BC857S BC857S E2 B2 C1 C2 SC70-6 Mark: 3C B1 pin #1 E1 NOTE: The pinouts are symmetrical; pin 1 and pin 4 are interchangeable. Units inside the carrier can be of either orientation and will not affect the functionality of the device. PNP Multi-Chip General Purpose Amplifier This device is designed for general purpose amplifier applications at collector currents to 200 mA. Sourced from Process 68. Absolute Maximum Ratings* Symbol TA = 25C unless otherwise noted Parameter Value Units VCEO Collector-Emitter Voltage 45 V VCES Collector-Base Voltage 50 V VCBO Collector-Base Voltage 50 V VEBO Emitter-Base Voltage 5.0 V IC Collector Current - Continuous 200 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 3) All voltages (V) and currents (A) are negative polarity for PNP transistors. Thermal Characteristics Symbol PD RJA TA = 25C unless otherwise noted Characteristic Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient 1998 Fairchild Semiconductor Corporation Max Units BC857S 300 2.4 415 mW mW/C C/W 4 (continued) Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Test Conditions Min Typ Max Units OFF CHARACTERISTICS V(BR)CEO Collector-Emitter Breakdown Voltage IC = 10 mA, IB = 0 45 V V(BR)CES Collector-Base Breakdown Voltage IC = 10 A, IE = 0 50 V V(BR)CBO Collector-Base Breakdown Voltage IC = 10 A, IE = 0 50 V V(BR)EBO Emitter-Base Breakdown Voltage IE = 10 A, IC = 0 5.0 ICBO Collector-Cutoff Current VCB = 30 V VCB = 30 V, TA = 150C V 15 4.0 nA A ON CHARACTERISTICS hFE DC Current Gain IC = 2.0 mA, VCE = 5.0 V VCE(sat) Collector-Emitter Saturation Voltage VBE(on) Base-Emitter On Voltage IC = 10 mA, IB = 0.5 mA IC = 100 mA, IB = 5.0 mA IC = 2.0 mA, VCE = 5.0 V IC = 10 mA, VCE = 5.0 V 125 630 0.3 0.65 0.75 0.82 0.6 V V V V SMALL SIGNAL CHARACTERISTICS fT Current Gain - Bandwidth Product Cobo NF Output Capacitance Noise Figure IC = 10 mA, VCE = 5.0, f = 100 mHz VCB = 10 V, f = 1.0 MHz 200 MHz 3.5 pF IC = 0.2 mA, VCE = 5.0, RS = 2.0 k, f = 1.0 kHz, BW = 200 Hz 2.5 dB NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors. Typical Pulsed Current Gain vs Collector Current 500 V CE = 5V 400 125 C 300 25 C 200 100 0 0.01 - 40 C 0.1 1 10 100 I C - COLLECTOR CURRENT (mA) VCESAT - COLLECTOR EMITTE R VOLTAGE (V) h FE - TYPICAL PULSED CURRENT GAIN Typical Characteristics Collector-Emitter Saturation Voltage vs Collector Current 0.3 0.25 = 10 0.2 0.15 25 C 0.1 0.05 0 0.1 125 C - 40 C 1 10 100 I C - COLLECTOR CURRE NT (mA) 300 BC857S PNP Multi-Chip General Purpose Amplifier (continued) (continued) Base-Emitter Saturation Voltage vs Collector Current 1.2 = 10 1 - 40 C 0.8 25 C 0.6 125 C 0.4 0.2 0 0.1 1 10 100 I C - COLLECTOR CURRE NT (mA) 300 V BEON - BAS E EMITTER ON VOLTAGE (V) V BESAT - BASE EM ITTE R VOLTAGE (V) Typical Characteristics Base Emitter ON Voltage vs Collector Current 1 0.8 - 40C 25 C 125 C 0.6 0.4 V CE = 5V 0.2 0 0.1 1 10 I C - COLLECTOR CURRE NT (mA) Collector-Emitter Breakdown Voltage with Resistance Between Emitter-Base 10 1 0.1 0.01 25 50 75 100 T A - AMBIE NT TEMP ERATURE ( C) 125 BVCER - BREAKDOWN VOLTAGE (V) V CB = 50V 95 90 85 80 75 70 0.1 1 10 100 Input and Output Capacitance vs Reverse Voltage 4 100 Ta = 25C 3 2 1000 RESISTANCE (k ) Collector Saturation Region Ic = 100 uA 300 mA 50 mA 1 f = 1.0 MHz CAPACITANCE (pF) V CE - COLLECTOR-EMITTER VOLTAGE (V) I CBO - COLLE CTOR CURRENT (nA) Collector-Cutoff Current vs Ambient Temperature 100 100 200 10 Cib Cob 0 100 300 700 I B - BASE CURRENT (uA) 2000 4000 0.1 1 10 V CE - COLLECTOR