SINGLE-IN-LINE SOCKETS
.100” Grid Solder Tail
Single Row
www.mill-max.com 516-922-6000
89
Series 310, 311, 315
Ordering Information
Series 310...001 Standard Solder Tail
310-XX-1_ _-41-001000
Series 311...001 Long Solder Tail
311-XX-1_ _-41-001000
Series 315...001 Very Low Profile
315-XX-1_ _-41-001000
Series 315...003 Ultra Low Profile
315-XX-1_ _-41-003000
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Specify # of pins 01-64
Specify # of pins 01-64
Specify # of pins 01-64
Specify # of pins 01-64
• SIP sockets accept .015 - .025”
diameter pins and standard IC leads.
• Various solder tails available:
standard length, long for multi-layer
boards, very low and ultra low profile.
See Mill-Max #1001, 0134, 0501 or
1534 pins (See pages 132, 133, 136)
for details.
• Hi-Rel, 4-finger BeCu #12 & #30 contacts
are rated at 3 amps. See pages 218 for
details.
• Insulators are high temp. thermoplastic.
Fig. 4
Fig. 3
Fig. 2
Fig. 1
SPECIFY PLATING CODE XX= 13
91 93 99 41
43
44
Sleeve (Pin)
Contact (Clip)
10µ” Au 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn
30µ” Au 10µ” Au 30µ” Au 200µ”Sn/Pb 10µ” Au 30µ” Au 200µ”Sn
RoHS
2002/95/EC
XX=Plating Code
See Below
For Electrical,
Mechanical & Enviromental
Data, See pg. 4
For RoHS compliance
select
plating code.
41 & 91 Platings
Non-Standard
41 & 91 Platings
Non-Standard
41 & 91 Platings
Non-Standard
