Technical Data 4080 Effective October 2016
Supersedes December 2011
M Supercapacitors
Cylindrical cells
Description
Eaton supercapacitors are unique, ultra-high
capacitance devices utilizing electrochemical
double layer capacitor (EDLC) construction
combined with new, high performance materials.
This combination of advanced technologies
allows Eaton to offer a wide variety of capacitor
solutions tailored to specific applications that
range from a few micro-amps for several days to
several amps for milliseconds.
Features
• 2.5 Volts
• Low ESR
• High capacitance long cycle life
• Low ESR with high energy density
• Low leakage current
• UL recognized
Applications
• Pulse Power
• Bridge or hold-up power
Pb
HALOGEN
HF
FREE
2
Technical Data 4080
Effective October 2016
M Supercapacitors
Cylindrical cells
www.eaton.com/electronics
Ratings
Capacitance 1.0 F to 9.0 F
Maximum working voltage 2.5 V
Surge voltage 3.0 V
Capacitance tolerance -20% to +80% (+20 °C)
Operating temperature range -40 °C to +60 °C
Extended temperature range -40 °C to +85 °C (Maximum working voltage 2.0 V)
Specifications
Capacitance (F)
Part Number
Nominal ESR (Ω)
(Equivalent Series Resistance)
Measured @
1 kHz 100 Hz Nominal dimensions (mm)
(diameter x length) Typical Mass
(grams/piece)
1 M0810-2R5105-R 0.210 0.250 8 13 1.2
2 M0820-2R5205-R 0.075 0.100 8 20 1.5
3 M1020-2R5305-R 0.035 0.050 10 20.5 2.8
6 M1030-2R5605-R 0.025 0.035 10 30 3.9
9 M1325-2R5905-R 0.020 0.030 13 26 5.6
Performance
Parameter Capacitance change
(% of initial value) ESR
(% of max. initial value)
Life (1000 hours @ +60 °C @ 2.5 Vdc) ≤ 30% ≤ 200%
Storage - Low and High Temperature (1000 hours @ -40 °C and +60 °C) ≤ 30% ≤ 200%
Dimensions (mm)
Part Number D D’ L L’ F d’ C C’
M0810-2R5105-R 8.0 8.5 13.0 13.5 3.5 0.50 20.0 5.0
M0820-2R5205-R 8.0 8.5 20.5 21.0 3.5 0.50 20.0 5.0
M1020-2R5305-R 10.0 10.5 21.8 22.3 5.0 0.60 20.0 5.0
M1030-2R5605-R 10.0 10.5 31.0 31.5 5.0 0.60 20.0 5.0
M1325-2R5905-R 13.0 13.5 27.9 28.4 5.0 0.60 20.0 5.0
Tolerances Maximum ±0.5 ±0.02 Minimum
Part numbering system
M 1325 — 2R5 90 5 -R
Family Code Size reference
(mm) Voltage (V) R = Decimal
Capacitance (μF)
Value Multiplier Standard product
M Family Diameter = 13 Length = 25 2R5 = 2.5 V Example: 905 = 9 x 105 μF or 9.0 F
Packaging information
• Standard packaging: Bulk, 100 units per bag
• Larger bulk packages available on request
Part marking
• Manufacturer
• Capacitance (F)
• Nominal working voltage (V)
• Family code (or part number)
• Polarity
Eaton
Electronics Division
1000 Eaton Boulevard
Cleveland, OH 44122
United States
www.eaton.com/electronoics
© 2016 Eaton
All Rights Reserved
Printed in USA
Publication No. 4080
October 2016
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
M Supercapacitors
Cylindrical cells
Technical Data 4080
Effective October 2016
Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written
approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly
used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also
reserves the right to change or update, without notice, any technical information contained in this bulletin.
Wave solder profile
Profile Feature Standard SnPb Solder Lead (Pb) Free Solder
Preheat and soak • Temperature max. (Tsmax)100 °C 100 °C
• Time max. 60 seconds 60 seconds
D preheat to max Temperature 160 °C max. 160 °C max.
Peak temperature (TP)* 220 °C – 260 °C 250 °C – 260 °C
Time at peak temperature (tp)10 seconds max
5 seconds max each wave
10 seconds max
5 seconds max each wave
Ramp-down rate ~ 2 K/s min
~3.5 K/s typ
~5 K/s max
~ 2 K/s min
~3.5 K/s typ
~5 K/s max
Time 25 °C to 25 °C 4 minutes 4 minutes
Manual solder
+350 °C, 4-5 seconds. (by soldering iron), generally manual, hand soldering is not recommended.
Reflow soldering
Do not use reflow soldering using infrared or convection oven heating methods.
Cleaning/Washing
Avoid cleaning of circuit boards, however if the circuit board must be cleaned use static or ultrasonic immersion in a standard circuit board
cleaning fluid for no more than 5 minutes and a maximum temperature of +60 °C. Afterwards thoroughly rinse and dry the circuit boards. In
general, treat supercapacitors in the same manner you would an aluminum electrolytic capacitor.
Temperature
Time
T
smin
Tsmax
Tstyp
Tp
tp
First Wave Second Wave
Preheat area Cool down area
