SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL02B221KP2NNNC Product : Multi-layer Ceramic Capacitor Description : CAP, 220, 10V, 10%, X7R, 01005 A. Samsung Part Number Series Size CL 02 B 221 K P 2 N N N C Samsung Multi-layer Ceramic Capacitor 01005 (inch code) Dielectric X7R Capacitance 220 10 % Capacitance L: 0.4 0.02 tolerance mm 0.2 0.02 mm W: Inner electrode Ni Termination Cu Plating Sn 100% Product Normal (Pb Free) Rated Voltage 10 V Special Reserved for future use Thickness 0.2 0.02 mm Packaging Cardboard Type,7"reel(20,000ea) B. Samsung Reliability Test and Judgement condition Performance 1.00.2Vrms More than 100Mohm Rated Voltage 60~120 sec. Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Visual inspection 250% of the rated voltage Voltage mechanical breakdown Temperature X7R Characterisitcs Adhesive Strength (From -55 to 125, Capacitance change should be within 15%) No peeling shall be occur on the 100gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.1 max. Resistance within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance within 5% Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) Moisture Capacitance change : within 12.5% 2hours 3 direction (x, y, z) With rated voltage Resistance Tan : 0.125 max Vibration Test Capacitance change : Test condition IR High Temperature Capacitance change : Resistance Tan : 0.125 max IR 402, 90~95%RH, 500+12/-0 hours : More than 25* within 12.5% With 200% of the rated voltage Max. operating temperature : More than 50* 1000+48/-0 hours Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 25 Max. operating temperature 5 cycles test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) Product specifications included in this catalogue are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers.