AV series Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable * Irremovable * Anti-jamming construction : reduced travel to prevent insertion of foreign parts * Contact and mechanism protected against crushing * Fire resistant * Long life B Different actuator shapes Sealed versions Degree of protection of sealed versions (switches mounted on vertical panels) : IP65 to IP67 UL/CSA approved models EXAMPLES OF MOUNTING FOR SEALED VERSIONS Preferred For thin panels Gasket With boot U2187 (sect. H) Packaging unit : specified on the following pages. Mounting accessories : Standard and special hardware are presented in section I. Sealing boots are available for models with O 19 mm (.748) bushing. See Section H. B-90 www.apem.com APEM AV series Anti-vandal and security pushbutton switches Selection guide The AV series is a large range of very robust pushbutton switches, consisting of 2 families : ANTI-VANDAL PUSHBUTTON SWITCHES (pages B-92 to B-94) * Great robustness (impact resistance IK08 (O 19 mm) and IK10 (O 22 mm) * Actuator and bushing : stainless steel * Bushing O 19 mm (.748) or 22 mm (.866) Bushing O 19 mm (.748) Actuator flat curved Bushing O 22 mm (.866) flush flat curved no no no no yes no yes 48VDC AV09100 AV19100 AV9D100 AV03100 AVM3100 AV02100 AVM2100 250VAC AV09000 AV19000 AV9D000 AV03000 AVM3000 AV02000 AVM2000 Flat on bushing B SECURITY PUSHBUTTON SWITCHES (pages B-95 to B-115) * Large variety of models * Actuator and bushing : nickel plated, chrome plated or polished varnished brass, stainless steel * Bushing diameter 16 mm (.629), 19 mm (.748), 22 mm (.866) or 24 mm (.944) * Marking * Illumination, tactile feedback * Numerous electrical functions (momentary or maintained) Bushing O 16 mm (.629) flat Actuator curved Page hex knurled hex knurled Momentary (NO) tactile AV063 AV6P3 AV163 AV6B3 B-95 Latching (on-off) AV061 - AV161 - B-96 Mounting nut Bushing O 19 mm (.748) flat Actuator Mounting nut Momentary (NO) Momentary NC/NO curved Page hex knurled hex knurled AV09*003 AV9P*003 AV19*003 AV9B*003 B-98 AV19LP - Latching (on-on) AV091**EA Momentary NO tactile Momentary NO tactile overmolded actuator AV09C7*3 - AV9S*D - - B-101 AV191**EA - B-102 AV19C7*3 - B-104 - - B-106 Bushing O 22 mm (.866) flat Actuator curved concave Page hex knurled hex knurled hex Momentary (NO) AV03*003 - AV02*003 - - B-108 Momentary (NC) AV031202 - AV021202 - - B-109 Mounting nut AV031**EA - AV021**EA - - B-111 Mom. NC/NO, O 26 actuator AV22LP - AV22LB - AV22LC B-113 Mom. NC/NO, O 30 actuator - - AV22PNA* - - B-115 Latching (on-on) Bushing O 24 mm (.944) Actuator Momentary (NO) flat curved concave Page AV24LP AV24LB AV24LC B-114 Please contact APEM for any product not mentioned in the above tables. APEM www.apem.com B-91 AV series Anti-vandal pushbutton switches Distinctive features and specifications Very robust Impact resistance IK08 for model O 19 mm (.748) and IK10 for model O 22 mm (.866) Stainless steel actuator and bushing UL-CSA approved (long case only) B SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : - A contacts : 4A 12VDC, 500.000 cycles - C contacts : 2A 48 VDC, 10.000 cycles * Approved ratings of models with long case and A contacts (AV..000) : UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles * Initial contact resistance : 10 m max. at 1A 2V * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 11 mm (.433) max. * Operating temperature : -30C to +70C * Mechanical life : 1.000.000 cycles * Hand soldering : 300C, 3 sec. max. * Packaging unit : 20 pieces (models O 22) or 40 pieces (models O 19) * Case : PBT * Contacts : silver (A) or brass, silver plated (C) * Bushing : stainless steel * Actuator : stainless steel CUT-OUT * Panel cut-out : O 19,2 mm (.755) or O 22,2 mm (.874) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) SEALING ( OPTION T ) ROBUSTNESS 2 Model O 19 mm (.748) Model O 22 mm (.866) 5 Kg 1.7 Kg Degree of protection according to EN 50102, June 95 (NFC 20-015) IK08 29.5 cm Hammer radius 25 mm Striking energy: 5 joules (5Nm) 40 cm Hammer radius 50 mm Increased impact resistance provided by a nut or mechanical stop. B-92 www.apem.com IK10 Striking energy: 20 joules (20Nm) 1 Front panel sealing (IP65) internal gasket external gasket Option N does not include nor . APEM AV series Anti-vandal pushbutton switches O 19 mm (.748) Momentary (NO) ORDER FORMAT AV 3 SERIES NO (function 3) Actuator type 09 Flat 19 Curved 9D Flush Case 000 Long 100 Short 40 Function 3 NO A C Contacts Silver Brass, silver pl. Terminals 9 Screw 2 Quickconnect Bush./act. material 40 Stainless steel N T Sealing No Sealed B In the following model numbers, replace * with elements selected in the above order format. Hex nut 22 (.866) across flats Flat actuator - short case - 48VDC - AV09100 3.00 (.118) o19.00x1.00 SI (.748DIAx1.00 IS) 7.30 (.287) 1.20 (.047) 2.80x0.5 (.110x.019) Solder lug / quick-connect term. AV091003*240* 2.80 (.110) o22.00 (.866DIA) o22.00 (.866DIA) Screw terminals AV091003*940* o15.00 (.590DIA) 5.00 (.196) Screw terminals for wires 1,5 mm2 max. 9.50 (.374) 2.00 (.078) 6.50 (.255) 3.00 (.118) EPOXY Hex nut 22 (.866) across flats Flat actuator - long case - 250VAC - UL/CSA - AV09000 3.00 (.118) O19.00x1.00 SI (.748DIAx1.00 IS) O15.00 (.590DIA) O22.00 (.866DIA) Screw terminals AV090003A940* O22.00 (.866DIA) 5.00 (.196) To order switches marked UL-CSA, add "UU"at the end of model number. 2.00 (.078) Screw terminals for wires 1,5 mm2 max. Curved actuator - AV19 7.20 (.283) O22.20 Mini (.874DIA Min.) Screw terminals AV9D*003*940* Solder lug / quick-connect terminals (short case only) AV9D1003*240* www.apem.com 1.30 Mini (.051 Min.) 1.20 (.047) 2.00 (.078) 3.60 (.141) O22.00 (.866DIA) Screw terminals AV19*003*940* Solder lug/quick-connect term. (short case) AV191003*240* APEM 6.50 (.255) Flush model - AV9D O22.00 (.866DIA) O15.00 (.590DIA) 11.60 (.456) O19.20 (.755DIA) Panel cut-out B-93 AV series Anti-vandal pushbutton switches O 22 mm (.866) Momentary (NO) ORDER FORMAT AV 3 SERIES NO (function 3) Bushing/act. Case Function configuration 000 Long 3 NO 03 Flat act. 100 Short 02 Curved act. M3 Flat act + flatted bush. M2 Curved act.+ flatted bush. A C Contacts Silver Brass, silver pl. Terminals 9 Screw 2 Quickconnect Bush./act. material 40 Stainless steel N T Sealing No Sealed In the following model numbers, replace * with elements selected in the above order format. Hex nut 25 (.984) across flats Flat actuator - short case - 48VDC - AV03100 o22.00x1.00 SI (.866DIAx1.00 IS) 2.00 (.078) 7.30 (.287) 3.00 (.118) 1.20 (.047) 2.80x0.5 (.110x.019) Solder lug / quick-connect term. AV031003*240* o15.00 (.59DIA) Screw terminals AV031003*940* o25.00 (.984DIA) 2.80 (.110) 12.70 (.500) Screw terminals for wires 1,5 mm2 max. 6.30 (.248) EPOXY 5.00 (.196) Hex nut 25 (.984) across flats Flat actuator - long case - 250 VAC - UL/CSA - AV03000 O22.00x1.00 SI (.866DIAx1.00 IS) 2.00 (.078) 3.00 (.118) O15.00 (.59DIA) O25.00 (.984DIA) Screw terminals AV030003A940* To order switches marked UL-CSA, add "UU" at the end of model number. 15.00 (.590) Screw terminals for wires 1,5 mm2 max. Curved actuator - AV02 O15.00 (.590DIA) Screw terminals AV02*003*940* Solder lug / quick-connect (short case) AV021003*240* B-94 5.00 (.196) O25.00 (.984DIA) 2.00 (.078) O15.00 (.590DIA) 10.00 (.248) Flatted bushing - AVM3 and AVM2 O25.00 (.984DIA) 3.60 (.141) B 40 Flat actuator, screw terminals AVM3*003*940* Curved actuator, screw terminals AVM2*003*940* www.apem.com O22.20 (.874DIA) 10.00 (.393 ) Panel cut-out APEM AV series Snap action security pushbutton switches O 16 mm (.629) Momentary (NO) ORDER FORMAT AV 3 Bushing/act. configur. SERIES 06 Flat actuator 16 08 07 6P 6B NO (function 3) Curved actuator Curved act.+chamfer Flat act.+chamfer Flat act.+knurled nut Curved act.+knurled nut Function 3 NO 0 0 Case Short C 9 OPTIONS Contacts C Brass, silver pl. Terminals 9 Screw See "Options" page (B97) SPECIFICATIONS MATERIALS * Travel : 1,60 mm (.063) 0,3 mm (.011) * Max. current/voltage rating with resistive load : 200mA 48 VDC - 100mA 48VDC * Initial contact resistance : 50 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame * Electrical life : 50.000 cycles at 200mA 48VDC 100.000 cycles at 100mA 48VDC * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -30C to +70C * Mechanical life : 1.000.000 cycles * Packaging unit : 60 pieces * Case : PBT * Contacts : brass, silver plated (C) * Bushing and actuator : see "Options" page CUT-OUT * Panel cut-out : O 16,2 mm (.637) * Min. pitch for matrix mounting : 24 mm x 24 mm (.944 x .944) (AV6P & AV6B : 20 mm x 20 mm) To order a product, select a basic model below and add the desired options. BASIC MODEL Hex nut 19 (.748) across flats Flat or curved actuator - screw terminals 3.00 (.118) Curved actuator AV1630C9 O12.00 (.472DIA) O18.00 (.708DIA) Flat actuator AV0630C9 O16.00X1.00 SI (.629DIAX1.00 IS) 3.00 (.118) 1.50 (.059) 11.20 (.440) 9.50 (.374) Screw terminals for wires 1,5 mm2 max. With knurled nut for matrix mounting 20 x 20 - AV6P and AV6B O18.00 (.708DIA) O12.00 (.472DIA) ! New O18.00 (.708DIA) 20.00 (.787) O12.00 (.472DIA) 20.00 (.787) 20.00 (.787) 2.00 (.078) 1.50 (.059) With chamfer O18.00 (.708DIA) Curved actuator AV0830C9 APEM Flat actuator AV0730C9 Flat actuator AV6P30C9 O18.00 (.708DIA) Curved actuator AV6B30C9 www.apem.com Wrench available under P/N U1990. B-95 B AV series Security pushbutton switches O 16 mm (.629) Latching action ORDER FORMAT AV 1 Actuator 06 Flat 16 Curved SERIES ON OFF 1 1 Function Off-On 1 A Case Long OPTIONS Contacts A Silver SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load :1,5A 250VAC - 1A 24VDC * Initial contact resistance : 50m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.500 Vrms 50 Hz min. between terminals 1 000 Vrms 50 Hz between terminals and frame * Electrical life : 100.000 cycles at 1,5A 250VAC 40.000 cycles at 1A 24VDC * Torque : 5 Nm min. - 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -30C to +70C * Mechanical life : 200.000 cycles * Hand soldering : 300C, 5 sec. max. * Packaging unit : 25 pieces * Case : PA-6T, UL94-V0 * Contacts : silver (A) Gold plated silver (AD) on request * Bushing and actuator : see "Options" page CUT-OUT * Panel cut-out : O 