General Purpose Relays
Industrial Relays
KUEP Series Panel Plug-in Relay
03-2015, Rev. 0315
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
Potter & Brumfield
Coil Data
Coil voltage range 5 to 125VDC
6 to 240VAC
Coil insulation system according UL Class B
Coil versions, DC coil
Coil Rated Operate Coil Rated coil
code voltage voltage resistance power
VDC VDC Ω±10% W
One pole versions
5 5 3.75 21 1.2
6 6 4.5 32 1.125
12 12 9.0 120 1.2
24 24 18.0 472 1.25
48 48 36.0 1800 1.3
110 110 82.5 10000 1.25
125 125 93.75 13000 1.2
Two pole versions
5 5 3.75 14 1.8
6 6 4.5 20 1.8
12 12 9.0 80 1.8
24 24 18.0 320 1.8
48 48 36.0 1250 1.85
110 110 82.5 6720 1.8
125 125 93.75 8680 1.8
All figures are given for coil without preenergization, at ambient temperature +23°C.
Coil versions, AC coil
Coil Rated Operate Coil Rated coil
code voltage voltage resistance power
VAC VAC Ω±15% VA
One pole versions
6 6 5.1 6 2.0
12 12 10.2 24 2.0
24 24 20.4 85 2.0
120 120 102.0 2250 2.1
240 240 204.0 9110 2.1
Two pole versions
6 6 5.1 4.2 2.8
12 12 10.2 18 2.8
24 24 20.4 72 2.8
120 120 102.0 1700 2.9
240 240 204.0 7200 2.9
All figures are given for coil without preenergization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts 1200Vrms
between contact and coil 2200Vrms
between adjacent contacts 2200Vrms
Initial insulation resistance
between insulated elements 100MΩ
n 1 Form X, 2 Form A and 2 Form C contact arrangements
n 10 amp current rating
n Magnetic blow-out
n Various mounting options
n Indicator lamp available
Typical applications
DC load switching in industrial controls
Approvals
UL E22575; CSA LR15734; CE (KUEP-11 only)
Technical data of approved types on request
Contact Data
Contact arrangement
1 form X (NO-DM), 2 form A (NO), 2 form C (CO)
Rated voltage 150VDC
Rated current 10A
Contact material AgCdO AgSnOInO
Min. recommended contact load 300mA, 12VDC
Frequency of operation 360 ops./hour 360 ops./hour
Operate/releases time max. 15/10ms
Bounce time max. 17ms
Contact ratings
Type Load Cycles
UL 508
KUEP, 1 form X, AgCdO
10A, 150VDC 100x103
1A, 300VDC 100x103
2.5 A, 170 VDC, resistive 100x103
KUEP, 2 form A, AgCdO
5 A, 150 VDC
2.5 A, 170 VDC, resistive 100x103
KUEP, 2 form C, AgCdO
3 A, 150 VDC
2.5 A, 170 VDC, resistive 100x103
10 A, 240 VAC
10 A, 32 VDC
5 FLA, 15 LRA, 250 VAC
1/3 HP, 120 VAC
5 A, 120 VAC, tungsten
1/2 HP, 250 VAC
0.5 A, 125 VDC
10 FLA, 40 LRA, 125 VAC
3 A, 600 VAC
1/2 HP, 480 VAC
1/2 HP, 600 VAC
1 HP, 480 VAC, 3 phase
KUEP, 1 form X, AgSnOInO
10A, 150VDC, resistive 30x103
KUEP, 2 form A, AgSnOInO
5 A, 150 VDC, resistive 100x103
KUEP, 2 form C, AgSnOInO
3 A, 150 VDC, resistive 100x103
Mechanical endurance 10x106 ops.
General Purpose Relays
Industrial Relays
KUEP Series Panel Plug-in Relay (Continued)
03-2015, Rev. 0315
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
Potter & Brumfield
Other Data (Continued)
Weight 85g
Packaging/unit tray/25 pcs., box/150pcs.
Accessories
For details see datasheet Sockets and Accessories, KUP Relays
Product Code Description
27E893 DIN socket (use 20C318 clip)
27E121 Track mount socket (use 20C314 clips)
27E043 Chassis mount/solder eyelet socket (use 20C254 clip)
27E046 Chassis mount/PCB socket (use 20C254 clip)
27E067 Chassis mount/quick connect socket (use 20C254 clip)
27E396 Snap-in/quick connect socket (use 20C254 clip)
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DC coil -45ºC to 70ºC
AC coil 1 pole: -45ºC to 55ºC
2 pole: -45ºC to 45ºC
Category of environmental protection
IEC 61810 RTI - dust protected
Vibration resistance (functional) .065” double amplitude, 10-55Hz
Shock resistance (functional) 15g, 11ms (non-operating)
Terminal type Quick connects (QC), .187 or .205
PCB-THT
Terminal retention, push force
QC .205 17 lbs for 3s
QC .187 25 lbs for 3s
Dimensions
Plain case Bracket mount case
XX
X
X
1.
906 MAX.
(48.41)
1. 531 MAX.
