1NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
NRSJ Series
Miniature Aluminum Electrolytic Capacitors
ULTRA LOW IMPEDANCE AT HIGH FREQUENCY, RADIAL LEADS
• VERY LOW IMPEDANCE
• LONG LIFE AT 105°C (2000 hrs.)
• HIGH STABILITY AT LOW TEMPERATURE
FEATURES
CHARACTERISTICS
PRECAUTIONS
Please review the notes on correct use, safety and precautions found at
www.niccomp.com/precautions
If in doubt or uncertainty, please review your specic application - process
details with NIC’s technical support personnel: tpmg@niccomp.com
Rated Voltage Range 6.3 ~ 50Vdc
Capacitance Range 100 ~ 2,700µF
Operating Temperature Range -25° ~ +105°C
Capacitance Tolerance ±20% (M)
Maximum Leakage Current
After 2 Minutes at 20°C
0.01CV or 3µA
whichever is greater
Max. Tan δ at 120Hz/20°C
W.V. (Vdc) 6.3 10 16 25 35 50
S.V. (Vdc) 813 20 32 44 63
C < 1,500µF0.22 0.19 0.16 0.14 0.12 0.10
C = 2,200µF ~ 2,700µF0.24 0.21 0.18 0.16 - -
Low Temperature Stability
Impedance Ratio @ 120Hz Z-25°C/Z+20°C 3 3 3 3 3 3
Load Life Test at Rated W.V.
105°C 2,000 Hrs.
Capacitance Change Within ±25% of initial measured value
Tan δLess than 200% of specied value
Leakage Current Less than specied value
STANDARD PRODUCT AND CASE SIZE TABLE DΦ x L (mm)
Cap
(µF) Code Working Voltage (Vdc)
6.3 10 16 25 35
220 221 - - - - 10x12.5
330 331 - - - 10x12.5 10x16
390 391 - - - - 8x20
470 471 - - 10x12.5 10x16 10x20
680 681 - 10x12.5 10x16 10x20 -
1000 102 10x12.5 10x16 10x16 10x20 -
10x20
1500 152 10x16 10x20 10x20 - -
2200 222 10x20 - - - -
DIAMETER AND LEADSPACE (mm)
Size (D∅ x L)
Tape and Box*
NRSJ 102 M25V 10x20
Series
TB
Capacitance Code
Tolerance Code
Rated Voltage
RoHS Compliant
F
PART NUMBER SYSTEM
*see tape specication for details
Case Dia. (Dφ)810
Lead Dia. (dφ) 0.6 0.6
Lead Spacing (F) 3.5 5.0
Dim. α0.5 0.5
β = L < 16mm = 1.5mm, L > 20mm = 2.0mm
*See Part Number System for Details
RoHS
Compliant
includes all homogeneous materials
DIMENSIONS (mm)
dφ ± 0.05Sleeve
F ± 0.5
Dφ ± α
4mm
Min.
15mm Min. L + β max.
Polarity Marking
Drawing is representative of parts as supplied in bulk or
straight lead format, please see taping specication for
details on taped format packaging.
-
+