16,2 mm (.637) * Min. pitch for matrix mounting : 24 mm x 24 mm (.944 x .944) To order a product, select a basic model below and add the desired options. BASIC MODEL Hex nut 19 (.748) across flats Flat or curved actuator - solder lug terminals 3.40 (.133) OFF - ON O16.00X1.00 SI (.629DIAX1.00 IS) Curved actuator AV1611A2 1.40 (.055) ON 2.30 (.090) O12.00 (.472DIA) - O18.00 (.708DIA) OFF 3.00 (.118) O12.00 (.472DIA) Flat actuator AV0611A2 O18.00 (.708DIA) 3.00 (.118) EPOXY 1.50 (.059) Straight PC terminals 9.00 (.354) 15.20 (.598) Quick-connect terminals 5.08 (.200) EPOXY EPOXY 1.10 (.043) 0.50 (.019) 1.20 (.047) 2.40 (.094) 0.50 (.019) 8.00 (.314) 3.50 (.137) B See "Options" page (B97) Terminals 2 Solder 4 PC 8 Quickconnect 2.80 (.047) Flat actuator AV0611A4 B-96 Curved actuator AV1611A4 Flat actuator AV0611A8 www.apem.com Curved actuator AV1611A8 APEM AV series Security pushbutton switches O 16 mm (.629) Options After selecting basic model number, fill in last 2 boxes with desired options. Bushing/act. material Sealing BASIC MODEL BUSHING/ACTUATOR MATERIALS Flat or curved metal actuator CODE BUSHING ACTUATOR 00 (standard) 10 12 20 30 40 Nickel plated brass Nickel plated brass Nickel plated brass Chrome plated brass Chrome plated brass Stainless steel Nickel plated brass Stainless steel Chrome plated brass Chrome plated brass Stainless steel Stainless steel B SEALING Blank No sealing K Front panel sealing (IP65) APEM www.apem.com B-97 AV series Security pushbutton switches O 19 mm (.748) Momentary (NO) ORDER FORMAT AV 3 SERIES 09 19 9P 9B NO (function 3) Bushing/act. config. Case Flat actuator 000 Long Curved actuator 100 Short Flat act., knurled nut Curved act., knurled nut Function 3 NO OPTIONS A C Contacts Terminals See "Options" page (B100) Silver 9 Screw Brass 2 Quicksilver pl. connect SPECIFICATIONS * Max. current/voltage rating with resistive load : - A contacts : 4A 12VDC, 500.000 cycles - C contacts : 2A 48 VDC, 10.000 cycles * Approved ratings of models with long case and A contacts (AV..000) : UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles * Initial contact resistance : 10 m max. at 1A 2V * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 11 mm (.433) max. * Operating temperature : -30C to +70C * Mechanical life : 1.000.000 cycles * Hand soldering : 300C, 3 sec. max. * Packaging unit : 40 pieces * Case : PBT * Contacts : silver (A) or brass, silver plated (C) * Bushing and actuator : see "Options" page CUT-OUT * Panel cut-out : O 19,2 mm (.755) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) (AV9P & AV9B : 25 mm x 25 mm) To order a product, select a basic model below and add the desired options. BASIC MODEL Hex nut 22 (.866) across flats Flat actuator - short case - 48VDC - AV09100 o19.00x1.00 SI (.748DIAx1.00 IS) 2.00 (.078) 1.20 (.047) 2.80 (.110) 2.80x0.5 (.110x.019) Solder lug / quick-connect term. AV091003*2 7.30 (.287) 3.00 (.118) o15.00 (.590DIA) o22.00 (.866DIA) Screw terminals AV091003*9 13.50 (.531) 5.50 (.216) 5.00 (.196) EPOXY Screw terminals for wires 1,5 mm2 max. Contacts : remplace * with A (silver) or C (silver plated brass). O15.00 (.590DIA) Flat actuator, screw terminals AV9P1003*9 Flat actuator, solder lug term. AV9P1003*2 www.apem.com 25.00 (.984) 4.50 (.177) O15.00 (.590DIA) O15.00 (.590DIA) 4.50 (.177) O22.00 (.866DIA) 2.00 (.078) O22.00 (.866DIA) Screw terminals AV191003*9 Solder lug / quick-connect terminals AV191003*2 B-98 With knurled nut for matrix mounting 25 x 25 - AV9P and AV9B O22.00 (.866DIA) 25.00 (.984) 25.00 (.984) Curved actuator - short case 3.60 (.141) B MATERIALS Curved actuator, screw terminals AV9B1003*9 Curved actuator, solder lug term. AV9B1003*2 Wrench available under P/N U1929 APEM AV series Security pushbutton switches O 19 mm (.748) Momentary (NO) Hex nut 22 (.866) across flats Flat actuator - long case - 250VAC - UL/CSA - AV09000 3.00 (.118) O19.00x1.00 SI (.748DIAx1.00 IS) O22.00 (.866DIA) Screw terminals AV090003A9 O15.00 (.590DIA) 5.00 (.196) To order switches marked UL-CSA, add "UU" at the end of model number. 2.00 (.078) 14.80 (.582) 10.50 (.413) Screw terminals for wires 1,5 mm2 max. Screw terminals AV190003A9 APEM With knurled nut for matrix mounting 25 x 25 - AV9P and AV9B O15.00 (.590DIA) O15.00 (.590DIA) O15.00 (.590DIA) Flat actuator, screw terminals AV9P0003A9 25.00 (.984) Curved actuator, screw terminals AV9B0003A9 www.apem.com 25.00 (.984) 25.00 (.984) O22.00 (.866DIA) 4.50 (.177) O22.00 (.866DIA) 4.50 (.177) O22.00 (.866DIA) 2.00 (.078) 3.60 (.141) Curved actuator - long case B Wrench available under P/N U1929. B-99 AV series Security pushbutton switches O 19 mm (.748) Options After selecting basic model number, fill in last 3 boxes with desired options. Bush./actuator material Marking Sealing BASIC MODEL BUSHING/ACTUATOR MATERIALS Flat or curved metal actuator B CODE BUSHING ACTUATOR 00 (standard) 10 12 20 30 40 80 Nickel plated brass Nickel plated brass Nickel plated brass Chrome plated brass Chrome plated brass Stainless steel Varnished polished brass Nickel plated brass Stainless steel Chrome plated brass Chrome plated brass