DATA SHEET Form 449-181206 PAGE 1 STANDARD AC OUTPUT MODULES Features Rugged construction 4000 volts of optical isolation between the field devices and the control logic (transient) Zero voltage turn-on and zero current turn-off DESCRIPTION AC output modules are used for controlling or switching AC loads. Each module providesup to 4000 volts (transient) of optical isolation between the field devices and the control logic. With the exception of the OAC5A5 module, all AC output modules are equivalent to a single pole, single throw, normally open contact (FORM A, SPST-NO, Make). The OAC5A5 is equivalent to a single pole, single throw, normally closed contact (FORM B, SPST-NC, Break). All AC output modules feature zero voltage turn-on and zero current turn-off. OAC5 Module Typical uses and applications for AC output modules include switching the following loads: * Relays * Solenoids * Motor starters * Heaters * Lamps or indicators Part Numbers Part Description OAC5 AC Output 12-140 VAC, 5 VDC Logic OAC5A AC Output 24-280 VAC, 5 VDC Logic OAC5H* AC Output 24-280 VAC, 5 VDC Logic, higher current rating OAC5A5 AC Output 24-280 VAC, 5 VDC Logic, NC OAC15 AC Output 12-140 VAC, 15 VDC Logic OAC15A AC Output 24-280 VAC, 15 VDC Logic OAC24 AC Output 12-140 VAC, 24 VDC Logic OAC24A AC Output 24-280 VAC, 24 VDC Logic OAC24H* AC Output 24-280 VAC, 24 VDC Logic, higher current rating * Not UL approved OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 449-181206 PAGE 2 SPECIFICATIONS General One Cycle Surge 80 amps peak Peak Repetitive Voltage 500 Volts Operating Ambient Temperature -30 to 70 C Isolation, Input-to-Output (Transient) 4,000 Vrms Minimum Load Current 20 milliamps Operating Frequency 25-65 Hz Turn-on Time 1/2 cycle maximum-zero voltage Turn-off Time 1/2 cycle maximum-zero current DV/DT - Off-State 200 volts/microseconds DV/DT - Commutating Snubbed for rated 0.5 power factor load Output Voltage Drop Maximum Peak 1.6 volts Off-State Leakage @ Nominal Voltage - 60 Hz 5 milliamps rms 2.5 milliamps rms for OAC5A OAC15A, and OAC24A @120 VAC Module Specifications Units OAC5 OAC5A OAC5H OAC5A5 (NC) OAC153 OAC15A3 OAC243 OAC24A3 OAC24H3 Line Voltage - Nominal VAC 120 240 240 120/240 120 240 120 240 240 Operating Voltage Range VAC 12-140 24-280 24-280 24-280 12-140 24-280 12-140 24-280 24-280 Current Rating @ 45 C Ambient @ 70 C Ambient amps amps 3 2 3 2 4 2 3 2 3 2 3 2 3 2 3 2 4 2 UL Motor Load Rating amps 1.5 1.5 -- * 1.5 1.5 1.5 1.5 1.5 -- 1 Logic Voltage - Nominal VDC 5 5 5 5 15 15 24 24 24 Logic Voltage Range (Vcc)2 VDC 2.5-8 2.5-8 2.5-8 2.5-8 9-16 9-16 18-32 18-32 18-32 Logic Pickup Voltage1 VDC 2.5 2.5 2.5 2.5 9 9 18 18 18 Logic Dropout Voltage VDC 1 1 1 1 1 1 1 1 1 Logic Input Current-@ Normal Logic mA Voltage (Iout in schematic diagram) 12 12 12 12 15 15 18 18 18 Control Resistance (Rc in schematic diagram) 220 220 220 220 1K 1K 2.2K 2.2K 2.2K Ohms 1 Not UL approved 2 Module only 3 Not for use with Opto 22 brains OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 449-181206 PAGE 3 DIMENSIONS OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. DATA SHEET Form 449-181206 PAGE 4 CONNECTIONS SCHEMATICS OPTO 22 * 800-321-6786 * 1-951-695-3000 * www.opto22.com * sales@opto22.com (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. More about Opto 22 PRODUCTS * Opto 22 develops and manufactures reliable, easy-to-use, open standards-based hardware and software products. Industrial automation, process control, building automation, industrial refrigeration, remote monitoring, data acquisition, and industrial internet of things (IIoT) applications worldwide all rely on Opto 22. groov EPIC(R) System Opto 22's groov Edge Programmable Industrial Controller (EPIC) system is the culmination of over 40 years of experience in designing products for the automation