OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE 1
DATA SHEET
Form 449-181206
STANDARD AC OUTPUT MODULES
Features
Rugged construction
4000 volts of optical isolation between the field devices and
the control logic (transient)
Zero voltage turn-on and zero current turn-off
DESCRIPTION
AC output modules are used for controlling or switching AC loads.
Each module providesup to 4000 volts (transient) of optical isolation
between the field devices and the control logic.
With the exception of the OAC5A5 module, all AC output modules are
equivalent to a single pole, single throw, normally open contact
(FORM A, SPST-NO, Make). The OAC5A5 is equivalent to a single pole,
single throw, normally closed contact (FORM B, SPST-NC, Break). All
AC output modules feature zero voltage turn-on and zero current
turn-off.
Typical uses and applications for AC output modules include
switching the following loads:
•Relays
•Solenoids
•Motor starters
•Heaters
•Lamps or indicators
Part Numbers
Part Description
OAC5 AC Output 12–140 VAC, 5 VDC Logic
OAC5A AC Output 24–280 VAC, 5 VDC Logic
OAC5H* AC Output 24–280 VAC, 5 VDC Logic,
higher current rating
OAC5A5 AC Output 24–280 VAC, 5 VDC Logic, NC
OAC15 AC Output 12–140 VAC, 15 VDC Logic
OAC15A AC Output 24–280 VAC, 15 VDC Logic
OAC24 AC Output 12–140 VAC, 24 VDC Logic
OAC24A AC Output 24–280 VAC, 24 VDC Logic
OAC24H* AC Output 24–280 VAC, 24 VDC Logic,
higher current rating
* Not UL approved
OAC5 Module
PAGE 2
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Form 449-181206
SPECIFICATIONS
General
Module Specifications
One Cycle Surge 80 amps peak
Peak Repetitive Voltage 500 Volts
Operating Ambient Temperature -30 to 70 °C
Isolation, Input-to-Output (Transient) 4,000 Vrms
Minimum Load Current 20 milliamps
Operating Frequency 25–65 Hz
Turn-on Time 1/2 cycle maximum-zero voltage
Turn-off Time 1/2 cycle maximum-zero current
DV/DT - Off-State 200 volts/microseconds
DV/DT - Commutating Snubbed for rated 0.5 power factor load
Output Voltage Drop Maximum Peak 1.6 volts
Off-State Leakage
@ Nominal Voltage - 60 Hz
5 milliamps rms
2.5 milliamps rms for OAC5A OAC15A, and OAC24A @120 VAC
Units OAC5 OAC5A OAC5H OAC5A5
(NC) OAC153OAC15A3OAC243OAC24A3OAC24H3
Line Voltage - Nominal VAC 120 240 240 120/240 120 240 120 240 240
Operating Voltage Range VAC 12–140 24–280 24–280 24–280 12–140 24–280 12–140 24–280 24–280
Current Rating
@ 45 °C Ambient
@ 70 °C Ambient
amps
amps
3
2
3
2
4
2
3
2
3
2
3
2
3
2
3
2
4
2
UL Motor Load Rating amps 1.5 1.5 -- * 1.5 1.5 1.5 1.5 1.5 -- 1
Logic Voltage - Nominal VDC 5 5 5 5 15 15 24 24 24
Logic Voltage Range (Vcc)2VDC 2.5–8 2.5–8 2.5–8 2.5–8 9–16 9–16 18–32 18–32 18–32
Logic Pickup Voltage1VDC 2.5 2.5 2.5 2.5 9 9 18 18 18
Logic Dropout Voltage VDC 1 1 1 1 1 1 1 1 1
Logic Input Current-@ Normal
Logic
Voltage (Iout in schematic dia-
gram)
mA 12 12 12 12 15 15 18 18 18
Control Resistance
(Rc in schematic diagram) Ohms 220 220 220 220 1K 1K 2.2K 2.2K 2.2K
1 Not UL approved
2 Module only
3 Not for use with Opto 22 brains
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE 3
DATA SHEET
Form 449-181206
DIMENSIONS
PAGE 4
OPTO 22 • 800-321-6786 • 1-951-695-3000 • www.opto22.com • sales@opto22.com
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Form 449-181206
CONNECTIONS
SCHEMATICS
OPTO 22 • www.opto22.com SALES • sales@opto22.com SUPPORT • support@opto22.com
43044 Business Park Dr. Temecula, CA 92590-3614 800-321-6786 • 1-951-695-3000 800-835-6786 • 1-951-695-3080
© 2001–2018 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
More about Opto 22
Form 1335-181003
PRODUCTS
Opto 22 develops and manufactures reliable, easy-to-use, open
standards-based hardware and software products.