Stainless steel Stainless steel Varnished polished brass CODE BUSHING ACTUATOR COLOUR 0* (standard) 2* 8* Nickel plated brass Chrome plated brass Varnished polished brass Replace * with one of the following codes. Flat thermoplastic actuator 1 : blue - 1/4 : dark blue - 2 : black - 3 : green 4 : grey - 5 : yellow - 6 : red - 7/1: white 9 : orange Select an option from each of the two tables below. MARKING - By engraving on flat or curved brass actuator (stainless steel on request) - by hot stamping on flat thermoplastic actuator 8.00 (0.314) O15.00 (0.590DIA) TYPE OF MARKING CODE TYPE 0 to 9 X Y A to N P to W 0 Numbers 0 to 9 Symbol * Symbol # Letters A to N Letters P to W Letter O Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces 1.50 (0.059) COLOUR OF MARKING CODE Brass actuator 0 (standard) 2 COLOUR Same as finish Black Note : a finished product supplied in version "0" cannot be modified to version "2". Thermoplastic actuator 2 Black 7 White SEALING Blank No sealing 2 1 K Frontal panel sealing (IP65) B-100 internal gasket external gasket www.apem.com APEM AV series New! Security pushbutton switches O 19 mm (.748) Momentary (NC/NO) ORDER FORMAT AV 19 L P SERIES Bushing diameter Bushing/act. config. Actuator shape P Flat C C C 40 9 Act./bushing material 40 Stainless steel Combined NC/NO SPECIFICATIONS Terminals 00 PC 04 Wire leads MATERIALS * Max. current/voltage rating with resistive load : 2A 12VDC, 200.000 cycles - 1A 24VDC, 200.000 cycles 3A 125Vca - 0,2A 60VDC - 6.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance: 100 M min. at 500VDC * Dielectric strength : 500 Vrms 50 Hz min. * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -20C to +55C * Mechanical life : 1.000.000 cycles * Front panel sealing : IP65 * Hand soldering : 300C, 3 seconds max. * Packaging unit : models with straight PC terminals : 20 pieces Models with wire lead terminals : individual bags BASIC MODEL Microswitch type * Contacts : silver * Bushing and actuator : stainless steel CUT-OUT * Panel cut-out : O 19,2 mm (.755) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) The common terminal is indicated by the letter C on the drawing. Flat actuator - straight PC terminals O-Ring Hex nut 22 (.866) across flats 5.08 5.08 (.200) (.200) 2.00 (.078) C O19.00x1.00 SI (.748DIAx1.00 IS) O15.00 (.590DIA) 5.80 (.228) AV19LP40900 O22.00 (.866DIA) C C 13.50 (.531) Flat actuator - wire lead terminals O-Ring 9.30 (.366) 2.90 (.114) Hex nut 22 (.866) across flats 50010mm (19.68.393) 2.00 (.078) O15.00 (.590DIA) AV19LP40904 O22.00 (.866DIA) C 13.50 (.531) Wire length : 500 mm APEM 9.30 (.366) O19.00x1.00 SI (.748DIAx1.00 IS) In the upper position (ON), the closed circuit is through the red wires. In the lower position (MOM), the closed circuit is through the blue wires. www.apem.com B-101 B AV series New! Security pushbutton switches O 19 mm (.748) Latching - illuminated and non-illuminated ORDER FORMAT AV 1 Actuator type 09 Flat 19 Curved SERISE E Bush./act. config. Illumin. 0 No L Illum. 0 1 3 5 6 LED colour No LED Blue Green Yellow Red OPTIONS See next page Function Terminals 2 Solder Contacts 4 PC 8 Quickconnect SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 2A 48 VDC * LED voltage and consumption : blue 3,5V 10mA, green : 2V 10mA yellow & red : 2V 20mA (a resistor must be series-connected by the user)** * Initial contact resistance : 50 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 1 000 Vrms 50 Hz min. between terminals 500 Vrms 50 Hz min. between terminals and bushing * Electrical life : 500.000 cycles at 2A 48VDC * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 9 mm (.354) max. * Operating temperature : -30C to +70C * Mechanical life : 1.000.000 cycles * Hand soldering : 300C, 4 seconds max. * Packaging unit : 20 pieces * Case : PA6T UL94-V0 * Contacts : silver * Bushing and actuator : see next page * LED CUT-OUT * Panel cut-out : O 19,2 mm (.755) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181 x 1.181) To order a product, select a basic model below and add the desired options selected on next page. ** Resistor value = supply voltage - LED forward voltage LED forward current Standard actuator position : the actuator is flush in the non-latched position and recessed in the latched position. Hex nut 22 (.866) across flats O19.00x1.00 SI (.748DIAx1.00 IS) 3.60 (.141) 3.00 (.118) 2.00 (.078) NC ON Curved actuator AV19100EA2 ON - ON NO 1.40 (.055) - O15.00 (.590DIA) ON O22.00 (.866DIA) 2.30 (.090) Flat actuator * AV09100EA2 0.50 (.019) Non-illuminated - solder lug terminals NC 13.50 (.531) 10.70 (.421) 2.80 (.110) * Also available with prominent actuator in the non-latched position Hex nut 22 (.866) across flats O19.00x1.00 SI (.748DIAx1.00 IS) 3.00 (.118) 2.00 (.078) 2.30 (.090) - ON O3.20 (.125DIA) NO 1.40 (.055) ON O15.00 (.590DIA) Flat actuator AV091L*EA2 NC 0.50 (.019) Illuminated - solder lug terminals O22.00 (.866DIA) B A NC 13.50 (.531) 10.70 (.421) 2.80 (.110) Replace * with desired LED colour. B-102 www.apem.com APEM AV series New! Security pushbutton switches O 19 mm (.748) Latching - Options Quick-connect