SINGLE-IN-LINE SOCKETS .100" Grid Solder Tail Single Row Series 310, 311, 315 * SIP sockets accept .015 - .025" diameter pins and standard IC leads. * Various solder tails available: standard length, long for multi-layer boards, very low and ultra low profile. See Mill-Max #1001, 0134, 0501 or 1534 pins (See pages 132, 133, 136) for details. * Hi-Rel, 4-finger BeCu #12 & #30 contacts are rated at 3 amps. See pages 218 for details. RoHS * Insulators are high temp. thermoplastic. 2002/95/EC Ordering Information Fig. 1 Series 310...001 Standard Solder Tail 310-XX-1_ _-41-001000 Fig. 1 Specify # of pins 01-64 Series 311...001 41 & 91 Platings Non-Standard Fig. 2 Long Solder Tail 311-XX-1_ _-41-001000 Specify # of pins 01-64 Series 315...001 Fig. 2 41 & 91 Platings Non-Standard Fig. 3 Very Low Profile 315-XX-1_ _-41-001000 Specify # of pins Series 315...003 41 & 91 Platings Non-Standard Fig. 4 01-64 Ultra Low Profile 315-XX-1_ _-41-003000 Specify # of pins 01-64 Fig. 3 For Electrical, Mechanical & Enviromental Data, See pg. 4 SPECIFY PLATING CODE XX= Fig. 4 w w w. m i l l - m a x . c o m 13 Sleeve (Pin) 10" Au Contact (Clip) 30" Au 89 For RoHS compliance select plating code. XX=Plating Code See Below 91 93 99 41 200" Sn/Pb 200" Sn/Pb 200"Sn/Pb 200"Sn 10" Au 30" Au 200"Sn/Pb 10" Au 43 44 200"Sn 200"Sn 30" Au 200"Sn 516-922-6000