industry. groov EPIC gives you an industrially hardened system with guaranteed-for-life I/O, a flexible Linux(R)-based controller with gateway functions, and software for your IIoT application or any application. groov EPIC I/O Ignition Edge(R) from Inductive Automation(R), with OPC-UA drivers to Allen-Bradley(R), Siemens(R), and other control systems, and MQTT/Sparkplug communications for efficient IIoT data transfer groov Edge Appliance Visualization, data handling, and connectivity in a compact, industrial box: that's the groov Edge Appliance. Included are: * groov View for building and viewing operator interfaces on PCs and mobile * Node-RED for building simple logic flows * Ignition Edge from Inductive Automation, for OPC-UA drivers and MQTT/Sparkplug IIoT communications Older products From solid state relays (our first products) to world-famous G4 and SNAP I/O, to SNAP PAC controllers, Opto 22 products last a long time. You can count on us to give you the reliability and service you expect. I/O provides the local connection to sensors and equipment. groov I/O offers up to 24 channels on each I/O module, with a spring-clamp terminal strip, integrated wireway, and swingaway cover. QUALITY Founded in 1974, Opto 22 has established a worldwide reputation for high-quality products. All are made in the U.S.A. at our manufacturing facility in Temecula, California. Opto 22 I/O is so reliable, we can afford to guarantee it for life. groov I/O is hot swappable, UL Hazardous Locations approved, and ATEX compliant. Because we test each product twice before it leaves our factory rather than testing a sample of each batch, we can guarantee most solid-state relays and optically isolated I/O modules for life. groov EPIC Controller The heart of the system is the groov EPIC controller. It handles a wide range of digital, analog, and serial functions for data collection, remote monitoring, process control, and discrete and hybrid manufacturing. In addition, the EPIC provides secure data communications among physical assets, control systems, software applications, online services, and more, both on premises and in the cloud. Configuring and troubleshooting I/O and networking is easier with the EPIC's integrated high-resolution touchscreen. Authorized users can see your groov View HMI locally on the touchscreen or on a monitor connected via the HDMI or USB ports. groov EPIC Software Software includes: * Flowchart-based PAC Control for control programming, or build your own custom application with optional secure shell access * groov View for building and viewing your own deviceindependent HMI * Node-RED for creating simple logic flows from pre-built nodes OPTO 22 * www.opto22.com 43044 Business Park Dr. Temecula, CA 92590-3614 FREE PRODUCT SUPPORT Opto 22's California-based Product Support Group offers free, comprehensive technical support for Opto 22 products from engineers with decades of training and experience. Support is available in English and Spanish by phone or email, Monday-Friday, 7 a.m. to 5 p.m. PST. Support is always available on our website, including how-to videos, user's guides, the Opto 22 KnowledgeBase, troubleshooting tips, and OptoForums. In addition, free hands-on training is available at our Temecula, California headquarters, and you can register online. PURCHASING OPTO 22 PRODUCTS Opto 22 products are sold directly and through a worldwide network of distributors, partners, and system integrators. For more information, contact Opto 22 headquarters at 800-321-6786 (toll-free in the U.S. and Canada) or +1-951-695-3000, or visit our website at www.opto22.com. SALES * sales@opto22.com 800-321-6786 * 1-951-695-3000 SUPPORT * support@opto22.com 800-835-6786 * 1-951-695-3080 (c) 2001-2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations. Form 1335-181003