SEE SHEET 2 FOR
MECHANICAL DETAILS
Regulated, Programmable 15 Watt HV Modules
0 to + or - 300 through 0 to + or - 10,000 VDC @ 15 Watts
H Series
OPTIONS
Mounting Holes
( Add ‘H’ to end of model
e.g. H10NH )
APPLICATIONS
Piezo devices
HV op amp rails
Ultrasonic transducers
Lamp ignition & drive
Electrophoresis
Capacitor Charging
General Lab Use
PHYSICAL CHARACTERISTICS
CASE A: 3.0 (76.2) X 3.0 (76.2) X 0.90 (22.9)
WEIGHT: 10 Ounces (283.5 grams)
PINS: .04 (1.02) Dia., .30 (7.62) min length
CASE B: 3.25 (82.6) x 4.0 (101.6) x 1.10 (27.9)
WEIGHT: 18 Ounces (510.3 grams)
PINS: .04 (1.02) Dia., .20 (5.08) min length
PACKAGING: Fully Encapsulated
CASE MATERIAL: Black Anodized Aluminum
ELECTRICAL SPECIFICATIONS
INPUT VOLTAGE: 24 Volts (-5%, +15%)
OUTPUT VOLTAGE: See Table
OUTPUT CURRENT: See Table
PROGRAMMING VOLTAGE: 0 to +5 Volts
REGULATION: Line: < 0.2%
Load: See Table
INPUT CURRENT: No Load: <0.5 Amps
Full Load: <1.5 Amps
TEMPERATURE COEFFICIENT: < 200ppm/°C
RIPPLE: See Table
OPERATING TEMP: -10° to +50° C
STORAGE TEMP: -20° to +90° C
FEATURES
0 to 100% Programmability
Output Voltage Monitor
Short Circuit Protection
Reverse Polarity Protection
Arc Protection
Low EMI / RFI
Shielded Metal Case
Input/Output Filtering
The H Series is a line of compact,
regulated power supplies featuring
15 watts of continuous output power.
This line features 0 to 100%
programmability via a 0 to 5 volt
programming voltage. A 0 to 5 volt
output voltage monitor is provided.
Short circuit, arc, and reverse polarity
protection are standard. Technical
assistance is readily available.
MODEL OUTPUT
VOLTAGE
OUTPUT
CURRENT
RIPPLE
REGULATION
(LOAD)
H03P 0 to +300 50 mA <1.0% <0.75%
H03N 0 to –300 50 mA <1.0% <0.75%
H05P 0 to +500 30 mA <0.5% <0.20%
H05N 0 to –500 30 mA <0.5% <0.20%
H10P 0 to +1,000 15 mA <0.01% <0.20%
H10N 0 to –1,000 15 mA <0.01% <0.20%
H15P 0 to +1,500 10 mA <0.025% <0.20%
H15N 0 to –1,500 10 mA <0.01% <0.20%
H20P 0 to +2,000 7.5 mA <0.03% <0.20%
H20N 0 to –2,000 7.5 mA <0.03% <0.20%
H30P 0 to +3,000 5 mA <0.75% <0.20%
H30N 0 to –3,000 5 mA <1.0% <0.20%
H40P 0 to +4,000 3.75 mA <0.5% <0.20%
H40N 0 to –4,000 3.75 mA <0.5% <0.20%
H50P 0 to +5,000 3 mA <0.75% <0.20%
H50N 0 to –5,000 3 mA <0.75% <0.20%
H60P 0 to +6,000 2.5 mA <0.75% <0.50%
H60N 0 to –6,000 2.5 mA <0.75% <0.20%
H101P 0 to +10,000 1.5 mA <1.0% <0.20%
CASE
SIZE
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
4729N
We reserve the right to make changes without notification
e-mail sales@emcohighvoltage.com
Web site www.emcohighvoltage.com
Phone (209) 223-3626 Fax (209) 223-2779
11126 Ridge Road, Sutter Creek CA 95685
Dimensions are in inches
Dimensional Tolerances: ± .03 (.76mm)
(Metric equivalents in parenthesis)
EMCO
MODEL
CODE
High Voltage Corporation
MFG
www.emcohighvoltage.com
4.00
(101.6)
3.25
(82.6)
2.75
(69.9)
.25
(6.35)
3.50
(88.9)
.25
(6.35)
1.10
(27.9)
PC PIN
.04 (1.02) DIA
6 PLACES
.20 (5.08) MIN
OUTPUT LEAD
#22AWG, 30KV,
SILICONE, WHITE
12" MIN LONG
1.10 (27.9).60 (15.2)
.40 (10.2)
.40
(10.2)
1.90 (48.3)
2.75 (69.9)
.156 (3.96)DIA THRU
2 HOLES
BOTTOM VIEW
We reserve the right to make changes without notification
e-mail sales@emcohighvoltage.com
Web site www.emcohighvoltage.com
Phone (209) 223-3626 Fax (209) 223-2779
11126 Ridge Road, Sutter Creek CA 95685
Regulated, Programmable 15 Watt HV Modules
0 to + or - 300 through 0 to + or - 10,000 VDC @ 15 Watts
H Series
www.emcohighvoltage.com
High Voltage Corporation
EMCO
MODEL
MFG
CODE
HIGH VOLTAGE
DANGER
(76.2)
(6.35)
(76.2) (63.5)
(63.5)
(22.9)
.04 (1.02) PIN DIA
(47.0)
(27.9)
(10.2)
(10.2)
(48.3)
BOTTOM VIEW
(6.35)
Pin # Function
1 +24V Input
2 Ground
3 Programming Volts: 0 to +5V
4 High Voltage Output
5 Voltage Monitor:
Positive Outputs: 0 to +5V = 0 to 100% V out
Negative Outputs: 0 to – 5V = 0 to 100% V out
Dimensions are in Inches
Dimensional Tolerances: +0.03 (.76mm)
(Metric equivalents in parenthesis)
NOTE:
RUN SEPARATE GROUND PATHS FOR
POWER AND SIGNAL GROUNDS.
CASE A
CASE B
Pin # Function
1 +24V DC
2 Ground
3 Programming Volts: 0 to +5V
4 Programming Return
5 Voltage Monitor:
0 to 5V = 0 to 100% V out
Dimensions are in Inches
Dimensional Tolerances: +0.03 (.76mm)
(Metric equivalents in parenthesis)
6 Output Return
NOTE:
RUN SEPARATE GROUND PATHS FOR
POWER AND SIGNAL GROUNDS.
