Special Purpose Fuses 2.25" 0.263" 7/8" 0.630" 3/4" LGR/LMF In-Line Fuses and LHR Holder 0.423" 0.50" Knock-out Hole 0.50" Specifications LGR Fuses Fast Acting * 300 VAC 2.25" Keyhole Punch Used as in-line protection for fluorescent fixtures, this fast acting fuse is ideal for increasing 3/4" the safety and reliability of lighting 0.50" fixtures. Voltage Rating: 0.263" 300 volts AC 7/8" Maximum Interrupting Rating: 10,000A Approvals: Standard 248-14, 0.630"UL Listed (File No: E10480) CSA Certified (File No: LR29862) 0.423" Keyhole Punch Ampere Ratings Knock-out Hole 0.50" 12 0.610" 1 112 1.82" 0.610" Fuses LMF Time-Delay * 300 VAC 0.610" 1.82" systems, Perfect for use in lighting this 300 VAC time-delay fuse is designed to handle ballast 1.82" transformer in-rush currents. 1 6 10 2 2 12 3 4 5 6 7 8 9 10 12 15 Example part number (series & amperage): LGR 1 12 Specifications Voltage Rating: Maximum Interrupting Rating: Approvals: 300 volts AC 10,000A Standard 248-14, UL Listed (File No: E10480) CSA Certified (File No: LR29862) 6 10 0.610" 1.82" 3 10 8 10 12 1 1 14 2 8 10 3 3 2 10 4 5 6 14 7 8 10 Example part number (series & amperage): LMF 2 12 LHR Fuse Holder Specifications Used as in-line protection for fluorescent fixtures, the Littelfuse LGR and LMF series fuses and LHR holder offer increased safety and reliability to lighting systems. On a 277 volt system, a fault occurring in an unfused fixture could take out the entire branch circuit 2.25"affecting as many as 100 fixtures. This could cause safety problems as well as shut down operations. Voltage Rating: Ampere Rating: Approvals: Flammability Rating: Example part number: 0.50" By individually fusing fixtures, these problems will be avoided. The 0.50" added benefits of this is the ability to quickly identify the problem fixture and reduce the repair time. 1 6 10 2 2 12 Special Purpose Fuses Ampere Ratings 2.25" 7/8" 300 volts AC LHR 000: 10A LHR 001: 10A UL Recognized 0.50" 94VO LHR 000 3/4" 0.423" Knock-out Hole Knock-out Hole Mounting Information7/8" Keyhole P 0.263" LHR 001/LHR 000 will fit keyhole punch or 0.875" knock-out hole. Anti-rotation feature is 3/4" provided when used with keyhole punch. 0.630" 0.423" 0.50" A "U-shaped" clip is available forKnock-out panel mount Hole ing (packaged 10 clips per bag): Order part number LHR OCA. Keyhole KeyholePunch Punch 2.25" Fuse holders are rated up to 10 amperes at 300 volts and are equipped with 7" 18 AWG leads. Order part number LHR 000 for two leads, and part number LHR 001 for one lead with the other terminal used for insertion of 18 AWG ballast lead. (c) 2005 Littelfuse * POWR-GARDTM Products Catalog www.littelfuse.com 0.610" 3/4" 1.82" 0.50" 0.50" 109