terminals 8.00 (.314) 3.40 (.133) Straight PC terminals 1.20 (.047) 2.40 (.094) 1.10 (.043) 2.80 (.110) Replace 2 with 4 at the end of the model numbers shown on previous page. Replace 2 with 8 at the end of the model numbers shown on previous page. B After selecting basic model number, fill in last 2 boxes with desired options. Bushing/ act. material Sealing BASIC MODEL BUSHING/ACTUATOR MATERIALS CODE BUSHING ATUATOR 00 (std) 10 40 50 Nickel plated brass Nickel plated brass Stainless steel Stainless steel Nickel plated brass Stainless steel Stainless steel Nickel plated brass SEALING Blank No sealing 1 K 2 Frontal panel sealing (IP65) APEM elastomeric membrane external gasket www.apem.com B-103 AV series Snap-action security pushbutton switches O 19 mm (.748) Illuminated and non-illuminated - momentary (NO) ORDER FORMAT AV SERIES NO (function 3) C7 3 Case Actuator type 09 Flat 19 Curved 0 L OPTIONS Function Illumin. No Illum. SPECIFICATIONS MATERIALS * Travel : 0,7 mm (.027) 0,1 mm (.003) * Max. current/voltage rating with resistive load : 50mA 24VDC * LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA Other colours : 2V (3V max.) 10mA A resistor must be series-connected by the user ** * Initial contact resistance : 100 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 500 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between terminals and bushing * Electrical life : 1.000.000 cycles at full load * Operating force : 7 N -2N * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -30C to +70C * Hand soldering : 270C, 3 seconds max. * Packaging unit : 40 pieces * Case : PBT UL94-V0 * Terminals : brass, gold plated * Contacts : gold plated dome * Bushing and actuator : see next page * LED CUT-OUT * Panel cut-out : O 19,2 mm (.755) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) To order a product, select a basic model below and add the desired options selected on next page. ** Resistor value = supply voltage - LED forward voltage LED forward current Hex nut 22 (.866) across flats Flat actuator - non-illuminated O19.00x1.00 SI (.748DIAx1.00 IS) 2.00 (.078) 2.00 (.078) 3.00 (.118) 1.90 (.074) O15.00 (.590DIA) O22.00 (.866DIA) Screw terminals AV09C703D9 O15.00 (.590DIA) O22.00 (.866DIA) 1.10 (.043) Solder lug terminals AV09C703D2 EPOXY 4.15 (.163) 13.50 (.531) Also available with curved actuator : AV19C703D2 or AV19C703D9 3.90 (.153) 13.50 (.531) 13.20 (.519) Hex nut 22 (.866) across flats Flat actuator - illuminated O19.00x1.00 SI (.748DIAx1.00 IS) 2.00 (.078) 2.00 (.078) 3.00 (.118) O10.00 (.393DIA) O15.00 (.590DIA) - O22.00 (.866DIA) + O15.00 (.590DIA) Screw terminals AV09C7L3D9 1.90 (.074) 1.10 (.043) Solder lug terminals AV09C7L3D2 O22.00 (.866DIA) B See next page Terminals 2 Solder 9 Screw EPOXY 4.15 (.163) 13.50 (.531) B-104 www.apem.com 13.20 (.519) 13.50 (.531) 3.90 (.153) APEM AV series Snap-action security pushbutton switches O 19 mm (.748) Options Bushing/act. material After selecting basic model no., fill in last 4 boxes with desired options. LED colour Marking Sealing BASIC MODEL BUSHING/ACTUATOR MATERIALS Non-illuminated models Illuminated models CODE BUSHING ACTUATOR CODE BUSHING ACTUATOR 00 (std) 10 30 40 80 Nickel plated brass Nickel plated brass Chrome plated brass Stainless steel Varnished polished brass Nickel plated brass Stainless steel Stainless steel Stainless steel Varnished polished brass 00 (std) 20 40 50 80 Nickel plated brass Chrome plated brass Stainless steel Stainless steel Varnished polished brass Nickel plated brass Chrome plated brass Stainless steel Nickel plated brass Varnished polished brass LED COLOURS No LED Blank 1: Blue - 3 : Green - 5 : Yellow - 6 : Red - 7 : White - 9 : Amber - 2 : Red/green Select an option from each of the two tables below. MARKING For flat or curved actuator. TYPE OF MARKING - by engraving on non-illuminated brass actuator (stainless steel on request). - by hot stamping on thermoplastic insert (illuminated actuators) O10.00 (0.393DIA) CODE TYPE 0 to 9 X Y A to N P to W 0 Numbers 0 to 9 Symbol * Symbol # Letters A to N Letters P to W Letter O 8.00 (0.314) Letter O : same code and same design as number 0. 1.00 (0.039) 1.50 (0.059) For special symbols, consult factory. Minimum order : 500 pieces COLOUR OF MARKING CODE COLOUR Non-illuminated actuators 0 (standard) Same as finish 2 Black Note : a finished product supplied in version "0" cannot be modified to version "2". Illuminated actuators 2 Black (on white) SEALING Blank No sealing 2 1 K Front panel sealing (IP65) APEM internal gasket external gasket www.apem.com B-105 B AV series Snap-action security pushbuttons O 19 mm (.748) with overmolded actuator Illuminated and non-illuminated - momentary (NO) ORDER FORMAT AV 9 SERIES Bush./act. configuration NO (function 3) D Illumination S0 No SL Illum. Contacts OPTIONS See next page Terminals 2 Solder 9 Screw SPECIFICATIONS * Travel : 0,7 mm (.027) 0,1 mm (.003) * Max. current/voltage rating with resistive load : 50mA 24VDC * LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA Other colours : 2V (3V max.) 10mA (a resistor must be series-connected by