BURNDY
Accessories
M-4
PENETROX E
PENETROX E consists of a non-petroleum
base vehicle in which copper granules are
suspended. Recommended for copper to
copper applications, grounding and for use
on copper conduit threads. UL listed.
Easy to apply:
1. Scratch brush the conductor surfaces until
bright and clean.
2. Immediately apply PENETROX™ to the
conductive surfaces.
3. For EHV applications, remove all excess
PENETROX™ after installation is com-
plete.
SHELF LIFE
When stored in its original container in cool
(under 100° F) dry environment, PENE-
TROX™ oxide inhibiting compound will
remain workable and functional for (5) years
from the date marked on the container pro-
vided it is mixed per instructions prior to use.
CATALOG NUMBER CONTAINER CONTAINER
PENETROX™ A PENETROX™ A-13 PENETROX™ E TYPE SIZE
PENA 1/2 ——TUBE 1/2 oz.
PEN A-4 PEN A13-4 PEN E-4 SQUEEZE BOTTLE 4 oz.
P8A PEN A13-8 PEN E-8 SQUEEZE BOTTLE 8 oz.
PEN A-1LB PENA13-1LB —CARTRIDGE 1 lb.*
PEN A-QT PEN A13-QT PEN E-QT PLASTIC TUB 1 QUART
PEN A-GAL PEN A13-GAL PEN E-GAL CAN 1 GALLON
PEN A-5GAL PEN A13-5GAL PEN E-5GAL PAIL 5 GALLONS
PEN A-55GAL PEN A13-55GAL PEN E-55GAL DRUM 55 GALLONS
* 1 lb. cartridge will fit standard caulking guns.
VALUE
PENETROX™ PENETROX™
PROPERTY DEFINITION E & A13 A
PENETRATION
(UNWORKED) 250 230
DROPPING
POINT (MIN) 500° F 230° F
POUR POINT
(MAX.) –10° F –15° F
PENETROX A,
A-13 AND E
TECHNICAL INFORMATION
PENETROX A
PENETROX A consists of a natural (petro-
leum) base vehicle in which zinc particles are
suspended. For aluminum to aluminum,
aluminum to copper applications and
aluminum conduit threads. It is not recom-
mended for use with rubber and polyethylene
insulated conductors. UL listed to 600 volts.
PENETROX A-13
PENETROX A-13 consists of a non-
petroleum base vehicle in which zinc parti-
cles are suspended. Recommended for
aluminum to aluminum, aluminum to copper
applications and aluminum conduit threads.
Compatible with insulating materials such as
rubber, or polyethylene. UL listed and recom-
mended for all voltages.
ORDERING INFORMATION
PROPERTIES OF PENETROX®
* MSDS sheets available through customer service.
The value in accordance to ASTM D217 indi-
cates the consistency of a grease. The higher
the number, the softer the grease.
The temperature at which the grease passes
from the semi-solid to a liquid state under test
conditions.
The lowest temperature at which the compound
will flow. Pour point is the lubricant’s ability to
perform in cold conditions.
