine G - max. 100 100 50 50 50-2000 Hz G - max. 30 30 30 30 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Breakdown Voltage - per MIL-STD-202, Method 301. 4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens. 6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II). 7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. 8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse. Sensitivity Options (Using 57145 Actuator) Select Option Switch Type 1 Normally Open S T U V Distance - D Pull-In Activate Distance - D Pull-In Activate Distance - D Activate Distance - D Pull-In Activate Pull-In mm (inch) mm (inch) mm (inch) mm (inch) AT Range AT Range AT Range AT Range Average Average Average Average 12-18 13.5 (.531) 17-23 11.2 (.441) 22-28 9.8 (.385) 27-33 9.0 (.357) 2 High Voltage -- -- 17-23 11.2 (.441) 22-28 9.8 (.385) 27-33 9.0 (.357) 3 Change Over 15-20 11.0 (.433) 20-25 9.2 (.362) 25-30 8.5 (.335) -- -- 4 Normally Closed 15-20 11.0 (.433) 20-25 9.2 (.362) 25-30 8.5 (.335) -- -- Note: 1. Pull-In AT Range: These AT values are the bare reed switch AT before modification. Sensor Actuator 2. The activation distance is average value on the final sensor assembly. D (c) 2019 Littelfuse Revised: 02/08/19 Specifications are subject to change without notice. littelfuse.com Reed Sensors Flange Mounting Sensor > 59145 59145 Flange Mount Sensor + 57145 Actuator Part Numbering System Cable Length Specification Select Option Cable Length mm (inch) 02 300 (11.81) 59145 - X - X - XX - X Sensor: Cable Type: 24 AWG 7/32 PVC 105C UL1430/UL1569 Series Termination Specification Switch Type 1, 2, 3, or 4 Termination Options Select Option Sensitivity S, T, U, or V Description (Two-wire versions illustrated) A Tinned leads (6.40.76)mm F Untinned leads (6.40.76)mm E JST type XHP 2.5mm pitch Cable Length 02 Termination A or F, or E Actuator: 57145 - 000 Series Standard Actuator 000 Note: The 57145 Actuator is sold separately. Packaging Packaging Option Bulk Packaging Specification Bulk Quantity 500 Quantity & Packaging Code N/A Taping Width N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. (c) 2019 Littelfuse Revised: 02/08/19 Specifications are subject to change without notice. littelfuse.com