the user)** * Initial contact resistance : 100 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 500 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between terminals and bushing * Electrical life : 1.000.000 cycles at full load * Operating force : 7 N 2N * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -30C to +70C * Hand soldering : 270C, 3 sec. max. * Packaging unit : 40 pieces ** Resistor value = supply voltage - LED forward voltage LED forward current * Case : PBT UL94-V0 * Terminals : brass, gold plated * Contacts : gold plated dome * Bushing : see next page * Actuator : stainless steel, with thermoplastic overmolding * LED CUT-OUT * Panel cut-out : O 19,2 mm (.755) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) To order a product, select a basic model below and add the desired options selected on next page. Hex nut 22 (.866) across flats Flat actuator - solder lug terminals 3.00 (.118) 2.00 (.078) 2.00 (.078) 1.90 (.074) O10.00 (.393DIA) O15.00 (.590DIA) O22.00 (.866DIA) O15.00 (.590DIA) O22.00 (.866DIA) Non-illuminated AV9S0D2 1.10 (.043) Illuminated AV9SLD2 EPOXY 4.15 (.163) 4.30 (.169) 9.80 (.385) Also available with bushing O 22 (.866) : on request. Hex nut 22 (.866) across flats Flat actuator - screw terminals 2.00 (.078) 3.00 (.118) 9.00 (.354) O10.00 (.393DIA) O15.00 (.590DIA) 2.00 (.078) O22.00 (.866DIA) Non-illuminated AV9S0D9 O15.00 (.590DIA) Illuminated AV9SLD9 O22.00 (.866DIA) B MATERIALS 9.80 (.385) 4.30 (.169) Also available with bushing O 22 (.866) : on request. B-106 www.apem.com APEM AV series Snap-action security pushbuttons O 19 mm (.748) with overmolded actuator Options Bushing material After selecting basic model no., fill in last 5 boxes with desired options. Overmolding LED colour Actuator type Sealing BASIC MODEL BUSHING MATERIALS OVERMOLDING COLOURS LED COLOURS CODE MATERIAL CODE COLOUR CODE COLOUR CODE 0 (std) 2 4 5 6 7 8 9 Nickel plated brass Chrome plated brass Stainless steel Gold plated brass Chrome plated brass, satin Chrome pl. brass, matt black Varnished polished brass Polished brass 1 2 3 4 5 Blue Black * Green Grey * Yellow 6 7 8 9 Red White Translucent Orange * non-illuminated only Blank 1 2 3 5 6 7 9 COLOUR No LED Blue Red/green Green Yellow Red White Amber B ACTUATOR STYLES The ring and symbols are obtained by photochemical engraving of a stainless steel insert. The insert is then overmolded in the desired colour. The following actuator styles are available. For other types, consult factory. CODE 001 002 003 004 005 DESCRIPTION Illuminated ring and disc Illuminated ring Arrow Loudspeaker OFF Double arrow RING/SYMBOL SEALING Blank No sealing 2 1 K Front panel sealing (IP67) APEM internal membrane external gasket www.apem.com B-107 AV series Security pushbutton switches O 22 mm (.866) Momentary (NO) ORDER FORMAT AV SERIES NO (function 3) 3 Bushing/act. configuration 03 Flat actuator 02 Curved actuator M2 Flat act. + flatted bush. M3 Curved act.+ flatted bush. Case 000 Long 100 Short Function 3 NO OPTIONS A C Contacts Silver Brass, silver pl. SPECIFICATIONS Terminals Screw Quickconnect See "Options" page (B110) MATERIALS * Max. current/voltage rating with resistive load : - A contacts : 4A 12VDC, 500.000 cycles - C contacts : 2A 48 VDC, 10.000 cycles * Approved ratings of models with long case and A contacts (AV..000) : UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles * Initial contact resistance : 10 m max. at 1A 2V * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 11 mm (.433) max. * Operating temperature : -30C to +70C * Mechanical life : 1.000.000 cycles * Hand soldering : 300C, 3 sec. max. * Packaging unit : 20 pieces * Case : PBT * Contacts : silver (A) or brass, silver plated (C) * Bushing and actuator : see "Options" page CUT-OUTS * Panel cut-out : O 22,2 mm (.874) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) To order a product, select a basic model below or on next page and add the desired options. BASIC MODEL Hex nut 25 (.984) across flats Flat actuator - short case - 48VDC - AV03100 o22.00x1.00 SI (.866DIAx1.00 IS) 2.00 (.078) 7.30 (.287) 3.00 (.118) 1.20 (.047) 2.80x0.5 (.110x.019) Solder lug / quick-connect term. AV031003*2 o15.00 (.59DIA) Screw terminals AV031003*9 o25.00 (.984DIA) 2.80 (.110) 12.70 (.500) Screw terminals for wires 1,5 mm2 max. 6.30 (.248) EPOXY 5.00 (.196) Contacts : remplace * with A (silver) or C (silver plated brass). Curved actuator - short case Flatted bushing - short case - AVM3 and AVM2 O25.00 (.984DIA) O15.00 (.590DIA) O15.00 (.590DIA) O25.00 (.984DIA) 2.00 (.078) 3.60 (.141) B 9 2 O22.20 (.874DIA) Screw terminals AV021003*9 Solder lug / quick-connect terminals AV021003*2 B-108 Flat actuator, screw terminals AVM31003*9 Curved actuator, screw terminals AVM21003*9 www.apem.com 10.00 (.393 ) APEM AV series Security pushbutton switches O 22 mm (.866) Momentary (NO) and momentary (NC) Hex nut 25 (.984) across flats Flat actuator - long case - 250VAC - UL/CSA - AV03000 O22.00x1.00 SI (.866DIAx1.00 IS) 2.00 (.078) O15.00 (.59DIA) O25.00 (.984DIA) Screw terminals AV030003A9 3.00 (.118) To order switches marked UL-CSA, add "UU" at the end of model number. 