Regulated, Programmable 15 Watt HV Modules 0 to + or - 300 through 0 to + or - 10,000 VDC @ 15 Watts H Series The H Series is a line of compact, regulated power supplies featuring 15 watts of continuous output power. This line features 0 to 100% programmability via a 0 to 5 volt OUTPUT VOLTAGE OUTPUT CURRENT RIPPLE REGULATION (LOAD) CASE SIZE H03P 0 to +300 50 mA <1.0% <0.75% A H03N 0 to -300 50 mA <1.0% <0.75% A H05P 0 to +500 30 mA <0.5% <0.20% A H05N 0 to -500 30 mA <0.5% <0.20% A H10P 0 to +1,000 15 mA <0.01% <0.20% A H10N 0 to -1,000 15 mA <0.01% <0.20% A H15P 0 to +1,500 10 mA <0.025% <0.20% A H15N 0 to -1,500 10 mA <0.01% <0.20% A H20P 0 to +2,000 7.5 mA <0.03% <0.20% A H20N 0 to -2,000 7.5 mA <0.03% <0.20% A H30P 0 to +3,000 5 mA <0.75% <0.20% A H30N 0 to -3,000 5 mA <1.0% <0.20% A H40P 0 to +4,000 3.75 mA <0.5% <0.20% A H40N 0 to -4,000 3.75 mA <0.5% <0.20% A H50P 0 to +5,000 3 mA <0.75% <0.20% A H50N 0 to -5,000 3 mA <0.75% <0.20% A H60P 0 to +6,000 2.5 mA <0.75% <0.50% A H60N 0 to -6,000 2.5 mA <0.75% <0.20% A H101P 0 to +10,000 1.5 mA <1.0% <0.20% B MODEL FEATURES 0 to 100% Programmability Output Voltage Monitor Short Circuit Protection Reverse Polarity Protection Arc Protection Low EMI / RFI Shielded Metal Case Input/Output Filtering OPTIONS Mounting Holes ( Add `H' to end of model e.g. H10NH ) APPLICATIONS Piezo devices HV op amp rails Ultrasonic transducers Lamp ignition & drive Electrophoresis Capacitor Charging General Lab Use PHYSICAL CHARACTERISTICS CASE A: 3.0 (76.2) X 3.0 (76.2) X 0.90 (22.9) WEIGHT: 10 Ounces (283.5 grams) PINS: .04 (1.02) Dia., .30 (7.62) min length CASE B: 3.25 (82.6) x 4.0 (101.6) x 1.10 (27.9) WEIGHT: 18 Ounces (510.3 grams) PINS: .04 (1.02) Dia., .20 (5.08) min length PACKAGING: Fully Encapsulated CASE MATERIAL: Black Anodized Aluminum programming voltage. A 0 to 5 volt output voltage monitor is provided. Short circuit, arc, and reverse polarity protection are standard. Technical assistance is readily available. ELECTRICAL SPECIFICATIONS INPUT VOLTAGE: 24 Volts (-5%, +15%) OUTPUT VOLTAGE: See Table OUTPUT CURRENT: See Table PROGRAMMING VOLTAGE: 0 to +5 Volts REGULATION: Line: < 0.2% Load: See Table INPUT CURRENT: No Load: <0.5 Amps Full Load: <1.5 Amps TEMPERATURE COEFFICIENT: < 200ppm/C RIPPLE: See Table OPERATING TEMP: -10 to +50 C STORAGE TEMP: -20 to +90 C e-mail sales@emcohighvoltage.com Web site www.emcohighvoltage.com SEE SHEET 2 FOR MECHANICAL DETAILS Dimensions are in inches Dimensional Tolerances: .03 (.76mm) (Metric equivalents in parenthesis) Phone (209) 223-3626 Fax (209) 223-2779 11126 Ridge Road, Sutter Creek CA 95685 We reserve the right to make changes without notification 4729N Regulated, Programmable 15 Watt HV Modules 0 to + or - 300 through 0 to + or - 10,000 VDC @ 15 Watts H Series CASE A Pin # (76.2) (6.35) www.emcohighvoltage.com EMCO High Voltage Corporation MFG CODE +24V Input 2 Ground 3 Programming Volts: 0 to +5V 4 High Voltage Output Voltage Monitor: Positive Outputs: 0 to +5V = 0 to 100% V out Negative Outputs: 0 to - 5V = 0 to 100% V out 5 MODEL (76.2) Function 1 (63.5) DANGER HIGH VOLTAGE (6.35) Dimensions are in Inches Dimensional Tolerances: +0.03 (.76mm) (Metric equivalents in parenthesis) (63.5) (22.9) .04 (1.02) PIN DIA NOTE: RUN SEPARATE GROUND PATHS FOR POWER AND SIGNAL GROUNDS. (47.0) (27.9) (10.2) (10.2) (48.3) BOTTOM VIEW CASE B 4.00 (101.6) .25 (6.35) www.emcohighvoltage.com EMCO High Voltage Corporation 3.25 (82.6) .25 (6.35) 2.75 (69.9) MODEL MFG CODE OUTPUT LEAD #22AWG, 30KV, SILICONE, WHITE 12" MIN LONG Ground 3 Programming Volts: 0 to +5V 4 Programming Return Voltage Monitor: 0 to 5V = 0 to 100% V out Output Return Dimensions are in Inches Dimensional Tolerances: +0.03 (.76mm) (Metric equivalents in parenthesis) .20 (5.08) MIN PC PIN .04 (1.02) DIA 6 PLACES NOTE: RUN SEPARATE GROUND PATHS FOR POWER AND SIGNAL GROUNDS. .156 (3.96)DIA THRU 2 HOLES .60 (15.2) .40 (10.2) .40 (10.2) Function +24V DC 2 5 6 3.50 (88.9) 1.10 (27.9) 1.10 (27.9) Pin # 1 1.90 (48.3) 2.75 (69.9) BOTTOM VIEW e-mail sales@emcohighvoltage.com Web site www.emcohighvoltage.com Phone (209) 223-3626 Fax (209) 223-2779 11126 Ridge Road, Sutter Creek CA 95685 We reserve the right to make changes without notification