2SC3184L - ON Semiconductor L.L.C.

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

NPN Triple Diffused Planar Silicon Transistor

800V/0.5A Switching Regulator Applications

Ordering number:EN1252C

2SC3184

N1098HA (KT)/90595MO (KOTO), 5137KI/O183KI/TS 8-6008, 8-5082 No.1252–1/4

Specifications

Absolute Maximum Ratings at Ta = 25˚C

Package Dimensions

unit:mm

2010C

[2SC3184]

Features

· High breakdown voltage (VCBO≥900V).

· Fast switching speed.

· Wide ASO.

˚C

Electrical Characteristics at Ta = 25˚C

1 : Base

2 : Collector

3 : Emitter

Tc=25˚C

* : The hFE1 of the 2SC3184 is classified as follows. When specifying the hFE1 rank, specify two ranks or more in principle.

PW≤300µs, Duty Cycle≤10%

JEDEC : T O-220AB

EIAJ : SC-46

02K0103L5104M02

retemaraPlobmySsnoitidnoCsgnitaRtinU

egatloVesaB-ot-rotcelloCV

OBC 009V

egatloVrettimE-ot-rotcelloCV

OEC 008V

egatloVesaB-ot-rettimEV

OBE 7V

tnerruCrotcelloCI

C5.0A

)esluP(tnerruCrotcelloCI

PC 2A

noitapissiDrotcelloCP

C03W

erutarepmeTnoitcnuJjT 051

erutarepmeTegarotSgtsT 051+ot55–

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

tnerruCffotuCrotcelloCI

OBC VBC I,V008= E0=01Aµ

tnerruCffotuCrettimEI

OBE VBE I,V5= C0=01Aµ

niaGtnerruCCD hEF 1V

EC I,V5= CAm06= *01*04

hEF 2V

EC I,V5= CAm003= 8

egatloVnoitarutaSrettimE-ot-rotcelloCV

)tas(EC ICI,Am003= BAm06= 2V

tcudorPhtdiwdnaB-niaGf

TVEC I,V01= CAm06= 51zHM

ecnaticapaCtuptuOC

bo VBC zHM1=f,V01= 02Fp

2SC3184

No.1252–2/4

Switching Time Test Circuit

retemaraPlobmySsnoitidnoC sgnitaR tinU

nimpytxam

egatloVnwodkaerBesaB-ot-rotcelloCV

OBC)RB( ICI,Am1= E0=009V

egatloVnwodkaerBrettimE-ot-rotcelloCV

OEC)RB( ICR,Am1= EB =∞008V

emiTniatsuSrettimE-ot-rotcelloC V)sus(OEC ICI,A5.0= BHm5=L,A1.0=008V

V)sus(XEC ICI,A5.0= 1B I,A1.0= 2B depmalc,Hm5=L,A1.0–=009V

emiTNO-nruTt

no ICI,Am004= 1B I,Am08= 2B Am061–= 0.1sµ

emiTegarotSt

gts ICI,Am004= 1B I,Am08= 2B Am061–= 0.3sµ

emiTllaFt

fICI,Am004= 1B I,Am08= 2B Am061–= 0.1sµ

2SC3184

No.1252–3/4

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer's

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer's products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be expor ted without obtaining the expor t license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of November, 1998. Specifications and information herein are subject

to change without notice.

2SC3184

PS No.1252–4/4