15.00 (.590) Screw terminals for wires 1,5 mm2 max. Curved actuator - long case B O15.00 (.590DIA) O25.00 (.984DIA) 2.00 (.078) 3.60 (.141) 5.00 (.196) Flatted bushing - long case - AVM3 and AVM2 O25.00 (.984DIA) O15.00 (.590DIA) 10.00 (.248) O22.20 (.874DIA) Flat actuator, screw terminals AVM30003*9 Curved actuator, screw terminals AVM20003*9 Screw terminals AV020003A9 10.00 (.393 ) MOMENTARY NORMALLY CLOSED MODEL (NC) Hex nut 25 (.984) across flats Bushing O 22 (.866) - AV..1200 Flat actuator AV031202C900 APEM O22.00x1.00 SI (.866DIAx1.00 IS) Curved actuator AV021202C900 3.60 (.141) www.apem.com O3.00x0.50 (.118DIAx.0.50) 13.20 14.00 (.551) 15.40 (.606) (.519) 3.00 (.118) O15.00 (.59DIA) O25.00 (.984DIA) 2.00 (.078) O15.00 (.59DIA) * Single pole, screw terminals, without marking * Silver plated copper contacts (C) * Max. current/voltage rating with resistive load : 2A 250VAC - 3A 125VAC - 2,5A 24VDC * Dielectric strength : 2.000 Vrms 50 Hz min. betw. term. and frame 2.000 Vrms. 50 Hz min. between terminals * Electrical life : 100.000 cycles at 0,3A 24VAC or DC 10.000 cycles at full load * Packaging unit : 20 pieces 7.00 (.275) B-109 AV series Security pushbutton switches O 22 mm (.866) Options After selecting basic model number, fill in last 3 boxes with desired options. Bush./actuator material Marking Sealing BASIC MODEL BUSHING/ACTUATOR MATERIALS Flat or curved metal actuator B CODE BUSHING ACTUATOR 00 (standard) 10 12 20 30 40 80 ** Nickel plated brass Nickel plated brass Nickel plated brass Chrome plated brass Chrome plated brass Stainless steel Varnished polished brass Nickel plated brass Stainless steel Chrome plated brass Chrome plated brass Stainless steel Stainless steel Varnished polished brass CODE BUSHING ACTUATOR COLOUR 0* (standard) 2* 8* Nickel plated brass Chrome plated brass Varnished polished brass Replace * with one of the following codes. Flat thermoplastic actuator 1 : blue - 1/4 : dark blue - 2 : black - 3 : green 4 : grey - 5 : yellow - 6 : red - 7/1: white 9 : orange Select an option from each of the two tables below. MARKING - By engraving on flat or curved brass actuator (stainless steel on request) - by hot stamping on flat thermoplastic actuator 8.00 (0.314) O15.00 (0.590DIA) TYPE OF MARKING CODE TYPE 0 to 9 X Y A to N P to W 0 Numbers 0 to 9 Symbol * Symbol # Letters A to N Letters P to W Letter O Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces 1.50 (0.059) COLOUR OF MARKING CODE Brass actuator 0 (standard) 2 COLOUR Same as finish Black Note : a finished product supplied in version "0" cannot be modified to version "2". Thermoplastic actuator 2 Black 7 White SEALING Blank No sealing 2 1 K Frontal panel sealing (IP65) B-110 internal gasket external gasket www.apem.com APEM AV series New! Security pushbutton switches O 22 mm (.866) Latching - illuminated and non-illuminated ORDER FORMAT AV 1 Actuator type 03 Flat 02 Curved SERIES Bush./act. config. E Illumin. 0 No L Illum. 0 1 3 5 6 LED colour No LED Blue Green Yellow Red A OPTIONS See next page Function Terminals 2 Solder Contacts 4 PC 8 Quickconnect SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 2A 48 VDC * LED voltage and consumption : blue 3,5V 10mA, green : 2V 10mA yellow & red : 2V 20mA (a resistor must be series-connected by the user)** * Initial contact resistance : 50 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 1 000 Vrms 50 Hz min. between terminals 500 Vrms 50 Hz min. between terminals and bushing * Electrical life : 500.000 cycles at 2A 48VDC * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 9 mm (.354) max. * Operating temperature : -30C to +70C * Mechanical life : 1.000.000 cycles * Hand soldering : 300C, 4 seconds max. * Packaging unit : 20 pieces * Case : PA6T UL94-V0 * Contacts : silver * Actuator and bushing : see next page * LED CUT-OUT * Panel cut-out : O 22,2 mm (.874) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) To order a product, select a basic model below and add the desired options selected on next page. ** Resistor value = supply voltage - LED forward voltage LED forward current Standard actuator position : the actuator is flush in the non-latched position and recessed in the latched position. Hex nut 25 (.984) across flats O22.00x1.00 SI (.866DIAx1.00 IS) ON Curved actuator AV02100EA2 ON - ON 2.30 (.090) NO 1.40 (.055) - NC O15.00 (.590DIA) ON O25.00 (.984DIA) Flat actuator * AV03100EA2 3.00 (.118) 2.00 (.078) 3.80 (.149) 0.50 (.019) Non-illuminated - solder lug terminals NC 12.70 (.500) 2.80 (.110) 11.50 (.045) * Also available with prominent actuator in the non-latched position Hex nut 25 (.984) across flats O22.00x1.00 SI (.866DIAx1.00 IS) 3.00 (.118) 2.00 (.078) ON O3.20 (.125DIA) NO 1.40 (.055) - 2.30 (.090) O15.00 (.590DIA) ON O25.00 (.984DIA) Flat actuator AV031L*EA2 NC 0.50 (.019) Illuminated - solder lug terminals NC 12.70 (.500) 11.50 (.045) 2.80 (.110) Replace * with desired LED colour. APEM www.apem.com B-111 B AV series New! Security pushbutton switches O 22 mm (.866) Latching - illuminated and non-illuminated Quick-connect