VOLTAGE (V) 100 BC857S PNP Multi-Chip General Purpose Amplifier (continued) f T - GAIN BANDWIDTH PRODUCT (MHz) Typical Characteristics (continued) Switching Times vs Collector Current Gain Bandwidth Product vs Collector Current 300 40 Vce = 5V 270 ts 240 30 TIME (nS) 210 20 180 IB1 = IB2 = Ic / 10 V cc = 10 V 150 120 90 10 tf 60 30 0 10 20 50 100 150 td I C - COLLECTOR CURRENT (mA) 20 30 50 100 200 I C - COLLECTOR CURRENT (mA) Power Dissipation vs Ambient Temperat ure PD - POWE R DIS SIPATION (W) 1 0 10 500 400 SC70 -6 300 200 100 0 0 25 50 75 100 TE MPE RATURE (C) tr 125 150 300 BC857S PNP Multi-Chip General Purpose Amplifier SC70-6 Tape and Reel Data SC70-6 Packaging Configuration: Figure 1.0 Packaging Description: Customized Label SC70-6 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. Antistatic Cover Tape These full reels are individually barcode labeled and placed inside a pizza box (illustrated in figure 1.0) made of recyclable corrugated brown paper with a Fairchild logo printing. One pizza box contains three reels maximum. And these pizza boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. F63TNR Static Dissipative Label Embossed Carrier Tape 21 21 21 21 21 SC70-6 Packaging Information Packaging Option Packaging type Standard (no flow code) TNR Pin 1 D87Z SC70-6 Unit Orientation TNR Qty per Reel/Tube/Bag 3,000 Reel Size 7" Dia 13" 184x187x47 343x343x64 Max qty per Box 9,000 30,000 Weight per unit (gm) 0.0055 0.0055 Weight per Reel (kg) 0.1140 0.3960 Box Dimension (mm) 10,000 343mm x 342mm x 64mm Intermediate box for D87Z Option F63TNR Barcode Label Note/Comments F63TNR Label F63TNR Label sample 184mm x 187mm x 47mm Pizza Box for Standard Option F63TNR Label LOT: CBVK741B019 QTY: 3000 FSID: FDG6302P SPEC: D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: N/F: F (F63TNR)3 SC70-6 Tape Leader and Trailer Configuration: Figure 2.0 Carrier Tape Cover Tape Components Trailer Tape 300mm minimum or 75 empty pockets (c)2000 Fairchild Semiconductor International Leader Tape 500mm minimum or 125 empty pockets August 1999, Rev. C SC70-6 Tape and Reel Data, continued SC70-6 Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 Wc W E2 B0 Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 SC70-6 (8mm) 2.24 +/-0.10 2.34 +/-0.10 W 8.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.125 +/-0.125 1.75 +/-0.10 F 6.25 min 3.50 +/-0.05 P1 P0 4.0 +/-0.1 4.0 +/-0.1 K0 T 1.20 +/-0.10 0.255 +/-0.150 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). Wc 5.2 +/-0.3 0.06 +/-0.02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 Tc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) SC70-6 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max See detail AA Dim N 7" Diameter Option B Min Dim C See detail AA W3 13" Diameter Option Dim D min W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size Reel Option Dim A Dim B 8mm 7" Dia 7.00 177.8 0.059 1.5 0.512 +0.020/-0.008 13 +0.5/-0.2 Dim C 0.795 20.2 Dim D 2.165 55 Dim N 0.331 +0.059/-0.000 8.4 +1.5/0 Dim W1 Dim W2 0.567 14.4 0.311 - 0.429 7.9 - 10.9 Dim W3 (LSL-USL) 8mm 13" Dia 13.00 330 0.059 1.5 0.512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 4.00 100 0.331 +0.059/-0.000 8.4 +1.5/0 0.567 14.4 0.311 - 0.429 7.9 - 10.9 July 1999, Rev. C SC70-6 Package Dimensions SC70-6 (FS PKG Code 76) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0055 (c)2000 Fairchild Semiconductor International March 2000, Rev. B TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G