PRODUCT DATASHEET Boom series last update 27/9/2012 Product number CA10716_BOOM-S Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Boom RefAssy MC-E Metal 22.2 mm 13.74 mm Hexag ["tape"] Production ready Product number CA10928_BOOM-M Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Boom RefAssy MC-E Metal 22.2 mm 13.74 mm Hexag ["tape"] Production ready Product number CA10929_BOOM-W Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Boom RefAssy MC-E Metal 22.2 mm 13.74 mm Hexag ["tape"] Production ready Product number CA12957_BOOM-XW Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Boom RefAssy MC-E White 22.2 mm 13.7 mm Hexag ["tape"] Production ready FWHM Efficiency cd/lm Gerber File 20 degrees 4.120 Available FWHM Efficiency cd/lm Gerber File 36 degrees 2.010 Available FWHM Efficiency cd/lm Gerber File 54 degrees 1.160 Available FWHM Efficiency cd/lm Gerber File 70 degrees 0.670 Available April 9th 2018 12:13 Copyright Ledil Oy - Subject to change without prior notice - Page 1/2 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Boom series last update 27/9/2012 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. April 9th 2018 12:13 Copyright Ledil Oy - Subject to change without prior notice - Page 2/2 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 Relative intensity of CA12957_BOOM-MC-XW (Cree MC-E) 100% 75% 50% 25% 0% 90 80 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 A B C D LED position 4 4 22.2 Tape 0.4mm 3 3 13.7 13.4 Isometric view Scale: 3:1 2 2 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE CA10716_BOOM-S SIZE A4 SCALE D 1 PART NUMBER CA10716 3:1 WEIGHT - SHEET A 1/1