terminals 8.00 (.314) 3.40 (.133) Straight PC terminals 1.20 (.047) 2.40 (.094) 1.10 (.043) 2.80 (.110) Replace 2 with 4 at the end of the model numbers shown on previous page. Replace 2 with 8 at the end of the model numbers shown on previous page. B After selecting basic model number, fill in last 2 boxes with desired options. Bushing/ act. material Sealing BASIC MODEL BUSHING/ACTUATOR MATERIALS CODE BUSHING ACTUATOR 00 (std) 10 40 50 Nickel plated brass Nickel plated brass Stainless steel Stainless steel Nickel plated brass Stainless steel Stainless steel Nickel plated brass SEALING Blank No sealing 1 K 2 Frontal panel sealing (IP65) B-112 elastomeric membrane external gasket www.apem.com APEM AV series Security pushbutton switches O 22 mm (.866) or 24 mm (.944) with large actuator Momentary (combined NC/NO) ORDER FORMAT AV 22 L SERIES Bushing diameter Bush./act. config. OPTIONS Combined NC/NO P B C Bush./actuator material See next page Act. style Flat Curved Recessed SPECIFICATIONS 2 4 Terminals Solder Quickconnect MATERIALS * Max. current/voltage rating with resistive load : 5A 250VAC * Initial contact resistance : 100 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame * Electrical life : 1.000.000 cycles at 1A 250VAC 100.000 cycles at full load * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -20C to +55C * Mechanical life : 3.000.000 cycles * Front panel sealing : IP65 * Hand soldering : 300C, 5 sec. max. * Packaging unit : 20 pieces (except black chrome plated : 16 pieces) * Case : polyester, glass filled * Contacts : silver/nickel alloy * Bushing and actuator : see next page. CUT-OUT * Panel cut-out : O 22,2 mm (.874) or O 24,2 mm (.952) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) or 33 mm x 33 mm (1.299x1.299) To order a product, select a basic model below or on next page and add the desired bushing/actuator materials. BASIC MODEL Flat actuator - AV22LP O-ring Hex nut 25 (.984) across flats 3.60 (.141) 3.00 (.118) Curved actuator - AV22LB Solder lug terminals AV22LB**2 Quick-connect terminals AV22LB**4 APEM 8.60 (.338) 12.80 (.503) O22.00X1.00 SI (.866DIAX1.00 IS) 2.80X0.50 (.110X.019) 1.30 (.051) 0.50 (.019) Quick-connect terminals AV22LP**4 O20.00 (.787DIA) Solder lug terminals AV22LP**2 O26.00 (1.023DIA) 7.10 (.279) 4.00 (.157) 2.40 (.250) Recessed actuator - AV22LC Solder lug terminals AV22LC**2 Quick-connect terminals AV22LC**4 www.apem.com B-113 B AV series Security pushbutton switches O 22 mm (.866) or 24 mm (.944) with large actuator Momentary (combined NC/NO) BASIC MODEL O-ring Flat actuator - low profile - AV24LP Hex nut 27 (1.062) across flats 4.00 (.157) 1.30 (.051) Quick-connect terminals AV24LP**4 2.80X0.50 (.110X.019) O24.00X1.00 SI (.944DIAX1.00 IS) 0.50 (.019) O30.00 (1.181DIA) Solder lug terminals AV24LP**2 O20.00 (.787DIA) 7.10 (.279) 3.60 (.141) 2.40 (.250) B 1.30 (.051) Curved actuator - AV24LB Solder lug terminals AV24LB**2 Quick-connect terminals AV24LB**4 10.20 (.401) 13.00 (.511) Recessed actuator - AV24LC Solder lug terminals AV24LC**2 Quick-connect terminals AV24LC**4 BUSHING/ACTUATOR MATERIALS Models with non-anodized actuator CODE BUSHING 40 (standard) Stainless steel 20 Chrome plated brass ACTUATOR Stainless steel Chrome plated brass Models with anodized actuator CODE BUSHING ACTUATOR COLOUR 1* 2* 4* Black chrome plated brass Chrome plated brass Stainless steel Replace * with one of the following codes : 1 : blue - 2 : black - 3 : pale green - 3F : dark green - 4 : natural - 5 : gold yellow B-114 6 : red - 6B : maroon www.apem.com APEM AV series Mushroom head security pushbutton switches O 22 mm (.866) Momentary (combined NC/NO) ORDER FORMAT AV 22 PNA SERIES Bushing diameter OPTIONS Bush./act. config. Actuator colour See below Combined NC/NO 2 4 Terminals Solder Quickconnect SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 5A 250VAC * Initial contact resistance : 100 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame * Electrical life : 1.000.000 cycles at 1A 250VAC 50.000 cycles at full load * Torque : 5 Nm min.- 14 Nm max. applied to nut * Panel thickness : 1 (.039) to 6 mm (.236) max. * Operating temperature : -20C to +55C * Mechanical life : 1.000.000 cycles * Front panel sealing : IP65 * Hand soldering : 300C, 5 sec. max. * Packaging unit : 16 pieces * Case : polyester, glass filled * Contacts : silver/nickel alloy * Bushing : brass, nickel plated * Actuator : aluminium, anodized CUT-OUT * Panel cut-out : O 22,2 mm (.874) * Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) To order a product, select a basic model below and add the desired actuator colour. BASIC MODEL O-ring Hex nut 25 (.984) across flats 10.80 (.425) 8.60 (.338) 12.80 (.503) 2.80X0.50 (.110X.019) 1.30 (.051) 0.50 (.019) Quick-connect terminals AV22PNA*4 O30.00 (1.181DIA) Solder lug terminals AV22PNA*2 3.60 (.141) 7.10 (.279) 4.00 (.157) O22.00X1.00 SI (.866DIAX1.00 IS) Mushroom head actuator - AV22PNA 2.40 (.250) ACTUATOR ANODIZATION COLOURS 1 : blue - 2 : black - 3 : pale green - 3F : dark green - 4 : natural - 5 : gold yellow - 6 : red - 6B : maroon APEM www.apem.com B-115 B