AO3434A 30V N-Channel MOSFET General Description Product Summary The AO3434A combines advanced trench MOSFET technology with a low resistance package to provide extremely low RDS(ON). This device is ideal for load switch and battery protection applications. ID (at VGS=10V) VDS 30V 4A RDS(ON) (at VGS=10V) < 52m RDS(ON) (at VGS =4.5V) < 60m RDS(ON) (at VGS =2.5V) < 78m Typical ESD protection HBM Class 3A SOT23 Top View D Bottom View D D G G S S S G Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Symbol Drain-Source Voltage VDS Gate-Source Voltage VGS TA=25C Continuous Drain Current Pulsed Drain Current C Power Dissipation B Junction and Storage Temperature Range Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Lead Rev 1: Sep. 2012 Steady-State Steady-State A 20 W 0.9 TJ, TSTG Symbol t 10s V 1.4 PD TA=70C 12 3 IDM TA=25C Units V 4 ID TA=70C Maximum 30 RJA RJL www.aosmd.com -55 to 150 Typ 70 100 63 C Max 90 125 80 Units C/W C/W C/W Page 1 of 5 AO3434A Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage IDSS Zero Gate Voltage Drain Current Conditions Min ID=250A, VGS=0V TJ=55C 10 A 1.05 1.5 V 42 52 66 82 VGS=4.5V, ID=3A 47 60 m VGS=2.5V, ID=2A 59 78 m 1 V 1.5 A Gate-Body leakage current VDS=0V, VGS=10V VDS=VGS ID=250A 0.7 ID(ON) On state drain current VGS=10V, VDS=5V 20 VGS=10V, ID=4A TJ=125C A gFS Forward Transconductance VDS=5V, ID=4A 15 VSD Diode Forward Voltage IS=1A,VGS=0V 0.75 IS Maximum Body-Diode Continuous Current DYNAMIC PARAMETERS Input Capacitance Ciss Coss Output Capacitance Reverse Transfer Capacitance Rg Gate resistance A 5 Gate Threshold Voltage Crss Units V 1 VGS(th) Static Drain-Source On-Resistance Max 30 VDS=30V, VGS=0V IGSS RDS(ON) Typ VGS=0V, VDS=15V, f=1MHz VGS=0V, VDS=0V, f=1MHz m S 245 pF 35 pF 20 pF 5 SWITCHING PARAMETERS Qg(10V) Total Gate Charge 5.7 10 nC Qg(4.5V) Total Gate Charge 2.6 5 nC Qgs Gate Source Charge VGS=10V, VDS=15V, ID=4A 0.5 nC Qgd Gate Drain Charge 1.0 nC tD(on) Turn-On DelayTime 2 ns tr Turn-On Rise Time 3.5 ns tD(off) Turn-Off DelayTime tf Turn-Off Fall Time trr Qrr VGS=10V, VDS=15V, RL=3.75, RGEN=3 IF=4A, dI/dt=500A/s Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge IF=4A, dI/dt=500A/s 22 ns 3.5 ns 6.5 ns nC 7.5 A. The value of RJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150C, using 10s junction-to-ambient thermal resistance. C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150C. Ratings are based on low frequency and duty cycles to keep initialTJ=25C. D. The RJA is the sum of the thermal impedence from junction to lead RJL and lead to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-ambient thermal impedence which is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, assuming a maximum junction temperature of TJ(MAX)=150C. The SOA curve provides a single pulse rating. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev 1: Sep. 2012 www.aosmd.com Page 2 of 5 AO3434A TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 20 20 10V VDS=5V 4.5V 15 15 ID(A) ID (A) 2.5V 10 10 125C 5 5 25C VGS=2.0V 0 0 0 1 2 3 4 0 5 100 2 3 4 Normalized On-Resistance 1.8 80 RDS(ON) (m ) 1 VGS(Volts) Figure 2: Transfer Characteristics (Note E) VDS (Volts) Fig 1: On-Region Characteristics (Note E) VGS=2.5V 60 VGS=4.5V 40 VGS=10V VGS=4.5V ID=3A 1.6 VGS=10V ID=4A 1.4 17 5 2 VGS=2.5V 10 I =2A 1.2 D 1 0.8 20 0 2 0 4 6 8 10 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 25 50 75 100 125 150 175 0 Temperature (C) Figure 4: On-Resistance vs. Junction 18Temperature (Note E) 120 1.0E+02 ID=4A 1.0E+01 100 40 80 125C 60 IS (A) RDS(ON) (m ) 1.0E+00 125C 1.0E-01 1.0E-02 1.0E-03 40 25C 25C 1.0E-04 1.0E-05 20 0 4 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev 1: Sep. 2012 2 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 5 AO3434A TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 400 VDS=15V ID=4A 350 8 Ciss Capacitance (pF) VGS (Volts) 300 6 4 250 200 150 100 Coss 2 50 0 Crss 0 0 1 2 3 4 5 Qg (nC) Figure 7: Gate-Charge Characteristics 6 0 5 10 15 20 25 VDS (Volts) Figure 8: Capacitance Characteristics 30 10000 100.0 TA=25C 10s 1000 RDS(ON) limited 100s 1.0 1ms 10ms 100 10 TJ(Max)=150C TA=25C 0.1 Power (W) ID (Amps) 10.0 10s DC 1 0.0 1E-05 0.01 0.1 1 VDS (Volts) 10 0.001 0.1 10 1000 100 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note F) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) Z JA Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TA+PDM.ZJA.RJA 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RJA=125C/W 0.1 PD 0.01 Single Pulse Ton T 0.001 1E-05 0.0001 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev 1: Sep. 2012 www.aosmd.com Page 4 of 5 AO3434A Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC DUT - Vgs Ig Charge R es istiv e S w itch ing T e st C ircu it & W a ve fo rm s RL V ds Vds DUT Vgs 90 % + Vdd VDC - Rg 1 0% Vgs V gs t d (o n ) tr t d (o ff) to n tf t o ff D iode R ecovery T est C ircuit & W aveform s Q rr = - V ds + Idt DUT V gs V ds - Isd V gs Ig Rev 1: Sep. 2012 L Isd + VD C - IF t rr dI/dt I RM V dd V dd V ds www.aosmd.com Page 5 of 5