Industrial automation, process control, building automation, industrial
refrigeration, remote monitoring, data acquisition, and industrial
internet of things (IIoT) applications worldwide all rely on Opto 22.
groov EPIC® System
Opto 22’s groov Edge Programmable Industrial Controller (EPIC)
system is the culmination of over 40 years of experience in designing
products for the automation industry.
groov EPIC gives you an industrially hardened system with
guaranteed-for-life I/O, a flexible Linux®-based controller with
gateway functions, and software for your IIoT application or any
application.
groov EPIC I/O
I/O provides the local connection to
sensors and equipment. groov I/O
offers up to 24 channels on each I/O
module, with a spring-clamp terminal
strip, integrated wireway, and swing-
away cover.
Opto 22 I/O is so reliable, we can afford
to guarantee it for life. groov I/O is hot
swappable, UL Hazardous Locations
approved, and ATEX compliant.
groov EPIC Controller
The heart of the system is the groov
EPIC controller. It handles a wide range of digital, analog, and serial
functions for data collection, remote monitoring, process control, and
discrete and hybrid manufacturing.
In addition, the EPIC provides secure data communications among
physical assets, control systems, software applications, online services,
and more, both on premises and in the cloud.
Configuring and troubleshooting I/O and networking is easier with
the EPIC’s integrated high-resolution touchscreen. Authorized users
can see your groov View HMI locally on the touchscreen or on a
monitor connected via the HDMI or USB ports.
groov EPIC Software
Software includes:
•Flowchart-based PAC Control for control programming, or build
your own custom application with optional secure shell access
•groov View for building and viewing your own device-
independent HMI
•Node-RED for creating simple logic flows from pre-built nodes
•Ignition Edge® from Inductive Automation®, with OPC-UA drivers
to Allen-Bradley®, Siemens®, and other control systems, and
MQTT/Sparkplug communications for efficient IIoT data transfer
groov Edge Appliance
Visualization, data handling, and connectivity in a
compact, industrial box: that’s the groov Edge
Appliance. Included are:
•groov View for building and viewing operator
interfaces on PCs and mobile
•Node-RED for building simple logic flows
•Ignition Edge from Inductive Automation, for
OPC-UA drivers and MQTT/Sparkplug IIoT communications
Older products
From solid state relays (our first products) to world-famous G4 and
SNAP I/O, to SNAP PAC controllers, Opto 22 products last a long time.
You can count on us to give you the reliability and service you expect.
QUALITY
Founded in 1974, Opto 22 has established
a worldwide reputation for high-quality
products. All are made in the U.S.A. at our
manufacturing facility in Temecula,
California.
Because we test each product twice
before it leaves our factory rather than
testing a sample of each batch, we can
guarantee most solid-state relays and
optically isolated I/O modules for life.
FREE PRODUCT SUPPORT
Opto 22’s California-based Product Support Group offers free,
comprehensive technical support for Opto 22 products from
engineers with decades of training and experience. Support is
available in English and Spanish by phone or email, Monday–Friday,
7 a.m. to 5 p.m. PST.
Support is always available on our website, including how-to videos,
user’s guides, the Opto 22 KnowledgeBase, troubleshooting tips, and
OptoForums. In addition, free hands-on training is available at our
Temecula, California headquarters, and you can register online.
PURCHASING OPTO 22 PRODUCTS
Opto 22 products are sold directly and through a worldwide network
of distributors, partners, and system integrators. For more information,
contact Opto 22 headquarters at 800-321-6786 (toll-free in the U.S.
and Canada) or +1-951-695-3000, or visit our website at
www.opto22.com.