(38.89)
1 2 3
4 5 6
7 8 9
AB
1.406 MAX.
(35.71)
1 2 3
4 5 6
7 8 9
AB
1.518 MAX.
(38.56)
1.373 ± .010
(34.87 ± .25)
1.713 ± .0 03
(43.51 ± .08)
1.989 ± .003
(50.52)
.178 TYP.
(4.52)
2.248 MAX.
(57.10)
.078 TYP.
(1.98)
1.906 MAX.
(48.41)
.75
(19.1)
2.90 MAX.
(73.7)
.078 R.
TYP.
(1.98)
X
1.531 MAX.
(38.89)
.312
TYP.
(7.92)
.375
(9.53)
.437
(11.10)
X
2.500
(63.50)
X
.625 TYP.
(15.88)
.06
(1.52)
1.406 MAX.
(35.71)
.07
(1.8)
Terminal dimensions
4.75mm (.187) quick connect 5.21mm (.205) quick connect 1.19mm (.047) printed circuit
.205± .0
02
(5.21± .05)
.156
(3.96)
.093
(2.36)
.285
(7.24)
.316 REF.
(8.03) .032
(.81)
THICKNESS
HEADER
.035
(.89)
.156
(3.96)
.032
(.81)
THICKNESS
.093
(2.36)
HEADER
.237
(6.02)
.268 REF.
(6.81)
.047
(1.19)
.180
(4.57)
.156
(3.96)
X Is For Terminal Dimensions.
See Teminal Drawings.
Top flange case Core / stud mount case
1.906 MAX.
(48.41)
X
1.43 MAX.
(36.27)
.437 .010
(11.10 .25)
.130
(3.30) 1. 74 MAX.
(44.2)
.312
(7.92)
STUD with
#6-32
THREAD
or CORE
TAPPED
#6-32
1.29 (32.8) MAX. W/ .205 (5.21) QC
1.25 (31.8) MAX. W/ .187 (4.75) QC
.125
(3.18)
.078
(1.98)
.187±.002
(4.75±.05)
.250
(6.35)
281 REF.
(7.14)
THICKNESS
.020
(.51)
HEADER
General Purpose Relays
Industrial Relays
KUEP Series Panel Plug-in Relay (Continued)
03-2015, Rev. 0315
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
3
Potter & Brumfield
Terminal assignment
1 Form X 2 Form A 2 Form C
Product code structure Typical product code KUEP -3 A 1 5 -120
Type
KUEP Enclosed relay with magnetic blow-outs
Contact arrangement and rating
3 1 form X (1 NO-DM) 7 2 form A (2 NO)
11 2 form C (2 CO)
Coil Input
A AC, 50/60Hz D DC
Mounting and options
1 Socket mount (plain) case 3 Socket mount (plain) case, with indicator lamp 1)
5 Bracket mount case A Plain case with #6-32 stud and locating tab
E Plain case with #6-32 tapped core and locating tab T Top flange case
1) Indicator lamps are available on models with the following coils: 6-24VAC and VDC, 110VDC and 120-240VAC.
Only models with 120-240VAC coils are UL recognized.
Terminal and contact material
5 4.75mm (.187in) quick connect/solder; AgCdO 6 5.21mm (.205in) quick connect/solder; AgCdO
7 1.19mm (.047in) PCB, AgCdO P 4.75mm (.187in) quick connect/solder; AgSnOInO
R 5.21mm (.205in) quick connect/solder; AgSnOInO S 1.19mm (.047in) PCB, AgSnOInO
Coil voltage
Coil code: please refer to coil versions table
Product Code Arrangement Material Coil Terminals Mounting Part Number
KUEP-3A15-120 1 Form X, 1 NO-DM AgCdO 120 VAC 4.75mm (.187in) QC Socket mount, plain case 9-1393113-4
KUEP-3D15-12 12 VDC 9-1393113-8
KUEP-3D15-24 24 VDC 1393114-1
KUEP-3D15-48 48 VDC 1393114-2
KUEP-3D15-110 110 VDC 9-1393113-7
KUEP-3D35-24 24 VDC Socket mount, plain case w/ indicator lamp 1393114-5
KUEP-7D15-24 2 Form A, 2 NO Socket mount, plain case 1-1393114-1
KUEP-11A15-120 2 Form C, 2 CO 120 VAC 8-1393113-3
KUEP-11D15-12 12 VDC 8-1393113-8
KUEP-11D15-24 24 VDC 8-1393113-7
KUEP-11D15-48 48 VDC 8-1393113-6
KUEP-11D15-110 110 VDC 8-1393113-5
46
AB AB
7
4
9
6
7
4
AB
1
9
6
3
+
++
++
Load polarity noted above is recommended for optimum arc suppression.
PCB layout
Bottom view on solder pins
1 form X version 2 form C version shown
(Omit unnecessary holes for
form A types)
.875
.626
(1
(1.93)
.626
(15.90)
.328
(8.33)
.875
(22.23)
.076 DIA. TYP.
(1.93)
.206
(5.23)