11-22/R6SGAC-A30/2T - Everlight International Corp.

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 1 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

Technical Data Sheet

Chip LED with Bi-Color(Multi-Color)

11-22/R6SGAC-A30/2T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Multi-color type.

․Pb-Free.

․The product itself will remain within RoHS compliant version.

Descriptions

․The 11-22 SMD Taping is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Type Material Emitted Color Resin Color

R6S AlGaInP Brilliant Red

GA InGaN Brilliant Green Water Clear

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

Package Outline Dimensions

Notes: Tolerances Unless Dimension ±0.1mm, Unit = mm

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

Absolute Maximum Ratings (Ta=25 )℃

Parameter Symbol Rating Unit

Reverse Voltage VR5 V

Forward Current IF

R6S:50

GA:25 mA

Power Dissipation Pd R6S:100

GA:100 mW

Peak Forward Current

(Duty 1/10 @1KHz) IFP

R6S:120

GA:110 mA

Electrostatic Discharge(HBM) ESD R6S:2000

GA:150 V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40~ +90 ℃

Soldering Temperature Tsol Reflow Soldering : 260 for 10 sec.℃

Hand Soldering : 350 for 3 sec.℃

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

Electro-Optical Characteristics (Ta=25 )℃

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity Iv R6S

GA

450

715

-----

1120

1800 mcd

Viewing Angle 2θ1/2 ----- 60 ----- deg

Peak Wavelength λp R6S

GA ----- 632

518 ----- nm

Dominant

Wavelength

λd R6S

GA

-----

624

525

-----

nm

Spectrum Radiation

Bandwidth

λ△ R6S

GA

-----

20

35

----- nm

Forward Voltage VF R6S

GA

1.7

2.7

2.0

3.3

2.4

3.7

V

IF=20mA

Reverse Current IR R6S

GA

----- ----- 10

50 μA VR=5V

Notes:

1.Tolerance of Luminous Intensity ±11%

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

Bin Range Of Luminous Intensity

R6S

Bin Min Max Unit Condition

U 450 715

V 715 1120 mcd IF =20mA

GA

Bin Min Max Unit Condition

V 715 1120

W 1120 1800 mcd IF =20mA

Notes:

1.Tolerance of Luminous Intensity ±11%

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

Typical Electro-Optical Characteristics Curves

R6S

Relative luminous intensity

Ambient Temperature Ta (°C)

Forward Current Derating Curve

Ambient Temperature Ta (°C)

Forward Current F

I (mA) %)

(

Luminous Intensity vs.

Ambient Temperature

Relative luminous intensity %)

(

Forward Current I (mA)

F

Ta=25°C

Luminous Intensity vs

Forward Current

%

Relative luminous intensity ()

Spectrum Distribution

Forward Current I (mA)

F

Forward Voltage Ta=25°C

Forward Current vs.

Radiation Diagram Ta=25°C

Wavelength λ (nm) Forward Voltage V (V)

F

Ta=25°C

500

25

0

50

75

100

550 600 650 700 1.2

0

10

20

25

30

40

50

2.82.01.6 2.4 3.0

0

10

0

20

30

40

50

40

20 60 10085

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

Typical Electro-Optical Characteristics Curves

GA

Relative luminous intensity

Ambient Temperature T (°C )

a

% )

(Relative luminous intensity()%

Wavelength λ(nm)

Ta=25°C

Forward Voltage V (V)

F

Forward Current I (mA)

Relative luminous intensity ()%

Forward Current I (mA)

Ta=25°C

Ambient Temperature T (°C

a

)

Forward Current I (mA)

Ta=25°C

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

xxxxxx

xxxxxxxxxxxx

xxxx

xxxxxxxx

RoHS

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: Tolerances Unless Dimension ±0.1mm,Unit = mm

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: Tolerances Unless Dimension ±0.1mm , Unit = mm

Moisture Resistant Packaging

Aluminum moistue-proof bag LabelDesiccant

Label

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition Test

Hours/Cycles

Sample

Size Ac/Re

1 Reflow Soldering Temp. : 260 ±5

℃ ℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100 15min

℃

∫ 5 min

L : -40 15min℃

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100 5min

℃

∫ 10 sec

L : -10 5min℃

300 Cycles 22 PCS. 0/1

4High Temperature

Storage Temp. : 100℃1000 Hrs. 22 PCS. 0/1

5Low Temperature

Storage Temp. : -40℃1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7High Temperature /

High Humidity 85 / 85%RH

℃1000 Hrs. 22 PCS. 0/1

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 11 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less.

℃

2.3 After opening the package: The LED's floor life is 1 year under 30 ℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5 for 24 hours.

℃

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:09.0

EVERLIGHT ELECTRONICS CO.,LTD.

11-22/R6SGAC-A30/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 12 of 12

Device No:SZDSE-112-A02 Prepared date: 12-Jul-2007 Prepared by:Yuan Shaoxiang

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds℃

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of the

hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com