COMPACT HIGH VOLTAGE POWER SUPPLY C4900 SERIES The C4900 series is an on-board type high voltage power supply, with a design that aims at providing both "compactness and high performance". The newly developed circuit achieves high performance and low power consumption. The C4900 series in addition provides enhanced protective functions yet is offered at lower costs. The C4900 and -01 are designed for negative output, while the C4900-50 and -51 have positive output. FEATURES Low Ripple / Noise Very compact and lightweight High stability Low power consumption Quick response Ample protective functions SPECIFICATIONS Parameter C4900 C4900-01 C4900-50 C4900-51 Unit Input Voltage Range +12 0.5 V +15 1 +12 0.5 +15 1 with no load Typ. 15 14 15 14 Input Current A mA with full load Typ. 95 90 95 90 0 to +1250 Variable Output Voltage Range V 0 to -1250 +200 to +1250 Specification Guaranteed Output Voltage Range V -200 to -1250 Max. Output Current 0.5 mA 0.6 0.5 0.6 Line Regulation Against 1 V or 0.5 V Typ. % 0.01 Input Change AB Load Regulation Against 0 % to 100 % Typ. % 0.01 Load Change A Typ. Ripple / Noise (p-p) AB % 0.003 Output Voltage Control By external controlling voltage (0 V to +5 V) or external potentiometer (50 k 2.5 k) -- Controlling Voltage Input Impedance Typ. 80 k Typ. Reference Voltage Output +5.13 (with 50 k external potentiometer) V Output Voltage Setting (Absolute Value) Typ. [(Controlling Voltage x 250) 0.5 %] 3 V Output Voltage Rise Time (0 % 99 %) AB Typ. 50 ms Typ. Temperature Coefficient AB 0.01 % / C 0 to +50 Operating Ambient Temperature AB C Operating Ambient Humidity C Below 80 % D -- Below 80 % Storage Temperature -20 to +70 C Storage Humidity C Below 80 % -- Weight 31 g Units protected against reversed power input, reversed / excessive controlling Protective Functions -- voltage input, continuous overloading / short circuit in output NOTE: AAt maximum output voltage. BAt maximum output current. CNo condensation. DAt 0 C to +40 C. Please contact our sales office if the operating ambient temperature is expected to be higher than +40 C. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2012 Hamamatsu Photonics K.K. COMPACT HIGH VOLTAGE POWER SUPPLY C4900 SERIES Figure 1: Connection Diagrams OUTPUT VOLTAGE CONTROL BY EXTERNAL VOLTAGE OUTPUT VOLTAGE CONTROL BY EXTERNAL POTENTIOMETER PIN ASSIGNMENT q w e t r q y w e t r q w e r t y y NO CONNECTION (IC) The housing is internally connected to pin w. Pins w and e are internally connected. MAX MIN +15 V or +12V +15 V or +12 V IN GND 1 (Input/Output GND) GND 2 (Controlling Voltage GND) HV ADJ (Controlling Voltage Input) Vref OUT (Reference Voltage Output: 5.13V Typ.) HV OUT +15 V or +12 V 0 V to +5 V* 50 k LOAD LOAD * The instability in the external controlling voltage should be minimised as it directly affects the output voltage quality. TACCC0049ED Figure 2: Output Voltage Controlling Characteristic (C4900, -01) TACCB0043EA +1500 -1250 +1250 -1000 +1000 -750 +750 -500 +500 -250 +250 0 0 2 1 3 4 5 5.3 6 q +15 V or +12 V OUTPUT VOLTAGE (V) OUTPUT VOLTAGE (V) -1500 Figure 3: Example of Ripple / Noise Reduction Circuit (C4900-50, -51) + 47 F (25 V) C4900 SERIES y w HV OUT 0.2 F (2 kV) INPUT GND OUTPUT GND * The ripple / noise can be halved by adding capacitors as illustrated above. 0 TACCC0099EB CONTROLLING VOLTAGE (V) Figure 4: Dimensional Outline (Unit: mm) Drilling Data for PC Board (Soldering Face) 12 3.81 15.88 15.88 4- 2 29 24 0.5 46 0.5 5 MIN. 11.7 y q w ert 0.3 1.5 2.5 15.88 3.81 MOUNTING TABS 15.88 ( * The mounting tabs can be bent to the right angle only once * The mounting tabs are solderable. 2.54 ) 6- 0.8 10.16 9.53 8.25 0.5x0.25 TACCA0159EB 2.54 10.16 17.78 TACCA0157EC (BOTTOM VIEW) * PATENT: USA No.5548502, 5568343 JAPAN: No.2758552, 2784136 HAMAMATSU PHOTONICS K.K. EUROPE: No.641066, 649222 www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se TACC1013E05 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it China: HAMAMATSU PHOTONICS (CHINA) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: hpc@hamamatsu.com.cn JUN. 2012 IP