EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Bi-Color(Multi-Color) 11-22/R6SGAC-A30/2T Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-Free. The product itself will remain within RoHS compliant version. Descriptions The 11-22 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Revision Type Material R6S AlGaInP GA InGaN Emitted Color Resin Color Brilliant Red Water Clear Brilliant Green Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 1 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Package Outline Dimensions Notes: Tolerances Unless Dimension 0.1mm, Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 2 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Power Dissipation Pd Peak Forward Current (Duty 1/10 @1KHz) IFP Electrostatic Discharge(HBM) ESD Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40~ +90 Soldering Temperature Tsol Revision R6S:50 R6S:100 R6S:120 mA GA:110 R6S:2000 V GA:150 Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 LifecyclePhase: mW GA:100 Everlight Electronics Co., Ltd. :1 mA GA:25 Rev 1 Page: 3 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Symbol Min. Typ. Max. Unit Condition Iv 450 715 --------- 1120 1800 mcd ----- 60 ----- deg ----- 632 518 ----- nm R6S GA Viewing Angle 21/2 p Peak Wavelength R6S GA IF=20mA Dominant Wavelength d R6S ----- 624 ----- GA ----- 525 ----- Spectrum Radiation R6S Bandwidth GA Forward Voltage Reverse Current VF IR ----- 20 ----- 35 R6S 1.7 2.0 2.4 GA 2.7 3.3 3.7 ----- ----- 10 50 R6S GA nm nm V A VR=5V Notes: 1.Tolerance of Luminous Intensity 11% Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 4 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Bin Range Of Luminous Intensity R6S Bin Min U 450 V 715 Max 715 1120 Unit Condition mcd IF =20mA Max 1120 1800 Unit Condition mcd IF =20mA GA Bin V W Min 715 1120 Notes: 1.Tolerance of Luminous Intensity 11% Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 5 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Typical Electro-Optical Characteristics Curves R6S Forward Current vs. Forward Voltage Ta=25C I (mA) 100 F 75 Forward Current Relative luminous intensity (%) Spectrum Distribution 50 25 0 500 550 600 650 Wavelength (nm) 50 40 30 25 20 10 0 1.2 700 Relative luminous intensity (%) Relative luminous intensity (%) 1.6 2.0 2.4 2.8 3.0 Forward Voltage V F (V) Luminous Intensity vs Forward Current Ta=25C Luminous Intensity vs. Ambient Temperature Ta=25C Ambient Temperature Ta (C) Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve Ta=25C Forward Current IF(mA) 50 40 30 20 10 0 0 20 40 60 85 100 Ambient Temperature Ta (C) Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 6 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Typical Electro-Optical Characteristics Curves GA Ta=25C Forward Current I (mA) Relative luminous intensity ( % ) Ta=25C Wavelength (nm) Forward Voltage VF (V) Relative luminous intensity ( %) Relative luminous intensity ( % ) Ta=25C Ambient Temperature Ta (C ) Forward Current I (mA) Forward Current I (mA) Ta=25C Ambient Temperature Ta (C ) Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 7 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Label explanation CAT: Luminous Intensity Rank xxxxxx xxxxxx HUE: Dom. Wavelength Rank RoHS REF: Forward Voltage Rank xxxxxxxxxxxx xxxx xxxxxxxx Reel Dimensions Note: Tolerances Unless Dimension 0.1mm,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 8 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension 0.1mm , Unit = mm Moisture Resistant Packaging Label Revision Aluminum moistue-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Label Page: 9 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 2 Temperature Cycle 3 Thermal Shock High Temperature Storage Low Temperature Storage 4 5 Revision Test Sample Hours/Cycles Size Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 10 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 11 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. 11-22/R6SGAC-A30/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 :1 LifecyclePhase: Rev 1 Page: 12 of 12 Prepared by:Yuan Shaoxiang Release Date:2008-09-20 00:16:09.0 Expired Period: Forever