L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only 6N138, 6N139 Single Channel, High Speed Optocouplers Dec.2008 Description These high gain series couplers use a light emitter diode and an integrated high gain photo detector to provide extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltage and high speed operation. Where desired the Vcc and Vo terminals may be tied together to achieve conventional photo darlington operation. A base access terminal allows a gain bandwidth adjustment to be made. Functional Diagram NC VCC ANODE VB Cathode VO NC GND 6N138 / 6N139 Truth Table (Positive Logic) LED OUT ON L OFF H A 0.1F bypass Capacitor must be connected between Pin8 and Pin5 Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Features * High current transfer ratio - 2000% typical. * Low input current requirements - 0.5mA * High output current - 60mA * CTR guarantee - 0~70. * Instantaneous common mode rejection 10KV/sec * TTL compatible output - 0.1V VOL typical * UL, CSA approved. APPLICATIONS * * * * * * Digital logic ground isolation Low input current line receiver Telephone ring detector EIA-RS-232C line receiver Current loop receiver High common mode noise line receiver Page : 1 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only Ordering Information Minimum CMR Part Option dV/dt (V/s) VCM (V) CTR Remarks Single Channel, DIP-8 6N138 400 M S 1,000 Single Channel, Wide Lead Spacing Single Channel, SMD-8 10 Single Channel, DIP-8 6N139 M S Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 300 Single Channel, Wide Lead Spacing Single Channel, SMD-8 Page : 2 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only OUTLINE DIMENSIONS 8-pin DIP Package (6N138 / 6N139) *1. Year date code. *2. 2-digit work week. *3. Factory identification mark (Z : Taiwan, Y : Thailand). Dimensions are in Millimeters and (Inches). Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 3 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only OUTLINE DIMENSIONS 8-pin DIP Wide Lead Spacing Package (6N138M / 6N139M) *1. Year date code. *2. 2-digit work week. *3. Factory identification mark (Z : Taiwan, Y : Thailand). Dimensions are in Millimeters and (Inches). Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 4 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only OUTLINE DIMENSIONS 8-pin DIP Surface Mount Package (6N138S / 6N139S) *1. Year date code. *2. 2-digit work week. *3. Factory identification mark (Z : Taiwan, Y : Thailand). Dimensions are in Millimeters and (Inches). Part No. : 6N138 / 6N139 series Page : 5 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only TAPING DIMENSIONS 6N138S/6N139S-TA 6N138S/6N139S-TA1 Description Symbol Dimensions in millimeters ( inches ) Tape wide W 16 0.3 ( .63 ) Pitch of sprocket holes P0 4 0.1 ( .15 ) Distance of compartment F P2 7.5 0.1 ( .295 ) 2 0.1 ( .079 ) Distance of compartment to compartment P1 12 0.1 ( .472 ) Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 6 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only Recommended Lead Free Reflow Profile Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 7 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only Absolute Maximum Ratings*1 Parameter Symbol Device Min TYP Max Units Storage Temperature TST -55 125 o Operating Temperature TA -20 85 o 6N138 6N139 5000 C C Isolation Voltage VISO VRMS Supply Voltage VCC 15 V Lead Solder Temperature * 2 TSOL 260 C Average Forward Input Current IF 20 mA Reverse Input Voltage VR 5 V Input Power Dissipation PI 35 mW 50 mA Input 6N138 6N139 Output Average Output Current IO 6N138 6N139 6N138 Supply Voltage, Output Voltage 7 V 6N139 Output Collector Power Dissipation -0.5 Vcc, VO PO 6N138 6N139 -0.5 18 100 mW 1.Ambient temperature = 25oC, unless otherwise specified. Stresses exceeding the absolute maximum ratings can cause permanent damage to the device. Exposure to absolute maximum ratings for long periods of time can adversely affect reliability. 2. 260oC for 10 seconds. Refer to Lead Free Reflow Profile. Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 8 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only Electrical Specifications Parameters Test Condition Symbol Device Min Typ Max Units 1.1 1.7 V Input Input Forward Voltage IF =1.6mA, TA=25 Input Forward Voltage Temperature Coefficient IF=1.6mA Input Reverse Voltage IR = 10A TA=25 BVR 5 - - V Input Capacitance VF=0; f=1MHZ CIN - 60 - pF 300 1600 2600 400 2000 5000 500 1600 2600 - 0.1 0.4 - 0.1 VF VF/Ta mV/ -1.9 6N138 6N139 Detector IF=1.6mA;Vo=0.4V; Vcc=4.5V Current transfer ratio IF=0.5mA;Vo=0.4V; Vcc=4.5V 6N138 CTR IF=1.6mA;Vcc=0.4V; Vcc=4.5V Logic low output voltage IF=1.6mA;Vcc=4.5V; Io=4.8mA IF=0.5mA;Vcc=4.5V; Io=2mA IF=1.6mA;Vcc=4.5V; Io=8mA IF=5mA;Vcc=4.5V; Io=15mA IF=12mA;Vcc=4.5V; Io=24mA 6N138 VOL V 6N139 IF=0mA, Vo=Vcc=7V TA=25 Logic high output current % 6N139 6N138 0.4 - 0.2 - 0.05 250 A IOH IF=0mA, Vo=Vcc=18V TA=25 6N139 - 0.1 100 Logic low supply current IF=1.6mA, Vo=open (Vcc=18V) IccL 6N138 6N139 - 0.4 1.5 mA Logic high supply current IF=0mA, Vo=open ; TA=25 (Vcc=18V) IccH 6N138 6N139 - 0.01 10 uA *All Typical at TA =25C Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 9 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only SWITCHING SPECIFICATIONS (AC) TA=0~70, Vcc=5V, unless otherwise specified. Parameter Test Condition Symbol IF=1.6mA; RL= 2.2k Propagation Delay Time to Low Output Level IF=0.5mA; RL=4.7K Device Min Typ Max 6N138 - 1.6 10 - 5 25 - 0.1 1 - 10 35 - 18 60 - 2 7 tPHL s 6N139 IF=12mA; RL=270 IF=1.6mA; RL= 2.2k Propagation Delay Time to High Output Level Units IF=0.5mA; RL=4.7K 6N138 tPLH s 6N139 IF=12mA; RL=270 KV/s Logic High Common Mode Transient Immunity IF=0mA; |VCM|=10Vp-p RL=2.2K |CMH| 6N138 6N139 1 10 KV/s Logic Low Common Mode Transient Immunity IF=1.6mA; |VCM|=10Vp-p RL=2.2K KV/s |CML| 6N138 6N139 1 10 KV/s *All Typical at TA =25C Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 10 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only Isolation Characteristics Parameter Test Condition Symbol Input-Output Insulation Leakage Current 45% RH, t = 5s, o VI-O = 3kV DC, TA = 25 C II-O Withstand Insulation Test Voltage RH 50%, t = 1min, o TA = 25 C VISO Input-Output Resistance VI-O = 500V DC RI-O Min Typ Max Units 1.0 A 5000 VRMS 12 10 *All Typical at TA =25C Notes, 1. AC For 1 Minute, R.H. = 40 ~ 60%. Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. 2. For 10 Seconds 3. Current Transfer Ratio (CTR) is defined as the ration of output collector current, Io, to the forward LED input current, IF, times 100%. 4. Pin 7 open. 5. Instantaneous common mode rejection voltage "output (1)" represents a common mode voltage variation that can hold the output above (1) level (Vo>2.0V).Instantaneous common mode rejection voltage "output (0)" represents a common mode voltage variation that can hold the output above (0) level (Vo<0.8V). 6. Device considered a two terminal device. Pins 1, 2, 3 and 4 shorted together and Pins 5, 6, 7 and 8 shorted together. Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 11 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only Switching Time Test Circuit Figure 1: Single Channel Test Circuit for tPHL and tPLH Figure 2: Single Channel Test Circuit for Common Mode Transient Immunity Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 12 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only Characteristics Curves Figure 3: DC transfer characteristics Figure 4: current transfer ratio vs. forward current Figure 5: output current vs. input diode forward current Figure 6: Input diode forward current vs. forward voltage Figure 7: 6N139 propagation delay vs. temperature Figure 8: 6N138 propagation delay vs. temperature Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 13 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only Characteristics Curves Figure 9: 6N139 propagation delay vs. temperature Figure 11: Non-saturated rise and fall time vs. load resistance Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Figure 10: Forward voltage vs. temperature Figure 12: Logic low supply current vs. forward current Page : 14 of 15 L IT E - O N T E CH NO L O G Y CO RP O RAT IO N Property of Lite-on Only Notes: Specifications of the products displayed herein are subject to change without notice. The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical instrumentation and application. For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. Part No. : 6N138 / 6N139 series BNS-OD-C131/A4 Page : 15 of 15